Synthesis of prebiotic galactooligosaccharides using whole cells of a novel strain, Bifidobacterium bifidum NCIMB 41171

A novel strain of Bifidobacterium bifidum NCIMB 41171, isolated from a faecal sample from a healthy human volunteer and able to express beta-galactosidase activity, was used in synthesis reactions for the production of galactooligosaccharide from lactose. The beta-galactosidase activity of whole bifidobacterial cells showed an optimum activity at pH 6.8-7.0 and 40 degrees C. The transgalactosylation activity of the B. bifidum cells from 50% (w/w) lactose resulted in a galactooligosaccharide mixture (20% w/w) comprising (w/w): 25% disaccharides, 35% trisaccharides, 25% tetrasaccharides and 15% pentasaccharides. Using different initial lactose concentrations, the conversion rate to galactooligosaccharides was maximum (35%) when 55% (w/w) lactose was used. In fermentation experiments, B. bifidum showed an increased preference towards the produced galactooligosaccharide mixture, displaying higher growth rate and short-chain fatty acid production when compared with commercially available oligosaccharides.

The key role of the western boundary in linking the AMOC strength to the north-south pressure gradient

A key idea in the study of the Atlantic meridional overturning circulation (AMOC) is that its strength is proportional to the meridional density gradient, or more precisely, to the strength of the meridional pressure gradient. A physical basis that would tell us how to estimate the relevant meridional pressure gradient locally from the density distribution in numerical ocean models to test such an idea, has been lacking however. Recently, studies of ocean energetics have suggested that the AMOC is driven by the release of available potential energy (APE) into kinetic energy (KE), and that such a conversion takes place primarily in the deep western boundary currents. In this paper, we develop an analytical description linking the western boundary current circulation below the interface separating the North Atlantic Deep Water (NADW) and Antarctic Intermediate Water (AAIW) to the shape of this interface. The simple analytical model also shows how available potential energy is converted into kinetic energy at each location, and that the strength of the transport within the western boundary current is proportional to the local meridional pressure gradient at low latitudes. The present results suggest, therefore, that the conversion rate of potential energy may provide the necessary physical basis for linking the strength of the AMOC to the meridional pressure gradient, and that this could be achieved by a detailed study of the APE to KE conversion in the western boundary current.

A green flow-based procedure for fluorimetric determination of acid-dissociable cyanide in natural waters exploiting multicommutation

A flow system designed with solenoid valves is proposed for determination of weak acid dissociable cyanide, based on the reaction with o-phthalaldehyde (OPA) and glycine yielding a highly fluorescent isoindole derivative. The proposed procedure minimizes the main drawbacks related to the reference batch procedure, based on reaction with barbituric acid and pyridine followed by spectrophotometric detection, i.e., use of toxic reagents, high reagent consumption and waste generation, low sampling rate, and poor sensitivity. Retention of the sample zone was exploited to increase the conversion rate of the analyte with minimized sample dispersion. Linear response (r=0.999) was observed for cyanide concentrations in the range 1-200 mu g L(-1), with a detection limit (99.7% confidence level) of 0.5 mu g L(-1)(19 nmol L(-1)). The sampling rate and coefficient of variation (n=10) were estimated as 22 measurements per hour and 1.4%, respectively. The results of determination of weak acid dissociable cyanide in natural water samples were in agreement with those achieved by the batch reference procedure at the 95% confidence level. Additionally to the improvement in the analytical features in comparison with those of the flow system with continuous reagent addition (sensitivity and sampling rate 90 and 83% higher, respectively), the consumption of OPA was 230-fold lower.

Effect of the Y(2)O(3)-ZrO(2) support composition on nickel catalyst evaluated in dry reforming of methane

Nickel catalysts with a load of 5 wt.% Ni, supported on pure ZrO(2) and ZrO(2) stabilized with 4 mol%, 8 mol% and 12 mol% of Y(2)O(3), were prepared by the polymerization method. The samples were characterized by X-ray diffraction (XRD), temperature-programmed reduction with hydrogen (TPR-H(2)), specific surface area (BET) and electronic paramagnetic resonance (EPR) and tested as catalysts for carbon dioxide reforming of methane. The XRD patterns showed the presence of the oxide precursor (NiO) and the tetragonal phase of a Y(2)O(3)-ZrO(2) solid solution. According to the TPR-H(2) analysis, the reduction of various NiO species was influenced by the composition of the support. Catalytic tests were conducted at 800 degrees C for 6 h, and the composition of the gaseous products and the catalytic conversion rate depended on the composition of the Y(2)O(3)-ZrO(2) solid solution and its influence on the supported NiO species. A direct relation was observed between the variation in the support, the nickel species supported on it and the performance in the catalytic tests. (C) 2008 Elsevier B.V. All rights reserved.

Personalized Communications : A Cross Media tool for the future

Personalized communication is when the marketing message is adapted to each individual by using information from a databaseand utilizing it in the various, different media channels available today. That gives the marketer the possibility to create a campaign that cuts through today’s clutter of marketing messages and gets the recipients attention. PODi is a non-profit organization that was started with the aim of contributing knowledge in the field of digital printingtechnologies. They have created a database of case studies showing companies that have successfully implemented personalizedcommunication in their marketing campaigns. The purpose of the project was therefore to analyze PODi case studies with the main objective of finding out if/how successfully the PODi-cases have been and what made them so successful. To collect the data found in the PODi cases the authors did a content analysis with a sample size of 140 PODi cases from the year 2008 to 2010. The study was carried out by analyzing the cases' measurable ways of success: response rate, conversion rate, visited PURL (personalized URL:s) and ROI (Return On Investment). In order to find out if there were any relationships to be found between the measurable result and what type of industry, campaign objective and media vehicle that was used in the campaign, the authors put up different research uestions to explore that. After clustering and merging the collected data the results were found to be quite spread but shows that the averages of response rates, visited PURL and conversion rates were consistently very high. In the study the authors also collected and summarized what the companies themselves claim to be the reasons for success with their marketing campaigns. The resultshows that the creation of a personalized campaign is complex and dependent on many different variables. It is for instance ofgreat importance to have a well thought-out plan with the campaign and to have good data and insights about the customer in order to perform creative personalization. It is also important to make it easy for the recipient to reply, to use several media vehicles for multiple touch points and to have an attractive and clever design.

Digestibility and performance of pacu (Piaractus mesopotamicus) juveniles - fed diets containing different protein, lipid and carbohydrate levels

Due to lack of information on the use of non-protein energy sources in diets for pacu (Piaractus mesopotamicus), a 2 x 2 x 3 factorial experiment was conducted to evaluate the performance and digestibility of 12 diets containing approximately two crude protein (CP; 220 and 250 g kg(-1)), two lipid (40 and 80 g kg(-1)) and three carbohydrate levels (410, 460 and 500 g kg(-1)). The pacu juveniles-fed diets containing 220 g kg(-1) CP did not respond (P > 0.05) to increased dietary lipid and carbohydrate levels, but the fish-fed diets containing 250 g kg(-1) CP showed a better feed conversion ratio. There were interactions in weight gain (WG), specific growth rate (SGR), crude protein intake (CPI) and feed conversion rate (FCR) dependent on dietary carbohydrate and lipid levels, showing positive effects of increasing carbohydrate levels only for fish-fed diets containing 80 g kg(-1) lipid level. However, when the diets contained 40 g kg(-1) lipid, the best energy productive value (EPV) results were obtained at 460 g kg(-1) carbohydrate. A higher usage of lipids (80 g kg(-1)) reduced CPI and was detrimental to protein [apparent digestibility coefficient (ADC)(CP)] and energy (ADC(GE)), but did not affect growth. The ADC(GE) improved proportionally as dietary carbohydrate levels increased (P < 0.05), increasing the concentration of digestible energy. In addition, the WG, CPI, ADC(GE) results showed best use of the energy from carbohydrates when dietary protein level was 250 g kg(-1) CP. The utilization of 250 g kg(-1) CP in feeds for juvenile pacu for optimal growth is suggested. Therefore, the optimum dietary lipid and carbohydrate levels depend on their combinations. It can be stated that pacu uses carbohydrates as effectively as lipids in the maximization of protein usage, as long as it is not lower than 250 g kg(-1) CP or approximately 230 g kg(-1) digestible protein.

Feeding strategy with alternate fasting and refeeding: effects on farmed pacu production

P>A 36-day trial was conducted to determine the effects of repetitive periods of food restriction and refeeding on growth and energy metabolism in pacu (Piaractus mesopotamicus). A total 264 juvenile fish (36.9 +/- 2.8 g) were fed with the experimental diet for 36 days using three regimes: (i) feeding daily to satiation (FD); (ii) no feed for 3 days, then feeding the same amount offered to the control groups for the next 3 days (NF/R controlled); and (iii) no feed for 3 days, then feeding to apparent satiation for the next 3 days (NF/R at satiation). The treatments were distributed into four tanks each. WG and SGR were higher in FD group. Fish refed showed hyperphagia just up to the second day of refeeding. The worst feed conversion rate and the lowest protein efficiency ratio were found in fish NF/R controlled. The lowest values of visceral fat somatic index were found in both fasted fish groups, particularly in NF/R at satiation. The LL and glycogen concentrations, and the hepatosomatic index were all elevated in both feed restricted fish. Muscle lipid showed a tendency to decrease after the cycle of fasting and refeeding. Plasma free fatty acids and glucose levels were elevated in fish subjected to feeding restrictions while serum triglycerides levels were reduced. Triiodothyronine levels were significantly depressed in fish from the NF/R-controlled group and remained at the same levels as the control fish in fish NF/R at satiation. Results indicated that fish subjected to cyclic periods of 3-day satiation or controlled feeding after 3-days of fasting were unable to achieve the final body weight of fish fed to satiation after 36 days.

Efeito do manejo alimentar no desempenho do matrinxã Brycon amazonicus em tanques de cultivo

O objetivo deste estudo foi avaliar o efeito do horário, taxa e freqüência de alimentação no desempenho do matrinxã (Brycon amazonicus) em tanques de cultivo. O trabalho foi realizado no Centro de Aqüicultura da UNESP, Jaboticabal, SP, no período de outubro de 1997 a janeiro de 1998 sendo realizados três ensaios, em tanques de 200m² subdivididos em 4 de 50 m². No ensaio I foram medidos em 3 períodos (manhã-m; meio do dia-md e tarde-t) o consumo de ração, índice de ingestão, tempo de saciação e velocidade de ingestão em peixes com peso médio de 232,13 g, alimentados com ração extrusada (32% de PB). Não foi observada diferença significativa nos parâmetros analisados. No ensaio II, em peixes com peso médio de 233,98 g, foi medido o consumo médio de ração, em intervalos de duas horas, das 07 às 19 horas. O maior consumo ocorreu quando o matrinxã foi alimentado às 17 horas. No ensaio III, durante 57 dias, os peixes foram alimentados uma vez ao dia (m); uma vez ao dia (t); duas vezes ao dia(m/t) e três vezes ao dia (m,md,t). Peixes com peso médio inicial de 322,25 g receberam ração com 32% de PB, na quantidade de 2% do PV. Não foram observadas diferenças significativas no ganho de peso diário (3,17; 2,80; 3,04 e 2,81 g) e na conversão alimentar aparente (2,11; 2,48; 2,16 e 2,31:1). Concluiu-se que a freqüência de alimentação de uma vez ao dia, em qualquer horário, mostrou ser suficiente.

Feeding level and frequency for freshwater angelfish

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Densidade de estocagem para produção de Acará-bandeira em viveiros escavados em policultivo com Camarão-da-amazônia

The aim of this study was to evaluate the production of Freshwater Angelfish (Pterophyllum scalare) in different stocking densities in cages polycultured with Amazon River Prawn (Macrobrachium amazonicum). Four treatments were evaluated (1; 2; 3 and 4 fish. 10 L(-1)) using two ponds and 24 experimental units. Water quality parameter reached adequate levels for the species. Production data were submitted to ANOVA. Fish produced in the lowest density showed higher values of final weight and standard length, and lower total biomass in comparison with the others treatments. Feed conversion rate, survival, batch uniformity and body factor were not significant different among treatments. The highest density tested produced more fish and gross yield than the others treatments. The density 20 fish. 10L(-1) is recommended to produce Freshwater Angelfish in cages polycultured with Amazon River Prawn.

Dietary supplementation of lysine and/or methionine on performance, nitrogen retention and excretion in pacu Piaractus mesopotamicus reared in cages

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fermentação alcoólica utilizando líquido da casca de coco verde como fonte de nutrientes

The liquid of the rind of green coconut (LCCV), an effluent stream from the industrial processing of green coconut rind, is rich in sugars and is a suitable feedstock for fermentation. The first step of this study was to evaluate the potential of natural fermentation of LCCV. As the literature did not provide any information about LCCV and due to the difficulty of working with such an organic effluent, the second step was to characterize the LCCV and to develop a synthetic medium to explore its potential as a bioprocess diluent. The third step was to evaluate the influence of initial condensed and hydrolysable tannins on alcoholic fermentation. The last step of this work was divided into several stages: in particular to evaluate (1) the influence of the inoculum, temperature and agitation on the fermentation process, (2) the carbon source and the use of LCCV as diluent, (3) the differences between natural and synthetic fermentation of LCCV, in order to determine the best process conditions. Characterization of LCCV included analyses of the physico-chemical properties as well as the content of DQO, DBO and series of solids. Fermentation was carried out in bench-scale bioreactors using Saccharomyces cerevisiae as inoculum, at a working volume of 5L and using 0.30% of soy oil as antifoam. During fermentations, the effects of different initial sugars concentrations (10 - 20%), yeast concentrations (5 and 7.5%), temperatures (30 - 50°C) and agitation rates (400 and 500 rpm) on pH/sugars profiles and ethanol production were evaluated. The characterization of LCCV demonstrated the complexity and variability of the liquid. The best conditions for ethanol conversion were (1) media containing 15% of sugar; (2) 7.5% yeast inoculum; (3) temperature set point of 40°C and (4) an agitation rate of 500 rpm, which resulted in an ethanol conversion rate of 98% after 6 hours of process. A statistical comparison of results from natural and synthetic fermentation of LCCV showed that both processes are similar

Extração e análise da fração lipídica da microalga monoraphidium sp., síntese e caracterização do seu biodiesel

The cultivation of microalgae biomass in order to produce biodiesel arises as an extremely promising aspect, in that the microalgae culture includes short cycle of reproduction, smaller areas for planting and residual biomass rich in protein content. The present dissertation evaluates the performance and features, through spectrometry in the region of infrared with transformed Fourier (FTIR) and spectrometry in the region of UVvisible (UV-Vis), of the extracted lipid material (LM) using different techniques of cell wall disruption (mechanical agitation at low and at high spin and agitation associated with cavitation). The technique of gas chromatography (GC) brought to light the success of alkaline transesterification in the conversion of oil into methyl monoesters (MME), which was also analyzed by spectroscopic techniques (FTIR, proton magnetic resonance (1H NMR) and carbon (13C NMR). Through thermogravimetric analysis (TGA) were analyzed the lipid material (LM), biodiesel and the microalgae biomass. The method which provided the best results concerning the efficiency in extraction of the LP of Monoraphidium sp. (12,51%) was by mechanical agitation at high spin (14 000 rpm), for 2 hours being the ideal time, as shown by the t test. The spectroscopic techniques (1H NMR, 13C NMR and FTIR) confirmed that the structure of methyl monoesters and the chromatographic data (CG) revealed a high content of saturated fatty acid esters (about 70%) being the major constituent eicosanoic acid (33,7%), which justifies the high thermal stability of microalgae biodiesel. The TGA also ratified the conversion rate (96%) of LM into MME, pointing out the quantitative results compatible with the values obtained through GC (about 98%) and confirmed the efficiency of the extraction methods used, showing that may be a good technique to confirm the extraction of these materials. The content of LM microalgae obtained (12,51%) indicates good potential for using such material as a raw material for biodiesel production, when compared to oil content which can be obtained from traditional oil for this use, since the productivity of microalgae per hectare is much larger and requires an extremely reduced period to renew its cultivation

Substituição do milho pelo triticale na alimentação de tilápias-do-nilo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Productive performance of Nile tilapia (Oreochromis niloticus) fed at different frequencies and periods with automatic dispenser

Avaliou-se o desempenho de tilápias-do-nilo (Oreochromis niloticus) produzidas em tanque-rede, providas de dispensadores automáticos de ração, alimentadas em diferentes frequências - uma vez por hora e a cada duas horas - e períodos - durante o dia, à noite ou ambos. Dezoito tanques-rede de 1.0m³ foram colocados em um tanque de 2000m² com dois metros de profundidade e renovação de água de 5%. Cento e setenta tilápias, com peso inicial de 16.0±4.9g foram distribuídas em cada tanque-rede de 1m³ e a taxa alimentar foi ajustada a cada 21 dias junto com as biometrias. As medidas foram coletadas de março a julho (outono e inverno). Observou-se diferença significativa para peso final (P<0.05) entre os tratamentos. O aumento da frequência alimentar melhorou o desempenho produtivo de tilápias-do-nilo produzidas em tanque-rede e permitiu melhor manejo alimentar. A melhor conversão alimentar para alta frequência, 24 vezes dia-1, pode resultar em uma economia de até 360kg de ração por tonelada de peixe produzido, melhorando a sustentabilidade econômica para produção de tilápia e sugerindo menor poluição ambiental.