Simulations of parasitic and intrinsic capacitances related to Multiple-Gate-Field-Effect Transistor architectures

Report for the scientific sojourn carried out at the Université Catholique de Louvain, Belgium, from March until June 2007. In the first part, the impact of important geometrical parameters such as source and drain thickness, fin spacing, spacer width, etc. on the parasitic fringing capacitance component of multiple-gate field-effect transistors (MuGFET) is deeply analyzed using finite element simulations. Several architectures such as single gate, FinFETs (double gate), triple-gate represented by Pi-gate MOSFETs are simulated and compared in terms of channel and fringing capacitances for the same occupied die area. Simulations highlight the great impact of diminishing the spacing between fins for MuGFETs and the trade-off between the reduction of parasitic source and drain resistances and the increase of fringing capacitances when Selective Epitaxial Growth (SEG) technology is introduced. The impact of these technological solutions on the transistor cut-off frequencies is also discussed. The second part deals with the study of the effect of the volume inversion (VI) on the capacitances of undoped Double-Gate (DG) MOSFETs. For that purpose, we present simulation results for the capacitances of undoped DG MOSFETs using an explicit and analytical compact model. It monstrates that the transition from volume inversion regime to dual gate behaviour is well simulated. The model shows an accurate dependence on the silicon layer thickness,consistent withtwo dimensional numerical simulations, for both thin and thick silicon films. Whereas the current drive and transconductance are enhanced in volume inversion regime, our results show thatintrinsic capacitances present higher values as well, which may limit the high speed (delay time) behaviour of DG MOSFETs under volume inversion regime.

Factores determinantes del tiempo de demora y resultados funcionales en pacientes con desprendimiento de retina rhegmatógeno primario tratado mediante vitrectomía vía pars plana

Propósito: Determinar, en los pacientes afectados de desprendimiento de retina rhegmatógeno primario que acudieron a nuestro centro, el tiempo de demora entre la aparición de los primeros síntomas y la visita con el cirujano. Los objetivos secundarios son describir los factores que han influido en este tiempo de demora, determinar la relación existente entre el tiempo de evolución del desprendimiento rhegmatógeno de retina primario, el estado de la mácula y el resultado funcional tras la cirugía, y describir la sintomatología referida por los pacientes. Material y Método: Estudio descriptivo prospectivo de 59 ojos de 59 pacientes con desprendimiento de retina rhegmatógeno primario que acudieron al servicio de oftalmología del hospital Vall d’Hebron entre marzo y junio del 2008. Se realizó una anamnesis y exploración oftalmológica detallada a su llegada, fueron sometidos a cirugía mediante vitrectomía vía pars plana y se les realizó un seguimiento mínimo de 6 meses determinando los resultados funcionales de la cirugía. Resultados: El tiempo de demora medio desde la aparición de los síntomas hasta la primera consulta con el facultativo fue de 4,10 días. La media del tiempo de evolución del desprendimiento rhegmatógeno de retina fue de 17,03 días. Un 84,1% de los pacientes con la mácula desprendida tenían un tiempo de evolución menor o igual a 15 días y un 15,9% un tiempo de evolución mayor a 15 días. La agudeza visual media postoperatoria de los pacientes con la mácula aplicada fue de 0,55 en escala decimal, en los pacientes con la mácula afectada de menos de 15 días de evolución fue de 0,41, y en los pacientes con la mácula afectada de más de 15 días de evolución fue de 0,33. El síntoma más frecuente fue la visión borrosa (98,3%), seguido de miodesopsias (28,8%). Conclusiones: El tiempo de demora entre la aparición de los primeros síntomas del DRR y la visita con el cirujano es superior desde la remisión al cirujano por parte del facultativo que desde la aparición de síntomas y consulta con el facultativo por el paciente. La subestimación de la gravedad por parte del paciente es la causa de demora referida más frecuente. Los pacientes con un mayor tiempo de evolución tienen un mayor porcentaje de afectación macular. Los pacientes con la mácula aplicada han tenido un mejor resultado funcional tras la cirugía del DRR que los pacientes con la mácula desprendida.

Spin-labeling coronary MR angiography with steady-state free precession and radial k-space sampling: initial results in healthy volunteers.

The purpose of this study was to prospectively compare free-breathing navigator-gated cardiac-triggered three-dimensional steady-state free precession (SSFP) spin-labeling coronary magnetic resonance (MR) angiography performed by using Cartesian k-space sampling with that performed by using radial k-space sampling. A new dedicated placement of the two-dimensional selective labeling pulse and an individually adjusted labeling delay time approved by the institutional review board were used. In 14 volunteers (eight men, six women; mean age, 28.8 years) who gave informed consent, signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR), vessel sharpness, vessel length, and subjective image quality were investigated. Differences between groups were analyzed with nonparametric tests (Wilcoxon, Pearson chi2). Radial imaging, as compared with Cartesian imaging, resulted in a significant reduction in the severity of motion artifacts, as well as an increase in SNR (26.9 vs 12.0, P < .05) in the coronary arteries and CNR (23.1 vs 8.8, P < .05) between the coronary arteries and the myocardium. A tendency toward improved vessel sharpness and vessel length was also found with radial imaging. Radial SSFP imaging is a promising technique for spin-labeling coronary MR angiography.

20 years of eosinophilic esophagitis in Olten county: population-based, prospective documentation of an increasing incidence

Background and Aims: Eosinophilic Esophagitis (EoE) is reported with increasing frequency over the last two decades. However, it is still unknown whether this reflects a true increase in incidence or just an increased awareness by gastroenterologists. Therefore, we evaluated the incidence and cumulative prevalence of EoE in Olten county over the last 20 years. Methods: Olten county is an area of approximately 91,000 inhabitants without pronounced demographic changes in the last two decades. EoE evaluation is based upon two gastroenterology centers and one pathology center. No public programs for increased EoE awareness were implemented in this region. All EoE patients diagnosed from 1989 to 2009 were entered prospectively into the Olten county database. Results: Fourty-six patients (76% males, mean age 41±16 yrs) were diagnosed with EoE from 1989 to 2009. Ninety-four percent presented with dysphagia. In 70% of the patients concomitant allergies were found. The number of upper endoscopies per year was stable during the entire observation period. An average annual incidence rate of 2/100,000 was found (range 0-8) with a marked increase in the period from 2001 to 2009. A current cumulative EoE prevalence of 43/100,000 inhabitants was calculated. The mean diagnostic delay (time from first symptoms to diagnosis) was 4.3 years from 1989 to 1998 and 4.8 years from 1999 to 2009. Conclusions: Over the last 20 years, a significant increase in EoE incidence was found in a stable indicator region of Switzerland. The constant rate of upper endoscopies, the constant diagnostic delay, as well as the lack of EoE awareness programs in Olten county indicate a true increase in EoE incidence.

Effects of increased intensity of intermittent training in runners with differing VO2 kinetics.

The purpose of this study was to test the hypothesis that athletes having a slower oxygen uptake ( VO(2)) kinetics would benefit more, in terms of time spent near VO(2max), from an increase in the intensity of an intermittent running training (IT). After determination of VO(2max), vVO(2max) (i.e. the minimal velocity associated with VO(2max) in an incremental test) and the time to exhaustion sustained at vVO(2max) ( T(lim)), seven well-trained triathletes performed in random order two IT sessions. The two IT comprised 30-s work intervals at either 100% (IT(100%)) or 105% (IT(105%)) of vVO(2max) with 30-s recovery intervals at 50% of vVO(2max) between each repeat. The parameters of the VO(2) kinetics (td(1), tau(1), A(1), td(2), tau(2), A(2), i.e. time delay, time constant and amplitude of the primary phase and slow component, respectively) during the T(lim) test were modelled with two exponential functions. The highest VO(2) reached was significantly lower ( P<0.01) in IT(100%) run at 19.8 (0.9) km(.)h(-1) [66.2 (4.6) ml(.)min(-1.)kg(-1)] than in IT(105%) run at 20.8 (1.0) km(.)h(-1) [71.1 (4.9) ml(.)min(-1.)kg(-1)] or in the incremental test [71.2 (4.2) ml(.)min(-1.)kg(-1)]. The time sustained above 90% of VO(2max) in IT(105%) [338 (149) s] was significantly higher ( P<0.05) than in IT(100%) [168 (131) s]. The average T(lim) was 244 (39) s, tau(1) was 15.8 (5.9) s and td(2) was 96 (13) s. tau(1) was correlated with the difference in time spent above 90% of VO(2max) ( r=0.91; P<0.01) between IT(105%) and IT(100%). In conclusion, athletes with a slower VO(2) kinetics in a vVO(2max) constant-velocity test benefited more from the 5% rise of IT work intensity, exercising for longer above 90% of VO(2max) when the IT intensity was increased from 100 to 105% of vVO(2max).

Virus infection speeds: theory versus experiment

In order to explain the speed of Vesicular Stomatitis Virus VSV infections, we develop a simple model that improves previous approaches to the propagation of virus infections. For VSV infections, we find that the delay time elapsed between the adsorption of a viral particle into a cell and the release of its progeny has a veryimportant effect. Moreover, this delay time makes the adsorption rate essentially irrelevant in order to predict VSV infection speeds. Numerical simulations are in agreement with the analytical results. Our model satisfactorily explains the experimentally measured speeds of VSV infections

Dyadic pulsations as a signature of sustainability in correspondence networks

In this paper, we introduce the concept of dyadic pulsations as a measure of sustainability in online discussion groups. Dyadic pulsations correspond to new communication exchanges occurring between two participants in a discussion group. A group that continuously integrates new participants in the on-going conversation is characterized by a steady dyadic pulsation rhythm. On the contrary, groups that either pursue close conversation or unilateral communication have no or very little dyadic pulsations. We show on two examples taken from Usenet discussion groups, that dyadic pulsations permit to anticipate future bursts in response delay time which are signs of group discussion collapses. We discuss ways of making this measure resilient to spam and other common algorithmic production that pollutes real discussions

Second differential of the entropy as a criterion for the stability in low-dimensional climate models

The second differential of the entropy is used for analysing the stability of a thermodynamic climatic model. A delay time for the heat flux is introduced whereby it becomes an independent variable. Two different expressions for the second differential of the entropy are used: one follows classical irreversible thermodynamics theory; the second is related to the introduction of response time and is due to the extended irreversible thermodynamics theory. the second differential of the classical entropy leads to unstable solutions for high values of delay times. the extended expression always implies stable states for an ice-free earth. When the ice-albedo feedback is included, a discontinuous distribution of stable states is found for high response times. Following the thermodynamic analysis of the model, the maximum rates of entropy production at the steady state are obtained. A latitudinally isothermal earth produces the extremum in global entropy production. the material contribution to entropy production (by which we mean the production of entropy by material transport of heat) is a maximum when the latitudinal distribution of temperatures becomes less homogeneous than present values

Factors influencing emergency delays in acute stroke management.

Early admission to hospital with minimum delay is a prerequisite for successful management of acute stroke. We sought to determine our local pre- and in-hospital factors influencing this delay. Time from onset of symptoms to admission (admission time) was prospectively documented during a 6-month period (December 2004 to May 2005) in patients consecutively admitted for an acute focal neurological deficit presented at arrival and of presumed vascular origin. Mode of transportation, patient's knowledge and correct recognition of stroke symptoms were assessed. Physicians contacted by the patients or their relatives were interviewed. The influence of referral patterns on in-hospital delays was further evaluated. Overall, 331 patients were included, 249 had an ischaemic and 37 a haemorrhagic stroke. Forty-five patients had a TIA with neurological symptoms subsiding within the first hours after admission. Median admission time was 3 hours 20 minutes. Transportation by ambulance significantly shortened admission delays in comparison with the patient's own means (HR 2.4, 95% CI 1.6-3.7). The only other factor associated with reduced delays was awareness of stroke (HR 1.9, 95% CI 1.3-2.9). Early in-hospital delays, specifically time to request CT-scan and time to call the neurologist, were shorter when the patient was referred by his family or to a lesser extent by an emergency physician than by the family physician (p < 0.04 and p < 0.01, respectively) and were shorter when he was transported by ambulance than by his own means (p < 0.01). Transportation by ambulance and referral by the patient or family significantly improved admission delays and early in-hospital management. Correct recognition of stroke symptoms further contributed to significant shortening of admission time. Educational programmes should take these findings into account.

Effectiveness of Work Zone Intelligent Transportation Systems, TPF-5(081), 2013

In the last decade, Intelligent Transportation Systems (ITS) have increasingly been deployed in work zones by state departments of transportation. Also known as smart work zone systems they improve traffic operations and safety by providing real-time information to travelers, monitoring traffic conditions, and managing incidents. Although there have been numerous ITS deployments in work zones, a framework for evaluating the effectiveness of these deployments does not exist. To justify the continued development and implementation of smart work zone systems, this study developed a framework to determine ITS effectiveness for specific work zone projects. The framework recommends using one or more of five performance measures: diversion rate, delay time, queue length, crash frequency, and speed. The monetary benefits and costs of ITS deployment in a work zone can then be computed using the performance measure values. Such ITS computations include additional considerations that are typically not present in standard benefit-cost computations. The proposed framework will allow for consistency in performance measures across different ITS studies thus allowing for comparisons across studies or for meta analysis. In addition, guidance on the circumstances under which ITS deployment is recommended for a work zone is provided. The framework was illustrated using two case studies: one urban work zone on I-70 and one rural work zone on I-44, in Missouri. The goals of the two ITS deployments were different – the I-70 ITS deployment was targeted at improving mobility whereas the I-44 deployment was targeted at improving safety. For the I-70 site, only permanent ITS equipment that was already in place was used for the project and no temporary ITS equipment was deployed. The permanent DMS equipment serves multiple purposes, and it is arguable whether that cost should be attributed to the work zone project. The data collection effort for the I-70 site was very significant as portable surveillance captured the actual diversion flows to alternative routes. The benefit-cost ratio for the I-70 site was 2.1 to 1 if adjusted equipment costs were included and 6.9 to 1 without equipment costs. The safety-focused I-44 ITS deployment had an estimated benefit-cost ratio of 3.2 to 1.

Report on Fly Ash as a Soil Additive, MLR-81-03, 1981

The addition of a selected self-cementing, Class C fly ash to blow sand soils improves their compacted strength greatly as opposed to the minimal strength improvement when fly ash is mixed with loess soil. By varying the percentage of fly ash added, the resulting blow sand-fly ash mixture can function as a low strength stabilized material or as a higher strength sub-base. Low strength stabilized material can also be obtained by mixing loess soils with a selected Class C fly ash. The development of the higher strength values required for subbase materials is very dependent upon compaction delay time and moisture condition of the material. Results at this time indicate that, when compaction delays are involved, excess moisture in the material has the greatest positive effect in achieving minimum strengths. Other added retarding agents, such as borax and gypsum, have less effect.

Development of an activity index for adult eosinophilic esophagitis: international experts propose dysphagia, withish exudates on endoscopy and peripheral eosinophilia as items with closest association to EoE activity

Background and Aims: Eosinophilic Esophagitis (EoE) is reported with increasing frequency over the last two decades. However, it is still unknown whether this reflects a true increase in incidence or just an increased awareness by gastroenterologists. Therefore, we evaluated the incidence and cumulative prevalence of EoE in Olten county over the last 20 years. Methods: Olten county is an area of approximately 91,000 inhabitants without pronounced demographic changes in the last two decades. EoE evaluation is based upon two gastroenterology centers and one pathology center. No public programs for increased EoE awareness were implemented in this region. All EoE patients diagnosed from 1989 to 2009 were entered prospectively into the Olten county database. Results: Fourty-six patients (76% males, mean age 41±16 yrs) were diagnosed with EoE from 1989 to 2009. Ninety-four percent presented with dysphagia. In 70% of the patients concomitant allergies were found. The number of upper endoscopies per year was stable during the entire observation period. An average annual incidence rate of 2/100,000 was found (range 0-8) with a marked increase in the period from 2001 to 2009. A current cumulative EoE prevalence of 43/100,000 inhabitants was calculated. The mean diagnostic delay (time from first symptoms to diagnosis) was 4.3 years from 1989 to 1998 and 4.8 years from 1999 to 2009. Conclusions: Over the last 20 years, a significant increase in EoE incidence was found in a stable indicator region of Switzerland. The constant rate of upper endoscopies, the constant diagnostic delay, as well as the lack of EoE awareness programs in Olten county indicate a true increase in EoE incidence.

Are open mandibular fractures still an emergency?

INTRODUCTION: Early surgical management is often advocated for fractures of the tooth-bearing portion of the mandible. A 6-hour delay has been mentioned for the fixation of these fractures. Our aim was to bring this paradigm into question. METHODS: All patients referred to our department from September 2012 to May 2014 for fractures of the tooth-bearing portion of the mandible were retrospectively included. For each patient, age, gender, aetiology of the fracture, and characteristics of the fractures were recorded. Tobacco and/or alcohol addictions, diabetes and mandibular dental condition were taken into account. We also noticed the preoperative delay and the occurrence of complications such as: haematoma, infection, wound dehiscence, osteosynthesis failure and pseudarthrosis. RESULTS: Among the 47 patients referred, 36 were treated with a delay of more than 6hours (76.6%). In 88.8% of the cases, the reason for this delay was unavoidable. The mean delay time from trauma to surgery was 52hours (range: 7-312). Forty-nine percent of the patients had comorbidities. Complications occurred in 6 patients leading to an overall complication rate of 16.67%. A statistically significant higher complication rate was observed among smokers (P=0.006). No statistical relationship was found between the delay and the occurrence of complications (P=0.994). This study suggests that fractures of the tooth-bearing portion of the mandible should no longer be considered as an emergency that must be treated within a 6-hour delay.

Spare Part Management of Bubbling Fluidized Bed Boiler

Energy generation industry is very capital-intensive industry. Productivity and availability requirements have increased while competition and quality requirement have increased. Maintenance has a significant role that these requirements can be reached. Even maintenance is much more than repairing faults nowadays, spare parts are important part of maintenance. Large power boilers are user-specific therefore features of boilers vary from project to project. Equipment have been designed to follow the customer’s requirements therefore spare parts are mainly user-specific also. The study starts with literature review introducing maintenance, failure mechanisms, and systems and equipment of bubbling fluidized bed boiler. At the final part spare part management is discussed from boiler technology point of view. For this part of the study science publications about spare part management are utilized also some specialist from a boiler technology company and other original equipment manufacturers were interviewed. Spare part management is challenging from the boiler supplier point of view and the end user of spare parts has a responsibility of stocking items. Criticality analysis can be used for finding most critical devices of the process and spare part management shall focus to those items. Spare parts are part of risk management. Stocking spare parts is increasing costs but then high spare part availability is decreasing delay time caused by fault of item.

Temporal and Spatial Behavior of Electron Density and Temperature in a Laser-Produced Plasma from YBa2Cu3O7

Spectroscopic studies of laser -induced plasma from a high-temperature superconducting material, viz., YBa2Cu3O7 (YBCO), have been carried out. Electron temperature and electron density measurements were made from spectral data. The Stark broad ening of emission lines was used to determine the electron density, and the ratio of line in tensities was exploited for the determination of electron temperature. An initial electron temperature of 2.35 eV and electron density of 2.5 3 1017 cm2 3 were observed. The dependence on electron temperature and density on different experimental parameters such as distance from the target, delay time after the in itiation of the plasm a, and laser irradiance is also discussed in detail. Index Headings: Laser -plasma spectroscopy; Plasma diagnostics; Emission spectroscop y; YBa2Cu3O7.