The 1958 pearl oyster fishery, Gulf of Mannar

The continental shelf between the three and twelve fathom lines, off the Ceylon coast in the Gulf of Mannar is popularly known as the Pearl Banks. Though the area of this plateau is extensive the pearl oysters are concentrated on restricted areas known as "paars". The more productive of these are the Cheval Group of paars and the Moderagam Paar. The Peria Paar and Twynam's Paar though covering larger areas are not dependable as oyster beds. The True Vankalai, Peria Paar Karai and Muthuvarathu Paars are small in extent, but have yielded oysters on a commercial scale. Although the Ceylon Pearl Banks has been commercially fished for centuries, the first scientific investigation of its pearl oysters on an intensive scale was started by Herdman in 1902 (1902-06) and later continued by Hornell (1905-41), Shipley (1904-06), Pearson (1911-33), Jameson (1912-13), Southwell (1910-14) and Malpas (1922-39).

Phosphate treatment of frozen prawns. Pt. 1. Screening of various phosphates for prevention of drip loss

Various phosphates and their mixtures were screened for their efficiency of preventing drip loss in frozen prawns. The effectiveness of the phosphates decreased in the following order: Sodium tripolyphosphate — Sodium pyrophosphate — Sodium hexametaphosphate Sodium metaphosphate — Sodium dihydrogen phosphate; the last two being ineffective. Even though thaw drip loss was reduced by the above treatments the organoleptic quality of the thawed as well as cooked products was unsatisfactory, discoloration being the major defect. A solution of a mixture of 12% sodium tripolyphosphate and 8.6% sodium dihydrogen phosphate or 2% citric acid in water when used as dip prevented thaw drip loss, improved cooked yield and organoleptic quality without adversely affecting the biochemical characteristics. Commercial scale trials showed that the results are highly reproducible.

Indigenous substitutes for "Lignum vitae" for making stern bearings for fishing boats

Difficulties are very often encountered in selecting proper material for making stern bearings for fishing boats. Conventional materials such as white metal, bronze etc. wear out too fast also causing considerable wear to the propeller shaft. Lignum-vitae, a natural wood commonly used for this purpose, is not available on a commercial scale in our country. Results of trials carried out to find out suitable substitutes for lignum-vitae from among indigenous timbers are presented in this paper.

Ice storage characteristics of fresh and brined shark fillets

Ice storage characteristics of fresh and brined fillets from fresh shark (Carcharias melanopterus) were studied in and out of contact with ice for more than two weeks. Changes occurring in biochemical constituents, physical qualities and bacterial counts of the fillets are reported. Shelf life of brined fillets out of contact with ice was considerably longer than that of control samples tinder similar conditions. Icing of shark fillets is suggested as a method for the removal of urea on a commercial scale.

A new one-boat mid-water trawl for Indian waters

Even though the rich and variegated pelagic fishery resources of our west coast are well known much has to be done for a judicial and systematic exploitation on a commercial scale. To fill up this lacuna the present paper describes in detail a new design of 10.5 m four-equal panel mid-water trawl, its rigging and operation from a medium size vessel. Comprehensive comparative efficiency studies of this gear with a 10.5m unequal panel mid-water trawl established the superiority of the new gear. From the results based on the mouth opening, resistance and the catch it is opined that this new gear can not only be used on a commercial scale in harvesting the seasonal pelagic fishery, but also as a secondary supporting gear in shrimp fishery in places like Veraval, where there is a commercially exploitable yield of quality fishes like hilsa, pomfret, seer etc., without much modification from conventional stern trawlers.

Design of a detachable type fish drier

The paper describes the design of a detachable type fish drier which has been designed to operate on commercial scale. The drier with a raw material capacity of one tons has been designed after effecting all improvements on the design of the existing tunnel driers available in India. The cost of one drier works out to Rs. 2,16,700/- approximately.

Identification and determination of muscle's fatty acids and amino acids in Cobia and Indian squid

The present study aims to find the effect of freezing Time on the quality of Cobia (Rastrelliger kanagurta) and Indian Squid in commercial scale during freezing and subsequent frozen storage (−18◦C). Total time for freezing was significantly different (P<0.05) between the Cobia and Indian squid samples. The difference in the freezing time could be attributed to the varied quality of the 2 samples. Upon freezing, the moisture content decreased in Indian Squide samples compared to Cobia freezer where protein content decreased in both the samples. Upon freezing and during frozen storage, lipid oxidation products (peroxide value, and free fatty acid value) and volatile bases (total volatile base nitrogen) showed an increasing trend in both the samples with values slightly higher in Indian squid samples compared to cobia frozen samples. The total plate counts showed a significantly (P<0.05) decreasing trend in both the samples. K value did not show any significant (P<0.05) difference between the samples whereas the histamine formation was significantly (P<0.05) increased in Indian squid frozen samples compared to cobia samples. The taste and overall acceptability was significantly different (P<0.05) in cobia samples compared to Indian squid frozen samples on 5th month. Both samples were in acceptable condition up to 5 month but the Cobia frozen samples quality was slightly better than the air blast frozen samples.

The potential for clupeid fishery in Lake Kainji, Nigeria

The potential for a clupcid fishery in Lake Kainji has been examined using both experimental fishing samples and the results obtained from those of the commercial fishermen. A total annual production of 1,400 tons has been estimated. In money terms, this amounls to N198.800 (£99,400) per annum. This production has been sustained by the abundant zooplankton food available the year round on the lake. Recommendations for the effective methods of cropping clupeids were made, bearing in mind the need to maintain the fishery on a sustained yield basis. The place of c1upeids in the ecology of the lake was examined and on the basis of the evidence available it was recommended that Pellonula afzeluisi could be exploited on a large commercial scale without any adverse effects on the fishery in the lake.

Kinetic modelling of growth and storage molecule production in microalgae under mixotrophic and autotrophic conditions.

In order to improve algal biofuel production on a commercial-scale, an understanding of algal growth and fuel molecule accumulation is essential. A mathematical model is presented that describes biomass growth and storage molecule (TAG lipid and starch) accumulation in the freshwater microalga Chlorella vulgaris, under mixotrophic and autotrophic conditions. Biomass growth was formulated based on the Droop model, while the storage molecule production was calculated based on the carbon balance within the algal cells incorporating carbon fixation via photosynthesis, organic carbon uptake and functional biomass growth. The model was validated with experimental growth data of C. vulgaris and was found to fit the data well. Sensitivity analysis showed that the model performance was highly sensitive to variations in parameters associated with nutrient factors, photosynthesis and light intensity. The maximum productivity and biomass concentration were achieved under mixotrophic nitrogen sufficient conditions, while the maximum storage content was obtained under mixotrophic nitrogen deficient conditions.

Kinetic modelling of growth and storage molecule production in microalgae under mixotrophic and autotrophic conditions

In order to improve algal biofuel production on a commercial-scale, an understanding of algal growth and fuel molecule accumulation is essential. A mathematical model is presented that describes biomass growth and storage molecule (TAG lipid and starch) accumulation in the freshwater microalga Chlorella vulgaris, under mixotrophic and autotrophic conditions. Biomass growth was formulated based on the Droop model, while the storage molecule production was calculated based on the carbon balance within the algal cells incorporating carbon fixation via photosynthesis, organic carbon uptake and functional biomass growth. The model was validated with experimental growth data of C. vulgaris and was found to fit the data well. Sensitivity analysis showed that the model performance was highly sensitive to variations in parameters associated with nutrient factors, photosynthesis and light intensity. The maximum productivity and biomass concentration were achieved under mixotrophic nitrogen sufficient conditions, while the maximum storage content was obtained under mixotrophic nitrogen deficient conditions. © 2014 Elsevier Ltd.

Influence of catalyst layer structure on the current distribution of PEMFCs

A modified subcell approach was adopted to evaluate the current density distributions of proton exchange membrane fuel cells (PEMFCs) with different electrodes. Conventional hydrophobic electrodes showed better performance under flooding conditions compared to hydrophilic electrodes. The thin-film hydrophilic electrode performed better in the absence of liquid water, but it was more readily flooded. A composite catalyst layer was designed with 2/3 of the area from the inlet prepared hydrophilic and the remaining 1/3 area hydrophobic. The composite catalyst layer with commercial scale dimension showed notable enhanced performance in the concentration polarization region. (C) 2004 The Electrochemical Society.

Mass culture of Undaria gametophyte clones and their use in sporeling culture

Undaria pinnatifida (Harv.) Sur. is one of the three main seaweed species under commercial cultivation in China. In the mid-1990s the annual production was about 20000 tons dry. The supply of healthy sporelings is key to the success of commercial cultivation of Undaria. Previous studies demonstrated that instead of the zoospore collection method, sporelings can be cultured through the use of gametophyte clones. This paper reports the experimental results on mass culture of clones and sporeling raising in commercial scale. Light had an obvious effect on growth of gametophyte clones. Under an irradiance of 80 mumol m(-2) s(-1) and favorable temperature of 22-25degreesC, mean daily growth rate may reach as high as 37%. Several celled gametophyte fragments were sprayed onto the palm rope frame. Gametogenesis occurred after 4-6 days. Juvenile sporeling growth experiments showed that nitrate and phosphate concentrations of 2.9 10(-4) mol 1(-1) and 1.7 10(-5) mol 1(-1) were sufficient to enable the sporelings to maintain a high daily growth rate. Sporelings can reach a length of 1 cm in a month. Since 1997, extension of the clone technique has been carried out in Shandong Province. Large-scale production of sporelings for commercial cultivation of 14 and 31 hectares in 1997 and 1998 had been conducted successfully.

Translocation of assimilates in Undaria and its cultivation in China

Undaria cultivation on a commercial scale began in China only in the last decade. Today, Undaria pinnatifida is the main species under cultivation concentrated in two provinces, Liaoning and Shandong. The annual production in the early nineties was 8000-13 000 tons dry weight, which is two or three times the pre-1980 figures. The raft cultivation method maintaining the alga at the desired depths generally ensures the light saturated rate of photosynthesis on clear days, and enhances production. Under the cultivated condition, the calculated annual primary productivity of this alga is 160 g C m(-2) y(-1). Translocation of C-14-labelled photoassimilates in rapidly growing sporophyte of Undaria pinnatifida was studied in the open sea. Samples from different parts of the blade with counterparts exposed to tracer ((NaHCO3)-C-14) showed that the translocation that occurred mainly from the tip of the blade to the growing region had obvious source-sink relationship. It took 20 minutes to translocate the labelled photoassimilates from the epidermis, via cortex, to the medulla of the midrib, where rates of translocation averaging 42-48 cm h(-1) were observed in the open sea. Production experiments of tip-cutting of the blades showed an increased production of 9%.

Encouraging clean energy investment in developing countries: what role for aid?

A large portion of foreign assistance for climate change mitigation in developing countries is directed to clean energy facilities. To support international mitigation goals, however, donors must make investments that have effects beyond individual facilities. They must reduce barriers to private-sector investment by generating information for developers, improving relevant infrastructure, or changing policies. We examine whether donor agencies target financing for commercial-scale wind and solar facilities to countries where private investment in clean energy is limited and whether donor investments lead to more private investments. On average, we find no positive evidence for these patterns of targeting and impact. Coupled with model results that show feed-in tariffs increase private investment, we argue that donor agencies should reallocate resources to improve policies that promote private investment in developing countries, rather than finance individual clean energy facilities.

Engineering passive bioreactive barriers: risk-managing the legacy of industrial soil and groundwater pollution

Permeable reactive barriers are a technology that is one decade old, with most full-scale applications based on abiotic mechanisms. Though there is extensive literature on engineered bioreactors, natural biodegradation potential, and in situ remediation, it is only recently that engineered passive bioreactive barrier technology is being considered at the commercial scale to manage contaminated soil and groundwater risks. Recent full-scale studies are providing the scientific confidence in our understanding of coupled microbial (and genetic), hydrogeologic, and geochemical processes in this approach and have highlighted the need to further integrate engineering and science tools.