Kawasaki syndrome: Cluster analysis of incident cases presenting to a pediatric tertiary care hospital in Texas from January 1, 2005 to December 31, 2009

Background: Despite almost 40 years of research into the etiology of Kawasaki Syndrome (KS), there is little research published on spatial and temporal clustering of KS cases. Previous analysis has found significant spatial and temporal clustering of cases, therefore cluster analyses were performed to substantiate these findings and provide insight into incident KS cases discharged from a pediatric tertiary care hospital. Identifying clusters from a single institution would allow for prospective analysis of risk factors and potential exposures for further insight into KS etiology. ^ Methods: A retrospective study was carried out to examine the epidemiology and distribution of patients presenting to Texas Children’s Hospital in Houston, Texas, with a diagnosis of Acute Febrile Mucocutaneous Lymph Node Syndrome (MCLS) upon discharge from January 1, 2005 to December 31, 2009. Spatial, temporal, and space-time cluster analyses were performed using the Bernoulli model with case and control event data. ^ Results: 397 of 102,761 total patients admitted to Texas Children’s Hospital had a principal or secondary diagnosis of Acute Febrile MCLS upon over the 5 year period. Demographic data for KS cases remained consistent with known disease epidemiology. Spatial, temporal, and space-time analyses of clustering using the Bernoulli model demonstrated no statistically significant clusters. ^ Discussion: Despite previous findings of spatial-temporal clustering of KS cases, there were no significant clusters of KS cases discharged from a single institution. This implicates the need for an expanded approach to conducting spatial-temporal cluster analysis and KS surveillance given the limitations of evaluating data from a single institution.^

Cluster analysis of high-dimensional data: A case study

Normal mixture models are often used to cluster continuous data. However, conventional approaches for fitting these models will have problems in producing nonsingular estimates of the component-covariance matrices when the dimension of the observations is large relative to the number of observations. In this case, methods such as principal components analysis (PCA) and the mixture of factor analyzers model can be adopted to avoid these estimation problems. We examine these approaches applied to the Cabernet wine data set of Ashenfelter (1999), considering the clustering of both the wines and the judges, and comparing our results with another analysis. The mixture of factor analyzers model proves particularly effective in clustering the wines, accurately classifying many of the wines by location.

Issues of robustness and high dimensionality in cluster analysis

Finite mixture models are being increasingly used to model the distributions of a wide variety of random phenomena. While normal mixture models are often used to cluster data sets of continuous multivariate data, a more robust clustering can be obtained by considering the t mixture model-based approach. Mixtures of factor analyzers enable model-based density estimation to be undertaken for high-dimensional data where the number of observations n is very large relative to their dimension p. As the approach using the multivariate normal family of distributions is sensitive to outliers, it is more robust to adopt the multivariate t family for the component error and factor distributions. The computational aspects associated with robustness and high dimensionality in these approaches to cluster analysis are discussed and illustrated.

The bereavement response : a cluster analysis

BACKGROUND: Literature and clinical experience suggest that some people experience atypical, complicated or pathological bereavement reactions in response to a major loss. METHOD: Three groups of community-based bereaved subjects--spouses (n = 44), adult children (n = 40), and parents (n = 36)--were followed up four times in the 13 months after a loss. A 17-item scale of core bereavement times was developed and used to investigate the intensity of the bereavement response over time. RESULTS: Cluster analysis revealed a pattern of bereavement-related symptoms approximating a syndrome of chronic grief in 11 (9.2%) of the 120 subjects. None of the respondents displayed a pattern consistent with delayed or absent grief. CONCLUSIONS: In a non-clinical community sample of bereaved people, delayed or absent grief is infrequently seen, unlike chronic grief, which is demonstrated in a minority.

Contextualizing the tensions and weaknesses of information privacy and data breach notification laws

Data breach notification laws have detailed numerous failures relating to the protection of personal information that have blighted both corporate and governmental institutions. There are obvious parallels between data breach notification and information privacy law as they both involve the protection of personal information. However, a closer examination of both laws reveals conceptual differences that give rise to vertical tensions between each law and shared horizontal weaknesses within both laws. Tensions emanate from conflicting approaches to the implementation of information privacy law that results in different regimes and the implementation of different types of protections. Shared weaknesses arise from an overt focus on specified types of personal information which results in ‘one size fits all’ legal remedies. The author contends that a greater contextual approach which promotes the importance of social context is required and highlights the effect that contextualization could have on both laws.

Why evolutionary realism underpins evolutionary economic analysis and theory

This paper offers a reply to Jochen Runde's critical appraisal of the ontological framework underpinning Dopfer and Potts's (2008) General Theory of Economic Evolution. We argue that Runde's comprehensive critique contains several of what we perceive to be misunderstandings in relation to the key concepts of ‘generic’ and ‘meso’ that we seek here to unpack and redress.

Use of hierarchical cluster analysis to assess the representativeness of a baseline groundwater quality monitoring network: comparison of New Zealand’s national and regional groundwater monitoring programs

Baseline monitoring of groundwater quality aims to characterize the ambient condition of the resource and identify spatial or temporal trends. Sites comprising any baseline monitoring network must be selected to provide a representative perspective of groundwater quality across the aquifer(s) of interest. Hierarchical cluster analysis (HCA) has been used as a means of assessing the representativeness of a groundwater quality monitoring network, using example datasets from New Zealand. HCA allows New Zealand's national and regional monitoring networks to be compared in terms of the number of water-quality categories identified in each network, the hydrochemistry at the centroids of these water-quality categories, the proportions of monitoring sites assigned to each water-quality category, and the range of concentrations for each analyte within each water-quality category. Through the HCA approach, the National Groundwater Monitoring Programme (117 sites) is shown to provide a highly representative perspective of groundwater quality across New Zealand, relative to the amalgamated regional monitoring networks operated by 15 different regional authorities (680 sites have sufficient data for inclusion in HCA). This methodology can be applied to evaluate the representativeness of any subset of monitoring sites taken from a larger network.

Segmenting Australian high school students : two-step cluster analysis preliminary results

A one size fits all approach dominates alcohol programs in school settings (Botvin et al., 2007), which may limit program effectiveness (Snyder et al., 2004). Programs tailored to the meet the needs and wants of adolescent groups may be more effective. Limited attention has been directed towards employing a full segmentation process. Where segmentation has been examined, the focus has remained on socio-demographic characteristics and more recently psychographic variables (Mathijssen et al., 2012). The current study aimed to identify whether the addition of behaviour could be used to identify segments. Variables included attitudes towards binge drinking (α = 0.86), behavioral intentions’ (α = 0.97), perceived behavioral control (PBC), injunctive norms (α = 0.94); descriptive norms (α = 0.87), knowledge and reported behaviour. Data was collected from five schools, n = 625 (32.96% girls). Two-Step cluster analysis produced a sample (n = 625) with a silhouette measure of cohesion and separation of 0.4. The intention measure and whether students reported previously consuming alcohol were the most distinguishing characteristics - predictor importance scores of (1.0). A four segment solution emerged. The first segment (“Male abstainers” – 37.2%) featured the highest knowledge score (M: 5.9) along with the lowest-risk drinking attitudes and intentions to drink excessively. Segment 2 (“At risk drinkers” - 11.2%) were characterised by their high-risk attitudes and high-risk drinking intentions. Injunctive (M: 4.1) and descriptive norms (M: 4.9) may indicate a social environment where drinking is the norm. Segment 3 (”Female abstainers” – 25.9%) represents young girls, who have the lowest-risk attitudes and low intentions to drink excessively. The fourth and final segment (boys = 67.4%) (“Moderate drinkers” – 25.7%) all report previously drinking alcohol yet their attitudes and intentions towards excessive alcohol consumption are lower than other segments. Segmentation focuses on identifying groups of individuals who feature similar characteristics. The current study illustrates the importance of including reported behaviour in addition to psychographic and demographic characteristics to identify unique groups to inform intervention planning and design. Key messages The principle of segmentation has received limited attention in the context of school-based alcohol education programs. This research identified four segments amongst 14-16 year high school students, each of which can be targeted with a unique, tailored program to meet the needs and wants of the target audience.

Statistical, electrical and mathematical analysis of water treed cross-linked polyethylene cable insulation

This work examined a new method of detecting small water filled cracks in underground insulation ('water trees') using data from commecially available non-destructive testing equipment. A testing facility was constructed and a computer simulation of the insulation designed in order to test the proposed ageing factor - the degree of non-linearity. This was a large industry-backed project involving an ARC linkage grant, Ergon Energy and the University of Queensland, as well as the Queensland University of Technology.

Cluster analysis of rainfall stations of the Indian peninsula

Principal component analysis is applied to derive patterns of temporal variation of the rainfall at fifty-three stations in peninsular India. The location of the stations in the coordinate space determined by the amplitudes of the two leading eigenvectors is used to delineate them into eight clusters. The clusters obtained seem to be stable with respect to variations in the grid of stations used. Stations within any cluster occur in geographically contiguous areas.

Classification of Indian meteorological stations using cluster and fuzzy cluster analysis, and Kohonen artificial neural networks

The present study deals with the application of cluster analysis, Fuzzy Cluster Analysis (FCA) and Kohonen Artificial Neural Networks (KANN) methods for classification of 159 meteorological stations in India into meteorologically homogeneous groups. Eight parameters, namely latitude, longitude, elevation, average temperature, humidity, wind speed, sunshine hours and solar radiation, are considered as the classification criteria for grouping. The optimal number of groups is determined as 14 based on the Davies-Bouldin index approach. It is observed that the FCA approach performed better than the other two methodologies for the present study.

Conformational analysis and design of cross-strand disulfides in antiparallel beta-sheets

Cross-strand disulfides bridge two cysteines in a registered pair of antiparallel beta-strands. A nonredundant data set comprising 5025 polypeptides containing 2311 disulfides was used to study cross-strand disulfides. Seventy-six cross-strand disulfides were found of which 75 and 1 occurred at non-hydrogen-bonded (NHB) and hydrogen-bonded (HB) registered pairs, respectively. Conformational analysis and modeling studies demonstrated that disulfide formation at HB pairs necessarily requires an extremely rare and positive chi(1) value for at least one of the cysteine residues. Disulfides at HB positions also have more unfavorable steric repulsion with the main chain. Thirteen pairs of disulfides were introduced in NHB and HB pairs in four model proteins: leucine binding protein (LBP), leucine, isoleucine, valine binding protein (LIVBP), maltose binding protein (MBP), and Top7. All mutants LIVBP T247C V331C showed disulfide formation either on purification, or on treatment with oxidants. Protein stability in both oxidized and reduced states of all mutants was measured. Relative to wild type, LBP and MBP mutants were destabilized with respect to chemical denaturation, although the sole exposed NHB LBP mutant showed an increase of 3.1 degrees C in T-m. All Top7 mutants were characterized for stability through guanidinium thiocyanate chemical denaturation. Both exposed and two of the three buried NHB mutants were appreciably stabilized. All four HB Top7 mutants were destabilized (Delta Delta G(0) = -3.3 to -6.7 kcal/mol). The data demonstrate that introduction of cross-strand disulfides at exposed NHB pairs is a robust method of improving protein stability. All four exposed Top7 disulfide mutants showed mild redox activity. Proteins 2011; 79: 244-260. (C) 2010 Wiley-Liss, Inc.

Examining the Effectiveness of Discriminant Function Analysis and Cluster Analysis in Species Identification of Male Field Crickets Based on Their Calling Songs

Traditional taxonomy based on morphology has often failed in accurate species identification owing to the occurrence of cryptic species, which are reproductively isolated but morphologically identical. Molecular data have thus been used to complement morphology in species identification. The sexual advertisement calls in several groups of acoustically communicating animals are species-specific and can thus complement molecular data as non-invasive tools for identification. Several statistical tools and automated identifier algorithms have been used to investigate the efficiency of acoustic signals in species identification. Despite a plethora of such methods, there is a general lack of knowledge regarding the appropriate usage of these methods in specific taxa. In this study, we investigated the performance of two commonly used statistical methods, discriminant function analysis (DFA) and cluster analysis, in identification and classification based on acoustic signals of field cricket species belonging to the subfamily Gryllinae. Using a comparative approach we evaluated the optimal number of species and calling song characteristics for both the methods that lead to most accurate classification and identification. The accuracy of classification using DFA was high and was not affected by the number of taxa used. However, a constraint in using discriminant function analysis is the need for a priori classification of songs. Accuracy of classification using cluster analysis, which does not require a priori knowledge, was maximum for 6-7 taxa and decreased significantly when more than ten taxa were analysed together. We also investigated the efficacy of two novel derived acoustic features in improving the accuracy of identification. Our results show that DFA is a reliable statistical tool for species identification using acoustic signals. Our results also show that cluster analysis of acoustic signals in crickets works effectively for species classification and identification.

Grouping materials and processes for the designer: an application for cluster analysis.

In this paper, an analytical tool - cluster analysis - that is commonly used in biology, archaeology, linguistics and psychology is applied to materials and design. Here we use it to cluster materials and the processes that shape them, using their attributes as indicators of relationship. The attributes that are chosen are important to design and designers. The resulting clusters, and the classifications that can be developed from them, depend on the selected attributes and - to some extent - on the method of clustering. Alternative classifications for design that is focused on the technical or aesthetic attributes of materials and the materials and shapes allowed by processes are explored.