Tree and Brush Control For County Road Right-of-Way, Ocotober 2002

This manual summarizes the roadside tree and brush control methods used by all of Iowa's 99 counties. It is based on interviews conducted in Spring 2002 with county engineers, roadside managers and others. The target audience of this manual is the novice county engineer or roadside manager. Iowa law is nearly silent on roadside tree and brush control, so individual counties have been left to decide on the level of control they want to achieve and maintain. Different solutions have been developed but the goal of every county remains the same: to provide safe roads for the traveling public. Counties in eastern and southern Iowa appear to face the greatest brush control challenge. Most control efforts can be divided into two categories: mechanical and chemical. Mechanical control includes cutting tools and supporting equipment. A chain saw is the most widely used cutting tool. Tractor mounted boom mowers and brush cutters are used to prune miles of brush but have significant safety and aesthetic limitations and boom mowers are easily broken by inexperienced operators. The advent of tree shears and hydraulic thumbs offer unprecedented versatility. Bulldozers are often considered a method of last resort since they reduce large areas to bare ground. Any chipper that violently grabs brush should not be used. Chemical control is the application of herbicide to different parts of a plant: foliar spray is applied to leaves; basal bark spray is applied to the tree trunk; a cut stump treatment is applied to the cambium ring of a cut surface. There is reluctance by many to apply herbicide into the air due to drift concerns. One-third of Iowa counties do not use foliar spray. By contrast, several accepted control methods are directed toward the ground. Freshly cut stumps should be treated to prevent resprouting. Basal bark spray is highly effective in sensitive areas such as near houses. Interest in chemical control is slowly increasing as herbicides and application methods are refined. Fall burning, a third, distinctly separate technique is underused as a brush control method and can be effective if timed correctly. In all, control methods tend to reflect agricultural patterns in a county. The use of chain saws and foliar sprays tends to increase in counties where row crops predominate, and boom mowing tends to increase in counties where grassland predominates. For counties with light to moderate roadside brush, rotational maintenance is the key to effective control. The most comprehensive approach to control is to implement an integrated roadside vegetation management (IRVM) program. An IRVM program is usually directed by a Roadside Manager whose duties may be shared with another position. Funding for control programs comes from the Rural Services Basic portion of a county's budget. The average annual county brush control budget is about $76,000. That figure is thought not to include shared expenses such as fuel and buildings. Start up costs for an IRVM program are less if an existing control program is converted. In addition, IRVM budgets from three different northeastern Iowa counties are offered for comparison in this manual. The manual also includes a chapter on temporary traffic control in rural work zones, a summary of the Iowa Code as it relates to brush control, and rules on avoiding seasonal disturbance of the endangered Indiana bat. Appendices summarize survey and forest cover data, an equipment inventory, sample forms for record keeping, a sample brush control policy, a few legal opinions, a literature search, and a glossary.

Decision criteria for optimizing postemergence johnsongrass control in soybean crops in Argentina

Field studies were established in Zavalla and Oliveros, Argentina, during four years in order to optimize Johnsongrass (Sorghum halepense (L.) Pers.) chemical control by means of the thermal calendar model in comparison with other criteria (weed height or days after sowing). The effect of three application dates of postemergence herbicides was determined by visual control, density of tillers originated from rhizome bud regrowth, and from crown and shoot bud regrowth, and soybean yield. Following the thermal calendar model criterion, applications during the second date afforded the best control. Weed height for the first date showed little variability between experiments but was highly variable in the second and third application dates, achieving in some cases values greater than 120 cm. For all years, no significant differences were detected for crop yield between the first and second application dates, and yields were always lower for the third date. The greatest rhizome bud regrowth was observed for the earliest application date and the highest crown and shoot bud regrowth was determined for the last application date. Parameters associated with control efficiency showed the best behaviour for the second date. However, plant height at this moment may interfere with herbicide application and the variability exhibited by this parameter highlights the risk of determining control timing using only one decision criterion.

Cultivar response to fungicide application in relation to rice blast control, productivity and sustainability

Four field trials were conducted, from 1995 to 1997, with the objective of studying the response of four upland cultivars to foliar fungicide application in relation to panicle blast control, grain yield and sustainability. Differential disease control and yield response of cultivars to fungicide treatment were obtained. Losses in grain yield of cultivars IAC 202, Caiapó, Rio Paranaíba and Araguaia due to panicle blast were 44.8%, 27.4%, 24.4% and 18.2%, respectively. Two applications of tricyclazole or benomyl controlled panicle blast, as indicated by lower values of disease progress curve and relative panicle blast severity, and increased grain yield of the cultivar IAC 202. The losses in 100 panicle grain weight and grain yield were significantly reduced by 22.3% and 25.1% in IAC 202 and 23.6% and 20.5% in Caiapó, respectively, with two sprays of tricyclazole. Sustainable value index for yield was maximum with two applications of tricyclazole (0.59), followed by one application at booting (0.46) and at heading (0.40) in cultivar IAC 202. Results showed no yield response of the cultivars Rio Paranaíba and Araguaia to fungicide applications for panicle blast control.

Occurence of thrips on Niagara table grape and its control with the insecticides thiacloprid and methiocarb associated with Metarhizium anisopliae

Thrips are reported as important pests on table grapes in United States and several countries of Europe. Damage caused by thrips, particulary Frankliniella occidentalis, was observed on niagara table grape crop in Limeira-SP, Brazil. During the blooming period, high thrips densities were observed feeding on pollen and small berries. The symptoms left were more visible after the development of the berries and were characterized by dark scars and suberized surface on berries, sometimes causing the berry to crack, and the seed to prolapse. The effect of insecticides thiacloprid or methiocarb, associated or not with the entomopathogenic fungus Metarhizium anisopliae were evaluated during the blooming period. For evaluation of thrips damage on fruits, the treatments were applied three additional times, 7, 14 and 21 days after the first application. The treatments were: a) M. anisopliae (strain 1037) 1x10(7) conidia/mL; b) thiacloprid 20mL/100L; c-d) methiocarb 100 and 150mL/100L; e) methiocarb 100mL/100L + M. anisopliae 1x10(7) conidia/mL. Only methiocarb, associated or not with the fungus, was effective in reducing thrips infestation, and no phytotoxic damage was observed. The efficiency of methiocarb 150mL/100L and the insecticide associated with the fungus for the control of the thrips population was 84.2 and 95.5%, respectively. In both cases, there was a reduction of approximately 70% in the number of berries with scars symptoms. For control of thrips on table grapes, chemical insecticides associated or not with M. anisopliae should be applied during the blooming period of the crop.

Comparación de la eficacia de distintos productos químicos aplicados mediante tratamiento aéreo en el control del muérdago (Viscum album) sobre Pinus halepensis

El objetivo de este trabajo fue comparar la eficacia de diversos productos químicos en el control del muérdago (Viscum album var austriacum) sobre Pinus halepensis. La experiencia consistió en la aplicación mediante tratamiento aéreo de diversas concentraciones de etefon, ácido giberélico y glifosato. Las combinaciones de ácido giberélico y glifosato obtuvieron las mayores eficacias, especialmente la que aplicó 7,8 g/ha de ácido giberélico y 540 g/ha de glifosato.

Herbicide efficacy on Borreria densiflora control in pre- and post-emergence conditions

The weed Borreria densiflora is a management issue in soybean and sugarcane crops from North and Northeastern Brazil. Knowledge upon chemical control of B. densiflora contributes to the integrated management of this weed species, especially when active ingredient options become reduced due to the selection of herbicide resistant or tolerant weed species. Experiments in pre- and post-emergence of B. densiflora were conducted in greenhouse, in a randomized block design and four replications. In pre-emergence, the dose-response curve methodology was used and 7 herbicides were tested. In post-emergence, 9 herbicides at the recommended rate and 4 herbicide mixtures were tested. For pre and post-emergence conditions, evaluations were conducted at 60 and 21 days after treatment (DAT), respectively, and the variables analyzed were weed control and dry weight (%). The results showed options of pre-emergent herbicides that can be used for controlling B. densiflora, especially in sugarcane, where chemical weed control is mainly based on pre-emergent applications. In the current glyphosate resistance scenario, one should consider the use of pre-emergent herbicides within an integrated management of B. densiflora. For satisfactory post-emergence control, B. densiflora plants should be sprayed at the phenological stage of up to three pairs of leaves. Herbicide mixtures have been and will continue to be an important tool in chemical weed management, broadening the spectrum of weed control, while diversifying herbicide mechanisms of action, which helps to prevent or delay the appearance of herbicide resistance.

Application Volumes and Sizes of Droplets for the Application of Diquat Herbicide in the Control of Eichhornia crassipes

The objective of this study was to evaluate the efficiency of application and the efficacy of control of water hyacinth (Eichhornia crassipes) with the use of the diquat herbicide done with two application volumes associated to three droplets classes. Three experiments were conducted; in the first, the application efficiency was evaluated; in the second, the control efficiency and; in the third, the droplet spectrum. They were conducted in a completely randomized design with five, four and six replicates, respectively. The treatments were arranged in a 2 x 3 factorial design, with two application volumes (100 and 200 L ha-1) and three droplets classes (fine, extremely coarse and ultra-coarse) to the first and second experiment and the third comprised two diquat concentrations in spray solution (2 and 4 g i.a. L-1) and three droplets classes (fine, extremely coarse and ultra-coarse). The application efficiency was determined by the coverage by droplets, spray deposition and active ingredient of the herbicide (diquat). The efficacy was measured by the control and the percentage of plants with regrowth at 50 days after application. The spectrum of droplets produced per each nozzle model used to obtain the droplets classes were analyzed. According to the parameters analyzed, using the droplets classes extremely thick and ultra thick can provide greater certainty in the application of diquat in the aquatic environment associated with the deposition of the active and sufficient coverage to control Eichhornia crassipes with both application volumes

Fire blight (Erwinia amylovora) of rosaceous plants. Pathogen virulence and selection and characterization of biological control agents

El fuego bacteriano, causado por Erwinia amylovora, es una enfermedad muy importante a nivel comercial y económico porque afecta a plantas de la familia de las rosáceas y es especialmente agresiva en manzano (Pyrus malus) y peral (Pyrus communis), así como en plantas ornamentales (Crataegus, Cotoneaster o Pyracantha). Esta enfermedad está distribuida por todo el mundo en zonas climáticas templadas de Amércia del Norte, Nueva Zelanda, Japón, Israel, Turquí y Europa. En España, el fuego bacteriano fue detectado por primera vez en 1995 en el norte del País (Euskadi) y más tarde en nuevos focos aparecidos en otras áreas. La enfermedad puede ser controlada comercialmente mediante la aplicación de pesticidas quimicos (derivados de cobre, antibioticos). Sin embargo, muchos de los productos químicos presentan baja actividad o causan fitotoxicidad, y la estreptomicina, el producto más eficaz, esta prohibido en muchos países, incluyendo España. Por tanto, en ausencia de apropiados agentes químicos, el control biológico se contempla como una buena alternativa. En el presente trabajo, un agente de control biológico, Pseudomonas fluorescens EPS62e, ha sido seleccionada de entre 600 aislados de las especies P. fluorescens y Pantoea agglomerans obtenidos de flores, frutos y hojas de plantas de la familia de las rosáceas durante una prospección llevada a cabo en varias áreas geográficas de España. La cepa ha sido seleccionada por su capacidad de suprimir la infecciones producidas por E. amylovora frutos inmaduros, flores y brotes de peral en condiciones de ambiente controlado, presentando unos niveles de control similares a los obtenidos mediante el control químico usando derivados de cobre o antibióticos. La cepa además ha mostrado la capacidad de colonizar y sobrevivir en flores y heridas producidas en frutos inmaduros en condiciones de ambiento controlado pero también en flores en condiciones de campo. La exclusión de E. amylovora medinate la colonización de la superficie, el consumo de nutrientes, y la interacción entre las células del patógeno y del agente de biocontrol es la principal causa de la inhibición del fuego bacteriano por la cepa EPS62e. Estas características constituyen aspectos interesantes para un desarrollo efectivo de la cepa EPS62e como un agente de biocontrol del fuego bacteriano en condiciones comerciales.

Control of Two-Photon Absorption in Organic Compounds by Pulse Shaping: Spectral Dependence

In this work, we investigate the control of the two-photon absorption process of a series of organic compounds via spectral phase modulation of the excitation pulse. We analyzed the effect of the pulse central wavelength on the control of the two-photon absorption process for each compound. Depending on the molecules` two-photon absorption position relative to the excitation pulse wavelength, different levels of coherent control were observed. By simulating the two-photon transition probability in molecular systems, taking into account the band structure and its positions, we could explain the experimental results trends. We observed that the intrapulse coherent interference plays an important role in the nonlinear process control besides just the pulse intensity modulation.

Preliminary studies on the effects of d-limonene to workers of the leaf-cutting ant Atta sexdens rubropilosa and its implications for control

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effects of plant densities and management of purple nutsedge on sugarcane yield and effect of growth stages and main way of herbicides contact and absorption on the control of tubers

Field experiments carried out with Cyperus rotundus L. at low (58-246), medium (318773), and high (675-1198 shoots/m(2)) densities showed sugarcane yield reductions of 13.5, 29.3, and 45.2%, respectively in relation to the control. In the second field experiment, the integration of a mechanic method with two sequences of plowing and disking operations in the dry season, and complementary applications of trifloxysulfuron-sodium + ametrine and sulfentrazone (rainy season) was studied. Average of the chain connected to original shoot showed 92, 95, and 65% of reduction with trifloxysulfuron-sodium + ametrine and surfactant, at the application stages early, preflowering, and full flowering, respectively.

Late pest control in determinate tomato cultivars

O uso de plantas inseticidas e de variedades pode ser forte aliado ao Manejo Integrado de Pragas (MIP), podendo reduzir o número de aplicações de inseticidas e minimizar seus efeitos ao homem e ao meio ambiente. em condições de campo, visando o controle de pragas tardias do tomateiro em duas cultivares de crescimento determinado, compararam-se as seguintes táticas de controle: a) Convencional - pulverizações com os produtos metamidofós, buprofezin, acefato, cipermetrina, abamectina, permetrina, teflubenzuron e lufenuron, aplicados em intervalos de três a seis dias; b) MIP - nível de ação de cada praga para aplicações de imidacloprid, triflumuron, lufenuron e abamectina; c) MIP - Azadirachta indica (nim) - nível de ação de cada praga para aplicações de óleo de nim (1,2% de azadiractina) a 0,5%. As táticas de controle MIP e MIP - nim foram eficientes no controle das pragas tardias do tomateiro, quando a pressão da população é baixa, não diferindo do tratamento convencional que apresentou as menores médias de infestação. As táticas de controle convencional, MIP e MIP-nim promoveram maiores produções do tomateiro, com incrementos de até 74%. O número de pulverizações foi reduzido em até 77% com as táticas MIP e MIP - nim, comparado ao método convencional. O produto nim pode ser alternativa promissora no controle de pragas tardias do tomateiro em campo, que se ajusta ao MIP.

Effects of Different Periods of Clomazone plus Hexazinona Permanence in Soil and Sugarcane Mulch before the Occurrence of Rain on Weed Control Efficacy

The objective of this work was to evaluate the efficacy of the formulated mixture clomazone and hexazinone applied in soil or combined with sugarcane mulch, after different periods of permanence without the occurrence of rain. The experiment was carried out in vases under greenhouse conditions in Botucatu, São Paulo, Brazil. The weeds Brachiaria decumbens, Ipomoea grandifolia, Ipomoea hederifolia and Euphorbia heterophylla were sown and covered or not with sugarcane mulch. The experiment was arranged in a complete randomized design with four repetitions. The treatments were displaced in a 3x6 factorial scheme, with the factors being six periods without rain (0, 3, 7, 15, 30, and 60 days) and three modes of herbicide application(on the soil without sugarcane mulch, on and under sugarcane mulch). Control evaluations were carried out at 10, 21, 35 and 42 days after the occurrence of rain. The clomazone + hexazinone mixture promoted an excellent weed control for all the species studied when applied on, under, or without sugarcane mulch. However, the control levels tended to reduce for periods over 60 days without rain.

Application methods and dosages of thiamethoxam in thrips control on tomato plants

O tripes Frankliniella schultzei Trybom (Thysanoptera: Thripidae) é um dos mais importantes vetores de tomato spotted wilt tospovirus (TSWV) na cultura do tomate no Brasil. Dois métodos de aplicação do inseticida thiamethoxam foram comparados no controle de tripes em tomate. O experimento foi conduzido em delineamento de blocos ao acaso com sete tratamentos e quatro repetições. Utilizou-se um pulverizador costal manual com lança simples provida de ponta de pulverização com jato cônico vazio JD 14-2 ou modificada, com aplicador tipo esguicho, em substituição à ponta de pulverização. Dosagens de 150 e 200 g i.a. ha-1 foram usadas em única aplicação com esguicho e 50 g i.a. ha-1 em pulverizações semanais, iniciadas aos 48 dias após a semeadura. A eficiência do inseticida em teste foi comparada com diafenthiuron (400 g i.a. ha-1), profenofos + cypermethrin (320+32 g i.a. ha-1, respectivamente) e methamidophos (60 g i.a. 100 L-1 de água), aplicados em pulverização. Não houve diferença estatística entre os métodos de aplicação e doses com thiamethoxam no controle de F. schultzei aos 24 dias após a aplicação, sendo vantajosa a realização de uma única aplicação das maiores dosagens de thiamethoxam com esguicho em comparação às aplicações semanais da menor dosagem em pulverização. A eficiência de controle do tripes com o inseticida thiamethoxam variou de 93 a 95%, nos diferentes métodos e dosagens em teste. Diafenthiuron e profenofos + cypermethrin apresentaram eficiência menor (78 e 88%, respectivamente), porém foram superiores às obtidas com methamidophos (71%). Os produtos e doses utilizados não causaram fitotoxicidade às plantas de tomate.

Effect of doses of fungicides and plant resistance activators on the control of Rhizoctonia foliar blight of soybean, and on Rhizoctonia solani AG1-IA in vitro development

Rhizoctonia foliar blight (RFB) of soybean [Glycine max (L.) Merrill] occurs in many tropical and subtropical regions, causing yield reductions of up to 70% and in Brazil, up to 60%. The disease is caused by Rhizoetonia solani AG1-IA and AG1-IB, and by AG2-3 in Japan. RFB occurs in the North, Northeast and Mid-west regions of Brazil. Chemical control remains the only effective method of controlling RFB, but its efficiency depends upon environmental conditions. In this study, 18 fungicides, salicylic acid (SA) and acibenzolar-s-methyl (ASM) were evaluated on R. solani AG1-IA in vitro, by mycelial growth rating and estimating effective concentration for 50% (EC 50) and 90% (EC 90) inhibition of mycelial growth, and in vivo by reduction of disease severity on soybean plants in greenhouse conditions. Mycelial growth was strongly inhibited by the fungicides pyraclostrobin + boscalid and fludioxonil. Preventive fungicide applications were the most effective. Strobilurins were more efficient both in preventive and curative applications. Best results with plant resistance activators were obtained with SA (2.5 mM) sprayed at 20 d before inoculation and with ASM (12.5 mg a.i. l(-1)) 10 d before inoculation. (c) 2005 Elsevier Ltd. All rights reserved.