Influence of type wave and angle of incidence on seismic bending moments in pile foundations.

[EN]When analysing the seismic response of pile groups, a vertically-incident wavefiel is usually employed even though it doesnot necessarily correspond to the worst case scenario. This work aims to study the influence of both type of seismic body wave and its angle of incidence on the dynamic response of pile foundations.

Influence of pile inclination angle on the dynamic properties and seismic response of piled structures.

[EN] This paper aims to contribute to clarify whether the use of battered piles has a positive or negative influence on the dynamic response of deep foundations and superstructures. For this purpose, the dynamic response of slender and non-slender structures supported on several configurations of 2X2 and 3X3 pile groups including battered elements is obtained through a procedure based on a substructuring model whick takes soil-structure interaction into account.

Safety factors in sheet pile wall design: considerations by using traditional methods and FEM analysis

The purpose of the work is: define and calculate a factor of collapse related to traditional method to design sheet pile walls. Furthermore, we tried to find the parameters that most influence a finite element model representative of this problem. The text is structured in this way: from chapter 1 to 5, we analyzed a series of arguments which are usefull to understanding the problem, while the considerations mainly related to the purpose of the text are reported in the chapters from 6 to 10. In the first part of the document the following arguments are shown: what is a sheet pile wall, what are the codes to be followed for the design of these structures and what they say, how can be formulated a mathematical model of the soil, some fundamentals of finite element analysis, and finally, what are the traditional methods that support the design of sheet pile walls. In the chapter 6 we performed a parametric analysis, giving an answer to the second part of the purpose of the work. Comparing the results from a laboratory test for a cantilever sheet pile wall in a sandy soil, with those provided by a finite element model of the same problem, we concluded that:in modelling a sandy soil we should pay attention to the value of cohesion that we insert in the model (some programs, like Abaqus, don’t accept a null value for this parameter), friction angle and elastic modulus of the soil, they influence significantly the behavior of the system (structure-soil), others parameters, like the dilatancy angle or the Poisson’s ratio, they don’t seem influence it. The logical path that we followed in the second part of the text is reported here. We analyzed two different structures, the first is able to support an excavation of 4 m, while the second an excavation of 7 m. Both structures are first designed by using the traditional method, then these structures are implemented in a finite element program (Abaqus), and they are pushed to collapse by decreasing the friction angle of the soil. The factor of collapse is the ratio between tangents of the initial friction angle and of the friction angle at collapse. At the end, we performed a more detailed analysis of the first structure, observing that, the value of the factor of collapse is influenced by a wide range of parameters including: the value of the coefficients assumed in the traditional method and by the relative stiffness of the structure-soil system. In the majority of cases, we found that the value of the factor of collapse is between and 1.25 and 2. With some considerations, reported in the text, we can compare the values so far found, with the value of the safety factor proposed by the code (linked to the friction angle of the soil).

L'Aquila - Laboratori di ricerca e coworking nel nucleo industriale di Pile

Progetto di riqualificazione urbana di un'area industriale attraverso il riordino del verde. Inserimento di laboratori di ricerca e incubatori d'impresa e coworking e riorganizzazione degli impianti sportivi preesistenti.

Fondazioni a pozzo per pile da ponte. Confronti fra diversi modelli di interazione con il terreno

Descrizione dei vantaggi della tecnologia delle fondazioni da pozzo per le pile da ponte. Analisi dei carichi di un viadotto esistente a struttura mista e studio agli stati limite delle più svantaggiose condizioni di carico. Analisi sismica della pila. Progetto e verifica della pila, del plinto e del pozzo nelle diverse fasi di realizzazione e per le combinazioni di carico considerate. Verifiche del terreno, con riferimento ai criteri di dimensionamento del Prof. Jamiolkowski. Analisi tenso-deformativa del terreno con software Plaxis2D e Midas-GTS (3D). Confronti fra il metodo analitico adottato nelle verifiche ed i risultati numerici. Norme di riferimento: NTC2008, Istruzione N°I/SC/PS-OM/2298, Ordinanza 3274 come modificato dall'OPCM 3431

"Offshore tower or platform foundations: numerical analysis of a laterally loaded single pile or pile group in soft clay and analysis of actions on a jacket structure"

Laterally loaded piles are a typical situation for a large number of cases in which deep foundations are used. Dissertation herein reported, is a focus upon the numerical simulation of laterally loaded piles. In the first chapter the best model settings are largely discussed, so a clear idea about the effects of interface adoption, model dimension, refinement cluster and mesh coarseness is reached. At a second stage, there are three distinct parametric analyses, in which the model response sensibility is studied for variation of interface reduction factor, Eps50 and tensile cut-off. In addition, the adoption of an advanced soil model is analysed (NGI-ADP). This was done in order to use the complex behaviour (different undrained shear strengths are involved) that governs the resisting process of clay under short time static loads. Once set a definitive model, a series of analyses has been carried out with the objective of defining the resistance-deflection (P-y) curves for Plaxis3D (2013) data. Major results of a large number of comparisons made with curves from API (America Petroleum Institute) recommendation are that the empirical curves have almost the same ultimate resistance but a bigger initial stiffness. In the second part of the thesis a simplified structural preliminary design of a jacket structure has been carried out to evaluate the environmental forces that act on it and on its piles foundation. Finally, pile lateral response is studied using the empirical curves.

Criteri di rinforzo di pile da ponte mediante isolatori progettati secondo DDBD

Valutazione di metori per la progettazione di isolatori da ponte mediante DDBD

Application of Submerged Grouted Anchors in Sheet Pile Quay Walls

Sheet pile walls are one of the oldest earth retention systems utilized in civil engineering projects. They are used for various purposes; such as excavation support system, cofferdams, cut-off walls under dams, slope stabilization, waterfront structures, and flood walls. Sheet pile walls are one of the most common types of quay walls used in port construction. The worldwide increases in utilization of large ships for transportation have created an urgent need of deepening the seabed within port areas and consequently the rehabilitation of its wharfs. Several methods can be used to increase the load-carrying capacity of sheet-piling walls. The use of additional anchored tie rods grouted into the backfill soil and arranged along the exposed wall height is one of the most practical and appropriate solutions adopted for stabilization and rehabilitation of the existing quay wall. The Ravenna Port Authority initiated a project to deepen the harbor bottom at selected wharves. An extensive parametric study through the finite element program, PLAXIS 2D, version 2012 was carried out to investigate the enhancement of using submerged grouted anchors technique on the load response of sheet-piling quay wall. The influence of grout-ties area, length of grouted body, anchor inclination and anchor location were considered and evaluated due to the effect of different system parameters. Also a comparative study was conducted by Plaxis 2D and 3D program to investigate the behavior of these sheet pile quay walls in terms of horizontal displacements induced along the sheet pile wall and ground surface settlements as well as the anchor force and calculated factor of safety. Finally, a comprehensive study was carried out by using different constitutive models to simulate the mechanical behavior of the soil to investigate the effect of these two models (Mohr-Coulomb and Hardening Soil) on the behavior of these sheet pile quay walls.

Comparison of three methods for driven pile capacity

A significant cost for foundations is the design and installation of piles when they are required due to poor ground conditions. Not only is it important that piles be designed properly, but also that the installation equipment and total cost be evaluated. To assist in the evaluation of piles a number of methods have been developed. In this research three of these methods were investigated, which were developed by the Federal Highway Administration, the US Corps of Engineers and the American Petroleum Institute (API). The results from these methods were entered into the program GRLWEAPTM to assess the pile drivability and to provide a standard base for comparing the three methods. An additional element of this research was to develop EXCEL spreadsheets to implement these three methods. Currently the Army Corps and API methods do not have publicly available software and must be performed manually, which requires that data is taken off of figures and tables, which can introduce error in the prediction of pile capacities. Following development of the EXCEL spreadsheet, they were validated with both manual calculations and existing data sets to ensure that the data output is correct. To evaluate the three pile capacity methods data was utilized from four project sites from North America. The data included site geotechnical data along with field determined pile capacities. In order to achieve a standard comparison of the data, the pile capacities and geotechnical data from the three methods were entered into GRLWEAPTM. The sites consisted of both cohesive and cohesionless soils; where one site was primarily cohesive, one was primarily cohesionless, and the other two consisted of inter-bedded cohesive and cohesionless soils. Based on this limited set of data the results indicated that the US Corps of Engineers method more closely compared with the field test data, followed by the API method to a lesser degree. The DRIVEN program compared favorably in cohesive soils, but over predicted in cohesionless material.

Pile-dwellings of the Neolithic and the Bronze Age in Switzerland. Long-term research and future tasks

Swiss lake-side settlements dating between 4300 and 800 BC were first recognized in the early 19th century and between 1854 and 1880 early research boomed due to the first scientific studies and the artificial lowering of lakes in Western Switzerland. In the 20th century underwater and wetland archaeology experienced an enormous surge not only because of large rescue excavations, due to extensive motorway construction projects but also due to the evolution of modern IT technology in the 1970s. For the first time huge quantities of ancient wooden structures could be dated by dendrochronology. This produced a quantum leap in the 150 years of pile-dwelling research. In 2011, the UNESCO World Heritage Committee recognized the outstanding universal value of these sites. This article presents an overview about Swiss pile-dwellings of the Neolithic and the Bronze Age and the results of two recent diploma works (case study Sutz-Lattrigen Haupstation innen and case study Seedorf Lobsigensee) as examples of research and cooperation between universities and government agencies for cultural heritage management.

UNESCO World Heritage „Prehistoric pile-dwellings around the Alps“: Chances and Challenges for Management and Research of Cultural Heritage Under Water

Research in prehistoric sites of lakes and bogs around the Alps started more than 150 years ago. In 2004 Switzerland took the initiative to propose an international UNESCO world heritage nomination, which was successful in 2011. Six countries – Austria, France, Germany, Italy, Slovenia and Switzerland – joined forces to obtain the precious label for an invisible cultural heritage of outstanding universal value. Archaeological sites under water or in bogs are of special importance because objects made of organic material like wood, bark, plant fibres and others survive in this milieu for hundred or thousands of years. The alpine pile-dwelling sites offer a highly precise dating possibility by using dendrochronology. All in all these sites have a high scientific potential but run also risks of long term conservation. Beside the scientific chances there are risks to consider: public access is difficult and a major challenge. New ideas are demanded to keep alive public interest.