Hop selection in peer-to-peer WPAN networks

Currently, wireless technology is revolutionizing the way we share information and communicate. The demands for mobility have made wireless technology the primary source for voice communication. Code-division multiple-access (CDMA) is a very popular spread spectrum application due to its claims of low transmission power, higher system capacity, ability to mitigate multipath fading and user interference. In that case, frequency-hopping code-division multiple access (FH-CDMA) has received considerable attention over the past few years. This technique will allow a better performance over a fading channel, message privacy, and immunity to narrowband interference. This paper addresses the characteristics of FH-CDMA in WPAN networks, with an emphasis on frequency-hopped Bluetooth systems. A performance evaluation of FH-CDMA is discussed and simulated. The analysis shows the interaction between the designed parameters and their effect on the network system. Most specifically, the FH-CDMA scheme provides frequency and temporal diversity to combat the effects of interference.

Exploring the transformative potential of Bluetooth beacons in higher education

The growing ubiquity of smartphones and tablet devices integrated into personal, social and professional life, facilitated by expansive communication networks globally, has the potential to disrupt higher education. Academics and students are considering the future possibilities of exploiting these tools and utilising networks to consolidate and expand knowledge, enhancing learning gain. Bluetooth beacon technology has been developed by both Apple and Google as a way to situate digital information within physical spaces, and this paper reflects on a beacon intervention in a contemporary art school in higher education conducted by the authors intended to develop a situated community of practice in Art & Design. The paper describes the project, including relevant theoretical foundations and background to the beacon technology, with regards to the potential of using these devices to create a connected learning community by enhancing learning and facilitating knowledge creation in a borderless learning space.

Design of a Multiband Full-Rate Ultra-Wideband Receiver in FPGA

MultiBand OFDM (MB-OFDM) UWB [1] is a short-range promising wireless technology for high data rate communications up to 480 Mbps. In this paper, we have designed and implemented in an Virtex-6 FPGA an MB-OFDM UWB receiver for the highest data rate of 480 Mbps. To test the system, we have also implemented an MB-OFDM transmitter and an AWGN generator in VHDL and determined the bit error rates at the receiver running in an FPGA.

Caracterização bidimensional de um canal rádio Wimax

Com o crescimento previsível e exponencial das redes de comunicações móveis motivado pela mobilidade, flexibilidade e também comodidade do utilizador levam a que este se torne na fatia mais importante do mundo das telecomunicações dos dias que correm. Assim é importante estudar e caracterizar canais rádio para as mais diversas gamas de frequências utilizadas nas mais variadas tecnologias. O objectivo principal desta dissertação de Mestrado é caracterizar um canal rádio para a tecnologia sem fios Worldwide Inter-operability for Microwave Access (Wimax para as frequências de 3,5 GHz e 5 GHz) actualmente vista pela comunidade científica como a tecnologia sem fios com maiores perspectivas de sucesso. Para tal, determinaram-se o Perfil de Atraso de Potência (PAP) e também a Potência em Função da Distância (PFD) recorrendo ao método computacional de simulação Finite-Difference Time-Domain (FDTD). De forma a estudar e caracterizar o canal rádio, em termos de desvanecimento relativo ao espalhamento de atraso, usaram-se dois métodos alternativos que têm como entrada o PAP. Para caracterizar o canal quanto ao desvanecimento baseado em espalhamento de Doppler, recorreu-se também a duas técnicas alternativas tendo como entrada o PFD. Em ambas as situações os dois métodos alternativos convergiram para os mesmos resultados. A caracterização é feita em dois cenários diferentes: um em que consideramos que a maioria dos obstáculos são condutores eléctricos perfeitos (CEP) e que passaremos a designar Cenário PEC, e um segundo cenário em que os obstáculos têm propriedades electromagnéticas diferentes, e que passará a ser designado por Cenário MIX. Em ambos os cenários de análise concluiu-se que o canal é plano, lento e sem ISI.

Inferência de percursos dos utentes de um transporte coletivo

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de Redes de Comunicações e Multimédia

Despliegue y análisis de la cobertura de una red WiMAX basada en IEEE 802.16-2004

Aquest projecte tracta de l’estudi de la cobertura WiMAX basada en la variant 802.16-2004 en la que opera a 3.5 GHz en diferents escenaris d’un campus universitari. Primerament es realitza una introducció general a WiMAX i es defineixen els equips utilitzats. Posteriorment es comença a dur a terme un estudi de la cobertura WiMAX en diferents escenaris: indoor y outdoor per tal de poder extreure models empírics simplificats de path loss a partir de mesures realitzades amb els terminals WiMAX. Per últim, s’introdueix al projecte InterRural del Ministeri d'Indústria, Turisme i Comerç dut a terme durant els mesos Octubre 2007 - Març 2008 amb altres empreses col·laboradores: Telefònica, Hispasat, Gigle i Iber-X. La finalitat del projecte InterRural és comparar diferents tecnologies wireless de banda ample com alternatives per un bucle local ràdio de la última milla. En concret es comparen experimentalment les tecnologies WiMAX i WiFI 802.11a en diferents escenaris: LOS i NLOS.

Realització d'una aplicació de gestió de xarxes per a la xarxa sensefils de Manresa GuifiBages

En els últims anys, la popularitat de les xarxes sensefils (WIFI) ha anat en augment a un ritme incansable. Des de petits aparells instal•lats a les cases amb aquesta tecnologia com a complement dels routers d’accés a internet instal•lats per diverses companyies, fins a empreses fent petits desplegaments per comunicar entre si les seves seus. Al marge d’aquests escenaris, s’ha produït un fenomen social d’acolliment d’aquesta tecnologia a nivell mundial, en forma del que coneixem com a xarxes ciutadanes / xarxes lliures / xarxes socials. Aquestes xarxes han estat possibles gràcies a diverses raons que han fet assequible a col•lectius de persones, tant els aparells com els coneixements necessaris per dur a terme aquestes actuacions. Dintre d’aquest marc, al Bages, concretament a Manresa, es va començar a desenvolupar una d’aquestes xarxes. Les decisions d’aquesta xarxa d’utilitzar exclusivament hardware i software de codi obert, i determinats aspectes tècnics de la xarxa, ha comportat que la xarxa fos incompatible amb algunes de les aplicacions de gestió de xarxes existents desenvolupades per comunicats com gufi.net a Osona. És per això que per garantir el creixement, la supervivència i l’èxit d’aquesta xarxa en el temps, és indispensable poder comptar amb una eina de gestió que s’adigui a les característiques de GuifiBages. L’objectiu principal d’aquest treball és dotar a la xarxa GuifiBages de les eines necessàries per poder gestionar tota la informació referent a l’estructura de la seva xarxa, tant per facilitar l’accés a nous usuaris sense molts coneixements tècnics, com per facilitar nous desplegaments / reparacions / modificacions de la xarxa d’una manera automàtica. Com a conclusió d’aquest treball, podem afirmar que les avantatges que proporciones tecnologies com Plone, faciliten enormement la creació d’aplicacions de gestió de continguts en entorn web. Alhora, l’ús de noves tècniques de programació com AJAX o recursos com els que ofereix Google, permeten desenvolupar aplicacions web que no tenen res a envejar al software tradicional. D’altra banda, voldríem destacar l’ús exclusiu de programari lliure tant en els paquets de software necessaris pel desenvolupament, com en el sistema operatiu i programes dels ordinadors on s’ha dut a terme, demostrant que es poden desenvolupar sistemes de qualitat sense dependre de programari privatiu.

Robust Detection of Incumbents in Cognitive Radio Networks Using Groups

Cognitive radio is a wireless technology aimed at improvingthe efficiency use of the radio-electric spectrum, thus facilitating a reductionin the load on the free frequency bands. Cognitive radio networkscan scan the spectrum and adapt their parameters to operate in the unoccupiedbands. To avoid interfering with licensed users operating on a givenchannel, the networks need to be highly sensitive, which is achieved byusing cooperative sensing methods. Current cooperative sensing methodsare not robust enough against occasional or continuous attacks. This articleoutlines a Group Fusion method that takes into account the behavior ofusers over the short and long term. On fusing the data, the method is basedon giving more weight to user groups that are more unanimous in their decisions.Simulations have been performed in a dynamic environment withinterferences. Results prove that when attackers are present (both reiterativeor sporadic), the proposed Group Fusion method has superior sensingcapability than other methods.

Detección Robusta por Grupos de Señales Primarias

La radio cognitiva es una tecnología inalámbrica propuesta para usar eficientemente los recursos del espectro radioeléctrico permitiendo así reducir la carga existente en las bandas de frecuencia de uso libre.Las redes de radio cognitiva son capaces de escanear el espectro y adaptar sus parámetros para operar en las bandas no ocupadas. Para evitar interferir con usuarios con licencia que operan en un determinado canal, la sensibilidad de las redes tiene que ser muy alta. Ello se consigue con métodos de detección cooperativos. Los métodos de detección cooperativa actuales tienen una carencia de robustez ya sea frente a ataques puntuales o continuos.En este artículo presentamos un método de fusión por grupos que tiene presente el comportamiento de los usuarios a corto y largo plazo. Al realizar la fusión de los datos, el método se basa en dar mayor peso a los grupos de usuarios con mayor unanimidad en sus decisiones.Los resultados de las simulaciones prueban que en presencia de atacantes el método de fusión por grupos propuesto consigue una detección superior a otros métodos, cumpliendo los requisitos de sensibilidad mínimos de las redes de radio cognitiva incluso con un 12 de usuarios reiteradamente maliciosos o un 10 de atacantes puntuales.

Crear dispositivo para personas sordas (plataforma hardware Arduino)

El trabajo expuesto en la presente memoria tiene como objetivo la creación de un prototipo de avisos para gente sorda. El sistema se encargará de facilitar la interactuación entre una persona con problemas auditivos y los señales sonoros que pueden hallarse en una casa. El prototipo se ha desarrollado a partir de la plataforma hardware Arduino, un Smartphone con sistema operativo Android y la tecnología de comunicaciones inalámbricas Bluetooth y ZigBee.

Regional Data Transmission Network

The globalization and development of an information society promptly change shape of the modern world. Cities and especially megacities including Saint-Petersburg are in the center of occuring changes. As a result of these changes the economic activities connected to reception and processing of the information now play very important role in economy of megacities what allows to characterize them as "information". Despite of wide experience in decision of information questions Russia, and in particular Saint-Petersburg, lag behind in development of information systems from the advanced European countries. The given master's thesis is devoted to development of an information system (data transmission network) on the basis of wireless technology in territory of Saint-Petersburg region within the framework of FTOP "Electronic Russia" and RTOP "Electronic Saint-Petersburg" programs. Logically the master's thesis can be divided into 3 parts: 1. The problems, purposes, expected results, terms and implementation of the "Electronic Russia" program. 2. Discussion about wireless data transmission networks (description of technology, substantiation of choice, description of signal's transmission techniques and types of network topology). 3. Fulfillment of the network (organization of central network node, regional centers, access lines, description of used equipment, network's capabilities), financial provision of the project, possible network management models.

Realització d'una aplicació de gestió de xarxes per a la xarxa sensefils de Manresa GuifiBages

En els últims anys, la popularitat de les xarxes sensefils (WIFI) ha anat en augment a un ritme incansable. Des de petits aparells instal•lats a les cases amb aquesta tecnologia com a complement dels routers d’accés a internet instal•lats per diverses companyies, fins a empreses fent petits desplegaments per comunicar entre si les seves seus. Al marge d’aquests escenaris, s’ha produït un fenomen social d’acolliment d’aquesta tecnologia a nivell mundial, en forma del que coneixem com a xarxes ciutadanes / xarxes lliures / xarxes socials. Aquestes xarxes han estat possibles gràcies a diverses raons que han fet assequible a col•lectius de persones, tant els aparells com els coneixements necessaris per dur a terme aquestes actuacions. Dintre d’aquest marc, al Bages, concretament a Manresa, es va començar a desenvolupar una d’aquestes xarxes. Les decisions d’aquesta xarxa d’utilitzar exclusivament hardware i software de codi obert, i determinats aspectes tècnics de la xarxa, ha comportat que la xarxa fos incompatible amb algunes de les aplicacions de gestió de xarxes existents desenvolupades per comunicats com gufi.net a Osona. És per això que per garantir el creixement, la supervivència i l’èxit d’aquesta xarxa en el temps, és indispensable poder comptar amb una eina de gestió que s’adigui a les característiques de GuifiBages. L’objectiu principal d’aquest treball és dotar a la xarxa GuifiBages de les eines necessàries per poder gestionar tota la informació referent a l’estructura de la seva xarxa, tant per facilitar l’accés a nous usuaris sense molts coneixements tècnics, com per facilitar nous desplegaments / reparacions / modificacions de la xarxa d’una manera automàtica. Com a conclusió d’aquest treball, podem afirmar que les avantatges que proporciones tecnologies com Plone, faciliten enormement la creació d’aplicacions de gestió de continguts en entorn web. Alhora, l’ús de noves tècniques de programació com AJAX o recursos com els que ofereix Google, permeten desenvolupar aplicacions web que no tenen res a envejar al software tradicional. D’altra banda, voldríem destacar l’ús exclusiu de programari lliure tant en els paquets de software necessaris pel desenvolupament, com en el sistema operatiu i programes dels ordinadors on s’ha dut a terme, demostrant que es poden desenvolupar sistemes de qualitat sense dependre de programari privatiu.

Investigations on broadband planar monopole and slot radiators and their suitability for UWB applications

In recent years, there is a visible trend for products/services which demand seamless integration of cellular networks, WLANs and WPANs. This is a strong indication for the inclusion of high speed short range wireless technology in future applications. In this context UWB radio has a significant role to play as an extension/complement to existing cellular/access technology. In the present work, we have investigated two major types of wide band planar antennas: Monopole and Slot. Four novel compact broadband antennas, suitable for poratble applications, are designed and characterized, namely 1. Elliptical monopole 2. Inverted cone monopole 3. Koch fractal slot 4. Wide band slot The performance of these designs have been studied using standard simulation tools used in industry/academia and they have been experimentally verified. Antenna design guidelines are also deduced by accounting the resonances in each structure. In addition to having compact sized, high efficiency and broad bandwidth antennas, one of the major criterion in the design of impulse-UWB systems have been the transmission of narrow band pulses with minimum distortion. The key challenge is not only to design a broad band antenna with constant and stable gain but to maintain a flat group delay or linear phase response in the frequency domain or excellent transient response in time domain. One of the major contributions of the thesis lies in the analysis of the frequency and time-domain response of the designed UWB antennas to confirm their suitability for portable pulsed-UWB systems. Techniques to avoid narrowband interference by engraving narrow slot resonators on the antenna is also proposed and their effect on a nano-second pulse have been investigated.

Development of Free Space Method for Material Characterisation and GPR Study & A Case Study on Biological Samples

The thesis mainly focuses on material characterization in different environments: freely available samples taken in planar fonn, biological samples available in small quantities and buried objects.Free space method, finds many applications in the fields of industry, medicine and communication. As it is a non-contact method, it can be employed for monitoring the electrical properties of materials moving through a conveyor belt in real time. Also, measurement on such systems at high temperature is possible. NID theory can be applied to the characterization of thin films. Dielectric properties of thin films deposited on any dielectric substrate can be determined. ln chemical industry, the stages of a chemical reaction can be monitored online. Online monitoring will be more efficient as it saves time and avoids risk of sample collection.Dielectric contrast is one of the main factors, which decides the detectability of a system. lt could be noted that the two dielectric objects of same dielectric constant 3.2 (s, of plastic mine) placed in a medium of dielectric constant 2.56 (er of sand) could even be detected employing the time domain analysis of the reflected signal. This type of detection finds strategic importance as it provides solution to the problem of clearance of non-metallic mines. The demining of these mines using the conventional techniques had been proved futile. The studies on the detection of voids and leakage in pipes find many applications.The determined electrical properties of tissues can be used for numerical modeling of cells, microwave imaging, SAR test etc. All these techniques need the accurate determination of dielectric constant. ln the modem world, the use of cellular and other wireless communication systems is booming up. At the same time people are concemed about the hazardous effects of microwaves on living cells. The effect is usually studied on human phantom models. The construction of the models requires the knowledge of the dielectric parameters of the various body tissues. lt is in this context that the present study gains significance. The case study on biological samples shows that the properties of normal and infected body tissues are different. Even though the change in the dielectric properties of infected samples from that of normal one may not be a clear evidence of an ailment, it is an indication of some disorder.ln medical field, the free space method may be adapted for imaging the biological samples. This method can also be used in wireless technology. Evaluation of electrical properties and attenuation of obstacles in the path of RF waves can be done using free waves. An intelligent system for controlling the power output or frequency depending on the feed back values of the attenuation may be developed.The simulation employed in GPR can be extended for the exploration of the effects due to the factors such as the different proportion of water content in the soil, the level and roughness of the soil etc on the reflected signal. This may find applications in geological explorations. ln the detection of mines, a state-of-the art technique for scanning and imaging an active mine field can be developed using GPR. The probing antenna can be attached to a robotic arm capable of three degrees of rotation and the whole detecting system can be housed in a military vehicle. In industry, a system based on the GPR principle can be developed for monitoring liquid or gas through a pipe, as pipe with and without the sample gives different reflection responses. lt may also be implemented for the online monitoring of different stages of extraction and purification of crude petroleum in a plant.Since biological samples show fluctuation in the dielectric nature with time and other physiological conditions, more investigation in this direction should be done. The infected cells at various stages of advancement and the normal cells should be analysed. The results from these comparative studies can be utilized for the detection of the onset of such diseases. Studying the properties of infected tissues at different stages, the threshold of detectability of infected cells can be determined.

Design and development of compact printed ultra wide band antennas

In recent years, there is a visible trend for products/services which demand seamless integration of cellular networks, WLANs and WPANs. This is a strong indication for the inclusion of high speed short range wireless technology in future applications. In this context UWB radio has a significant role to play as an extension/complement to existing cellular/access technology. In the present work, three major types of ultra wide band planar antennas are investigated: Monopole and Slot. Three novel compact UWB antennas, suitable for poratble applications, are designed and characterized, namely 1) Ground modified monopole 2) Serrated monopole 3) Triangular slot The performance of these designs have been studied using standard simulation tools used in industry/academia and they have been experimentally verified. Antenna design guidelines are also deduced by accounting the resonances in each structure. In addition to having compact sized, high efficiency and broad bandwidth antennas, one of the major criterion in the design of impulse-UWB systems have been the transmission of narrow band pulses with minimum distortion. The key challenge is not only to design a broad band antenna with constant and stable gain but to maintain a flat group delay or linear phase response in the frequency domain or excellent transient response in time domain. One of the major contributions of the thesis lies in the analysis of the frequency and timedomain response of the designed UWB antennas to confirm their suitability for portable pulsed-UWB systems. Techniques to avoid narrowband interference by engraving narrow slot resonators on the antenna is also proposed and their effect on a nano-second pulse have been investigated