Mineralogy and Magnetic Properties of Basaltic Substrate Soils: Kaho'olawe and Big Island, Hawaii

Magnetic behavior of soils can seriously hamper the performance of geophysical sensors. Currently, we have little understanding of the types of minerals responsible for the magnetic behavior, as well as their distribution in space and evolution through time. This study investigated the magnetic characteristics and mineralogy of Fe-rich soils developed on basaltic substrate in Hawaii. We measured the spatial distribution of magnetic susceptibility (χlf) and frequency dependence (χfd%) across three test areas in a well-developed eroded soil on Kaho'olawe and in two young soils on the Big Island of Hawaii. X-ray diffraction spectroscopy, x-ray fluorescence spectroscopy (XFCF), chemical dissolution, thermal analysis, and temperature-dependent magnetic studies were used to characterize soil development and mineralogy for samples from soil pits on Kaho'olawe, surface samples from all three test areas, and unweathered basalt from the Big Island of Hawaii. The measurements show a general increase in magnetic properties with increasing soil development. The XRF Fe data ranged from 13% for fresh basalt and young soils on the Big Island to 58% for material from the B horizon of Kaho'olawe soils. Dithionite-extractable and oxalate-extractable Fe percentages increase with soil development and correlate with χlf-and χfd%, respectively. Results from the temperature-dependent susceptibility measurements show that the high soil magnetic properties observed in geophysical surveys in Kaho'olawe are entirely due to neoformed minerals. The results of our studies have implications for the existing soil survey of Kaho'olawe and help identify methods to characterize magnetic minerals in tropical soils.

The doomsday vault: Seed banks, food security, and climate change

"It could easily provide the back-drop for a James Bond movie. Deep inside a mountain near the North Pole, down a fortified tunnel, and behind airlocked doors in a vault frozen to -18 degrees Celsius, scientists are squirreling away millions of seed samples. The samples constitute the very foundation of agriculture, the biological diversity needed so the world's major food crops can adapt to the next pest or disease, or to climate change. It's little wonder that the Svalbard Global Seed Vault has captured the public's imagination more than almost any agricultural topic in recent years. Popular press reports about the ‘Doomsday Vault,’ however, typically mask the complexity of the endeavor and, if anything, underestimate its practical utility." Cary Fowler This chapter considers the use of seed banks to address concerns about intellectual property, climate change and food security. It has a number of themes. First of all, it is interested in the use of ‘Big Science’ projects to address pressing global scientific concerns and Millennium Development Goals. Second, it highlights the increasing use of banks as a means of managing both property and intellectual property across a wide range of fields of agriculture and biotechnology. Third, it considers the linkage of intellectual property, access to genetic resources and benefit sharing. There are a variety of positions in this debate. Some see requirements in respect of access to genetic resources and benefit sharing as an inconvenient burden for science and commerce. Others defend access to genetic resources and benefit sharing as meaningful and productive. Those inclined to somewhat more conspiratorial views suggest that access to genetic resources and benefit sharing are a ruse to facilitate biopiracy. This chapter has a number of components. Section I focuses upon the Consultative Group on International Agricultural Research (CGIAR) network – often raised as a model for Climate Innovation Centres. Section II considers the Svalbard Global Seed Vault – the so-called Doomsday Vault. After a consideration of the World Summit on Food Security in 2009, it is concluded in this chapter that any future international agreement on climate change needs to address intellectual property, plant genetic resources and food security.

Simple sequence repeat markers associated with three quantitative trait loci for black point resistance can be used to enrich selection populations in bread wheat

Black point in wheat has the potential to cost the Australian industry $A30.4 million a year. It is difficult and expensive to screen for resistance, so the aim of this study was to validate 3 previously identified quantitative trait loci (QTLs) for black point resistance on chromosomes 2B, 4A, and 3D of the wheat variety Sunco. Black point resistance data and simple sequence repeat (SSR) markers, linked to the resistance QTLs and suited to high-throughput assay, were analysed in the doubled haploid population, Batavia (susceptible) × Pelsart (resistant). Sunco and Pelsart both have Cook in their pedigree and both have the Triticum timopheevii translocation on 2B. SSR markers identified for the 3 genetic regions were gwm319 (2B, T. timopheevii translocation), wmc048 (4AS), and gwm341 (3DS). Gwm319 and wmc048 were associated with black point resistance in the validation population. Gwm341 may have an epistatic influence on the trait because when resistance alleles were present at both gwm319 and wmc048, the Batavia-derived allele at gwm341 was associated with a higher proportion of resistant lines. Data are presented showing the level of enrichment achieved for black point resistance, using 1, 2, or 3 of these molecular markers, and the number of associated discarded resistant lines. The level of population enrichment was found to be 1.83-fold with 6 of 17 resistant lines discarded when gwm319 and wmc048 were both used for selection. Interactions among the 3 QTLs appear complex and other genetic and epigenetic factors influence susceptibility to black point. Polymorphism was assessed for these markers within potential breeding material. This indicated that alternative markers to wmc048 may be required for some parental combinations. Based on these results, marker-assisted selection for the major black point resistance QTLs can increase the rate of genetic gain by improving the selection efficiency and may facilitate stacking of black point resistances from different sources.

Shifting centres: Pedagogical relations in the Era of Big Data

This paper presents a cautious argument for re-thinking both the nature and the centrality of the one-to-one teacher/student relationship in contemporary pedagogy. A case is made that learning in and for our times requires us to broaden our understanding of pedagogical relations beyond the singularity of the teacher/student binary and to promote the connected teacher as better placed to lead learning for these times. The argument proceeds in three parts: first, a characterization of our times as defined increasingly by the digital knowledge explosion of Big Data; second, a re-thinking of the nature of pedagogical relationships in the context of Big Data; and third, an account of the ways in which leaders can support their teachers to become more effective in leading learning by being more closely connected to their professional colleagues.

Higher spin resolution of a toy big bang

Diffeomorphisms preserve spacetime singularities, whereas higher spin symmetries need not. Since three-dimensional de Sitter space has quotients that have big-bang/big-crunch singularities and since dS(3)-gravity can be written as an SL(2, C) Chern-Simons theory, we investigate SL(3, C) Chern-Simons theory as a higher-spin context in which these singularities might get resolved. As in the case of higher spin black holes in AdS(3), the solutions are invariantly characterized by their holonomies. We show that the dS(3) quotient singularity can be desingularized by an SL(3, C) gauge transformation that preserves the holonomy: this is a higher spin resolution the cosmological singularity. Our work deals exclusively with the bulk theory, and is independent of the subtleties involved in defining a CFT2 dual to dS(3) in the sense of dS/CFT.

Three-dimensional numerical analysis of geocell-reinforced soft clay beds by considering the actual geometry of geocell pockets

Due to its complex honeycomb structure, the numerical modeling of the geocell has always been a big challenge. Generally, the equivalent composite approach is used to model the geocells. In the equivalent composite approach, the geocellsoil composite is treated as the soil layer with improved strength and stiffness values. Though this approach is very simple, it is unrealistic to model the geocells as the soil layer. This paper presents a more realistic approach of modeling the geocells in three-dimensional (3D) framework by considering the actual curvature of the geocell pocket. A square footing resting on geocell reinforced soft clay bed was modeled using the ``fast Lagrangian analysis of continua in 3D'' (FLAC(3D)) finite difference package. Three different material models, namely modified Cam-clay, Mohr-Coulomb, and linear elastic were used to simulate the behaviour of foundation soil, infill soil and the geocell, respectively. It was found that the geocells distribute the load laterally to the wider area below the footing as compared to the unreinforced case. More than 50% reduction in the stress was observed in the clay bed in the presence of geocells. In addition to geocells, two other cases, namely, only geogrid and geocell with additional basal geogrid cases were also simulated. The numerical model was systematically validated with the results of the physical model tests. Using the validated numerical model, parametric studies were conducted to evaluate the influence of various geocell properties on the performance of reinforced clay beds.

Panama City Fisheries Resources Office: FY 2005 Annual Report

HIGHLIGHTS FOR FY 2005 1. Assisted with a study to assess hurricane impacts to Gulf sturgeon critical foraging habitat. 2. Documented Gulf sturgeon marine movement and habitat use in the Gulf of Mexico. 3. Documented Gulf sturgeon spawning with the collection of fertilized eggs in the Apalachicola River, Florida. 4. Documented Gulf sturgeon spawning with the collection of fertilized eggs in the Yellow River, Florida. 5. Assisted with benthic invertebrate survey at Gulf sturgeon marine foraging grounds. 6. Implemented Gulf Striped Bass Restoration Plan by coordinating the 22nd Annual Morone Workshop, leading the technical committee, transporting broodfish, and coordinating the stocking on the Apalachicola-Chattahoochee-Flint (ACF) river system. 7. Over 87,000 Phase II Gulf striped bass were marked with sequential coded wire tags and stocked in the Apalachicola River. Post-stocking evaluations were conducted at 45 sites in the fall and spring and 8 thermal refuges in the summer. 8. Completed fishery surveys on 4 ponds on Eglin AFB totaling 53 acres, and completed a report with recommendations for future recreational fishery needs. 9. Completed final report for aquatic monitoring at Eglin AFB from 1999 to 2004. 10. Completed a field collection of the endangered Okaloosa darter to be incorporated into a status review to be completed in FY06. 11. Provided technical assistance to the Region 4 National Wildlife Refuge (NWR) program on changes to the fishery conservation targets for the region. Also provided technical assistance to four NWRs (i.e., Okefenokee NWR, Banks Lake NWR, St. Vincent NWR, and St. Marks NWR) relative to hurricanes and recreational fishing. 12. A draft mussel sampling protocol was tested in wadeable streams in Northwest Florida and southwest Georgia, and an associated field guide, poster, and Freshwater Mussel Survey Protocol and Identification workshop were completed in FY05. 13. Implemented recovery plan and candidate conservation actions for 14 listed and candidate freshwater mussels in the Northeast Gulf Watersheds. 14. Initiated or completed multiple stream restoration and watershed management projects. A total of 7.5 stream miles were restored for stream fishes, and 11 miles of coastline were enhanced for sea turtle lighting. A total of 630 acres of wetlands and 2,401 acres of understory habitat were restored. 15. Conducted a watershed assessment to develop a threats analysis for prioritizing restoration, protection, and enhancement to natural resources of Spring Creek, Georgia and Canoe Creek, Florida. 16. Continued the formation of an Unpaved Road Interagency Team of Federal, State, and local agencies in Northwest Florida to promote stream protection and restoration from unpaved road sediment runoff. Began the development of a technical committee agreement. 17. Conducted Alabama Unpaved Road Inventory within the Northeast Gulf Ecosystem. Data collection will be completed during FY06. 18. Finalized the development of two North Florida hydrophysiographic regional curves for use by the Florida Department of Transportation (DOT) and others involved with stream restoration and protection. Initiated the development of the Alabama Coastal Plain Riparian Reference Reach and Regional Curves for use by the Alabama Department of Environmental Management (ADEM). 19. Provided technical assistance in collecting data, analysis, and thesis formulation with Troy University, Alabama, to identify the influence of large woody debris in southeastern coastal plain streams. 20. Completed pre- and post-restoration fish community monitoring at several restoration projects including Big Escambia Creek, Magnolia Creek, and Oyster Lake, Florida. 21. Established a watershed partnership for the Chipola River in Alabama and Florida and expanded development and participation in the Spring Creek Watershed Partnership, Georgia. 22. Continued to identify barriers which inhibit the movement of aquatic species within the Northeast Gulf Ecoregion. 23. Completed a report on road crossing structures in Okaloosa darter streams to guide the closure/repair/maintenance of roads to contribute to recovery of the endangered species. In cooperation with Three Rivers RC&D Council, fish passage sites identified in the report were prioritized for restoration. 24. Monitored Aquatic Nuisance Species in the Apalachicola River and tested the sterility of exotic grass carp. 25. Multiple outreach projects were completed to detail aquatic resources conservation needs and opportunities. Participated in National Fishing Week event, several festivals, and school outreach.

Cheshire stillwaters. Summary results of 1997 data Oak Mere, Betley Mere and Marbury Big

This is the Cheshire stillwaters. Summary results of 1997 data Oak Mere, Betley Mere and Marbury Big from the National Rivers Authority, June 1998. In May 1997, a Stillwaters meeting was held to discuss the way forward in stillwaters monitoring. It decided upon the establishment of a three year rolling programme, in which three stillwaters would be monitored three times a year, every third year. The stillwaters where chosen due to water quality (i.e potential polluted / sensitive waters), fisheries and ecological interests. The Still waters chosen for the first year (1997) were Oak Mere, Betley Mere and Marbury Big Mere. The surveys were aimed to produce a comprehensive study of the still water through monitoring a variety of parameters. Algal, zooplankton and water chemical samples were taken three times a year, (April, July and September). In addition, fisheries surveys were taken in July and marginal invertebrate surveys taken in September.

Determination of PAH, PCB, and OCP in water from the Three Gorges Reservoir accumulated by semipermeable membrane devices (SPMD)

Bioavailable water concentrations of polycyclic aromatic hydrocarbons (PAH), polychlorinated biphenyls (PCB) and organochlorine pesticides (OCP) were measured in the water column from Three Gorges Reservoir (TGR) collected in May 2008 using semipermeable membrane devices (SPMDs). The sampling sites spanned the whole reservoir from the upstream Chongqing to the great dam covering more than 600 km long distance with water flow velocities ranging from <0.05 to 1.5 m s(-1). This is the first experience of SPMD application in the biggest reservoir in the world. The results of water sampling rates based on performance reference compounds (PRC) were tested to be significantly correlated with water flow velocities in the big river. Results of back-calculated aqueous concentrations based on PRC showed obvious regional variations of PAH, PCB and OCP levels in the reservoir. Total PAH ranged from 13.8 to 97.2 ng L-1, with the higher concentrations occurring in the region of upstream and near the dam. Phenanthrene, fluoranthene, pyrene and chrysene were the predominant PAH compounds in TGR water. Total PCB ranged from 0.08 to 0.51 ng L-1, with the highest one occurring in the region near the dam. PCB 28, 52, 101, 138, 153, 180, 118 were the most abundant PCB congeners in the water. The total OCP ranged from 2.33 to 3.60 ng L-1 and the levels showed homogenous distribution in the whole reservoir. HCH, DDT and HCB, PeCB were the major compounds of OCP fingerprints. Based on water quality criteria, the TGR water could be designated as being polluted by HCB and PAH. Data on PAH, PCB and OCP concentrations found in this survey can be used as reference levels for future POP monitoring programmes in TGR. (C) 2009 Elsevier Ltd. All rights reserved.

Molecular phylogeny of three subspecies of common carp Cyprinus carpio, based on sequence analysis of cytochrome b and control region of mtDNA

The complete cytochrome b and the control region of mtDNA (about 2070 bp in total) of 10 strains belonging to three subspecies of the common carp, including three wild subspecies (the Yangtze River wild common carp - Cyprinus carpio haematopterus, Yuanjiang River wild common carp Cyprinus carpio rubrofuscus and Volga River wild common carp - Cyprinus carpio carpio) and seven domestic strains (Xingguo red carp, Russian scattered scaled mirror carp, Qingtian carp, Japanese Koi carp, purse red carp, Big-belly carp, German mirror carp) were sequenced. Phylogenetic analysis indicated that the 10 strains form three distinct clades, corresponding to C. c. haematopterus, C. c. rubrofuscus and C. c. carpio respectively. Purse red carp, an endemic domestic strain in Jiangxi province of China, showed a higher evolution rate in comparison with the other strains of C. c. haematopterus, most probably because of intensive selection and a long history of domestication. Base variation ratios among the three subspecies varied from 0.78% (between C. c. haematopterus and C. c. rubrofuscus) to 1.47%(between C. c. carpio and C. c. rubrofuscus). The topography of the phylogenetic tree and the geographic distribution of three subspecies closely resemble each other. The divergence time between C. c. carpio and the other two subspecies was estimated to be about 0.9 Myr and about 0.5 Myr between C. c. haematopterus and C. c. rubrofuscus. Based on phylogenetic analysis, C. c. rubrofuscus might have diverged from C. c. haematopterus.

On "fitting in": the effects of social context and gender on big 5 trait expression.

[This is a summary of an Oral Presentation] The study explored the expression of Big 5 personality traits in three different social contexts (with parents friends and work colleagues) to test the prediction that personality is socially variable due to the motivation to ‘fit in’. The questionnaire-based method produced results that support this hypothesis; all Big 5 traits were significantly variable across contexts with Conscientiousness the least variable and Extraversion possessiveness. The results indicated that females reported being more distressed than males and older respondents reported being less distressed then younger respondents. The findings from this study contribute to the literature on online infidelity in terms of understanding differences in the way it is perceived.

Integrating situational and dispositional determinants of job satisfaction: Findings from three samples of professionals

Job satisfaction can be conceptualized as a function of situational conditions, personal characteristics, and interactions between both groups of variables. The authors compared the relative predictive power of these determinants in 3 samples of professionals (total N = 1,065). Perceived job characteristics (qualification possibilities, social support, stress, autonomy, participatory leadership) uniquely explained 7-22% of the variance in job satisfaction, and dispositional factors (Big Five, occupational self-efficacy, work centrality, mastery goals) uniquely explained 8-12% of the variance. Dispositional influences were partially mediated by perceived job characteristics. Interactions between situational and dispositional factors were of little significance. The authors concluded that perceived job characteristics (especially autonomy and participatory leadership) are important determinants of job satisfaction, and neuroticism is an important determinant as well. Highly educated professionals job satisfaction also seems to be driven by qualification possibilities.

Three-Dimensional Analysis of Seepage below and around Hydraulic Structures

This paper investigates the problem of seepage under the floor of hydraulic structures considering the compartment of flow that seeps through the surrounding banks of the canal. A computer program, utilizing a finite-element method and capable of handling three-dimensional (3D) saturated–unsaturated flow problems, was used. Different ratios of canal width/differential head applied on the structure were studied. The results produced from the two-dimensional (2D) analysis were observed to deviate largely from that obtained from 3D analysis of the same problem, despite the fact that the porous medium was isotropic and homogeneous. For example, the exit gradient obtained from 3D analysis was as high as 2.5 times its value obtained from 2D analysis. Uplift force acting upwards on the structure has also increased by about 46% compared with its value obtained from the 2D solution. When the canal width/ differential head ratio was 10 or higher, the 3D results were comparable to the 2D results. It is recommended to construct a core of low permeability soil in the banks of canal to reduce the seepage losses, uplift force, and exit gradient.

Design of hydraulic structures considering different sheetpile configurations and flow through canal banks

This research investigated seepage under hydraulic structures considering flow through the banks of the canal. A computer model, utilizing the finite element method, was used. Different configurations of sheetpile driven under the floor of the structure were studied. Results showed that the transverse extension of sheetpile, driven at the middle of the floor, into the banks of the canal had very little effect on seepage losses, uplift force, and on the exit gradient at the downstream end of the floor. Likewise, confining the downstream floor with sheetpile from three sides was not found effective. When the downstream floor was confined with sheetpile from all sides, this has significantly reduced the exit gradient. Furthermore, all the different configurations of the sheetpile had insignificant effect on seepage losses. The most effective configuration of the sheetpile was the case when two rows of sheetpiles were driven at the middle and at the downstream end of the floor, with the latter sheetpile extended few meters into the banks of the canal. This case has significantly reduced the exit gradient and caused only slight increase in the uplift force when compared to other sheetpile configurations. The present study suggests that two-dimensional analysis of seepage problems underestimates the exit gradient and uplift force on hydraulic structures.