Optimization of Processing Technology for Commercial Drying of Bananas (Matooke)

Summary - Cooking banana is one of the most important crops in Uganda; it is a staple food and source of household income in rural areas. The most common cooking banana is locally called matooke, a Musa sp triploid acuminate genome group (AAA-EAHB). It is perishable and traded in fresh form leading to very high postharvest losses (22-45%). This is attributed to: non-uniform level of harvest maturity, poor handling, bulk transportation and lack of value addition/processing technologies, which are currently the main challenges for trade and export, and diversified utilization of matooke. Drying is one of the oldest technologies employed in processing of agricultural produce. A lot of research has been carried out on drying of fruits and vegetables, but little information is available on matooke. Drying of matooke and milling it to flour extends its shelf-life is an important means to overcome the above challenges. Raw matooke flour is a generic flour developed to improve shelf stability of the fruit and to find alternative uses. It is rich in starch (80 - 85%db) and subsequently has a high potential as a calorie resource base. It possesses good properties for both food and non-food industrial use. Some effort has been done to commercialize the processing of matooke but there is still limited information on its processing into flour. It was imperative to carry out an in-depth study to bridge the following gaps: lack of accurate information on the maturity window within which matooke for processing into flour can be harvested leading to non-uniform quality of matooke flour; there is no information on moisture sorption isotherm for matooke from which the minimum equilibrium moisture content in relation to temperature and relative humidity is obtainable, below which the dry matooke would be microbiologically shelf-stable; and lack of information on drying behavior of matooke and standardized processing parameters for matooke in relation to physicochemical properties of the flour. The main objective of the study was to establish the optimum harvest maturity window and optimize the processing parameters for obtaining standardized microbiologically shelf-stable matooke flour with good starch quality attributes. This research was designed to: i) establish the optimum maturity harvest window within which matooke can be harvested to produce a consistent quality of matooke flour, ii) establish the sorption isotherms for matooke, iii) establish the effect of process parameters on drying characteristics of matooke, iv) optimize the drying process parameters for matooke, v) validate the models of maturity and optimum process parameters and vi) standardize process parameters for commercial processing of matooke. Samples were obtained from a banana plantation at Presidential Initiative on Banana Industrial Development (PIBID), Technology Business Incubation Center (TBI) at Nyaruzunga – Bushenyi in Western Uganda. A completely randomized design (CRD) was employed in selecting the banana stools from which samples for the experiments were picked. The cultivar Mbwazirume which is soft cooking and commonly grown in Bushenyi was selected for the study. The static gravitation method recommended by COST 90 Project (Wolf et al., 1985), was used for determination of moisture sorption isotherms. A research dryer developed for this research. All experiments were carried out in laboratories at TBI. The physiological maturity of matooke cv. mbwazirume at Bushenyi is 21 weeks. The optimum harvest maturity window for commercial processing of matooke flour (Raw Tooke Flour - RTF) at Bushenyi is between 15-21 weeks. The finger weight model is recommended for farmers to estimate harvest maturity for matooke and the combined model of finger weight and pulp peel ratio is recommended for commercial processors. Matooke isotherms exhibited type II curve behavior which is characteristic of foodstuffs. The GAB model best described all the adsorption and desorption moisture isotherms. For commercial processing of matooke, in order to obtain a microbiologically shelf-stable dry product. It is recommended to dry it to moisture content below or equal to 10% (wb). The hysteresis phenomenon was exhibited by the moisture sorption isotherms for matooke. The isoteric heat of sorption for both adsorptions and desorption isotherms increased with decreased moisture content. The total isosteric heat of sorption for matooke: adsorption isotherm ranged from 4,586 – 2,386 kJ/kg and desorption isotherm from 18,194– 2,391 kJ/kg for equilibrium moisture content from 0.3 – 0.01 (db) respectively. The minimum energy required for drying matooke from 80 – 10% (wb) is 8,124 kJ/kg of water removed. Implying that the minimum energy required for drying of 1 kg of fresh matooke from 80 - 10% (wb) is 5,793 kJ. The drying of matooke takes place in three steps: the warm-up and the two falling rate periods. The drying rate constant for all processing parameters ranged from 5,793 kJ and effective diffusivity ranged from 1.5E-10 - 8.27E-10 m2/s. The activation energy (Ea) for matooke was 16.3kJ/mol (1,605 kJ/kg). Comparing the activation energy (Ea) with the net isosteric heat of sorption for desorption isotherm (qst) (1,297.62) at 0.1 (kg water/kg dry matter), indicated that Ea was higher than qst suggesting that moisture molecules travel in liquid form in matooke slices. The total color difference (ΔE*) between the fresh and dry samples, was lowest for effect of thickness of 7 mm, followed by air velocity of 6 m/s, and then drying air temperature at 70˚C. The drying system controlled by set surface product temperature, reduced the drying time by 50% compared to that of a drying system controlled by set air drying temperature. The processing parameters did not have a significant effect on physicochemical and quality attributes, suggesting that any drying air temperature can be used in the initial stages of drying as long as the product temperature does not exceed gelatinization temperature of matooke (72˚C). The optimum processing parameters for single-layer drying of matooke are: thickness = 3 mm, air temperatures 70˚C, dew point temperature 18˚C and air velocity 6 m/s overflow mode. From practical point of view it is recommended that for commercial processing of matooke, to employ multi-layer drying of loading capacity equal or less than 7 kg/m², thickness 3 mm, air temperatures 70˚C, dew point temperature 18˚C and air velocity 6 m/s overflow mode.

Genotypic differences in the growth of bananas (Musa spp.) infected with migratory endoparasitic nematodes. 1. Roots

The effects of nematodes on root morphology and the association of root characteristics with resistance to nematodes of seven banana varieties were investigated in two experiments. Banana plants were grown in controlled conditions within polytunnels and harvested on three occasions for the measurement of root morpholopy, and biomass. Varieties differed in their resistance to nematodes, from resistant (Yg Km5, FHIA 17, FHIA 03) and partly resistant (FHIA 01, FHIA 25) to not resistant ((FHIA 23, Williams). Nematodes reduced the root dry weight of FHIA 01, FHIA 17 and FHIA 23 at some harvests. Primary root number was on average 9.5% lower in nematode-infected plants than controls, with no differences among the varieties. Thus, there was no simple association between the resistance of these varieties and their tolerance to nematodes. Varieties differed in root morphology. Root dry weight was greatest for resistant varieties Yg Km5 and FHIA 03, and least for non-resistant varieties FHIA 23 and Williams. Thus, resistance to nematodes was associated with varieties with greater root mass and more and larger primary roots.

Genotypic differences in the growth of bananas (Musa spp.) infected with migratory endoparasitic nematodes. 2. Shoots

In order to identify the effect of burrowing nematodes on the shoots (pseudostem and leaves) of banana plants and to determine whether or not shoot characteristics are associated with plant resistance to nematodes two experiments were conducted in controlled conditions within polytunnels. The banana plants were harvested on three occasions for the measurement of root morphology and biomass. Varieties differed in their resistance to nematodes from resistant (Yg Km5, FHIA 17, FHIA 03) and partly resistant (FHIA 01, FHIA 25) to not resistant (FHIA 23, Williams). Nematodes reduced total plant dry weight at the first harvest in Experiment 1 and by an average of 8.8% in Experiment 2, but did not affect leaf area in either experiment. The ratio of above-ground Weight to total plant weight was reduced from 75% to 72% in nematode-infected plants compared with the control plants for all varieties tested in Experiment 1, but was only reduced in FHIA 25 and FHIA 23 in Experiment 2. Varieties differed in above-ground growth. The FHIA varieties had greater shoot weights and leaf area than YgKm5 and Williams. Overall, resistance to nematodes was associated with the partitioning of a greater proportion of biomass to the roots than to above-ground parts.

Nuclear magnetic resonance water relaxation time changes in bananas during ripening: a new mechanism

BACKGROUND: Nuclear magnetic resonance studies of banana fragments during ripening show an increase on the water transverse relaxation time (T(2)) and a decrease in water self-diffusion coefficient (D). As T(2) and D are normally directly correlated, we studied these two properties in intact bananas during ripening, in an attempt to rule out the effect of injury on the apparent discrepancies in the behavior of T(2) and D. RESULTS: The results show that injury in bananas causes a decrease in T(2) of the water in vacuoles (T(2vac)). They also show that T(2vac) increased and D decreased during ripening, ruling out the injury effect. To explain the apparent discrepancies, we propose a new hypothesis for the increase in T(2) values, based on the reduction of Fe(3+) ions to Fe(2+) by galacturonic acid, produced by the hydrolysis of pectin and a decrease in internal oxygen concentration during ripening. CONCLUSION: As injury alters T(2) values it is necessary to use intact bananas to study relaxation times during ripening. The novel interpretation for the increase in T(2vac) based on reduction of Fe(+3) and O(2) concentration is an alternative mechanism to that based on the hydrolysis of starch in amyloplasts. (C) 2010 Society of Chemical Industry

Agronomic characteristics of 'Prata-anã' and 'Maçã' bananas micropropagated

O experimento foi instalado com o objetivo de estudar o desempenho agronômico de cultivares de bananeira Prata-anã e Maçã, na região de São Manuel-SP. Foram avaliadas as seguintes características de desenvolvimento, no primeiro ciclo de produção: número de dias do plantio à floração e da mesma à colheita, número de rebentos (filhos) emitidos até o surgimento da inflorescência e na época da colheita, número de folhas ativas na época do aparecimento da inflorescência e da colheita, e características de rendimento, como peso médio do cacho, ráquis, penca e fruto, número médio de frutos por penca e cacho, comprimento e diâmetro médio dos frutos. Também foi avaliada a incidência de pragas e doenças. Foi empregado o delineamento inteiramente casualizado, com 2 tratamentos, 15 repetições e 5 plantas úteis por parcela experimental. As duas cultivares foram caracterizadas pelos valores das estatísticas descritivas, média e desvio-padrão, para as características de interesse no experimento. Foram estabelecidas possíveis correlações entre medidas de desenvolvimento e produção. As duas cultivares apresentaram ciclo do plantio até a colheita de 574 dias para 'Prata-anã' e 567 dias para 'Maçã', sendo que o ciclo produtivo foi maior na 'Prata-anã'. Não houve problemas de pragas e doenças em todo o ciclo de produção, nas duas cultivares avaliadas.

Cultivo de bananas em diferentes áreas na ilha de Tenerife

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

EVALUATION OF DIFFUSION-COEFFICIENTS IN OSMOTIC CONCENTRATION OF BANANAS (MUSA-CAVENDISH LAMBERT)

The effect of time of exposure, solution concentration and temperature on the osmotic concentration of banana (slices of 11 mm thickness) was studied in aqueous sucrose solutions. The selectivity of the cellular tissues was reduced by steam blanching the banana slices before osmotic treatment. Effective diffusion coefficients for the loss of water and the increase in sucrose content were determined according to Fick's Law applied to a two-dimensional body; calculated on the basis of the concentration of various components in the liquid phase impenetrating the fruit. These coefficients revealed values similar to binary diffusion coefficients for pure sucrose solutions.

Compostos bioativos e atividade antioxidante em bananas (Musa sp.)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Irradiação e refrigeração na conservação de bananas prata e nanica climatizadas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effects of Black Leaf Streak Disease and Sigatoka Disease on fruit quality and maturation process of bananas produced in the subtropical conditions of southern Brazil

Banana fruits are harvested at the green-mature stage (pre-climacteric) in order to allow sufficient time for transport and marketing. The time between the harvest and the initiation of the natural ripening process is called green life (GL), which is closely correlated to physiological age. Sigatoka Disease (SD: also called yellow Sigatoka) and Black Leaf Streak Disease (BLSD; also called black Sigatoka) are the main foliar diseases affecting banana production. The aim of this work was to investigate the influence of these diseases on banana GL and postharvest behavior in subtropical conditions (southeastern Brazil). The results showed that both diseases shortened the banana's GL when compared to control bananas of the same physiological age. Moreover, fruits from infested plots showed higher values of CO2 (+100% for SD and +300% for BLSD) and C2H4 production (+30% for SD and +60% for BLSD) at the climacteric peak. BLSD caused 40% reduction in fruit weight. Fruits from plants with a high degree of SD or BLSD undergo an altered maturation process. (C) 2011 Elsevier Ltd. All rights reserved.

Isolation and characterization of the flour and starch of plantain bananas (Musa paradisiaca)

Plantain bananas of the variety Terra (Musa paradisiaca) may have industrial value due to their high starch content. In this research, the flour and starch of such unripe fruit were isolated and their chemical, physicochemical, and structural characteristics were determined. Banana flour and starch had a dry basis yield of 50.6 and 28.5%, and an average granule size of 31.7 and 47.3?mu m, respectively. Both raw materials revealed a C-type pattern and high gelatinization temperatures. The peak viscosity was greater for flour (378.0 RVU) than for starch (252.6 RVU), although the final viscosity was lower. At temperatures above 65 degrees C, the swelling power of banana flour was lower than that of starch, while the solubility of flour was greater than that of starch at all temperatures. Furthermore, the presence of other components in banana flour influenced its physicochemical properties. In general, the flour and starch processed from unripe bananas have numerous possible uses as ingredients in food systems and for other industrial purposes.

Blue bananas: development of a task to investigate the representation of synaesthetic experiences

Research has mainly focussed on the perceptual nature of synaesthesia. However, synaesthetic experiences are also semantically represented. It was our aim to develop a task to investigate the semantic representation of the concurrent and its relation to the inducer in grapheme-colour synaesthesia. Non-synaesthetes were either tested with a lexical-decision (i.e., word / non-word) or a semantic-classification (i.e., edibility decision) task. Targets consisted of words which were strongly associated with a specific colour (e.g., banana - yellow) and words which were neutral and not associated with a specific colour (e.g., aunt). Target words were primed with colours: the prime target relationship was either intramodal (i.e., word - word) or crossmodal (colour patch - word). Each of the four task versions consisted of three conditions: congruent (same colour for prime and target), incongruent (different colour), and unrelated (neutral target). For both tasks (i.e., lexical and semantic) and both versions of the task (i.e., intramodal and crossmodal), we expected faster reaction times (RTs) in the congruent condition than in the neutral condition and slower RTs in the incongruent condition than the neutral condition. Stronger effects were expected in the intramodal condition due to the overlap in the prime target modality. The results suggest that the hypotheses were partly confirmed. We conclude that the tasks and hypotheses can be readily adopted to investigate the nature of the representation of the synaesthetic experiences.