Integrated Pb- and S-isotope investigation of sulphide minerals from the early Archaean of southwest Greenland

We present high-spatial resolution secondary ion mass spectrometry (SIMS) measurements of Pb and S isotopes in sulphides from early Archaean samples at two localities in southwest Greenland. Secondary pyrite from a 3.71 Ga sample of magnetite-quartz banded iron formation in the Isua Greenstone Belt, which has previously yielded unradiogenic Pb consistent with its ancient origin, contains sulphur with a mass independently fractionated (MIF) isotope signature (Delta(33)S =+3.3 parts per thousand). This reflects the secondary mineralization of remobilized sedimentary S carrying a component modified by photochemical reactions in the early Archaean atmosphere. It further represents one of the most extreme positive excursions so far known from the early Archaean rock record. Sulphides from a quartz-pyroxene rock and an ultramafic boudin from the island of Akilia, in the Godth (a) over circle bsfjord, have heterogeneous and generally radiogenic Pb isotopic compositions that we interpret to represent partial re-equilibration of Pb between the sulphides and whole rocks during tectonothermal events at 3.6, 2.7 and 1.6 Ga. Both these samples have Delta(33)S=0 (within analytical error) and therefore show no evidence for MIF sulphur. These data are consistent with previous interpretations that the rock cannot be proven to have a sedimentary origin. Our study illustrates that SIMS S-isotope measurements in ancient rocks can be used to elucidate early atmospheric parameters because of the ability to obtain combined S and Pb-isotope data, but caution must be applied when using such data to infer protolith. When information from geological context, petrography and chronology (i.e. by Pb isotopes) is combined and fully evaluated, Delta(33)S signatures from sulphides and their geological significance can be interpreted with a higher degree of confidence. (c) 2005 Elsevier B.V All rights reserved.

Meteorological observations and eddy covariance raw data from polygonal tundra in the Lena River Delta, Siberia

We present the first ecosystem-scale methane flux data from a northern Siberian tundra ecosystem covering the entire snow-free period from spring thaw until initial freeze-back. Eddy covariance measurements of methane emission were carried out from the beginning of June until the end of September in the southern central part of the Lena River Delta (72°22' N, 126°30' E). The study site is located in the zone of continuous permafrost and is characterized by Arctic continental climate with very low precipitation and a mean annual temperature of -14.7°C. We found relatively low fluxes of on average 18.7 mg/m**2/d, which we consider to be because of (1) extremely cold permafrost, (2) substrate limitation of the methanogenic archaea, and (3) a relatively high surface coverage of noninundated, moderately moist areas. Near-surface turbulence as measured by the eddy covariance system in 4 m above the ground surface was identified as the most important control on ecosystem-scale methane emission and explained about 60% of the variance in emissions, while soil temperature explained only 8%. In addition, atmospheric pressure was found to significantly improve an exponential model based on turbulence and soil temperature. Ebullition from waterlogged areas triggered by decreasing atmospheric pressure and near-surface turbulence is thought to be an important pathway that warrants more attention in future studies. The close coupling of methane fluxes and atmospheric parameters demonstrated here raises questions regarding the reliability of enclosure-based measurements, which inherently exclude these parameters.

Statistical Analysis of Sea Surface Temperature and Chlorophyll-a Concentration Patterns in the Gulf of Tadjourah (Djibouti)

The sea surface temperature (SST) and chlorophyll-a concentration (CHL-a) were analysed in the Gulf of Tadjourah from two set of 8-day composite satellite data, respectively from 2008 to 2012 and from 2005 to 2011. A singular spectrum analysis (SSA) shows that the annual cycle of SST is strong (74.3% of variance) and consists of warming (April-October) and cooling (November-March) of about 2.5C than the long-term average. The semi-annual cycle captures only 14.6% of temperature variance and emphasises the drop of SST during July-August. Similarly, the annual cycle of CHL-a (29.7% of variance) depicts high CHL-a from June to October and low concentration from November to May. In addition, the first spatial empirical orthogonal function (EOF) of SST (93% of variance) shows that the seasonal warming/cooling is in phase across the whole study area but the southeastern part always remaining warmer or cooler. In contrast to the SST, the first EOF of CHL-a (54.1% of variance) indicates the continental shelf in phase opposition with the offshore area in winter during which the CHL-a remains sequestrated in the coastal area particularly in the south-east and in the Ghoubet Al-Kharab Bay. Inversely during summer, higher CHL-a quantities appear in the offshore waters. In order to investigate processes generating these patterns, a multichannel spectrum analysis was applied to a set of oceanic (SST, CHL-a) and atmospheric parameters (wind speed, air temperature and air specific humidity). This analysis shows that the SST is well correlated to the atmospheric parameters at an annual scale. The windowed cross correlation indicates that this correlation is significant only from October to May. During this period, the warming was related to the solar heating of the surface water when the wind is low (April-May and October) while the cooling (November-March) was linked to the strong and cold North-East winds and to convective mixing. The summer drop in SST followed by a peak of CHL-a, seems strongly correlated to the upwelling. The second EOF modes of SST and CHL-a explain respectively 1.3% and 5% of the variance and show an east-west gradient during winter that is reversed during summer. This work showed that the seasonal signals have a wide spatial influence and dominate the variability of the SST and CHL-a while the east-west gradient are specific for the Gulf of Tadjourah and seem induced by the local wind modulated by the topography.

Recherche et analyse d'étoiles naines blanches chimiquement stratiées dans le Sloan Digital Sky Survey

Ce mémoire présente une recherche détaillée et une analyse des étoiles naines blanches hybrides chimiquement stratifiées dans le Sloan Digital Sky Survey (SDSS). Une seule étoile stratifiée, PG 1305-017, était connue avant notre recherche. L'objectif principal est de confirmer l'existence de plusieurs nouvelles étoiles stratifiées. Pour ce faire, il a fallu dans un premier temps développer une nouvelle génération de modèles d'atmosphère à partir de ceux de Bergeron et al. (1991) et Tremblay & Bergeron (2009). Nous y avons ajouté l'opacité de toutes les raies d'hélium et les calculs nécessaires pour tenir compte de la stratification chimique de l'atmosphère, où une mince quantité d’hydrogène flotte en équilibre diffusif au-dessus d’une enveloppe massive d’hélium. En parallèle, nous avons aussi calculé des modèles standards, chimiquement homogènes. Ensuite, nous avons sélectionné des naines blanches chaudes (Teff > 30,000 K) de type spectral hybride (traces d'hélium et d'hydrogène) parmi les ~38,000 naines blanches répertoriées dans le SDSS. Un total de 52 spectres d'étoile a été retenu dans notre échantillon final. La technique spectroscopique, c'est-à-dire l'ajustement des raies spectrales des modèles sur un spectre observé, a été appliquée à toutes les étoiles de notre échantillon. Nous avons ainsi mesuré la température effective, la gravité de surface et la composition chimique de l'atmosphère de ces étoiles. Par l'ajustement simultané de modèles stratifiés et homogènes, nous avons aussi pu déterminer si les étoiles étaient stratifiées ou non. Nous identifions ainsi 14 naines blanches stratifiées. Nous tirons de ces résultats plusieurs conclusions sur les processus physiques expliquant la présence d'hélium dans l'atmosphère.

From the traditional verification approach to the spatial methods: a study of applicability of the SAL metric in the framework of the WMO project MesoVICT

Increasing in resolution of numerical weather prediction models has allowed more and more realistic forecasts of atmospheric parameters. Due to the growing variability into predicted fields the traditional verification methods are not always able to describe the model ability because they are based on a grid-point-by-grid-point matching between observation and prediction. Recently, new spatial verification methods have been developed with the aim of show the benefit associated to the high resolution forecast. Nested in among of the MesoVICT international project, the initially aim of this work is to compare the newly tecniques remarking advantages and disadvantages. First of all, the MesoVICT basic examples, represented by synthetic precipitation fields, have been examined. Giving an error evaluation in terms of structure, amplitude and localization of the precipitation fields, the SAL method has been studied more thoroughly respect to the others approaches with its implementation in the core cases of the project. The verification procedure has concerned precipitation fields over central Europe: comparisons between the forecasts performed by the 00z COSMO-2 model and the VERA (Vienna Enhanced Resolution Analysis) have been done. The study of these cases has shown some weaknesses of the methodology examined; in particular has been highlighted the presence of a correlation between the optimal domain size and the extention of the precipitation systems. In order to increase ability of SAL, a subdivision of the original domain in three subdomains has been done and the method has been applied again. Some limits have been found in cases in which at least one of the two domains does not show precipitation. The overall results for the subdomains have been summarized on scatter plots. With the aim to identify systematic errors of the model the variability of the three parameters has been studied for each subdomain.

Recherche et analyse d'étoiles naines blanches chimiquement stratiées dans le Sloan Digital Sky Survey

Ce mémoire présente une recherche détaillée et une analyse des étoiles naines blanches hybrides chimiquement stratifiées dans le Sloan Digital Sky Survey (SDSS). Une seule étoile stratifiée, PG 1305-017, était connue avant notre recherche. L'objectif principal est de confirmer l'existence de plusieurs nouvelles étoiles stratifiées. Pour ce faire, il a fallu dans un premier temps développer une nouvelle génération de modèles d'atmosphère à partir de ceux de Bergeron et al. (1991) et Tremblay & Bergeron (2009). Nous y avons ajouté l'opacité de toutes les raies d'hélium et les calculs nécessaires pour tenir compte de la stratification chimique de l'atmosphère, où une mince quantité d’hydrogène flotte en équilibre diffusif au-dessus d’une enveloppe massive d’hélium. En parallèle, nous avons aussi calculé des modèles standards, chimiquement homogènes. Ensuite, nous avons sélectionné des naines blanches chaudes (Teff > 30,000 K) de type spectral hybride (traces d'hélium et d'hydrogène) parmi les ~38,000 naines blanches répertoriées dans le SDSS. Un total de 52 spectres d'étoile a été retenu dans notre échantillon final. La technique spectroscopique, c'est-à-dire l'ajustement des raies spectrales des modèles sur un spectre observé, a été appliquée à toutes les étoiles de notre échantillon. Nous avons ainsi mesuré la température effective, la gravité de surface et la composition chimique de l'atmosphère de ces étoiles. Par l'ajustement simultané de modèles stratifiés et homogènes, nous avons aussi pu déterminer si les étoiles étaient stratifiées ou non. Nous identifions ainsi 14 naines blanches stratifiées. Nous tirons de ces résultats plusieurs conclusions sur les processus physiques expliquant la présence d'hélium dans l'atmosphère.

A Study on the Transport and Distribution of Atmospheric Aerosols and its Influence on Regional Meteorological Parameters over the Indian Subcontinent

This doctoral thesis addresses the growing concern about the significant changes in the climatic and weather patterns due to the aerosol loading that have taken place in the Indo Gangetic Plain(IGP)which includes most of the Northern Indian region. The study region comprises of major industrial cities in India (New Delhi, Kanpur, Allahabad, Jamshedpur and Kolkata). Northern and central parts of India are one of the most thickly populated areas in the world and have the most intensely farmed areas. Rapid increase in population and urbanization has resulted in an abrupt increase in aerosol concentrations in recent years. The IGP has a major source of coal; therefore most of the industries including numerous thermal power plants that run on coal are located around this region. They inject copious amount of aerosols into the atmosphere. Moreover, the transport of dust aerosols from arid locations is prevalent during the dry months which increase the aerosol loading in theatmosphere. The topography of the place is also ideal for the congregation of aerosols. It is bounded by the Himalayas in the north, Thar Desert in the west, the Vindhyan range in the south and Brahmaputra ridge in the east. During the non‐monsoon months (October to May) the weather in the location is dry with very little rainfall. Surface winds are weak during most of the time in this dry season. The aerosols that reach the location by means of long distance transport and from regional sources get accumulated under these favourable conditions. The increase in aerosol concentration due to the complex combination of aerosol transport and anthropogenic factors mixed with the contribution from the natural sources alters the optical properties and the life time of clouds in the region. The associated perturbations in radiative balance have a significant impact on the meteorological parameters and this in turn determines the precipitation forming process. Therefore, any change in weather which disturbs the normal hydrological pattern is alarming in the socio‐economic point of view. Hence, the main focus of this work is to determine the variation in transport and distribution of aerosols in the region and to understand the interaction of these aerosols with meteorological parameters and cloud properties.

Atmospheric water parameters measured by a ground-based microwave radiometer and compared with the WRF model

The microwave radiometer TROWARA measures integrated water vapour (IWV) and integrated cloud liquid water (ILW) at Bern since 1994 with a time resolution of 7 s. In this study, we compare TROWARA measurements with a simulation of summer 2012 in Switzerland performed with the Weather Research and Forecasting (WRF) model. It is found that the WRF model agrees very well with TROWARA’s IWV variations with a mean bias of only 0.7 mm. The ILW distribution of the WRF model, although similar in shape to TROWARA’s distribution, overestimates the fraction of clear sky periods (83% compared to 60%).

Atmospheric Poaceae pollen frequencies and associations with meteorological parameters in Brisbane, Australia: a 5-year record, 1994-1999

Grass pollen is an important risk factor for allergic rhinitis and asthma in Australia and is the most prevalent pollen component of the aerospora of Brisbane, accounting for 71.6% of the annual airborne pollen load. A 5-year (June 1994-May 1999) monitoring program shows the grass pollen season to occur during the summer and autumn months (December-April), however the timing of onset and intensity of the season vary from year to year. During the pollen season, Poaceae counts exceeding 30 grains m(-3) were recorded on 244 days and coincided with maximum temperatures of 28.1 +/- 2.0degreesC. In this study, statistical associations between atmospheric grass pollen loads and several weather parameters, including maximum temperature, minimum temperature and precipitation, were investigated. Spearman's correlation analysis demonstrated that daily grass pollen counts were positively associated (P < 0.0001) with maximum and minimum temperature during each sampling year. Precipitation, although considered a less important daily factor (P < 0.05), was observed to remove pollen grains from the atmosphere during significant periods of rainfall. This study provides the first insight into the influence of meteorological variables, in particular temperature, on atmospheric Poaceae pollen counts in Brisbane. An awareness of these associations is critical for the prevention and management of allergy and asthma for atopic individuals within this region.

Development and optimization of techniques and design parameters for the engineering of atmospheric pressure plasma devices for biomedical applications and plasma medicine

In the last decades, the possibility to generate plasma at atmospheric pressure gave rise to a new emerging field called plasma medicine; it deals with the application of cold atmospheric pressure plasmas (CAPs) or plasma-activated solutions on or in the human body for therapeutic effects. Thanks to a blend of synergic biologically active agents and biocompatible temperatures, different CAP sources were successfully employed in many different biomedical applications such as dentistry, dermatology, wound healing, cancer treatment, blood coagulation, etc.… Despite their effectiveness has been verified in the above-mentioned biomedical applications, over the years, researchers throughout the world described numerous CAP sources which are still laboratory devices not optimized for the specific application. In this perspective, the aim of this dissertation was the development and the optimization of techniques and design parameters for the engineering of CAP sources for different biomedical applications and plasma medicine among which cancer treatment, dentistry and bioaerosol decontamination. In the first section, the discharge electrical parameters, the behavior of the plasma streamers and the liquid and the gas phase chemistry of a multiwire device for the treatment of liquids were performed. Moreover, two different plasma-activated liquids were used for the treatment of Epithelial Ovarian Cancer cells and fibroblasts to assess their selectivity. In the second section, in accordance with the most important standard regulations for medical devices, were reported the realization steps of a Plasma Gun device easy to handle and expected to be mounted on a tabletop device that could be used for dental clinical applications. In the third section, in relation to the current COVID-19 pandemic, were reported the first steps for the design, realization, and optimization of a dielectric barrier discharge source suitable for the treatment of different types of bioaerosol.