Sintered Sewage Sludge As Support Material Used In Drinking Water Filtration

The processing of industry and domestic effluents in wastewater treatment plants reduces the amount of polluted material and forms reusable water and dehydrated sludge. the generation of hazardous municipal sludge can be decreased, as well as the impact on surface and underground water and the risk to human health. The aim this study is to verify the possibility to use sintered sewage sludge as support material after thermal treatment in the production of a filtering material to water supply systems. After thermal treatment the sewage sludge ash was characterized by X-ray fluorescence (XRF), leaching test and water solubilization. Dehydration of sludge was performed by controlled heating at temperatures of 180 degrees C, 350 degrees C, 600 degrees C, 850 degrees C and 1000 degrees C for 3 hours.

Drinking water as a risk factor to poultry health

In the poultry industry, the use of water with adequate physical, chemical and microbiological quality it is of fundamental importance. Since many birds have access to the same water source, quality problems will affect a great number of animals. The drinking water plays an important role in the transmission of some bacterial, viral and protozoan diseases that are among the most common poultry diseases. Important factors to prevent waterborne diseases in broiler production are the protection of supply sources, water disinfection and the quality control of microbiological, chemical and physical characteristics. Water is an essential nutrient for birds and therefore quality preservation is fundamental for good herd performance. The farmer may prevent many diseases in bird flocks by controlling the quality of the ingested water, will certainly result in decreased costs and increased profit, two essential aims of animal production nowadays.

Simultaneous determination of As, Cu, Mn, Sb, and Se in drinking water by GFAAS with transversely heated graphite atomizer and longitudinal zeeman-effect background correction

A method has been developed for the direct and simultaneous determination of As, Cu, Mn, Sb, and Se in drinking water by electrothermal atomic absorption spectrometry (ETAAS) using a transversely heated graphite tube atomizer (THGA) with longitudinal Zeeman-effect background correction. The thermal behavior of analytes during the pyrolysis and atomization stages was investigated in 0.028 mol L-1 HNO3, 0.14 mol L-1 HNO3 and 1 + 1 (v/v) diluted water using mixtures of Pd(NO3)2 + Mg(NO3)2 as the chemical modifier. With 5 μg Pd + 3 μg Mg as the modifier, the pyrolysis and atomization temperatures of the heating program of the atomizer were fixed at 1400°C and 2100°C, respectively, and 20 μL of the water sample (sample + 0.28 mol L-1 HNO3, 1 + 1, v/v), dispensed into the graphite tube, analytical curves were established ranging from 5.00 -50.0 μg L-1 for As, Sb, Se; 10.0 - 100 μg L-1 for Cu; and 20.0 - 200 μg L-1 for Mn. The characteristic masses were around 39 pg As, 17 pg Cu, 60 pg Mn, 43 pg Sb, and 45 pg Se, and the lifetime of the tube was around 500 firings. The limits of detection (LOD) based on integrated absorbance (0.7 μg L-1 As, 0.2 μg L-1 Cu, 0.6 μg L-1 Mn, 0.3 μg L-1 Sb, 0.9 μg L-1 Se) exceeded the requirements of the Brazilian Food Regulations (decree # 310-ANVS from the Health Department), which established the maximum permissible level for As, Cu, Mn, Sb, and Se at 50 μg L-1, 1000 μg L-1, 2000 μg L-1, 5 μg L-1, and 50 μg L-1, respectively. The relative standard deviations (n = 12) were typically < 5.3% for As, < 0.5% for Cu, < 2.1% for Mn, < 11.7% for Sb, and < 9.2% for Se. The recoveries of As, Cu, Mn, Sb, and Se added to the mineral water samples varied from 102-111%, 91-107%, 92-109%, 89-97%, and 101-109%, respectively. Accuracy for the determination of As, Cu, Mn, Sb, and Se was checked using standard reference materials NIST SRM 1640 - Trace Elements in Natural Water, NIST SRM 1643d - Trace Elements in Water, and 10 mineral water samples. A paired t-test showed that the results were in agreement with the certified values of the standard reference materials at the 95% confidence level.

Detection of hormones in surface and drinking water in Brazil by LC-ESI-MS/MS and ecotoxicological assessment with Daphnia magna

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Chemical and physical factors influencing lead and copper contamination in drinking water: approach for a case study in analytical chemistry

CHEMICAL AND PHYSICAL FACTORS INFLUENCING LEAD AND COPPER CONTAMINATION IN DRINKING WATER: APPROACH FOR A CASE STUDY IN ANALYTICAL CHEMISTRY. Lead and copper concentrations in drinking water increase considerably on going from municipality reservoirs to the households sampled in Ribeirao Preto (SP-Brazil). Flushing of only 3 liters of water reduced metal concentrations by more than 50%. Relatively small changes in water pH rapidly affected corrosion processes in lead pipes, while water hardness appeared to have a long-term effect. This approach aims to encourage University teachers to use its content as a case study in disciplines of Instrumental Analytical Chemistry and consequently increase knowledge about drinking water contamination in locations where no public monitoring of trace metals is in place.

Review of Desalination and Concentrate Management Issues for Increasing Drinking Water Supplies

Water quantity and quality issues worldwide are causing nations to consider alternate sources for drinking water. Desalination and other membrane processes for treatment of seawater and brackish inland waters have been in use for the past quarter century and are growing in use worldwide. These treatment processes create a highly concentrated waste stream in which the principal constituents are dissolved solids. This report provides an overview of desalination methods and the methods available to dispose of this waste stream. Innovative technologies being studied for possible future use are also discussed.

Environmental pollution control alternatives : drinking water treatment for small communities.

Mode of access: Internet.

Is someone contaminating-- your drinking water? : an overview of potentially harmful shallow injection wells.

Mode of access: Internet.

Evaluation of the microbiology standards for drinking water /

Mode of access: Internet.

Coliforms in drinking water emanating from redwood reservoirs /

Mode of access: Internet.

Evaluation of ion exchange softening and corrosiveness of drinking water.

Mode of access: Internet.

Oxidation techniques in drinking water treatment : papers presented at the Conference held in Karlsruhe, Federal Republic of Germany, September 11-13, 1978 /

Mode of access: Internet.

Adsorption techniques in drinking water treatment : papers and discussion from the NATO/CCMS symposium held in Reston, Virginia, USA, April 30 through May 2, 1979 /

Mode of access: Internet.

Drinking water microbiology /

Mode of access: Internet.

The development and application of automated and remote control telemetry for drinking water package plants : cooperative research and development agreement with George H. Drysdale & Associates, Inc..

Mode of access: Internet.