Effect of dentin conditioning time on nanoleakage

Objectives: To study the nanoleakage pattern in the dentin hybrid layer by using different dentin adhesives. The null hypotheses tested in this study were: 1) dentin conditioning time does not affect nanoleakage within the hybrid layer; 2) the type of dentin adhesive used does not affect nanoleakage. Methods: Standardized Class V cavities were prepared in 30 intact human molars on the buccal and lingual surfaces. The specimens were randomly assigned to 2 total-etch dentin adhesives (OptiBond SOLO Plus [OPS, Kerr] and One-Step [ONS, BISCO Inc]) and 2 self-etch dentin adhesives (Clearfil SE Bond [CSE, Kuraray] and Adper Prompt L-Pop [APL, 3M ESPE]). The specimens were etched or conditioned for 15 seconds, 30 seconds or 60 seconds. Upon restoration of the Class V cavities with the proprietary resin composite, the specimens were isolated with nail polish except for a 2.0-mm rim around the restoration, and they were immersed in 50 wt% ammoniacal silver nitrate solution (pH=9.5) for 24 hours followed by 8 hours of immersion in photo-developing solution to reduce the silver ions to metallic silver. The specimens were fixed, dehydrated and processed for FESEM and TEM. Silver penetration was measured along the cervical wall, and data were analyzed with Kruskal-Wallis non-parametric tests at a significance level of 95%. Results: There were no statistically significant differences among the experimental groups for the factor conditioning time (p>0.926). There were significant differences for the variable dentin adhesive (p<0.0001). The least amount of nanoleakage within the hybrid layer occurred with CSE, while ONS resulted in the greatest penetration of silver ions. The adhesives OPS and APL ranked in the intermediary subset. Under TEM, all adhesives resulted in some degree of nanoleakage within the hybrid layer. Both spotted/reticular and water-tree nanoleakage patterns were observed. Significance: Longer conditioning times did not increase nanoleakage within the hybrid layer. Nanoleakage varied with the type of adhesive used.

THE EFFECT of IMMEDIATE DENTIN SEALING on THE MARGINAL ADAPTATION and BOND STRENGTHS of TOTAL-ETCH and SELF-ETCH ADHESIVES

Statement of problem. Sealing ability and bond strengths of total-etch and self-etch dentin adhesives used for immediate dentin sealing have not been assessed and established.Purpose. The purpose of this study was to determine the effectiveness of immediate dentin sealing (IDS) using total-etch or self-etch dentin adhesives on microleakage and microtensile bond strength.Material and methods. Twenty recently extracted molars were selected, and standard MOD inlay preparations were made with the gingival margins located below the cemento-enamel unction. The teeth were assigned to 4 experimental groups (n=5) according to the indirect composite restoration cementation technique used: (1) immediate dentin sealing with Adper Single Bond (TEBI); (2) conventional adhesive cementation technique using Adper Single Bond (TEAI); (3) immediate dentin sealing using Adper Prompt L-Pop (SEBI); or (4) conventional adhesive cementation technique using Adper Prompt L-Pop (SEAI). The restored teeth were thermal cycled 1,000 times between 5 degrees and 55 degrees C and then immersed in 50% ammoniacal silver nitrate. Three specimens per restoration were evaluated for microleakage, according to predefined scores, and submitted to Friedman's test (alpha-.05). The specimens were then sectioned to obtain 0.8 +/- 0.2-mm-thick sticks (with n ranging from 32 to 57 specimens) and submitted to microtensile bond strength (mu TBS) testing. The obtained data were submitted to 2-way ANOVA test (alpha=.05).Results. None of the experimental groups demonstrated complete elimination of marginal microleakage. There were significant differences in microleakage of the tested adhesives (P>.001). IDS microleakage scores were similar to those obtained using the conventional cementation technique (CCT) for both adhesives. The highest mean bond strengths were obtained with TEBI (51.1 MPa), whereas SEAI showed the lowest mean bond strengths (1.7 MPa). IDS resulted in significantly higher bond strengths than CCT (P<.001).Conclusions. Total-etch and self-etch adhesives have a significant effect on IDS. IDS resulted in high bond strengths for both adhesives; however, the microleakage was similar to that obtained with CCT (J Prosthet Dent 2009;102:1-9)

Cytochemistry of fat body trophocytes and ovaries of workers and queens of Melipona quadrifasciata anthidioides (Hymenoptera: Apidae: Meliponini) during vitellogenesis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fish community alterations due to pollution and damming in Tiete and Paranapanema rivers (Brazil)

The Tiete River crosses the metropolitan region of São Paulo (Brazil) and receives a large amount of pollution, in contrast to Paranapanema River which runs in a less populated area. In the inferior portions of the basins of these rivers, a series of reservoirs has been built for hydroelectric energy generation which improve the water quality due to the decantation of suspended soils and aeration in the water spills.Twenty-nine sampling sites were established along the two rivers and in each sampling site, two groups of eight gillnets were used with standardized sizes in two seasons: winter (dry season: June-September 1994) and summer (rainy season: December-March 1995). The fishes were measured and weighed.Twenty-five parameters related. to the water were recorded. PCA and cluster analysis helped to identify two groups of sampling sites. The first one corresponds to the rainy season samples, while the second corresponds to the dry season samples, so evidencing strong seasonal environmental variation. However, the dry season group is still divided into polluted and non-polluted sites, showing that during drought there are larger effects of pollutant concentration due to the decreased flow.A total of 415 kg of fish were caught, corresponding to 8324 individuals belonging to 64 different species, in 22 families and four orders of Teleostei. The largest catches occurred in the middle Tiete River. The catches in the reservoirs of the Tiete River, during the rainy season are superior to those of the dry season. on the other hand, sampling sites located in running water presented an inverse pattern with the largest catches in the dry-season. In river Paranapanema, catches are lower than in the Tiete River, except in Rosana Reservoir during the rainy season. Fish diversity was shown to be a good-indicator of environmental stress. In Tiete River an expressive fall in species richness was detected in the polluted stretches, with dominance of one or two species. In the intermediary stretches, the presence of rapids increases the amount of dissolved oxygen, allowing the development of the most abundant and diverse fish community of the river. Fish communities in the reservoirs of the inferior stretch of Tiete River are more diverse. on the other hand, the damming of the superior reaches of Paranapanema River provoked a decrease in diversity. 0 the whole, types of local fish communities detected, showing different compositions and specific abundances, revealed different ecological situations. A discriminant analysis revealed that the parameters of the water influencing the fish community were: dissolved oxygen, conductivity, nitrogen (nitrate, ammoniacal and albuminoid), phosphate, alkalinity, hardness and iron. Copyright (C) 2003 John Wiley Sons, Ltd.

Características limnológicas da coluna d'água e dos efluentes de viveiros de criação de camarões-da-amazônia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Impacto da manutenção de reprodutores de macrobrachium rosenbergii na qualidade da água

Our objective was to evaluate the impacts caused on pond water quality by maintenance of Macrobrachium rosenbergii broodstock. During eight weeks we determined pH, dissolved oxygen (DO), conductivity, turbidity, particulate suspended material (PSM), nitrogen (N) and phosphorus (P), all in inlet and effluent water. All variables presented higher values in the effluent, except OD. N-ammoniacal concentration (0.013 mg L(-1)) was 2.7 times higher in the effluent pond; NO(2)-N (0.019 mg L(-1)), 2.3; NO(3)-N (0.139 mu g L(-1)), 1.8; PO(4)-P (0.065 mg L(-1)), 7.2; and DP (0,104 mg L(-1)), 4.9 times higher. For TKN (0.67 mg L(-1)) and TP (0.235 mg L(-1)) the values in the pond effluent represent an increase of 0.27 mg L(-1) and 0.175 mg L(-1), respectively. The maintenance of M. rosenbergii broodstock increase the nutrient concentrations, mainly TP, prevent effluent pond released into receiving water bodies on 1, 2 and 3 classes of the CONAMA N degrees 357 Resolution.

Influence of prior 810-nm-diode intracanal laser irradiation on hydrophilic resin-based sealer obturation

Dentin wall structural changes caused by 810-nm-diode laser irradiation can influence the sealing ability of endodontic sealers. The objective of this study was to evaluate the apical leakage of AH Plus and RealSeal resin-based sealers with and without prior diode laser irradiation. Fifty-two single-rooted mandibular premolars were prepared and divided into 4 groups, according to the endodontic sealer used and the use or non-use of laser irradiation. The protocol for laser irradiation was 2.5W, continuous wave in scanning mode, with 4 exposures per tooth. After sample preparation, apical leakage of 50% ammoniacal silver nitrate impregnation was analyzed. When the teeth were not exposed to irradiation, the Real Seal sealer achieved the highest scores, showing the least leakage, with significant differences at the 5% level (Kruskal-Wallis test, p = 0.0004), compared with AH Plus. When the teeth were exposed to the 810-nm-diode laser irradiation, the sealing ability of AH Plus sealer was improved (p = 0282). In the Real Seal groups, the intracanal laser irradiation did not interfere with the leakage index, showing similar results in the GRS and GRSd groups (p = 0.1009).

Tratamento de águas residuárias de suinocultura em reatores anaeróbios horizontais seguidos de reator aeróbio em batelada sequencial

Avaliou-se o desempenho de um sistema combinado anaeróbio-aeróbio para o tratamento de águas residuárias de suinocultura, com concentrações médias de sólidos suspensos totais (SST) de 18.624 e 11.395 mg L-1. Foram utilizados quatro reatores anaeróbios horizontais com volume total de 49,5 L cada, um com manta de lodo (RAHML) e três de leito fixo (RAHLF), instalados em série e seguidos de um reator aeróbio operado em batelada sequencial (RBS) com volume total de 339 L e com alimentação contínua. Nos RAHLF, foram utilizados como meios suporte de anéis de bambu, anéis plásticos de eletroduto corrugado e anéis de bucha (Luffa cillyndrica), respectivamente. Os tempos de detenção hidráulica (TDH) e as cargas orgânicas volumétricas (COV) aplicadas no RAHML foram de 12 e 10 h e 53 e 61 g DQO (L d)-1, respectivamente. O RBS foi operado com ciclo de 24 h e COV de 0,34 e 0,50 g DQO (L d)-1. As eficiências médias de remoção de DQOtotal e SST para o conjunto de reatores anaeróbios horizontais, em série, foram de 96 e 99%, e de 96 e 95%, respectivamente. As maiores produções volumétricas de metano ocorreram nos RAHLF, com valores médios de até 0,744 m³ CH4 (m³ reator d)-1. A inclusão do RBS permitiu melhorar a qualidade do efluente e a estabilidade do sistema de tratamento, atingindo eficiências de remoção de DQOtotal e SST de 99 e 99%, e de 98 e 99%, respectivamente. No RBS, ocorreu nitrificação e desnitrificação, com remoções de N-amoniacal de até 65%.

Ruminal parameters analyzed in remaining digestion residue of roughages in the in vitro/gas system

O desempenho animal é a medida mais direta de se avaliar a qualidade dos alimentos. Entretanto, dados de desempenho são insuficientes para se detectar as possíveis interações que possam ocorrer no ambiente ruminal. O objetivo do presente trabalho foi avaliar os possíveis efeitos associativos nas concentrações de ácidos graxos voláteis (AGVs), nitrogênio amoniacal (N-NH3) e pH da fração líquida remanescente da digestão da matéria seca (MS) de volumosos exclusivos (cana-de-açúcar= CN; capim-elefante com 60 dias= CP60 e 180 dias= CP180 de crescimento; e silagem de milho= SIL) e suas combinações (cana-de-açúcar+silagem de milho= CNSIL; cana-de-açúcar+capim-elefante-60d= CNCP60; cana-de-açúcar+capim-elefante-180d= CNCP180; silagem de milho+capim-elefante-60d= SILCP60; silagem de milho+capim-elefante-180d= SILCP180) na proporção de 50% na MS, que levam a resultados de desempenhos positivos ou negativos de bovinos. As concentrações de AGVs, N-NH3 e pH dos tratamentos foram: CN= 56,9 mmol L-1, 50,1 mg dL-1, 5,7; CNSIL= 61,4 mmol L-1, 50,7 mg dL-1, 5,8; CNCP60= 54,7 mmol L-1, 47,6 mg dL-1, 5,8; CNCP180= 45,4 mmol L-1, 49,4 mg dL-1, 6,0; SIL= 57,2 mmol L-1, 54,0 mg dL-1, 5,8; SILCP60= 57,1 mmol L-1, 53,1 mg dL-1, 5,9; SILCP180= 55,9 mmol L-1, 52,3 mg dL-1, 6,0; CP60= 58,1 mmol L-1, 49,4 mg dL-1, 5,9; CP180= 44,0 mmol L-1, 46,4 mg dL-1, 6,1. Os carboidratos não estruturais e amido, aliados à fibra e proteína, contribuíram para que ocorresse o efeito associativo positivo na mistura 50:50 cana/silagem. Isso pode ter propiciado os melhores resultados de desempenho em bovinos devido ao elevado padrão fermentativo.

Efficiency of aquatic macrophytes to treat Nile tilapia pond effluents

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação de fontes de amônia para o tratamento de fenos de gramíneas tropicais. 2. Compostos nitrogenados

Este estudo foi desenvolvido para se avaliarem as alterações nos conteúdos de compostos nitrogenados dos fenos de braquiária decumbens (Brachiaria decumbnes Stapf) e jaraguá (Hyparrhenia rufa Ness Stapf) não-tratados, tratados com uréia (U - 5,4% da MS), uréia (UL - 5,4% da MS) mais labe-labe (Lablab purpureus L. Sweet, cv. Highworth-3,0% da MS) ou amônia anidra (NH3 -3,0% da MS). A aplicação de amônia anidra ou de uréia aumentou os teores de N total, N insolúvel em detergente neutro, N insolúvel em detergente ácido, N não-protéico e N amoniacal. A amonização diminuiu as relações N insolúvel em detergente neutro/N total e N insolúvel em detergente ácido/N total e aumentou as relações N não-protéico/N total, N amoniacal/N total e os teores de PB. O N aplicado foi retido, principalmente, nas formas de NNP e N amoniacal.

The influence of residual stress and crystallite size on the magnetic properties of electrodepo sited nanocrystalline Pd-Co alloys

Nanocrystalline Pd-Co alloys were obtained by electrodeposition from an ammoniacal chloride bath. The influence of the crystallite size and the residual stress on the magnetic properties of the alloys was investigated. The residual stress increased as the applied current density was increased. It was associated to the high nucleation rate during electrodeposition and correlated to the lattice strain, estimated from the XRD patterns. Also from the XRD patterns the average crystallite size and the lattice constant were determined by Scherrer's and Rietveld's methods, respectively. Both parameters were directly influenced by the applied current density. Magnetic properties such as coercivity, remanence, saturation magnetization and squareness showed strong dependence on the residual stress and crystallite size. Coercivity higher than 1 kOe was achieved when a high current density was applied. High coercivity was attributed to the presence of residual stress and to the small crystallite size of deposits. (C) 2007 Elsevier B.V. All rights reserved.

Collagen and reticular fibers in left ventricular muscle in diabetic rats: Physical exercise prevents its changes?

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aditivos na ensilagem do capim-elefante. II. Qualidade das silagens amostradas por dois métodos

Silages of Pennisetum purpureum Schum. cv. Guaçu prepared with 0, 8, 16 and 24% of ground ear com with husks, wheat bran and saccharin, dry weight of additive/wet weight of green chop basis. The experimental design was a randomized blocks one in split-plot; the plots were the additives and levels, and the sub-plots the sampling methods. The material was ensiled using plastic vessels in middle of which holed pvc pipes (3 inches diameter) were put. These pipes (one per vessel) had the same length as the height of the vessels, and were filled at the same time and compacted the same way as the vessels. The first method of sampling used the material ensiled inside the pvc pipe, which was lifted out from the vessel at the moment of the silo opening. The other sampling method, normaly used in digestibility trials, consisted of samples composed by daily sub-samples collected in the vessels. The pvc sampling method was more efficient because it sampled a profile of the whole silage. All of the silages showed high percentages of lactic acid and low percentages or even absence of butyric acid, though in all silages high ammoniacal-N percentages were detected.

Aditivos na ensilagem do capim-elefante. IV. Fermentação ruminal em ovinos

The ruminai fermentation patterns of sheep fed elephant grass (Pennisetum purpureum Schum.) silage enriched with ground ear corn with husks, wheat bran and saccharin in the levels 0, 8, 16 and 24% dry weight of additive/wet weight of green chop was evaluated. A split-plot randomized block design was used. The plots were the additives and their levels and the sub-plots the time of rumen fluid collection (0, 1, 3, 6, 9, 12 and 24 h after feeding). During the collection period, the sheep were fed 80% of the observed voluntary feed intake of the previous phase. For all additive types and levels used in preparing the silages, high levels of total volatile fat acids were observed, with predominance of the acetic acid. The silages having ground ear corn with husks as additive showed, in the ruminai fluid, ammonia production levels below the recommended for maximum microbial protein synthesis. However, silages with saccharin or wheat bran presented a good ammoniacal-N availability. In the ruminal fluid of the sheep fed ground ear corn with husks or wheat bran the molar proportion of butyric acid was increased and that of acetic acid and pH were decreased, as the levels of the additives in the silage increased.