Estudo do acoplamento do poço injetor nas simulações de injeção cíclica de vapor

Steam injection is a method usually applied to very viscous oils and consists of injecting heat to reduce the viscosity and, therefore, increase the oil mobility, improving the oil production. For designing a steam injection project it is necessary to have a reservoir simulation in order to define the various parameters necessary for an efficient heat reservoir management, and with this, improve the recovery factor of the reservoir. The purpose of this work is to show the influence of the coupled wellbore/reservoir on the thermal simulation of reservoirs under cyclic steam stimulation. In this study, the methodology used in the solution of the problem involved the development of a wellbore model for the integration of steam flow model in injection wellbores, VapMec, and a blackoil reservoir model for the injection of cyclic steam in oil reservoirs. Thus, case studies were developed for shallow and deep reservoirs, whereas the usual configurations of injector well existing in the oil industry, i.e., conventional tubing without packer, conventional tubing with packer and insulated tubing with packer. A comparative study of the injection and production parameters was performed, always considering the same operational conditions, for the two simulation models, non-coupled and a coupled model. It was observed that the results are very similar for the specified well injection rate, whereas significant differences for the specified well pressure. Finally, on the basis of computational experiments, it was concluded that the influence of the coupled wellbore/reservoir in thermal simulations using cyclic steam injection as an enhanced oil recovery method is greater for the specified well pressure, while for the specified well injection rate, the steam flow model for the injector well and the reservoir may be simulated in a non- coupled way

Estudo do acoplamento entre superfícies seletivas de frequência assimétricas em estruturas de multicamadas

This work presents the development of new microwaves structures, filters and high gain antenna, through the cascading of frequency selective surfaces, which uses fractals Dürer and Minkowski patches as elements, addition of an element obtained from the combination of the other two simple the cross dipole and the square spiral. Frequency selective surfaces (FSS) includes a large area of Telecommunications and have been widely used due to its low cost, low weight and ability to integrate with others microwaves circuits. They re especially important in several applications, such as airplane, antennas systems, radomes, rockets, missiles, etc. FSS applications in high frequency ranges have been investigated, as well as applications of cascading structures or multi-layer, and active FSS. In this work, we present results for simulated and measured transmission characteristics of cascaded structures (multilayer), aiming to investigate the behavior of the operation in terms of bandwidth, one of the major problems presented by frequency selective surfaces. Comparisons are made with simulated results, obtained using commercial software such as Ansoft DesignerTM v3 and measured results in the laboratory. Finally, some suggestions are presented for future works on this subject

Arranjos Log-Periódicos Compactos em Microfita com Elementos Fractais de Koch

This work aims to present how the application of fractal geometry to the elements of a log-periodic array can become a good alternative when one wants to reduce the size of the array. Two types of log-periodic arrays were proposed: one with fed by microstrip line and other fed by electromagnetic coupling. To the elements of these arrays were applied fractal Koch contours, at two levels. In order to validate the results obtained some prototypes were built, which were measured on a vector network analyzer and simulated in a software, for comparison. The results presented reductions of 60% in the total area of the arrays, for both types. By analyzing the graphs of return loss, it was observed that the application of fractal contours made different resonant frequencies appear in the arrays. Furthermore, a good agreement was observed between simulated and measured results. The array with feeding by electromagnetic coupling presented, after application of fractal contours, radiation pattern with more smooth forms than the array with feeding by microstrip line

Efeito Kerr magneto-óptico; Ressonância ferromagnética; Acoplamento bilinear; Acoplamento biquadrático

In this work, we investigated the magnetic properties of a monocrystalline Fe thin film and of Fe(80 Å)/Cr(t)/Fe(80 Å) tri-layers, with the nonmagnetic metallic Cr spacer layer thickness varying between 9 Å < t < 40 Å. The samples were deposited by the DC Sputtering on Magnesium Oxide (MgO) substrates, with (100) crystal orientation. For this investigation, experimental magneto-optical Kerr effect (MOKE) magnetometry and ferromagnetic resonance (FMR) techniques were employeed. In this case, these techniques allowed us to study the static and dynamical magnetization properties of our tri-layers. The experimental results were interpreted based on the phenomenological model that takes into account the relevant energy terms to the magnetic free energy to describe the system behavior. In the case of the monocrystalline Fe film, we performed an analytical discussion on the magnetization curves and developed a numerical simulation based on the Stoner-Wohlfarth model, that enables the numerical adjustment of the experimental magnetization curves and obtainment of the anisotropy field values. On the other hand, for the tri-layers, we analyzed the existence of bilinear and biquadratic couplings between the magnetizations of adjacent ferromagnetic layers from measurements of magnetization curves. With the FMR fields and line width angular dependencies, information on the anisotropy in three layers was obtained and the effects of different magnetic relaxation mechanisms were evidenced. It was also possible to observe the dependence of the epitaxy of the multilayers with growth and sputtering parameters. Additionally it was developed the technique of AC magnetic susceptibility in order to obtain further information during the investigation of magnetic thin films

Produção e composição do leite de vacas mantidas em pastagens de capim-elefante submetidas a duas frequências de pastejo

The objective of this study was to evaluate two grazing intervals (IG) for elephant grass (Pennisetum purpureum Schum cv. Cameroon) pasture: one variable, determined by the entry of animals to the paddocks when 95% of active photosynthetic radiation was intercepted by the sward, and fixed 26-day grazing interval. Eight dairy cows were used, averaging 124 days lactation, 516 kg body weight and 17.5 kg daily milk production at the beginning of the trial. The experimental period was 80 days divided into four sub-periods of 20 days each. Data were analyzed in a cross-over design. The grazing frequencies did not influence milk production and composition, plasma urea nitrogen, body condition score and variations in body weight. However, the stocking rate and milk production per hectare were higher for pasture with interval of grazing determined by 95% of active photosynthetic radiation. Thus grazing frequency defined in variable intervals by sward interception of active photosynthetic radiation result in higher milk production per area unit.

Desempenho de bovinos em pastejo submetidos a duas frequências de suplementação no período da seca

This work was carried out to evaluate different frequencies of supplementation during the dry season. Forty-eight Nellore steers with 320 kg of initial live weight were fed with Brachiaria brizantha cv. Marandu pasture on a continuous stocking rate. The animals were submitted to following treatments: Daily supplementation and supplementation three times a week. The animals in both treatments received 7 kg of supplementation animal -1 weekly, and were weighted at 28-day intervals. The data were analyzed by the MIXED procedure in SAS (2004), with measurements repeated over time. The study observed average forage allowance of 4.2 tons of DM ha-1, with 3.5% CP, 82.24% NDF and 64.97% ADF. There was no difference (p < 0.01) among daily weight gains of animals who received daily supplementation and those received supplementation three times a week (0.23 and 0.13 kg day -1, respectively). Therefore, the supplementation intervals did not influence steer performance during the dry season.

Produção e Qualidade Física dos Frutos do Abacaxi sob Diferentes Lâminas e Frequências de Irrigação

The objective of this study was to evaluate the performance of pineapple cultivar Smooth Cayenne as the physical production and the quality of the fruit when subjected to different frequencies of water dpeth and soil water in Triângulo Mineiro - Uberaba-MG. The experimental area soil is Oxisol, clay loam sandy and soft undulating local relief. A randomized block design in a factorial 4 x 2 with four levels of soil water depth (50%, 75%, 100% and 125%) of crop evapotranspiration (ETc) and two irrigation frequencies (1 day and 3 days = F1 = F2) and four replications was utilized. The crop productivity, number of seedlings, mean weight, diameter, and hardness of the fruit, plus water use efficiency were evaluated. Productivity was not significantly affected by the water depth and by the frequency of water applied; however the fruit shell resistance, the efficiency of water use, and ratoon seedlings were significantly influenced by irrigation, the water depth of 50% of the crop evapotranspiration (ETC) provided greater efficiency of water use for the production of pineapple fruit.

Controle postural em adultos com síndrome de Down: acoplamento entre informação sensorial e oscilação corporal

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Formação e estabilidade de Breathers no modelo de Peyrard-Bishop para o DNA

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo de frequências alélicas de STRs do cromossomo X na população brasileira de Araraquara-SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Equações diferenciais com retardo em biologia de populações: Renato Mendes Coutinho. -

Pós-graduação em Física - IFT

Limite de acoplamento forte da QCD e a interação méson-méson

Pós-graduação em Física - IFT

Bósons de spin 0 e spin 1 em um duplo degrau de potencial com acoplamento vetorial não-mínimo no formalismo de Duffin-Kemmer-Petiau

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação de frequências não convencionais na obtenção de curvas de DMA de compósitos poliméricos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Taxas e frequências de alimentação na produção de rã-touro em baias inundadas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)