Structure, tensile properties and cytotoxicity assessment of sebacic acid based biodegradable polyesters with ricinoleic acid

A new family of ricinoleic acid based polyesters was synthesized using catalyst free melt-condensation polymerization with sebacic acid, citric acid, mannitol and ricinoleic acid as precursors. The use of FT-IR and NMR characterisation techniques confirms the presence of ester linkages in the as-synthesized polymers. Depending on the precursor combination, their relative amount and the degree of curing, a broad range of elastic modulus (22-327 MPa) and tensile strength (0.7-12.7 MPa) can be obtained in the newly synthesized biopolymers. The polymers show rubbery behaviour at a physiological temperature (37 degrees C) and the contact angles of the synthesized polymers fall in the range of 42 degrees to 71 degrees, making them ideal substrates to study delivery of drugs through polymer scaffolds. The cytocompatibility assessment of the cured polymers confirmed good cell attachment and growth of smooth muscle cells (C2C12 myoblast cells). Importantly, oriented cell growth was observed after culturing myoblast cells for 3 days. The in vitro degradation in PBS indicates that the mild cured polymers follow a first order reaction kinetics and have degradation rate constants in the range of 0.009-0.038 h(-1), depending on the relative proportions of monomers. Overall, the results of our study indicate that the physical properties can be tailored by varying the composition of the monomers and curing conditions in the newly developed polyesters. Hence, they may be used as potential substrates for tissue engineering scaffolds and for localized drug delivery.

Electron-Rich Triphenylamine-Based Sensors for Picric Acid Detection

This paper demonstrates the role of solvent in selectivity and sensitivity of a series of electron-rich compounds for the detection of trace amounts of picric acid. Two new electron-rich fluorescent esters (6, 7) containing a triphenylamine backbone as well as their analogous carboxylic acids (8, 9) have been synthesized and characterized. Fluorescent triphenylamine coupled with an ethynyl moiety constitutes p-electron-rich selective and sensitive probes for electron-deficient picric acid (PA). In solution, the high sensitivity of all the sensors toward PA can be attributed to a combined effect of the ground-state charge-transfer complex formation and resonance energy transfer between the sensor and analyte. The acids 8 and 9 also showed enhanced sensitivity for nitroaromatics in the solid state, and their enhanced sensitivity could be attributed to exciton migration due to close proximity of the neighboring acid molecules, as evident from the X-ray diffraction study. The compounds were found to be quite sensitive for the detection of trace amount of nitroaromatics in solution, solid, and contact mode.

A colorimetric determination of hydrocyanic acid

The object of this investigation is to devise a rapid, fairly accurate, colorimetric analysis for HCN to be used in field work for determining instantaneous concentrations of the gas under fumigating canvas. A large amount of money is expended yearly by the citrus industry of this state in attempting to control and to eradicate the scale pests. Although fumigation with HCN has been practiced tor many years, the progress made has been anything but satisfactory. The greater portion of the work has always been carried on by contractors, who in a large number of cases have been very unscrupulous. The materials and labor are very expensive and the growers have been satisfied to adhere to beaten paths and hope for the best results on scale kill with the least attendant foliage injury. One familiar with fumigating, either from the grower's or the operator's viewpoint, knows that very widely varying results are obtained, even under what are apparently identical condition. Even after discounting for the dishonesty of some operators and the prejudices of the grower, there is still a large variance between desired or expected results and those actually obtained.

The protein, peptide and free amino-acid contents of some species of Gracilaria from south-east coast of India

Four species of Gracilaria are investigated for their free amino-acid contents, as well as amino-acid constituents in the proteins and the peptides, using quantitative paper chromatographic technique. Amino-acid constituents of different species of Gracilaria differ only in amount, while free amino-acids and the amino-acids in the peptides vary both in quality and quantity. A number of amino-acids recorded as protein constituents have even escaped detection in the peptides, while in the free state they occur either in all the species or in some only except homocystine. Moreover, some amino-acids occur exclusively in the free state.

Studies on fish lipids. Pt. 2. Fatty acid composition of lipids of oil sardine (Sardinella longiceps)

Gas-liquid chromatography has been employed for the qualitative and quantitative analysis of the component fatty acids in lipids of oil sardine (Sardinella longiceps). Phospholipids and triglycerides of the lipids were previously separated by column chromatography before they were converted into the methyl esters of the fatty acids. The predominant acids present in the depot fat of the fish have been found to be C14:0=8.13%, C16:0=27.9%, C18:0=3.8%, C18:1=15.4%., C20:5=10.6% and C22:6=8.8%. Apart from the above acids the distribution of minor acids belonging to Cl8, C20 and C22 groups have also been worked out. The separated phospholipid fraction contained more than 70% polyunsaturated acids of which the important constituents were docosahexaenoic (C22:6=28%) and eicosapentaenoic (C20:5=10.6%). A marked reduction was found in the amounts of polyunsaturated acids in triglycerides, their total amount registering about 20%. This fraction recorded about 48% of C16 acids of which palmitic and palmitoleic acids amounted to 25.8% and 19.1% respectively. Occurrence of odd numbered fatty acids C15 and C17 has also been noted in the phospholipid and composite samples of the fish.

Fatty acid composition of three species of freshwater fishes

Fatty acid composition of freshwater fish tilapia, (Tilapia mosambica), barbus (Barbus carnaticus) and Varal (Ophicephalus) is determined by gas-liquid chromatography. Varal contained the highest amount of C sub(20:5) acid compared to other 2 spp. Of the odd-numbered fatty acids C sub(17) was the predominant fatty acid present. Palmitic acid was found to have a lower level in these fish compared to marine fish. Barbus recorded unusually high percentage of 23.3% of C sub(18:2) acid.

Fatty acid composition of some brown seaweeds (Phaeophyta) from the coast of Karachi

Ten species of filamentous and multicellular thalloid algae (Phaeophyta) belonging to six genera of the class Dictyophyceae were collected from different seawater habitats of Karachi, Pakistan at the northern boundary of the Arabian Sea during September 1997 and July 1998. They were extracted in chloroform: methanol, saponified, subjected to column chromatography (CC, TLC), esterified and analysed for fatty acid (FA) composition initially by gas-liquid-chromatography (GLC) and finally by gas chromatography-mass spectrometry (GC-MS). Algae of the classes Laminariophyceae and Fucophyceae (Phaeophyta) displayed only a few SCFAs, PUFAs and substituted FAs, no VLCFA, C22 UFA, CFA, DCFA and monoynoic FA, large amount of C16:0, very large quantity of C18:1, very small RCCL and FA-diversity, C18 UFAs up to four DBs, C20 UFAs up to three DBs only. They were characterized by the largest amount of C18:1, lowest degree of unsaturation of C20 UFAs, lack of C22 UFAs, the shortest RCCL and the smallest FA-diversity as compared to other phyla.

Fatty acid composition of more brown seaweeds (Phaeophyta) from the coast of Karachi

Six species of multicellular, thalloid, brown algae, belonging to five genera of the classes Laminariophyceae and Fucophyceae were collected from the coastal areas of Buleji near Karachi (Pakistan) during October 1997 and February 1998. They were extracted in chloroform: methanol, saponified, subjected to column chromatography (CC, TLC), esterified and analysed for fatty acid (FA) composition initially by gas-liquid-chromatography (GLC) and finally by gas chromatography-mass spectrometry (GC-MS). They displayed only a few SCFAs, PUFAs and substituted FAs, no VLCFA, C22 UFA, CFA, DCFA and monoynoic FA, large amount of CI6:0, very large quantity of C18:1, very small RCCL and FA-diversity, C18 UFAs up to four DBs, C20 UFAs up to three DBs only. They were characterized by the largest amount of C18:1, lowest degree of unsaturation of C20 UFAs, lack of C22 UFAs, the shortest RCCL and the smallest FA-diversity as compared to other phyla.

The study of Indian shrimp larvae feeding by enriched rotifer with vitamin C and unsaturated fatty acid (epa, dha) and its effects on growth factors, survival rate and environmental stresses

In this experiment, the feeding of Indian white shrimp larvae by unenriched rotifers (treatment 1) and enriched with highly unsaturated fatty acid (treatment 2) and highly unsaturated fatty acid along with vitamin C (treatment 3) on the growth factors, survival and resistance against salinity and formalin stress tests were studied and their differences with control treatment including newly hatched Artemia nauplii is compared. In this the study four treatments in a completely randomized design with 3 replicates per treatment were used. Farming of shrimp larvae of Zoea II to postlarvae 5 was done in 20 liter plastic bucket. Present results indicated that growth factors and survival rate of stage Zoea II to postlarvae 1 in treatments 1, 2 and 3 improve rather than control in which this case was due to optimal size rotifer rather than Artemia nauplii. Also, treatments 2 and 3 feeding with oil liver cod emulsion enriched rotifer have the highest concentration of DHA (mg/g DW) and the ratio DHA/EPA in which due to have shown the highest growth factors and a significant difference (P<0.05) with treatments 1 and control. The highest survival at stage PL1 were observed in treatment 3 that was enriched with ascorbyl palmitate in which have to the synergistic properties of vitamin C rather than treatments 2, 1 and control and showed a significant difference (P<0.05). But in stage PL5 the highest amount of growth and survival rates were related to control treatment which showed a significant difference (P<0.05) with other treatments that control has higher size rather than treatments 1, 2 and 3. Also, among experiment treatments that the two treatments 2 and 3 due to enrichment had higher growth and survival rates compared with treatment 1 in which their differences have also been significant (P<0.05). In the case of stress tests, results indicated that the highest survival rate has been reported when specimens were offered a diet containing high levels of highly unsaturated fatty acids with vitamin C. So that in stage PL1 in the salinity stress tests 10 and 20 ppt the highest survival rate was observed in treatment 3. As for the second, treatment 2 showed a significant difference (P<0.05) with treatment 3. It is worth mentioning that treatment 3 showed a higher survival rate compared to treatment 2 due to the synergistic properties of vitamin C. The difference between these two treatments with treatment 1 and control was also significant. No significant difference was observed in formalin stress test 100 ppm in this stage between treatments 3 and 2 which shows the highest survival rate. But their difference with treatments 1 and control was significant (P<0.05). Also, in stage PL5 in the salinity stress tests 10 and 20 ppt the highest survival rate was observed in treatment 3 which showed no significant difference (P<0.05) with control treatment. While their difference in the amount of survival rate with treatment 1 and 2 was significant (P<0.05). In this stage, the highest observed survival rate in formalin stress test 100 ppm included treatments control, 3 and 2 among which there were no significant differences (P<0.05). While the difference between these three treatments with treatment 1 was significant.

Stabilization of poly(lactic acid) by polycarbodiimide

Polycarbodiimide (CDI) was used to improve the thermal stability of poly(L-lactic acid) (PLA) during processing. The properties of PLA containing various amounts of CDI were characterized by GPC, DSC, rheology, and tensile tests. The results showed that an addition of CDI in an amount of 0.1-0.7 wt% with respect to PLA led to stabilization of PLA at even 210 degrees C for up to 30 min, as evidenced by much smaller changes in molecular weight. melt viscosity, and tensile strength and elongation compared to the blank PLA samples. In order to examine the possible stabilization mechanism, CDI was reacted with water, acetic acid, L-lactic acid, ethanol and low molecular weight PLA. The molecular structures of the reaction products were measured with FTIR.

Synthesis of novel functional polyolefin containing carboxylic acid via Friedel-Crafts acylation reaction

The strong polar group, carboxylic acid, has triumphantly been introduced into ethylene and allylbenzene copolymers without obvious degradation or crosslinking via Friedel-Crafts (F-C) acylation reaction with glutaric anhydride (GA), succinic anhydride (SA) and phthalic anhydride (PA) in the presence of anhydrous aluminum chloride in carbon disulfide. Some important reaction parameters were examined in order to optimize the acylation process. In the optimum reaction conditions, almost all of the phenyls can be acylated with any anhydride. The microstructure of acylated copolymer was characterized by Fr-IR, H-1 NMR and H-1-H-1 COSY. All the peaks of acylated copolymers can be accurately attributed, which indicates that all the acylation reactions occur only at the para-positions of the substituent of the aromatic rings. The thermal behavior was studied by differential scanning calorimetry (DSC), showing that the melting temperatures (T(m)s) of acylated copolymers with GA firstly decrease slowly and then increase significantly with the increase of the amount of carboxyl acid groups.

Adsorption of heavy rare earth(III) with extraction resin containing bis(2,4,4-trimethylpentyl) monothiophosphinic acid

In the present paper, the adsorption of thulium(Ill) from chloride medium on an extraction resin containing bis(2,4,4-trimethylpentyl) monothiophosphinic acid (CL302, HL) has been studied. The results show that 1.5 h is enough for the adsorption equilibrium. The distribution coefficients are determined as a function of the acidity of the aqueous phase and the data are analyzed both graphically and numerically. The plots of log D versus pH give a straight line with a slope of about 3, indicating that 3 protons are released in the adsorption reaction of thulium(III). The content of Cyanex302 in the resin is determined to be 48.21%. The total amount of Tm3+ adsorbed up to resin saturation is determined to be 82.46 mg Tm3+/g resin. Therefore, the sorption reactions of Tm3+ from chloride medium with CL302 can be described as: Tm3+ + 3HL((r)) <----> TmL3(r) + 3H(+) The Freundlich's isothermal adsorption equation is also determined as: log Q = 0.73 log C + 3.05 The amounts (Q) of Tm3+ adsorbed with the resin have been studied at different temperatures (15-40degreesC) at fixed concentrations of Tm3+, amounts of extraction resin, ion strength and acidities in the aqueous phase.

Kinetics study on melt grafting copolymerization of LLDPE with acid monomers using reactive extrusion method

Graft copolymerization in the molten state is of fundamental importance as a probe of chemical modification and reactive compatibilization. However, few grafting kinetics studies on reactive extrusion were carried out for the difficulties as expected. In this work, the macromolecular peroxide-induced grafting of acrylic acid and methyl methacrylate onto linear low density polyethylene by reactive extrusion was chosen as the model system for the kinetics study; the samples were taken out from the barrel at five ports along screw axis and analyzed by FTIR, H-1 NMR, and ESR. For the first time, the time-evolution of reaction rate, the reaction order, and the activation energy of graft copolymerization and homopolymerization in the twin screw extruder were directly obtained. On the basis of these results, the general reaction mechanism was tentatively proposed. It was demonstrated that an amount of chain propagation free radicals could keep alive for several minutes even the peroxides completely decomposed and the addition of monomer to polymeric radicals was the rate-controlled step for the graft copolymerization.

A novel route for the preparation of CdS nanocrystal-poly(acrylic acid) composites using gamma-radiation

CdS nanocrystals were synthesized through AOT/heptane/H2O reverse micelles. New stable reverse mikelles were obtained by adding an appropriate amount of acrylic. acid monomer, CdS nanocrystal-poly(acrylic acid) composites were synthesized by gamma-radiation with a reverse mi'celle route at room temperature. The US nanocrystals with narrow size distribution were, found to be dispersed homogeneously in the poly(acrylic acid) matrix. (C) 2002 Elsevier Science B.V. All rights reserved.

Study of the alkylation of isobutane with n-butene over WO3/ZrO2 strong solid acid. 1. Effect of the preparation method, WO3 loading, and calcination temperature

A series of strong solid acids composed of WO3/ZrO2 were prepared. Their crystal structure, surface state, and acidity were determined by the methods of X-ray diffraction, thermal gravimetric and differential thermal analysis, temperature-programmed reduction, laser Raman, and acidity measurement. The results revealed that ZrO2 in WO3/ZrO2 existed mainly in the tetragonal phase, the addition of WO3 plays an important role in stabilizing the tetragonal phase of ZrO2, and all of the samples possessed large surface areas. WO3 in WO3/ZrO2 is mainly monolayer dispersed, and a small amount crystallized on the ZrO2 surface and partly reacted with ZrO2 to form the bond of Zr-O-W, acting as the strong solid acid center. The catalytic properties of WO3/ZrO2 strong solid;acids for alkylation of isobutane with butene at different conditions were investigated. They had a better reaction performance than other strong solid acids; a parallel relationship could be drawn between the catalytic activity and the acid amounts as well as the acidic strength of the catalysts.