Fracture behavior of concrete–concrete interface using acoustic emission technique

The fracture behavior of concrete–concrete interface is characterized using acoustic emission (AE). Beams of different sizes having jointed interface between two different strengths of concrete are tested. The results of load, displacement, CMOD, AE-events and AE-energy are analyzed. The width of fracture process zone and damage zone are computed using AE-data and are found to be independent of size. It is observed that, as the difference in compressive strength of concrete on either side of interface increases, the load carrying capacity, number of AE-events, AE-energy, width of fracture process zone and damage zone decreases.

Scalable non-linear Support Vector Machine using hierarchical clustering

This paper discusses a method for scaling SVM with Gaussian kernel function to handle large data sets by using a selective sampling strategy for the training set. It employs a scalable hierarchical clustering algorithm to construct cluster indexing structures of the training data in the kernel induced feature space. These are then used for selective sampling of the training data for SVM to impart scalability to the training process. Empirical studies made on real world data sets show that the proposed strategy performs well on large data sets.

Multiple imaging with an aberration optimized hololens array

The imaging performance of hololenses formed with four different geometries were studied through an analysis of their third-order aberration coefficients. It is found that the geometry proposed by Brandt (1969) gives the least residual aberration with minimum variation of this aberration with the reconstruction angle. When the ideal position of one of the construction beams is changed in order to generate a hololens array, the residual aberration is found to increase sharply, which in turn affects the image resolution among the multiplied images in the output. A hololens array was generated using Brandt's geometry with the help of a one-dimensional sinusoidal grating. The results of multiple imaging with the hololens array are presented. The image resolution is reasonably high and can be further improved by reducing the f-number of the hololenses.

Superplasticity in electrodeposited nanocrystalline nickel

Electrodeposited nanocrystalline Ni films were processed with different levels of S, to evaluate the role of S on superplasticity. All the materials exhibited high strain rate superplasticity at a relatively low temperature of 777 K. Microstructural characterization revealed that the S was converted to a Ni3S2 phase which melts at 908 K; no S could be detected at grain boundaries. There was no consistent variation in ductility with S content. Superplasticity was associated with a strain rate sensitivity of similar to 0.8 and an inverse grain size exponent of similar to 1 both of which are unusual observations in superplastic flow of metals. Based on the detailed experiments and analysis, it is concluded that superplasticity in nano-Ni is related to an interface controlled diffusion creep process, and it is not related to the presence of S at grain boundaries or a liquid phase at grain boundaries. (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Combustion synthesis of yttria

Fine-particle, sinter-active yttria has been prepared by combustion of a redox compound, Y(N2H3COO)3·3H2O and mixtures of Y(N2H3COO)3·3H2O�NH4NO3 or NH4ClO4 as well as yttrium nitrate and hydrazine-based fuels. The fineparticle nature of the combustion-derived yttria has been investigated using powder density, particle size and BET surface area measurements. The uniaxially, cold-pressed fine-particle yttria when sintered at 1450�1500 °C achieved 98% theoretical density and showed a fine-grain (1�2 µm) microstructure.

Airborne measurements of aerosol scattering properties above the MABL over Bay of Bengal during W_ICARB - characteristics and spatial gradients

Realizing the importance of aerosol characterization and addressing its spatio-temporal heterogeneities over Bay of Bengal (BoB), campaign mode observations of aerosol parameters were carried out using simultaneous cruise, aircraft and land-based measurements during the Winter Integrated Campaign for Aerosols gases and Radiation Budget (W_ICARB). Under this, airborne measurements of total and hemispheric backscatter coefficients were made over several regions of coastal India and eastern BoB using a three wavelength integrating nephelometer. The measurements include high resolution multi-level (ML) sorties for altitude profiles and bi-level (BL) sorties for spatial gradients within and above the Marine Atmospheric Boundary Layer (MABL) over BoB. The vertical profiles of the scattering coefficients are investigated in light of the information on the vertical structure of the atmospheric stability, which was derived from the collocated GPS (Global Positioning System) aided radiosonde ascents. In general, the altitude profiles revealed that the scattering coefficient remained steady in the convectively well-mixed regions and dropped off above the MABL. This decrease was quite rapid off the Indian mainland, while it was more gradual in the eastern BoB. Investigation on horizontal gradients revealed that the scattering coefficients over northern BoB are 3 to 4 times higher compared to that of central BoB within and above the MABL. A north-south gradient in scattering coefficients is observed over Port Blair in the eastern BoB, with values decreasing from south to north, which is attributed to the similar gradient in the surface wind speed, which can be replicated in the sea salt abundance. The gradients are parameterized using best-fit analytical functions.

Identification of delamination in composite beams using spectral estimation and a genetic algorithm

An efficient strategy for identification of delamination in composite beams and connected structures is presented. A spectral finite-element model consisting of a damaged spectral element is used for model-based prediction of the damaged structural response in the frequency domain. A genetic algorithm (GA) specially tailored for damage identification is derived and is integrated with finite-element code for automation. For best application of the GA, sensitivities of various objective functions with respect to delamination parameters are studied and important conclusions are presented. Model-based simulations of increasing complexity illustrate some of the attractive features of the strategy in terms of accuracy as well as computational cost. This shows the possibility of using such strategies for the development of smart structural health monitoring softwares and systems.

Gene expression in osteoblast cells treated with submicron to nanometer hydroxyapatite-mullite eluate particles

The present research focused on determining the effect of hydroxyapatite-20 wt% mullite (H20M) particle eluates on apoptosis and differentiation of human fetal osteoblast (hFOB) cells. The H20M particles (257 +/- 37 nm) were prepared, starting with the production of a nanocomposite using a unique route of spark plasma sintering, followed by a repeated grinding-cryo treatment and elution process. Tetrazolium based cytotoxicity assay results showed a time-and dose-dependent effect of H20M particle eluates on hFOB cytotoxicity. In particular, the results revealed statistically reduced cell viability after hFOB were exposed to the above 10% H20M (257 +/- 37 nm) eluates for 48 h. The apoptotic cell death triggered by H20M treatment was proven by the analysis of molecular markers of apoptosis, that is, the Bcl-2 family of genes. hFOB expression of Bcl-xL and Bcl-xS significantly increased 25.6- and 25.2-fold for 50% of H20M concentrations, respectively. The ratio of Bcl-xL/Bax (4.01) decreased 2-fold for hFOB exposed to 100% of H20M eluates than that for 10% H20M eluate (7.94) treated hFOB cells. On the other hand, the Bcl-xS/Bax ratio for the 10% H20M eluate was 4.15-fold, whereas for 100% H20M eluates, it was 11.55-fold. Specifically, the anti-apoptotic effect of the H20M particle eluates was corroborated by the up-regulation of bone cell differentiation marker genes such as, collagen type I, cbfa, and osteocalcin. In summary, the present work clearly demonstrated that H20M submicron to nanometer composite particle eluates have a minimal effect on hFOB apoptosis and can even up-regulate the expression of bone cell markers at the molecular level.

饱和脆性岩石在反平面剪切条件下的应变局部化分析

对反平面剪切条件下饱和脆性岩石中单个剪切带的空间发展进行了分析。将饱和岩石视为固液两相介质, 用小扰动方法进行稳定性分析。固相视为弹塑性介质,是应变、应变率和孔隙水压力或应力历史的函数,而液体满足达西定律。考虑惯性效应和相间作用,假设固相是可压的。研究结果表明,如果比例加载路径与局部化方向的夹角为π/2,则变形是稳定的,这相当于中性加载:夹角大于π／2的情况相当于弹性卸载:而夹角小于π／2的情况相当于加载,且当夹角等于0°时,失稳发展最快。扰动频率α正值的条件是要求孔压软化效应超过应变硬化效应。在两种极端情况下——长波和短波,饱和脆性岩石总是稳定的。

Incremento de la productividad de frijol (Phaseolus vulgaris L.) a nivel de finca mediante la inoculación con Rhizobium leguminosarum bv. phaseoli

El efecto de una mezcla de tres cepas de Rhizobium leguminosarum biovar phaseoll (CIAT-613, CR-477 y KIM-5) relacionado con los factores limitantes del suelo (P, Ca, Cu, y Zn) sobre la simbiosis en tres variedades de Phaseolus vulgaris L. (DOR-364, ESTELI-90B y FIEVOLUCION-84) fue estudiado en un suelo Molisol y un Aluvial en las localidades de San Diego (Nandaime) y San Lorenzo (La Trinidad, Estelí), respectivamente, bajo condiciones de labranza convencional para ambas localidades. En la localidad de San Lorenzo se trabajó con las variedades DOR-364 y EST-908 con la corrección del cobre (factor A) y el zinc (factor 8), mientras que en la localidad de San Diego, el trabajo se realizó con las variedades DOR-364 y REVOLUCION-84 y la corrección del calcio (factor A) y el fósforo (factor 8), Ambos estudios se llevaron a cabo en época de postrera de 1994. En los dos ensayos la inoculación se hizo directamente a la semilla. Los tratamientos a evaluar fueron los siguientes: Alto nitrógeno, bajo nitrógeno como testigos (sin inocular), mezcla de inoculantes con (-A,-B), (+A,-B), (-A,+B), y (+A,+B) para un total de seis tratamientos por cada variedad. El diseño usado fue de bloques completos al azar (B.C.A). Las variables evaluadas fueron: Número y peso seco de nódulos, peso de materia seca de la planta en R6, peso de mil granos y rendimiento de grano en R9. Los datos se procesaron usando análisis de varianza (ANDEVA) y se utilizó la prueba de rangos múltiples de DUNCAN (P ≤ 0,05). Se observó a nivel general en ambos experimentos que la variedad introducida mostró un mayor rendimiento y que el mejor rendimiento de grano se obtuvo con el tratamiento en el que se usó alta dosis de nitrógeno y sin inocular. Por otro lado el rendimiento de frijol fue afectado negativamente por las aplicaciones de zinc en el caso del experimento en San Lorenzo. Para la localidad de San Diego se obtuvo respuesta positiva a las aplicaciones de fósforo junto con la mezcla de inoculantes usados. En los dos experimentos no se encontró respuesta significativa con el uso de la mezcla de inoculantes relacionados con los elementos limitantes del suelo comparado con los testigos.

Efecto de tres niveles de gallinaza en plantaciones de cacao (Theobroma cacao L.) en desarrollo

En este trabajo se estudió el efecto del abono orgánico gallinaza sobre el crecimiento y desarrollo del cultivo de cacao (Theobroma cacao L.) en estado juvenil. El ensayo inició en febrero de 1993, en tres fincas con plantaciones comerciales de 20 meses de edad, ubicadas en el municipio El Rama, Región V. Durante catorce meses se realizaron cuatro aplicaciones de fertilizantes, comparando tres niveles de gallinaza (454g, 908g y 1,362 g/árbol/apli­cación)un testigo de fertilización mineral (tres aplicaciones de 100g/árbol de la fórmula 15-15-15 más una aplicación de 100g/árbol de urea al 46 %)y un testigo absoluto sin aplicación. Se utilizó un diseño de bloques completos al azar evaluando las variables con análisis de varianza, separación de medias según Duncan y análisis de regresión y correlación. Los resultados demostraron que la aplicación de 1,362g de gallinaza obtuvo un efecto estadísticamente superior sobre la producción inicial del cacao y sobre el incremento del diámetro de tallo. La aplicación de 454 g y 908 g de gallinaza resultó estadísticamente igual a la fertilización mineral. En cuanto a altura de planta no se detectó diferencias estadísticas entre los tratamientos. La cero aplicación de fertilizantes presentó el menor efecto sobre el crecimiento y producción inicial del cultivo de cacao. El análisis económico mostró que se reducen los costos de fertilización del cultivo con la aplicación de gallinaza, en comparación con la fertilización mineral.

Financiamento de campanhas : problemas do modelo atual e opções legislativas para enfrentá-los

Analisa o financiamento das campanhas, mostrando que os gastos eleitorais, de origem privada, têm crescido num ritmo exponencial. Em 2002, os gastos declarados à Justiça Eleitoral por partidos e candidatos nas campanhas para deputado federal alcançaram R$ 189,6 milhões; em 2010, esse valor chegou ao montante de R$ 908,2 milhões, um crescimento de 479% em oito anos. Na mesma direção, as campanhas presidenciais, que custaram R$ 94 milhões, em 2002, alcançaram a cifra de R$ 590 milhões em 2010, um crescimento de 627% em oito anos.

Rietveld-en metodoa eta Rietveld metodoaren bidezko kristal-egituren finketa.

Gradu amaierako lan hau Rietveld-en metodoan oinarrituz kristal egituren finketen ingurukoa da. Lan honetan, finketekin lotutako kontzeptuak azaldu dira eta ondoren kristal-egituren finketen adibide batzuk erakutsi.