鱼苗养成夏花的成活率高达98.99％—水生生物研究所初步试验成功新的饲养方法

<正> 鱼苗养成夏花的成活率,过去一般只有50%左右,有些低的还不到10%。这是发展淡水养鱼生产的巨大障碍之一。湖北省每年从江中捕获鱼苗很多,留养的数量也很大,但每年大湖放养的鱼种,还要向外省购进。这便说明提高鱼苗养成夏花、养咸鱼种的成活率的重要意义了。我所鱼病学组的工作者,在党的支持下,进行了提高鱼苗养成夏花成活率的饲养方法的试验,已获得良好

Variables affecting melanoidins removal from molasses wastewater by coagulation/flocculation

Coagulation/flocculation process was applied in the polishing treatment of molasses wastewater on a bench-scale. Important operating variables, including coagulant type and dosage, solution pH, rapid mixing conditions as well as the type and dosage of polyeletrolytes were investigated based on the maximum removal efficiencies of chemical oxygen demand (COD) and color, residual turbidity and settling characteristics of flocs. HPSEC was utilized to evaluate the removal of molecular weight fractions of melanoidins-dominated organic compounds. Experimental results indicate that ferric chloride was the most effective among the conventional coagulants, achieving 89% COD and 98% color eliminations; while aluminum sulfate was the least effective, giving COD and color reductions of 66% and 86%, respectively. In addition to metal cations, counter-ions exert significant influence on the coagulation performance since Cl--based metal salts attained better removal efficiency than SO42--based ones at the optimal coagulant dosages. Coagulation of molasses effluent is a highly pH-dependent process, with better removal efficiency achieved at lower pH levels. Rapid mixing intensity, rather than rapid mixing time, has relatively strong influence on the settling characteristics of flocs formed. Lowering mixing intensity resulted in increasing settling rate but the accumulation of floating flocs. When used as coagulant aids, synthetic polyelectrolytes showed little effects on the improvement in organic removal. On the other hand, cationic polyacrylamide was observed to substantially enhance the settleability of flocs as compared to anionic polyacrylamide. The effects of rapid mixing conditions and polymer flocculants on the coagulation performance were discussed. (C) 2009 Elsevier B.V. All rights reserved.

Design consideration and performance of high-power and high-brightness InGaAs-InGaAsP-AlGaAs quantum-well diode lasers (lambda=0.98 mu m)

In this paper, we conduct a theoretical analysis of the design, fabrication, and performance measurement of high-power and high-brightness strained quantum-well lasers emitting at 0.98 mum, The material system of interest consists of an Al-free InGaAs-InGaAsP active region and AlGaAs cladding layers. Some key parameters of the laser structure are theoretically analyzed, and their effects on the laser performance are discussed. The laser material is grown by metal-organic chemical vapor deposition and demonstrates high quality with low-threshold current density, high internal quantum efficiency, and extremely low internal loss. High-performance broad-area multimode and ridge-waveguide single-mode laser devices are fabricated. For 100-mum-wide stripe lasers having a cavity length of 800 mum, a high slope efficiency of 1.08 W-A, a low vertical beam divergence of 34 degrees, a high output power of over 4.45 W, and a very high characteristic temperature coefficient of 250 K were achieved. Lifetime tests performed at 1.2-1.3 W (12-13 mW/mum) demonstrates reliable performance. For 4-mum-wide ridge waveguide single-mode laser devices, a maximum output power of 394 mW and fundamental mode power up to 200 mW with slope efficiency of 0.91 mW/mum are obtained.

An asymmetric broad waveguide structure for a 0.98-μm high-conversion-efficiency diode laser

A novel asymmetric broad waveguide diode laser structure was designed for high power conversion efficiency (PCE). The internal quantum efficiency, the series resistance, and the thermal resistance were theoretically optimized. The series resistance and the thermal resistance were greatly decreased by optimizing the thickness of the P-waveguide and the P-cladding layers. The internal quantum efficiency was increased by introducing a novel strain-compensated GaAs_0.9P_0.1/InGaAs quantum well. Experimentally, a single 1-cm bar with 20% fill factor and 900 μm cavity length was mounted P-side down on a microchannel-cooled heatsink, and a peak PCE of 60% is obtained at 26.3-W continuous wave output power.The results prove that this novel asymmetric waveguide structure design is an efficient approach to improve the PCE.

静压下ZnS（0.02）Te（0.98）混晶的共振喇螺散射研究

于2010-11-23批量导入

抗皮肤真菌海洋放线菌MB-98的分类鉴定

从辽宁省大连海域分离到 1株海洋放线菌 ,编号MB 98,其产生的次生代谢产物对皮肤致病真菌白色念珠菌、石膏样毛癣菌、红色毛癣菌有很好的抑制作用。MB 98在大部分特征培养基上气丝为白色或白略粉 ,基丝为炒米黄或浅芒果棕 ,在所有培养基上均无色素产生 ,电镜观察MB 98孢子丝呈稀疏螺旋型 ,孢子呈椭圆或长圆柱型 ,孢子表面光滑 ,MB 98可以利用大部分碳源。根据分类鉴定研究 ,将MB 98定名为白色链霉菌海洋变种。

Bulk ultrafine binderless (W0.4Al0.6)C prepared by high pressure sintering

Pure (W0.4Al0.6)C powder of about 1 mu m in diameter was sintered by the high pressure sintering (HPS) process without the addition of any binder phase. The microstructure, Vickers micro hardness and density versus the sintering time and temperature are well described. The most suitable sintering condition under pressure of 4.5 GPa is 1873 K for 8 min. Under this sintering condition, the hardness can reach 2295 kg mm(-2) and the relative density can reach 98.6%.

Determination of surface pK(a) of HS(CH2)(10)COOH SAMs using an electrochemical titration method

The self-assembled monolayer(SAM) of 11-mercaptoundecanoic acid [HS(CH2)(10)COOH] was formed on a gold electrode and the effect of the charge of end group on the electrochemical response of Fe(CN)(6)(3-) at the SAM modified electrode was studied by cyclic voltammetry. At high pH, when the -COOH groups are dissociated, the current of Fe(CN)(6)(3-) is suppressed; as the solution pH is lowered, the current of Fe(CN)(6)(3-) increases. The electrochemical titration curve was obtained by correlating the currents of Fe(CN)(6)(3-) to the different pH values of electrolyte, from which the surface pK(a) was obtained to be 3. 0+/-0. 2. Furthermore, the reason of small pK(a) value was explained using SAMs of different surface coverage.

A ferric molybdenum phosphate with a tunnel: hydrothermal synthesis and structure of (NH3CH2CH2NH3)(2)center dot(NH3CH2CH2NH2)(3)center dot Na center dot[Fe2Mo12O30(PO4)(HPO4)(4)(H2PO4)(3)]center dot 7H(2)O

A new ferric molybdenum phosphate containing a tunnel structure and crystallographically different clusters has been hydrothermally synthesized and structurally characterized by single crystal X-ray diffraction. A probe reaction of the oxidation of acetaldehyde with H2O2 using the tide compound as catalyst was carried out in a liquid-solid system, showing that the title compound had high catalytic activity in the reaction. (C) 1998 Elsevier Science S.A. All rights reserved.

Recomendações técnicas para a cultura da soja na Região Central do Brasil 1997/98.

Situação mundial da soja; Produção; Exportações / Importações; Esmagamento; Estoques finais; Farelo de soja; Óleo de soja; Balanço de oferta e demanda mundial de soja no período de 1993/94 e 1996/97; Exigências climáticas; Exigências hídricas; Exigências térmicas e fotoperiódicas; Rotação de culturas; Seleção de especies para rotação de culturas; Planejamento da propriedade; Rotação de culturas com soja no sul do Maranhão; Manejo do solo; Manejo de resíduos culturais; Preparo do solo; Alternância do uso de implementos no preparo do solo; Rompimento da camada compactada; Sistema de semeadura direta; Correção e manutenção da fertilidade do solo; Acidez do solo; Calagem; Qualidade do calcário e condições de uso; Correção da acidez subsuperficial; Exigências minerais e adubação para a cultura da soja; Adubação; Cultivares; Cuidados na aquisição e na utilização de semente; Qualidade da semente; Armazenamento das sementes; Tratamento e inoculação de sementes; Instalação da lavoura; Cuidados relativos ao manuseio das sementes; Época da semeadura; Semeadura na entressafra; População de plantas e espaçamento; Calculo da quantidade de sementes; Controle de plantas daninhas; Informações importantes; Semeadura direta; Disseminação; Resistência; Manejo de pragas; Doenças e medidas de controle; Considerações gerais; Doenças identificadas no Brasil; Principais doenças e medidas de controle; Retenção foliar ("Haster Verde"); Colheita; Fatores que afetam a eficiência da colheita; Avaliação de perdas; Como evitar perdas; Tecnologia de sementes; Seleção do local; Avaliação da qualidade; Remoção de torrões para prevenir a disseminação do nematoide de cisto e do percevejo castanho.

Recomendacoes tecnicas para a cultura da soja no Parana 1997/98.

Situacao mundial da soja; Exigencias climaticas; Rotacao de culturas; Manejo do solo; Correcao e manutencao da fertilidade do solo; Cultivares; Cuidados na aquisicao e na utilizacao de semente; Tratamento e inoculacao de sementes; Instalacao da lavoura; Controle de plantas daninhas; Manejo de pragas; Doencas e medidas de controle; Retenco foliar(Haste verde); Colheita; Tecnologia de sementes.

INFORMES da avaliação de genótipos de girassol, 1997/98 e 1998.

Características gerais da rede oficial de avaliação de genótipos de girassol; Resultados dos ensaios finais e intermediários; Indicação de genótipos.

C 201 INST-D 2013. 382 Artesana Clelia Rengifo montando urdimbre de fique y exhibiendo productos.

18 fotografías a color.