Technical evaluation of a third generation optical pose tracker for motion analysis and image-guided surgery

Laparoscopic instrument tracking systems are an essential component in image-guided interventions and offer new possibilities to improve and automate objective assessment methods of surgical skills. In this study we present our system design to apply a third generation optical pose tracker (Micron- Tracker®) to laparoscopic practice. A technical evaluation of this design is performed in order to analyze its accuracy in computing the laparoscopic instrument tip position. Results show a stable fluctuation error over the entire analyzed workspace. The relative position errors are 1.776±1.675 mm, 1.817±1.762 mm, 1.854±1.740 mm, 2.455±2.164 mm, 2.545±2.496 mm, 2.764±2.342 mm, 2.512±2.493 mm for distances of 50, 100, 150, 200, 250, 300, and 350 mm, respectively. The accumulated distance error increases with the measured distance. The instrument inclination covered by the system is high, from 90 to 7.5 degrees. The system reports a low positional accuracy for the instrument tip.

Supervised classification of minimally invasive surgery psychomotor competence based on instruments motion analysis

Background Objective assessment of psychomotor skills has become an important challenge in the training of minimally invasive surgical (MIS) techniques. Currently, no gold standard defining surgical competence exists for classifying residents according to their surgical skills. Supervised classification has been proposed as a means for objectively establishing competence thresholds in psychomotor skills evaluation. This report presents a study comparing three classification methods for establishing their validity in a set of tasks for basic skills’ assessment. Methods Linear discriminant analysis (LDA), support vector machines (SVM), and adaptive neuro-fuzzy inference systems (ANFIS) were used. A total of 42 participants, divided into an experienced group (4 expert surgeons and 14 residents with >10 laparoscopic surgeries performed) and a nonexperienced group (16 students and 8 residents with <10 laparoscopic surgeries performed), performed three box trainer tasks validated for assessment of MIS psychomotor skills. Instrument movements were captured using the TrEndo tracking system, and nine motion analysis parameters (MAPs) were analyzed. The performance of the classifiers was measured by leave-one-out cross-validation using the scores obtained by the participants. Results The mean accuracy performances of the classifiers were 71 % (LDA), 78.2 % (SVM), and 71.7 % (ANFIS). No statistically significant differences in the performance were identified between the classifiers. Conclusions The three proposed classifiers showed good performance in the discrimination of skills, especially when information from all MAPs and tasks combined were considered. A correlation between the surgeons’ previous experience and their execution of the tasks could be ascertained from results. However, misclassifications across all the classifiers could imply the existence of other factors influencing psychomotor competence.

Time-motion analysis on Chinese male field hockey players

The aim of the study was to evaluate the match work-rate of Chinese field hockey players by analyzing the distance covered at different intensities pooled by specific positions during different periods of matches. Thirty-eight players from twenty-four male field hockey matches at the 11th Chinese National Games were filmed and analyzed.

Time-motion analysis in women’s team handball: importance of aerobic performance

Women’s handball is a sport, which has seen an accelerated development over the last decade. Data on movement patterns in combination with physiological demands are nearly nonexistent in the literature. The aim of this study was twofold: first, to analyze the horizontal movement pattern, including the sprint acceleration profiles, of individual female elite handball players and the corresponding heart rates (HRs) during a match and secondly to determine underlying correlations with individual aerobic performance. Players from one German First League team (n = 11) and the Norwegian National Team (n = 14) were studied during one match using the Sagit system for movement analysis and Polar HR monitoring for analysis of physiological demands. Mean HR during the match was 86 % of maximum HR (HRmax). With the exception of the goalkeepers (GKs, 78 % of HRmax), no position-specific differences could be detected. Total distance covered during the match was 4614 m (2066 m in GKs and 5251 m in field players (FPs)). Total distance consisted of 9.2 % sprinting, 26.7 % fast running, 28.8 % slow running, and 35.5 % walking. Mean velocity varied between 1.9 km/h (0.52 m/s) (GKs) and 4.2 km/h (1.17 m/s) (FPs, no position effect). Field players with a higher level of maximum oxygen uptake (V̇O2max) executed run activities with a higher velocity but comparable percentage of HRmax as compared to players with lower aerobic performance, independent of FP position. Acceleration profile depended on aerobic performance and the field player’s position. In conclusion, a high V̇O2max appears to be important in top-level international women’s handball. Sprint and endurance training should be conducted according to the specific demands of the player’s position.

Symphony 2, D major, opus 73. [music] /

Includes 4 p. analysis in English and Spanish.

Motion analysis of right ventricular wall based on an electromechanical biventricular model

Based on our previously developed electrical heart model, an electromechanical biventricular model, which couples the electrical property and mechanical property of the heart, was constructed and the right ventricular wall motion and deformation was simulated using this model. The model was developed on the basis of composite material theory and finite element method. The excitation propagation was simulated by electrical heart model, and the resultant active forces were used to study the ventricular wall motion during systole. The simulation results show that: (1) The right ventricular free wall moves towards the septum, and at the same time, the base and middle of free wall move towards the apex, which reduce the volume of right ventricle; (2) The minimum principle strain (E3) is largest at the apex, then at the middle of free wall, and its direction is in the approximate direction of epicardial muscle fibers. These results are in good accordance with solutions obtained from MR tagging images. It suggests that such electromechanical biventricular model can be used to assess the mechanical function of two ventricles.

Contribuciones sobre métodos óptimos y subóptimos de aproximaciones poligonales de curvas 2-D

Esta tesis versa sobre el an álisis de la forma de objetos 2D. En visión articial existen numerosos aspectos de los que se pueden extraer información. Uno de los más usados es la forma o el contorno de esos objetos. Esta característica visual de los objetos nos permite, mediante el procesamiento adecuado, extraer información de los objetos, analizar escenas, etc. No obstante el contorno o silueta de los objetos contiene información redundante. Este exceso de datos que no aporta nuevo conocimiento debe ser eliminado, con el objeto de agilizar el procesamiento posterior o de minimizar el tamaño de la representación de ese contorno, para su almacenamiento o transmisión. Esta reducción de datos debe realizarse sin que se produzca una pérdida de información importante para representación del contorno original. Se puede obtener una versión reducida de un contorno eliminando puntos intermedios y uniendo los puntos restantes mediante segmentos. Esta representación reducida de un contorno se conoce como aproximación poligonal. Estas aproximaciones poligonales de contornos representan, por tanto, una versión comprimida de la información original. El principal uso de las mismas es la reducción del volumen de información necesario para representar el contorno de un objeto. No obstante, en los últimos años estas aproximaciones han sido usadas para el reconocimiento de objetos. Para ello los algoritmos de aproximaci ón poligonal se han usado directamente para la extracci ón de los vectores de caracter ísticas empleados en la fase de aprendizaje. Las contribuciones realizadas por tanto en esta tesis se han centrado en diversos aspectos de las aproximaciones poligonales. En la primera contribución se han mejorado varios algoritmos de aproximaciones poligonales, mediante el uso de una fase de preprocesado que acelera estos algoritmos permitiendo incluso mejorar la calidad de las soluciones en un menor tiempo. En la segunda contribución se ha propuesto un nuevo algoritmo de aproximaciones poligonales que obtiene soluciones optimas en un menor espacio de tiempo que el resto de métodos que aparecen en la literatura. En la tercera contribución se ha propuesto un algoritmo de aproximaciones que es capaz de obtener la solución óptima en pocas iteraciones en la mayor parte de los casos. Por último, se ha propuesto una versi ón mejorada del algoritmo óptimo para obtener aproximaciones poligonales que soluciona otro problema de optimización alternativo.

2-(4-Methylphenyl)-1H-anthraceno-[1,2-d]imidazole-6,11-dione: a fluorescent chemosensor

In the title compound, C(22)H(14)N(2)O(2), the five rings of the molecule are not coplanar. There is a significant twist between the four fused rings, which have a slightly arched conformation, and the pendant aromatic ring, as seen in the dihedral angle of 13.16 (8)degrees between the anthraquinonic ring system and the pendant aromatic ring plane.

A 2-D Delaunay refinement algorithm using an initial prerefinement from the boundary mesh

An improvement to the quality bidimensional Delaunay mesh generation algorithm, which combines the mesh refinement algorithms strategy of Ruppert and Shewchuk is proposed in this research. The developed technique uses diametral lenses criterion, introduced by L. P. Chew, with the purpose of eliminating the extremely obtuse triangles in the boundary mesh. This method splits the boundary segment and obtains an initial prerefinement, and thus reducing the number of necessary iterations to generate a high quality sequential triangulation. Moreover, it decreases the intensity of the communication and synchronization between subdomains in parallel mesh refinement.

Upstream porthole injection in a 2-D scramjet model

Injection from portholes upstream of the combustion chamber was investigated as a method of delivering fuel into a scramjet. This method reduces the viscous drag on a model by allowing a reduction in the length of the combustion chamber. At experimental enthalpies of 3.0 MJ/kg in the T4 shock tunnel, there was no evidence of combustion in the intake, either by shadowgraph or pressure measurements. Combustion was observed in the combustion chamber. A theoretical extension of these results is made to a hot wall scenario.

System zur automatischen Erstellung interindividueller 3-D Modelle biologischer Objekte aus 2-D Schnittbildern

Magdeburg, Univ., Fak. für Elektrotechnik und Informationstechnik, Diss., 2011

1.° Itinerarium Antonini, Martyris. — 2.° D. Joannis Mandeville, Militis, de territorio sancti Albani Protomartyris Anglorum, itinerarium. — 3.° Speculum Ecclesiae : authore Fratre Hugone de Sancto Victore. — 4.° Liber qui dicitur solatium animae : authoris nomen non comparet. — 5.° Liber qui dicitur speculum peccatoris : authore anonymo. — 6.° Sermo sancti Augustini, Episcopi, de obedientia.

Colbertinus