Functional assessment and care of children with neurodevelopmental disabilities

Objectives: To determine the relationship between pediatric assessment scores and ratings by parents and teachers regarding the amount of assistance required to complete basic activities of daily living; and to examine the relationship among scores for three commonly used pediatric assessments. Design: Prospective correlational study. 205 children with developmental disabilities. The children ranged in age from 11 to 87 mo and included 72 females and 133 males of diverse socioeconomic and ethnic backgrounds. The children were evaluated by using the Battelle Developmental Inventory Screening Test, Vineland Adaptive Behavior Scales, Functional Independence Measure for Children (WeeFIM(TM) instrument), and the Amount of Assistance Questionnaire, Results: The test-retest reliability coefficients for items on the Amount of Assistance Questionnaire were found to range from 0.82 to 0.97. Correlations among subscale scores and amount of assistance ratings were highest for the WeeFIM instrument and Battelle Developmental Inventory Screening Test. The highest correlation was between WeeFIM total rating and total amount of assistance rating (r = 0.91). Conclusion: Total WeeFIM instrument ratings and severity of disability were the best predictors of amount of assistance ratings provided by parents and teachers.

Reverse Microemulsion Synthesis, Structure, and Luminescence of Nanosized REPO(4):Ln(3+) (RE = La, Y, Gd, or Yb, and Ln = Eu, Tm, or Er)

A surfactant-mediated solution route for the obtainment of nanosized rare-earth orthophosphates of different compositions (LaPO(4):Eu(3+), (Y,Gd)PO(4):Eu(3+),LaPO(4):Tm(3+), YPO(4):Tm(3+), and YbPO(4):Er(3+)) is presented, and the implications of the morphology control on the solids properties are discussed. The solids are prepared in water-in-heptane microemulsions, using cetyltrimethylammonium bromide and 1-butanol as the surfactant and cosurfactant; the alteration of the starting microemulsion composition allows the obtainment of similar to 30 nm thick nanorods with variable length. The morphology and the structure of the solids were evaluated through scanning electron microscopy and through powder X-ray diffractometry; dynamic light scattering and thermal analyses were also performed. The obtained materials were also characterized through vibrational (FTIR) and luminescence spectroscopy (emission/excitation, luminescence lifetimes, chromaticity, and quantum efficiency), where the red, blue, and upconversion emissions of the prepared phosphors were evaluated.

Mapping changes in coastline geomorphic features using Landsat TM and ETM+ imagery: examples in southeastern Brazil

Multitemporal Landsat Thematic Mapper (TM) and Enhanced Thematic Mapper Plus (ETM+) imagery was used to assess coastline morphological changes in southeastern Brazil. A spectral linear mixing approach (SLMA) was used to estimate fraction imagery representing amounts of vegetation, clean water (a proxy for shade) and soil. Fraction abundances were related to erosive and depositional features. Shoreline, sandy banks (including emerged and submerged banks) and sand spits were highlighted mainly by clean water and soil fraction imagery. To evaluate changes in the coastline geomorphic features, the fraction imagery generated for each data set was classified in a contextual approach using a segmentation technique and ISOSEG, an unsupervised classification. Evaluation of the classifications was performed visually and by an error matrix relating ground-truth data to classification results. Comparison of the classification results revealed an intense transformation in the coastline, and that erosive and depositional features are extremely dynamic and subject to change in short periods of time.

Twelve-month Outcomes After Coronary Stenting With the Genous (TM) Bio-Engineered R Stent (TM) in Diabetic Patients from the e-HEALING Registry

Objectives: We compared 12-month outcomes, regarding ischemic events, repeat intervention, and ST, between diabetic and nondiabetic patients treated with the Genous (TM) EPC capturing R stent (TM) during routine nonurgent percutaneous coronary intervention (PCI) using data from the multicenter, prospective worldwide e-HEALING registry. Background: Diabetic patients have an increased risk for restenosis and stent thrombosis (ST). Methods: In the 4,996 patient e-HEALING registry, 273 were insulin requiring diabetics (IRD), 963 were non-IRD (NIRD), and 3,703 were nondiabetics. The 12-month primary outcome was target vessel failure (TVF), defined as target vessel-related cardiac death or myocardial infarction (MI) and target vessel revascularization. Secondary outcomes were the composite of cardiac death, MI or target lesion revascularization (TLR), and individual outcomes including ST. Cumulative event rates were estimated with the Kaplan-Meier method and compared with a log-rank test. Results: TVF rates were respectively 13.4% in IRD, 9.0% in NIRD, and 7.9% in nondiabetics (P < 0.01). This was mainly driven by a higher mortality hazard in IRD (P < 0.001) and NIRD (P = 0.07), compared with nondiabetics. TLR rates were comparable in NIRD and nondiabetics, but significantly higher in IRD (P = 0.04). No difference was observed in ST. Conclusion: The 1-year results of the Genous stent in a real-world population of diabetics show higher TVF rates in diabetics compared with nondiabetics, mainly driven by a higher mortality hazard. IRD is associated with a significant higher TLR hazard. Definite or probable ST in all diabetic patients was comparable with nondiabetics. (J Interven Cardiol 2011;24:285-294)

Clinical results after coronary stenting with the Genous (TM) Bio-engineered R stent (TM): 12-month outcomes of the e-HEALING (Healthy Endothelial Accelerated Lining Inhibits Neointimal Growth) worldwide registry

Aims: e-HEALING is a worldwide, internet-based registry designed to capture post marketing clinical data on the use of the Genous (TM) EPC capturing R stent (TM). Rapid restoration of a healthy endothelial layer after stent placement by capturing circulating endothelial progenitor cells may reduce both stent thrombosis (ST) and in-stent-restenosis. Methods and results: We planned a 5,000 patient registry with >= 1 lesion suitable for stenting. The 12-month primary outcome was target vessel failure (TVF), defined as target vessel-related cardiac death or myocardial infarction (MI) and target vessel revascularisation. Secondary outcomes were the composite of cardiac death, MI or target lesion revascularisation (TLR), and individual outcomes including ST. A total of 4,939 patients received >= 1 Genous stent between 2005 and 2007. Baseline characteristics showed a median age of 63 years, 79% males, 25% diabetics, and 37% with prior MI. A total of 49% of lesions treated were ACC/AHA type B2 or C; 1.1 stents per lesion were used. At 12 months, TVF occurred in 8.4% and the composite of cardiac death, MI or TLR in 7.9%. Twelve-month TLR and ST were 5.7% and 1.1%, respectively. Conclusions: Coronary stenting with the Genous results in good clinical outcomes, and low incidences of repeat revascularisation and ST.

Essential role of TM V and VI for binding the C-terminal sequences of Des-Arg-kinins

In the kallikrein-kinin and renin-angiotensin systems the main receptors, B-1 and B-2 (kinin receptors) and AT(1) and AT(2) (angiotensin receptors) respectively, are seven-transmembrane domain G-protein-coupled receptors. Considering that the B, agonists Des-Arg(9)-BK (Arg-Pro-Pro-Gly-Phe-Ser-Pro-Phe), Lys-desArg(9)-BK or Des-Arg(10)-KD (Lys-Arg-Pro-Pro-Gly-Phe-Ser-Pro-Phe) and the AT, agonist (Asp-Arg-Val-Tyr-lle-His-Pro-Phe) have the same two residues at the C-terminal region (i.e. Pro-Phe), we hypothesized that TM V and TM VI of the B-1 receptor could play an essential role in agonist binding and activity, being these regions receptor sites for binding the C-terminal sequences of Des-Arg-kinins similarly to that observed to AT, receptor. To investigate this hypothesis, we replaced Arg(212) for Ala at the top of the TM V and the sequence 274-282 (CPYHFFAFL) in TM VI of the rat kinin B, receptor by the 32 receptor homologous sequence, 289-297 (FPFQISTFL) and subsequently analyzed the consequences of these mutations by competition binding and functional assays. Despite correct expression, observed at the mRNA and protein level by RT-PCR and confocal microscopy, respectively, no agonist binding and function was verified for the mutated receptors. Therefore, our results suggest an important role for Arg(212) in the TM V and a region of TM VI of rat B, receptor in the interaction with the C-terminal residues of Des-Arg-kinins, similar to that observed with AngII. (c) 2007 Elsevier B.V. All rights reserved.

Canine visceral leishmaniasis: Performance of a rapid diagnostic test (Kalazar Detect (TM)) in dogs with and without signs of the disease

Current visceral leishmaniasis (VL) control programs in Brazil include the infected dog elimination but, despite this strategy, the incidence of human VL is still increasing. One of the reasons is the long delay between sample collection, analysis, control implementation and the low sensitivity of diagnostic tests. Due to the high prevalence of asymptomatic dogs, the diagnosis of these animals is important considering their vector infection capacity. Hence, a rapid and accurate diagnosis of canine visceral leishmaniasis is essential for an efficient surveillance program. In this study we evaluated the performance of rK39 antigen in an immunochromatographic format to detect symptomatic and asymptomatic Leishmania chagasi infection in dogs and compared the results with those using a crude antigen ELISA. The sensitivity of rK39 dipstick and ELISA were 83% vs. 95%, respectively, while the specificity was both 100%. Our results also demonstrated that the dipstick test was able to detect infected dogs presenting different clinical forms. (C) 2008 Elsevier B.V. All rights reserved.

Bond strength of Epiphany (TM) Sealer combined with different adhesive systems photo-activated with LED and QTH

The Epiphany (TM) Sealer is a new dual-curing resin-based sealer and has been introduced as an alternative to gutta-percha and traditional root canal sealers. The canal filling is claimed to create a seal with the dentinal tubules within the root canal system producing a `monoblock` effect between the sealer and dentinal tubules. Therefore, considering the possibility to incorporate the others adhesive systems, it is important to study the bond strength of the resulting cement. Forty-eight root mandibular canines were sectioned 8-mm below CEJ. The dentine discs were prepared using a tapered diamond bur and irrigated with 1% NaOCl and 17% EDTA. Previous the application Epiphany (TM) Sealer, the Epiphany (TM) Primer, AdheSE, and One Up Bond F were applied to the root canal walls. The LED and QTH (Quartz Tungsten Halogen) were used to photo-activation during 45 s with power density of 400 and 720 mW/cm(2), respectively. The specimens were performed on a universal testing machine at a cross-head speed of 1 mm/min until bond failure occurred. The force was recorded and the debonding values were used to calculate Push-out bond strength. The analysis of variance (ANOVA) and Tukey`s post-hoc tests showed significant statistical differences (P < 0.05) to Epiphany (TM) Sealer/Epiphany (TM) Primer/QTH and EpiphanyTM Sealer/AdheSE/QTH, which had the highest mean values of bond strength. The efficiency of resin-based filling materials are dependent the type of light curing unit used including the power density, the polymerization characteristics of these resin-based filling materials, depending on the primer/adhesive used.

Assessment of body composition by bioelectrical impedance analysis without the need for measurement of height

Conventional whole-body single frequency bioelectrical impedance analysis (BIA) of body composition typically uses height as a surrogate measure of conductor length. A new method of BIA analysis for the prediction of body cell mass (BCM) and extracellular water (ECW, as % body weight) not using height has been introduced-the Soft Tissue Analyser (STA(TM), Akern Sri, Florence, Italy)-making it ideal for use in subjects where measurement of height is difficult or impossible. The performance of the new analytical method in predicting BCM and ECW in 139 normal control subjects was assessed by comparison with reference data obtained from a four-component (4-C) model of body composition and with predictions obtained from conventional BIA analysis. Both predicted BCM and ECW were strongly (r = 0.82, SEE = 6.3 kg and 0.89, SEE = 1.3 kg respectively) correlated with the corresponding 4-C model measurements although differing significantly from the lines of identity (P < 0.0001). Fat-free mass, calculated from STA estimates of BCM and ECW, was better predicted (r = 0.91, SEE = 5.6 kg). The significant differences in STA-group mean values for BCM and ECW and wide limits of agreement compared with the reference data indicate that the method cannot be used with confidence for prediction of these body compartments despite the obvious advantage of not requiring an accurate measurement of height. (C) 2001 Harcourt Publishers Ltd.

Randomised controlled trial of telemedicine for new neurological outpatient referrals

Objective-To test the hypothesis that telemedicine for new patient referrals to neurological outpatients is as efficient and acceptable as conventional face to face consultation. Methods-A randomised controlled trial between two groups: face to face (FF) and telemedicine (TM). This study was carried out between a neurological centre and outlying clinics at two distant hospitals linked by identical medium cost commercial interactive video conferencing equipment with ISDN lines transmitting information at 384 kbits/s. The same two neurologists carried out both arms of the study. Of the 168 patients who were suitable for the study, 86 were randomised into the telemedicine group and 82 into the face to face group. Outcome measures were (I) consultation process: (a) number of investigations; (b) number of drugs prescribed; (c) number of patient reviews and (2) patient satisfaction: (a) confidence in consultation; (b) technical aspects of consultation; (c) aspects surrounding confidentiality. Diagnostic categories were also measured to check equivalence between the groups: these were structural neurological, structural non-neurological, nonstructural, and uncertain. Results-Diagnostic categories were similar (p>0.5) between the two groups. Patients in the telemedicine group had significantly more investigations (p=0.001). There was no difference in the number of drugs prescribed (p>0.5). Patients were generally satisfied with both types of consultation process except for concerns about confidentiality and embarrassment in the telemedicine group (p=0.017 and p=0.005 respectively). Conclusion-Telemedicine for new neurological outpatients is possible and feasible but generates more investigations and is less well accepted than face to face examination.

Polipectomia endoscópica com meatotomia média como tratamento de pólipo antrocoanal

Pólipo antrocoanal (PAC) ou pólipo de Killian é uma lesão benigna, não atópica, do seio maxilar. O sintoma predominante é a obstrução nasal. Diversas opções cirúrgicas para o tratamento dos PACs têm sido sugeridas para minimizar a recorrência pós-operatória. A endoscopia vem sendo utilizada como opção terapêutica na ressecção intra-sinusal maxilar da implantação do pólipo através do próprio óstio maxilar ou de uma antrostomia meatal média, com uma menor morbidade que as outras condutas cirúrgicas. OBJETIVO: Avaliar o índice de recidiva da polipectomia endoscópica com meatotomia média no tratamento do PAC. MATERIAL E MÉTODO: Foram avaliados, em estudo retrospectivo, 29 pacientes com o diagnóstico de PAC baseado na história, exame físico, tomografia computadorizada e exame anatomopatológico, tratados entre 1997 e 2004. O procedimento cirúrgico adotado foi polipectomia endoscópica com meatotomia média. RESULTADOS: 29 pacientes com pólipo antrocoanal, 17 (58,6%) do sexo feminino e 12 (41,4%) do masculino, com idades entre 7 e 75 (média 27,55 anos), foram incluídos nesse estudo. Os principais sintomas apresentados foram obstrução nasal, 24 (82%), respiração oral, 11 (37,9%), roncos, 9 (31%), rinorréia, 5 (17%), epistaxe, 2 (6,9%), cefaléia, 2 (6,9%) e gotejamento, 1(3,4%). A associação com atopia foi de 9 (31%). A média de seguimento foi de 17 meses (3-63 meses). Apenas 2 pacientes (6,9%) apresentaram recidiva. CONCLUSÃO: O índice de recidiva obtido por nosso trabalho não difere dos dados da literatura, mesmo quando comparado com procedimentos longamente estabelecidos.

Ensinar desenho: uma experiência pedagógica interdisciplinar num Curso de Design Gráfico

A função do desenho na metodologia projectual do designer tem merecido o interesse de vários autores. Nessas abordagens está presente a afirmação de que o desenho é essencial no processo de investigação do design para o registo de diversas variantes e de várias soluções ao longo da metodologia projectual (Cross, 2007). As profundas alterações da natureza do Design provocadas pelo contexto histórico actual (Norman, 2011), justificam a pertinência de uma reflexão alargada em torno do papel do desenho nos cursos de design, adaptado a esta nova realidade. Este é um desafio colocado hoje às instituições de ensino e seus intervenientes, na organização de estruturas curriculares e métodos pedagógicos. Conceitos como colaboração ou design multidisciplinar, entre outros, têm sido debatidos como estratégias para o ensino do design (Heller and Talarico, 2011, pp. 82-85). Neste contexto, e enquanto docentes nas áreas do Desenho e do Design, importa-nos abordar as seguintes questões:  de que forma é possível enquadrar métodos do desenho ao ensino do design actual?  de que forma poderá o Desenho ser pensado enquanto prática interdisciplinar?  que contributos podem essas práticas trazer para o processo de ensino/aprendizagem? Com base nestas preocupações, desenvolveu-se um projecto interdisciplinar entre as unidades curriculares de Desenho e de Estética e Teoria do Design no Curso de Design Gráfico na Instituição onde leccionamos. Neste artigo apresentaremos os objectivos e o processo desenvolvido, assim como a análise e conclusões desta experiência pedagógica.

Reflexão sobre uma experiência pedagógica interdisciplinar no ensino do desenho num Curso de Design Gráfico

A função do desenho na metodologia projectual do designer tem merecido o interesse de vários autores. Nessas abordagens está presente a afirmação de que o desenho é essencial no processo de investigação do design para o registo de diversas variantes e de várias soluções ao longo da metodologia projectual (Cross, 2007). As profundas alterações da natureza do Design provocadas pelo contexto histórico actual (Norman, 2011), justificam a pertinência de uma reflexão alargada em torno do papel do desenho nos cursos de design, adaptado a esta nova realidade. Este é um desafio colocado hoje às instituições de ensino e seus intervenientes, na organização de estruturas curriculares e métodos pedagógicos. Conceitos como colaboração ou design multidisciplinar, entre outros, têm sido debatidos como estratégias para o ensino do design (Heller and Talarico, 2011, pp. 82-85). Neste contexto, e enquanto docentes nas áreas do Desenho e do Design, importa-nos abordar as seguintes questões:  de que forma é possível enquadrar métodos do desenho ao ensino do design actual?  de que forma poderá o Desenho ser pensado enquanto prática interdisciplinar?  que contributos podem essas práticas trazer para o processo de ensino/aprendizagem? Com base nestas preocupações, desenvolveu-se um projecto interdisciplinar entre as unidades curriculares de Desenho e de Estética e Teoria do Design no Curso de Design Gráfico, na Instituição onde leccionamos. Neste artigo apresentaremos os objectivos e o processo desenvolvido, assim como a análise e conclusões desta experiência pedagógica.