Speaker Diarization Features: The UPM Contribution to the RT09 Evaluation

Two new features have been proposed and used in the Rich Transcription Evaluation 2009 by the Universidad Politécnica de Madrid, which outperform the results of the baseline system. One of the features is the intensity channel contribution, a feature related to the location of the speaker. The second feature is the logarithm of the interpolated fundamental frequency. It is the first time that both features are applied to the clustering stage of multiple distant microphone meetings diarization. It is shown that the inclusion of both features improves the baseline results by 15.36% and 16.71% relative to the development set and the RT 09 set, respectively. If we consider speaker errors only, the relative improvement is 23% and 32.83% on the development set and the RT09 set, respectively.

Wedding Diptych of the Nicmachi and the Symmachi, a Pagan Priestess Priestess at an Altar

Ivory, Early Christian, 4C; 11-3/4 x 4-3/4 in; ivory

Civil engineering bibliography on the design and construction of nuclear facilities /

"DTIE Issuance Date: December 1962."

Jo. Gottlieb. Heineccii ... Antiquitatum romanarum jurisprudentiam illustrantium syntagma secundum ordinem Institutionum Justiniani digestum ... : pars prima.

Mode of access: Internet.

Tratado de las enfermedades periódicas sin calentura, ó sea Historia de estas enfermedades, junto con el verdadero metodo de curarlas /

Mode of access: Internet.

The properties of advanced alumimium alloy systems

2XXX and 7XXX series aluminium alloys have been the accepted materials for airframe construction for many decades. However, only minor improvements in properties have been possible by the development of these alloys since the early 1970's. The constant need to reduce weight in aircraft has therefore led to a resurgence in the research for higher performance aluminium alloys. The reason for this investigation was to evaluate possible alternatives for the existing conventional aluminium alloy 2014 for aircraft wheel applications. Three new technologies in alloy development were considered: a metal matrix composite, an aluminium-lithium alloy and a powder metallurgical alloy. The basic mechanical properties of these advanced materials have already been established to an extent, but their fatigue behaviour has yet to be fully understood. The purpose of this work was to investigate the fatigue properties of the materials concerned, in both air and an aerated 3.5% NaCl solution, and compare these properties to 2014-T6. As well as the basic mechanical properties, fatigue crack propagation data is presented for all of the materials concerned. Additionally, fatigue crack initiation data is presented for the aluminium-lithium alloy and 2014. The D.C. electrical potential method was used to monitor crack growth. Of the materials investigated, the most promising was the aluminium-lithium alloy. However, short transverse properties need to be increased and the commercial cost of the material needs to be decreased before it can be considered as a direct replacement for 2014 for aircraft structural applications. It was considered that the cost of the powder metallurgical alloy would limit its further use. The metal matrix composite material proved to be unsuitable for most ambient temperature applications

Integrated sensitivity analysis, calibration, and uncertainty propagation analysis approaches for supporting hydrological modeling

The successful performance of a hydrological model is usually challenged by the quality of the sensitivity analysis, calibration and uncertainty analysis carried out in the modeling exercise and subsequent simulation results. This is especially important under changing climatic conditions where there are more uncertainties associated with climate models and downscaling processes that increase the complexities of the hydrological modeling system. In response to these challenges and to improve the performance of the hydrological models under changing climatic conditions, this research proposed five new methods for supporting hydrological modeling. First, a design of experiment aided sensitivity analysis and parameterization (DOE-SAP) method was proposed to investigate the significant parameters and provide more reliable sensitivity analysis for improving parameterization during hydrological modeling. The better calibration results along with the advanced sensitivity analysis for significant parameters and their interactions were achieved in the case study. Second, a comprehensive uncertainty evaluation scheme was developed to evaluate three uncertainty analysis methods, the sequential uncertainty fitting version 2 (SUFI-2), generalized likelihood uncertainty estimation (GLUE) and Parameter solution (ParaSol) methods. The results showed that the SUFI-2 performed better than the other two methods based on calibration and uncertainty analysis results. The proposed evaluation scheme demonstrated that it is capable of selecting the most suitable uncertainty method for case studies. Third, a novel sequential multi-criteria based calibration and uncertainty analysis (SMC-CUA) method was proposed to improve the efficiency of calibration and uncertainty analysis and control the phenomenon of equifinality. The results showed that the SMC-CUA method was able to provide better uncertainty analysis results with high computational efficiency compared to the SUFI-2 and GLUE methods and control parameter uncertainty and the equifinality effect without sacrificing simulation performance. Fourth, an innovative response based statistical evaluation method (RESEM) was proposed for estimating the uncertainty propagated effects and providing long-term prediction for hydrological responses under changing climatic conditions. By using RESEM, the uncertainty propagated from statistical downscaling to hydrological modeling can be evaluated. Fifth, an integrated simulation-based evaluation system for uncertainty propagation analysis (ISES-UPA) was proposed for investigating the effects and contributions of different uncertainty components to the total propagated uncertainty from statistical downscaling. Using ISES-UPA, the uncertainty from statistical downscaling, uncertainty from hydrological modeling, and the total uncertainty from two uncertainty sources can be compared and quantified. The feasibility of all the methods has been tested using hypothetical and real-world case studies. The proposed methods can also be integrated as a hydrological modeling system to better support hydrological studies under changing climatic conditions. The results from the proposed integrated hydrological modeling system can be used as scientific references for decision makers to reduce the potential risk of damages caused by extreme events for long-term water resource management and planning.

Elettrodeposizione di catalizzatori a base di Rh su schiume e fibre metalliche di FeCrAlloy per la produzione di syngas

The preparation of structured catalysts active in the catalytic partial oxidation of methane to syngas, was performed by electrosynthesis of hydroxides on FeCrAlloy foams and fibers. Rh/Mg/Al hydrotalcite-type compounds were prepared by co-precipitation of metallic cations on the support and successive calcination. Electrochemical reactions have been studied during the electrodeposition by linear sweep voltammetry. The experiments were performed at supports immersed in KNO3, KCl, Mg2+ and Al3+ aqueous solutions, starting by different precursors (nitrate and chlorides salts) and modifying the Mg/A ratio. Rh/Mg/Al hydrotalcite-type compounds were deposited on metal foams by applying a -1.2V vs SCE potential for 2000s with a nitrate solution of 0.06M total metal concentration. Firstly it was studied the effect of Mg on the coating propierties, modifying the Rh/Mg/Al atomic ratio (5/70/25, 5/50/45, 5/25/70 e 5/0/95). Then the effect of the amount of Rh was later investigated in the sample with the largest Mg content (Rh/Mg/Al = 5/70/25 and 2/70/28).The results showed that magnesium allowed obtaining the most homogeneous and well adherent coatings, wherein rhodium was well dispersed. The sample with the Rh/Mg /Al ratio equal to5/70/25 showed the best catalytic performances. Decreasing the Rh content, the properties of the coating were not modified, but the catalytic activity was lower, due to a not enough number of active sites to convert the methane. The work on metal fibers focused on the effect of precursor concentration, keeping constant composition, potential and synthesis time at the values of Rh/Mg/Al =5/70/25, -1.2V vs SCE and 1000s. However fibers geometry did not allow to obtain a high quality coating, even if results were quite promising.

Construir no construído construção de espaços públicos

Dissertação de Mestrado para obtenção do grau de Mestre em Arquitectura, apresentada na Universidade de Lisboa - Faculdade de Arquitectura.

Galanin N-Terminal fragment (1-15) enhances the antidepressant effects of the 5-HT1A receptor agonist 8-OH-DPAT in the Forced Swimming Test.

Galanin and Galanin (1-15) [GAL(1-15)] are implicated in anxiety- and depression related behaviors. Moreover, Galanin modulates 5-HT1A receptor (5-HT1AR) function at autorreceptor and postsynaptic level in the brain. In this study, we have analysed the ability of GAL(1-15) to modulate the effects of the 8-OH-DPAT agonist in the Forced Swimming Test (FST). Groups of rats were assessed in the FST. In the first set of experiments, to evaluate the interactions of 8-OH-DPAT and GAL(1-15), rats received subcutaneously (s.c) the effective doses of 8-OH-DPAT (0.25mg/Kg) 60min before the test and intracerebroventricularly (icv) GAL(1-15)1nmol 15min before the tests alone or in combination. In the second set of experiments, groups of rats received s.c. 8-OH-DPAT (0.125mg/Kg), icv GAL(1-15) 1nmol and icv the GALR2 antagonist M871 3 nmol alone or in combination. The locomotor activity was analysed in the open field test. GAL(1-15) 1nmol enhanced the antidepressant-like effects mediated by the effective dose of the 8-OH-DPAT. GAL(1-15) significantly decreased the immobility (p<0.05) and climbing (p<0.05) and increased the swimming (p<0.01) behaviour induced by an effective dose of 8-OH-DPAT (0.25mg/Kg) in FST. Moreover, after coadministration of GAL(1-15) and threshold dose of 8-OH-DPAT (0.125mg/Kg) a significant decreased appeared in immobility (p<0.01) and climbing (p<0.01) and increased the swimming behavior (p<0.001) vs 8-OH-DPAT group. Moreover, M871 blocked completely this interaction. These results indicate that GAL(1-15) enhances the antidepressant effects induced by 8-OH-DPAT in the FST. These findings may give the basis for the development of novel therapeutic drugs. This study was supported by Junta de Andalucía CVI6476.