Cana-de-açúcar hidrolisada com doses crescentes de cal virgem e tempos de exposição ao ar para a alimentação de bovinos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Digestibility and nitrogen balance of lambs fed sugarcane hydrolyzed under different conditions as roughage in the diet

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento de tijolos cerâmicos com escória de alto-forno

The construction industry is booming, and the federal government is heavily financially supporting public housing. This scenario is very favorable for the development of construction materials, especially low-cost construction. Thus, this study aims to develop a new class of unfired clay masonry bricks: GGBS stabilized bricks. Studies show that the ground granulated blast furnace slag, a material used as raw material in cement manufacture, can be used together with calcium oxide in soil stabilization for the manufacture of bricks. This study aims to test and identify the best parameters for the manufacture of unfired bricks, adapting its composition to the materials found in Brazil and identify the optimum curing conditions for our climate. So far preliminary studies were done to verify the technical feasibility of the material. Future studies should be done to ascertain the economic feasibility and environmental gains of such material

Quantitative measures of lambs fed hydrolyzed sugarcane under aerobic and anaerobic conditions

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Chemical composition and in vitro digestibility of fresh sugarcane hydrolysed with calcium oxide (CaO)

The objective was to evaluate the chemical composition and in vitro digestibility of sugarcane hydrolysed with increasing doses of calcium oxide and varying air exposure times. A completely randomised, split plot design was used; the doses were allocated to the plots, and the air exposure times were allocated to the subplots, with four repetitions. The data underwent analysis of variance and were laid out according to the effect of the treatment on the components of polynomial regressions, and evaluated at the 5% probability. The increase in the dosage negatively affected the quantities of neutral-detergent fibre (NDF), acid-detergent fibre (ADF), lignin (LIG), total carbohydrates (TC), cellulose (CEL), crude protein (CP), and ether extract (EE); and positively affected the quantities of non-fibrous carbohydrates (NFC) and mineral matter (MM). The addition of calcium oxide improved the in vitro digestible dry matter (IVDMD) coefficients and was able to keep up to 72 hours. The in vitro digestibility of the neutral-detergent fibre (IVDNDF) and of the acid-detergent fibre (IVDADF) coefficients decreased when calcium oxide was added. Calcium oxide has the ability to hydrolyse the fibrous fraction and conserve chopped sugarcane. Doses of 0.5 and 1.0% lime exhibited similar results to those achieved at higher doses; therefore, higher doses are not required in the hydrolyses of sugarcane. Over time, the sugarcane deteriorates, but this deterioration is reduced by the addition of calcium oxide.

Bromatological characteristics and in vitro digestibility of four sugarcane varieties subjected or not to the application of quicklime

The experiment was conducted to evaluate the bromatological characteristics and the in vitro digestibility of four sugarcane varieties, subjected or not to hydrolysis, with quicklime. A completely randomized design was employed with three replications arranged in a 4 × 2 factorial scheme, with four sugarcane varieties (SP 52454, RB 867515, RB 855536 and IAC 862480), hydrolyzed or not. There was significant effect on brix (p < 0.05) and industrial fiber (p < 0.05), and IAC 862480 variety had the lowest levels of industrial fiber. There were no significant difference (p > 0.05) in neutral detergent fiber, acid detergent fiber and lignin levels among the sugarcane varieties under analysis and for the sugarcanes, hydrolyzed or not. The use of sugarcane hydrolysis with 1% quicklime improves the in vitro digestibility of NDF and ADF, regardless of the variety studied. Hydrolysis with 1% quicklime did not alter the sugarcane chemical composition.

Estudo de tensoativos na organofilização de argila bentonítica para uso em fluido de perfuração à base de óleo

Due to the great challenges encountered in drilling wells, there is a need to develop fluids with appropriated properties and able to meet all the requirements of drilling operations. The physicochemical and rheological properties must be carefully controlled so that a fluid can exercise all its functions. In perforations sensitive to contact with water and "offshore", it becomes necessary the use of oil based drilling fluids, but the bentonite clay cannot be used without a previous surface modification so that their surfaces become hydrophobic. Lately, the oil companies in Brazil use imported organoclays in the preparation of oil-based drilling fluids. The study aimed to modify a calcium clay to increase the affinity of the same organic phase of oil-based drilling fluids, applying three surfactants (OCS, CTAB and UTM 150) at different concentrations. The results indicated that the surfactants UTM 150 and CTAB showed better results compared to OCS. Considering the type of surfactant and concentration as variables used in the statistical analysis, the results indicated that only the surface tension and concentration of calcium oxide in response to organophilization process showed statistically significant effects. The organophilizated clay has potential for application in oil-based drilling fluids.

Estudo de sistemas vítreos para infiltração em alumina

The system in-Ceram Alumina, produced by VITA, consists in a technique of prepare of a substructure of ceramics to dental crowns. First burning is made in the alumina decanted by slip casting process under a stone die that reproduces the tooth prepared to receive a crown. In a second burning, alumina is infiltrated by vitreous system, giving to this set a high mechanic resistance. In this work, it s made a study of the composition of a new infiltrating material more used nowadays, giving to alumina desirable mechanics proprieties to its using like substructure of support to ceramic s crown used in the market today. The addition of Lanthanum oxide (frit A) and calcium oxide (frit B) was made in attempt to increase the viscosity of LZSA and to reduce fusion temperature. The frits were put over samples of alumina and took to the tubular oven to 1400ºC under vacuum for two groups (groups 1 and 2). For another two groups (groups 3 and 4) it was made a second infiltration, following the same parameters of the first. A fifth group was utilized like group of control where the samples of pure alumina were not submitted to any infiltrating process. Glasses manifested efficient both in quality and results of analysis of mechanic resistance, being perfectly compatible with oral environment in this technical requisite. The groups that made a second infiltration had he best results of fracture toughness, qualify the use in the oral cavity in this technical question. The average of results achieved for mechanic resistance to groups 1, 2, 3, 4 and 5 were respectively 98 MPa, 90 MPa, 144 MPa, 236 MPa and 23 MPa

Avaliação da ação do hidróxido de cálcio sobre LPS de Pseudomonas aeruginosa por meio da liberação de óxido nítrico e TNF-'ALFA' em cultura de macrófagos peritoneais de camundongos

Pós-graduação em Odontologia - FOAR

Composições varistoras à base de óxido misto de cálcio, cobre e titânio (CCTO) e titanato de cálcio (CaTiO3) e respectivo método de obtenção de blocos varistores

A presente invenção refere-se a composições varistoras à base de óxidos metálicos, mais particularmente à base de óxido misto de cálcio, cobre e titánio (CCTO), com a presença, ou não, de titanato de cálcio (CaTiO~ 3~), para conformação de blocos cerâmicos varistores (resistores não-lineares).

Propriedades físico-química e antibacteriana de medicações intracanal a base de hidróxido de cálcio e óxido de zinco micro e nanoparticulados

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Lixiviação de cálcio, magnésio e potássio em colunas de um latossolo amarelo distrófico textura média, de Luis Eduardo Magalhães - Ba, em resposta as doses de óxido de magnésio combinadas com gesso.

O estudo da movimentação de nutrientes no solo é fundamental para nortear a sua correção, a fim de favorecer maiores produtividades das culturas. Resssalta-se que é interessante não se ter uma correção do solo somente superficial, mas também condicionando o perfil até a profundidade que alcançam as raízes absorventes de nutrientes. Por outro lado, se a translocação de nutrientes for elevada podem avançar além da profundidade das raízes e serem perdidos por lixiviação e dessa forma podem contaminar as águas subterrâneas. Diante do exposto, o presente trabalho objetivou avaliar a lixiviação de cálcio, magnésio e potássio em colunas de solo em resposta a aplicação de calcário e a combinação de gesso e óxido de magnésio. O ensaio em colunas de PVC foi conduzido no laboratório na Embrapa Solos, segundo um delineamento de blocos casualizados e um arranjo fatorial 1x1x3+2+1, correspondendo a um solo: Latossolo Amarelo distrófico textura média de Luis Eduardo Magalhães- BA, uma proporção de magnesita:gesso (1:1), três doses dessa combinação referente à soma de Ca2+ e de Mg2+ equivalente a 2,0; 4,0 e 8,0 cmolc/dm3 de solo (15, 30 e 45 kg/ha de óxido de magnésio) e mais três tratamentos testemunha, (dois solos adicionados de calcário dolomítico 82,70% de PRNT, elevando a saturação de bases para 60%) recomendada pela Comissão de fertilidade do Solo do Estado de Minas Gerais (1999), e uma amostra do solo sem nenhuma aplicação de corretivos, com três repetições. Nos tratamentos com gesso e magnesita foram incorporados a uma profundidade de 0-5 cm, simulando uma correção num manejo com plantio direto. As testemunhas com calcário possuem duas profundidades, 0-5 e 0-20 cm, simulando correção no plantio direto e convencional respectivamente. O solo recebeu aplicação de água para atingir 70% da capacidade de campo em seguida as colunas foram incubadas. Após esse período iniciou-se uma simulação de chuva com volumes correspondentes ao mês de maior intensidade da região, foi aplicado um volume de água destilada de 110 mL. Sendo que foram divididos em 12 aplicações, realizando 3 aplicações por semana durante o período de 1 mês. O lixiviado foi coletado no dia seguinte as recargas, e foram realizadas análises de cálcio, magnésio, por espectrometria de plasma (icp - oes) e potássio por fotometria de chama, conforme Embrapa (1997). A perda total de cátions no lixiviado foi calculada somando-se a concentração das 12 coletas, e fazendo-se em seguida a média das três repetições. Observou-se que as perdas de magnésio, cálcio e potássio no lixiviado foram influenciadas pelas doses de óxido de magnésio combinadas com gesso, quanto maior a dose maior a perda. E seguiram a seguinte ordem: K+ >> Ca2+ > Mg2+. Além disso, verificou-se que a dose de 15 kg/ha de óxido de magnésio levou a menor perda no lixiviado. Alerta-se para o risco de perda expressiva de potássio e contaminação de águas subterrâneas neste solo de textura média caso aplicação de gesso não seja de forma equilibrada.

Obtenção de cerâmicas à base de tricálcio fosfatos utilizando óxido de magnésio como aditivo

The tricalcium phosphate ceramics has been widely investigated in the last years due its bioresorbable behavior. The limiting factor of the application of these materials as temporary implants is its low strength resistance. The tricalcium phosphate presents an allotropic transformation β→α around 1250 ºC that degrades its resistance. Some studies have been developed in order to densify this material at this temperature range. The objective of this work is to study the influence of the addition of magnesium oxide (MgO) in the sintering of β-TCP. The processing route was uniaxial hot pressing and its objective was to obtain dense samples. The samples were physically characterized through density and porosity measurements. The thermal behavior was studied through dilatometric, thermal differential and thermogravimetric analysis. The mechanical properties were characterized by three point flexure test and Vickers microhardness measurements, analyzed of the microstructure. The addition of magnesium oxide doesn t cause an improvement of the mechanical strength in relation to material without additive.

Obtenção de cerâmicas à base de tricálcio fosfatos utilizando óxido de manganês como aditivo

The calcium phosphate ceramics have been very investigated as material for bone implants. The tricalcium phosphate (β-TCP) had a great potential for application in temporary implants like a resorbable bioceramic. This material presents a limitation in its sintering temperature due to occurrence of the allotropic transformation β → α at temperatures around 1200°C, not allowing the attainment of dense ceramic bodies. This transformation also causes cracks, what diminishes the mechanical strength, limiting its use to applications of low mechanical requests. This work studies the influence of the addition of manganese oxide in the sintering of β-TCP. Two processing routes were investigated. The first was the powder metallurgy conventional process. The test bodies (samples) were pressed and sintering at temperatures of 1200 and 1250°C. The second route was uniaxial hot pressing and its objective was to obtain samples with high relative density. The samples were physically characterized through density and porosity measurements. The thermal behavior was studied through dilatometric, thermal differential and thermogravimetric analysis. The mechanical properties were characterized by three point flexure test and Vickers microhardness measurements. The microstructure was analyzed by scanning electron microscopy. The addition of manganese oxide caused an improvement of the mechanical strength in relation to the material without additive and promoting the stabilization of β-TCP to greater temperatures

Fontes e disponibilidade de cálcio e fósforo para a tartaruga-da-amazônia - Podocnemis expansa criada em cativeiro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)