Comportamento de bugios (Alouatta clamitans Cabrera, 1940) na Ilha Grande, RJ

Alouatta clamitans é uma espécie endêmica da Mata Atlântica, bioma que vem sendo continuamente reduzido, o que torna de extrema urgência o conhecimento sobre a espécie. No Estado do Rio de Janeiro, sua área de ocorrência abrange a região da Ilha Grande, município de Angra dos Reis. A Ilha Grande possui uma extensa área de preservação, o Parque Estadual da Ilha Grande, que atua na conservação de cerca de 62,5% da sua extensão. O isolamento das espécies em ilhas pode provocar o desenvolvimento de características morfológicas e comportamentais diferentes das espécies do continente. No entanto, não existem trabalhos sistematizados sobre a ecologia e o comportamento da espécie no local. Este estudo objetivou analisar aspectos do comportamento de Alouatta clamitans na Ilha Grande, contribuindo para uma melhor compreensão sobre a biologia da espécie. Durante nove meses foram registrados dados de composição social e comportamento de grupos da espécie através da amostragem por varredura instantânea e todas as ocorrências. Observou-se que o tamanho médio dos grupos foi de cinco indivíduos e a composição social por grupo foi representada por um a dois machos adultos, uma a três fêmeas adultas e imaturos de diferentes classes etárias, com predominância de grupos unimacho. Em média, os grupos eram compostos por 22% de machos adultos, 38% de fêmeas adultas, 4% de machos subadultos, 27% de juvenis e 9% de infantes. O comportamento mais observado foi o repouso (45,2%), seguido da alimentação (28%), movimentação (21,7%) e comportamento social (5,1%), e dentre os comportamentos sociais, o mais exibido foi a vocalização (45,8%), seguido dos comportamentos de catação (33,7%), agonístico (7,9%), brincadeira (5,8%), marcação (4,2%) e comportamento sexual (2,6%). Não foram encontradas diferenças estatisticamente significativas nestas atividades entre os períodos seco e chuvoso. As vocalizações foram predominantemente emitidas por machos e adultos e estiveram relacionadas ao encontro de grupos. O comportamento de catação teve as fêmeas adultas como principais iniciadoras e os machos adultos, principais receptores, sendo realizado durante o comportamento de repouso, após a cópula, após e durante encontro de grupos e após perseguições. Os comportamentos agonísticos tiveram relação com o encontro de grupos em 40% dos registros e em 33,3% destes ocorreu entre fêmeas e pareceu estar associado à disputa por alimento e espaço, mas não houve registros de agressão física. O comportamento de marcação envolveu a utilização da garganta e das costas e esteve relacionado com encontros inter-grupais e com a ocorrência de chuvas. Cinco cópulas foram registradas no período de estudo nos meses de setembro, outubro e fevereiro e tiveram duração menor que um minuto. Nos encontros com primatas de outras espécies, os bugios pareceram neutros em relação aos estímulos. Os dados obtidos sobre a composição dos grupos, padrão de atividades e comportamentos sociais observados na Ilha Grande, de maneira geral, mostraram-se semelhantes aos resultados obtidos em outros trabalhos sobre a espécie e o gênero, de maneira que podemos concluir que os grupos, mesmo residentes em ilha, não demonstraram modificações comportamentais significativas que possam diferenciar-lhes de populações estudadas no continente.

AMO: Ateliê Móvel Oficial

Este texto é uma fabulação que cumpre papel de revelar um processo de trabalho em arte ao longo de dois anos. Trata-se de um percurso teórico-poético percorrido a partir da descoberta/invenção de um ateliê de criação em meio a minha residência. Um quadrado de 2x2 metros demarcado por sobreposição = fita amarela. Instaurado em divergentes contextos paisagísticos = casa, quarto de hotel, estúdio de dança, galeria de arte, palco, cidade. Trata de habitar os mesmos friccionando esfera de vivência pessoal e sítio específico de acontecimento. No texto, tem lugar reflexões pessoais a partir do trabalho, articulada a outros artistas (como Lygia Clark, Angel e Klauss Vianna, Antonin Artaud, Yves Klein, Min Tanaka, Tadashi Endo) e teóricos (dentre eles Hannah Arendt e Michel Foucault), compondo diferentes tons de fala produzidos ao longo desse período de trabalho

Comportamento tribocorrosivo do aço inoxidável e de ligas de titânio em meio salino

No presente trabalho, foram realizados ensaios de tribocorrosão no aço inoxidável AISI 304L, no titânio comercialmente puro (CPTi) e na liga de titânio Ti6Al4V em solução aquosa de 0,90% m/v NaCl. Amostras de ligas de titânio com tratamento térmico superficial de refusão a laser também foram utilizadas. Um tribômetro do tipo pino-no-disco com contracorpo de alumina foi usado. Técnicas eletroquímicas in situ de monitoramento em circuito aberto, espectroscopia de impedância eletroquímica, curvas de polarização e amperimetria de resistência nula foram empregadas. Os resultados obtidos indicam que o desgaste tribocorrosivo das ligas de titânio é mais intenso do que o observado no aço inoxidável, apresentando perfis de superfície mais irregulares. A análise da impedância eletroquímica mostrou que todos os materiais utilizados apresentam uma rápida recuperação da camada passiva, exibindo módulos e fases um pouco menores do que os medidos antes do desgaste. Sob atrito, os diagramas de impedância apresentam uma forte redução do módulo. Sob desgaste, o expoente α do elemento de fase constante (CPE) atinge seu valor mais baixo, enquanto o parâmetro γ é máximo. As curvas de polarização exibem potenciais menores e densidades de corrente de corrosão maiores durante o desgaste. O tratamento de refusão a laser, embora mude a microestrutura e a dureza superficial das amostras, não indica uma mudança aparente nos parâmetros eletroquímicos sob tribocorrosão, bem como do coeficiente de atrito. Nos ensaios de amperimetria de resistência nula, foi possível estimar a corrente mensurada no ARN por meio do emprego de um circuito elétrico equivalente. A densidade espectral de potência dos sinais de potencial e de corrente exibe a frequência de rotação (1,25 Hz) e seus harmônicos. Para baixas frequências (abaixo de 10 mHz), o decaimento obedece à relação 1 ⁄ e 1⁄ para os sinais de potencial e corrente, respectivamente.

Diurnal changes of behavior and respiration of Yangtze finless porpoises (Neophocaena phocaenoides asiaeorientalis) in captivity

A preliminary study was carried out to investigate diurnal changes of behavior of three, one adult mate, one adult female, and one juvenile female, Yangtze finless porpoises (Neophocaena phocaenoides asiaeorientalis) in captivity. The respiration and behavior of the porpoises were recorded for 222 hr across 42 days. Behavioral data were recorded for eight general categories: aerial display and fast swimming, begging for fish, playing, nonsexual socializing, sexual behavior, resting, rubbing, and miscellaneous (i.e., other behaviors not included in the above categories). Each behavioral category was scored using one-zero sampling with 10-min intervals. The adult male showed shorter mean respiratory intervals at night (19:00-7:00 h), whereas the mean respiratory intervals of the females were shorter during the day (7:00-19:00 h). Begging for fish of all individuals, playing of the juvenile female, nonsexual socializing, and miscellaneous behavior of the adult female and resting of the male were observed more easily in the day, and aerial display and fast swimming of the adults and resting of the females were observed more easily at night. No significant diurnal difference was found, however, in the remaining categories of each individual. Each of the three porpoises therefore showed a distinct diurnal pattern, but none was obviously more active in the daytime than during the nighttime. Results suggest that daytime-only feeding schedules may be insufficient to meet the energetic needs of marine mammals that show a 24-hr activity cycle, and that nighttime feeding may be a worthwhile addition to husbandry routines.

Links between energy dissipation and wear mechanisms in solid epoxy/epoxy sliding contact

This paper covers wear and energy dissipation of solid epoxy induced by the alternative rubbing between two samples of identical thermosetting polymer. Varying normal load, sliding velocity and sliding distance, the authors were able to define and discuss wear and friction laws and associated energy dissipation. Moreover, traces of several wear mechanisms were distinguished on the worn surfaces and associated with applied conditions. Observed under higher velocity, polymer softening and local state transition were explained by surface temperature estimate and confirmed by infra-red spectroscopy measurements. To conclude this study, all observed phenomena are classified into two wear scenarios according to sliding velocity. © 2014 Elsevier Ltd.

Phase transition behavior and molecular orientation of oligo(9,9 '-dioctylfluorene-alt-bithiophene)

A novel conjugated oligomer, oligo(9,9'-dioctylfluorene-alt-bithiophene) (OF8T2), was found to exhibit a unique phase transition between crystalline and liquid-crystalline states, and a liquid-crystalline glass was easily generated, offering better TFT device performance. In thin films, upon annealing the OF8T2 molecules oriented preferentially with their planes of conjugation being normal to the substrate, and both film thickness and annealing temperature were critical to the film morphology and the molecular orientation. When the OF8T2 film was deposited on a rubbed polyimide surface and annealed, the molecules aligned their long axes along the rubbing direction.

Understanding and Modeling the Behavior of a Harmonic Drive Gear Transmission

In my research, I have performed an extensive experimental investigation of harmonic-drive properties such as stiffness, friction, and kinematic error. From my experimental results, I have found that these properties can be sharply non-linear and highly dependent on operating conditions. Due to the complex interaction of these poorly behaved transmission properties, dynamic response measurements showed surprisingly agitated behavior, especially around system resonance. Theoretical models developed to mimic the observed response illustrated that non-linear frictional effects cannot be ignored in any accurate harmonic-drive representation. Additionally, if behavior around system resonance must be replicated, kinematic error and transmission compliance as well as frictional dissipation from gear-tooth rubbing must all be incorporated into the model.

Nociception or pain in a decapod crustacean?

Nociception is the ability to perceive a noxious stimulus and react in a re flexive manner and occurs across a wide range of taxa. However, the ability to experience the associated aversive sensation and feeling, known as pain, is not widely accepted to occur in nonvertebrates. We examined the responses of a decapod crustacean, the prawn, Palaemon elegans, to different noxious stimuli applied to one antenna to assess reflex responses (nociception) and longer-term, specifically directed behavioural responses that might indicate pain. We also examined the effects of benzocaine, a local anaesthetic, on these responses. Noxious stimuli elicited an immediate reflex tail flick response, followed by two prolonged activities, grooming of the antenna and rubbing of the antenna against the side of the tank, with both activities directed specifically at the treated antenna. These responses were inhibited by benzocaine; however, benzocaine did not alter general swimming activity and thus the decline in grooming and rubbing is not due to general anaesthesia. Mechanical stimulation by pinching also resulted in prolonged rubbing, but this was not inhibited by benzocaine. These results indicate an awareness of the location of the noxious stimuli, and the prolonged complex responses indicate a central involvement in their organization. The inhibition by a local anaesthetic is similar to observations on vertebrates and is consistent with the idea that these crustaceans can experience pain.

Pain and suffering in invertebrates?

All animals face hazards that cause tissue damage and most have nociceptive reflex responses that protect them from such damage. However, some taxa have also evolved the capacity for pain experience, presumably to enhance longterm protection through behavior modification based on memory of the unpleasant nature of pain. In this article I review various criteria that might distinguish nociception from pain. Because nociceptors are so taxonomically widespread, simply demonstrating their presence is not sufficient. Furthermore, investigation of the central nervous system provides limited clues about the potential to experience pain. Opioids and other analgesics might indicate a central modulation of responses but often peripheral effects could explain the analgesia; thus reduction of responses by analgesics and opioids does not allow clear discrimination between nociception and pain. Physiological changes in response to noxious stimuli or the threat of a noxious stimulus might prove useful but, to date, application to invertebrates is limited. Behavior of the organism provides the greatest insights. Rapid avoidance learning and prolonged memory indicate central processing rather than simple reflex and are consistent with the experience of pain. Complex, prolonged grooming or rubbing may demonstrate an awareness of the specific site of stimulus application. Tradeoffs with other motivational systems indicate central processing, and an ability to use complex information suggests sufficient cognitive ability for the animal to have a fitness benefit from a pain experience. Available data are consistent with the idea of pain in some invertebrates and go beyond the idea of just nociception but are not definitive. In the absence of conclusive data, more humane care for invertebrates is suggested.

Neonatal facial and cry responses to invasive and non-invasive procedures

Evaluation of pain in neonates is difficult due to their limited means of communication. The aim was to determine whether behavioural reactions of cry and facial activity provoked by an invasive procedure could be discriminated from responses to non-invasive tactile events. Thirty-six healthy full-term infants (mean age 2.2 h) received 3 procedures in counterbalanced order: intramuscular injection, application of triple dye to the umbilical stub, and rubbing thigh with alcohol. Significant effects of procedure were found for total face activity and latency to face movement. A cluster of facial actions comprised of brow bulging, eyes squeezed shut, deepening of the naso-labial furrow and open mouth was associated most frequently with the invasive procedure. Comparisons between the 2 non-invasive procedures showed more facial activity to thigh swabbing and least to application of triple dye to the umbilical cord. Acoustic analysis of cry showed statistically significant differences across procedures only for latency to cry and cry duration for the group as a whole. However, babies who cried to two procedures showed higher pitch and greater intensity to the injection. There were no significant differences in melody, dysphonation, or jitter. Methodological difficulties for investigators in this area were examined, including criteria for the selection of cries for analysis, and the logical and statistical challenges of contrasting cries induced by different conditions when some babies do not always cry. It was concluded that facial expression, in combination with short latency to onset of cry and long duration of first cry cycle typifies reaction to acute invasive procedures.

Influence of Interface Surface Geometries In The Tensile Characteristics Of Friction Welded Joints From Aluminium Alloys

Friction welding is a solid state joining process that produces coalescence in materials, using the heat developed between surfaces through a combination of mechanical induced rubbing motion and applied load. In rotary friction welding technique heat is generated by the conversion of mechanical energy into thermal energy at the interface of the work pieces during rotation under pressure. Traditionally friction welding is carried out on a dedicated machine because of its adaptability to mass production. In the present work, steps were made to modify a conventional lathe to rotary friction welding set up to obtain friction welding with different interface surface geometries at two different speeds and to carry out tensile characteristic studies. The surface geometries welded include flat-flat, flat-tapered, tapered-tapered, concave-convex and convex-convex. A comparison of maximum load, breaking load and percentage elongation of different welded geometries has been realized through this project. The maximum load and breaking load were found to be highest for weld formed between rotating flat and stationary tapered at 500RPM and the values were 19.219kN and 14.28 kN respectively. The percentage elongation was found to be highest for weld formed between rotating flat and stationary flat at 500RPM and the value was 21.4%. Hence from the studies it is cleared that process parameter like “interfacing surface geometries” of weld specimens have strong influence on tensile characteristics of friction welded joints

Adult attachment orientation and implicit behavioral mimicry

We investigated whether adult attachment orientation predicted the extent to which individuals engaged in implicit behavioral mimicry of a confederate presented by video. Results demonstrated that following an attachment threat prime: (1) those low in attachment anxiety and high in attachment avoidance showed less mimicry of face-rubbing gestures than individuals low in both attachment avoidance and attachment anxiety; (2) those high in attachment anxiety and low in attachment avoidance showed less mimicry of face-rubbing gestures than individuals low in both attachment avoidance and attachment anxiety. Importantly, attachment orientation did not predict baseline levels of face-rubbing gesturing; demonstrating that attachment orientation had an effect on mimicry rather than overall behavior expression. Attachment anxiety was positively related to attraction to the confederate such that those higher in attachment anxiety rated the confederate as more attractive. The findings are discussed with reference to both the mimicry and attachment literatures.

An investigation on sliding wear behavior of PVD coatings

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Scent-marking behaviour in free-ranging golden-faced saki monkeys, Pithecia pithecia chrysocephala: Sex differences and context

Scent-marking behaviour of golden-faced saki monkey, Pithecia pithecia chrysocephala, was observed intermittently between 1987 and 1990 for a family group in a Central Amazonian forest fragment. of 95 scent-marking events (during 275.5 hours of observation), throat-and-chest rubbing accounted for all except one anogenital rubbing. Nine of the throat-and-chest markings also involved touching groin with hands and eight markings (including the anogenital), urinating on the marked branch. Marking behaviour is strongly sex related, with the adult male making 88.4% of the markings. Scent-marking frequency by the adult male increased during breeding periods. Scent-marking behaviour seems related to courtship, and possibly stimulates sexual behaviour. All regularly marked spots consisted of horizontal branches on commonly travelled routes. Eleven occurred in feeding trees and lianas, but none in sleeping trees. Scent-marking behaviour in the monkeys studied here was not related to intergroup encounters and probably did not have a territorial function, although it may do so where different groups interact.

Competition between anchoring and reversible photo-induced alignment of a nematic liquid crystal

We investigated the alignment induced on a nematic liquid crystal (LC) by a photo-aligned polymer film with azo-dye side groups. The orientation of the LC molecules can be manipulated in a reversible manner by irradiating the film with polarized light. We analyzed the competition between the orientation induced by the main chain, through rubbing of the film and that induced by the photo-aligned polymer. Anchoring strength for the different processing conditions are reported. The changes in film morphology caused by rubbing or photo-alignment could be captured by atomic force microscopy. The reversibility of the photo-induced alignment and the competition between the two anchoring mechanisms may allow recording and erasing of information in a LC display.