931 resultados para transported semen
Resumo:
Ths report addresses the following two questions: 1) What are the loads (flux) of nutrients transported from the Mississippi-Atchafalaya River Basin to the Gulf of Mexico, and where do they come from within the basin? 2) What is the relative importance of specific human activities, such as agriculture, point-source discharges, and atmospheric deposition in contributing to these loads? These questions were addressed by first estimating the flux of nutrients from the Mississippi-Atchafalaya River Basin and about 50 interior basins in the Mississippi River system using measured historical streamflow and water quality data. Annual nutrient inputs and outputs to each basin were estimated using data from the National Agricultural Statistics Service, National Atmospheric Deposition Program, and point-source data provided by the USEPA. Next, a nitrogen mass balance was developed using agricultural statistics, estimates of nutrient cycling in agricultural systems, and a geographic information system. Finally, multiple regression models were developed to estimate the relative contributions of the major input sources to the flux of nitrogen and phosphorus to the Gulf of Mexico.
Resumo:
We have studied the reproductive biology of the goldlined seabream (Rhabdosargus sarba) in the lower Swan River Estuary in Western Australia, focusing particularly on elucidating the factors influencing the duration, timing, and frequency of spawning and on determining potential annual fecundity. Our results demonstrate that 1) Rhabdosargus sarba has indeterminate fecundity, 2) oocyte hydration commences soon after dusk (ca. 18:30 h) and is complete by ca. 01:30−04:30 h and 3) fish with ovaries containing migratory nucleus oocytes, hydrated oocytes, or postovulatory follicles were caught between July and November. However, in July and August, their prevalence was low, whereas that of fish with ovaries containing substantial numbers of atretic yolk granule oocytes was high. Thus, spawning activity did not start to peak until September (early spring), when salinities were rising markedly from their winter minima. The prevalence of spawning was positively correlated with tidal height and was greatest on days when the tide changed from flood to ebb at ca. 06:00 h, i.e., just after spawning had ceased. Because our estimate of the average daily prevalence of spawning by females during the spawning season (July to November) was 36.5%, individual females were estimated to spawn, on average, at intervals of about 2.7 days and thus about 45 times during that period. Therefore, because female R. sarba with total lengths of 180, 220, and 260 mm were estimated to have batch fecundities of about 4500, 7700, and 12,400 eggs, respectively, they had potential annual fecundities of about 204,300, 346,100 and 557,500 eggs, respectively. Because spawning occurs just prior to strong ebb tides, the eggs of R. sarba are likely to be transported out of the estuary into coastal waters where salinities remain at ca. 35‰. Such downstream transport would account for the fact that, although R. sarba exhibits substantial spawning activity in the lower Swan River Estuary, few of its early juveniles are recruited into the nearshore shallow waters of this estuary.
Resumo:
Each spring horseshoe crabs (Limulus polyphemus L.) emerge from Delaware Bay to spawn and deposit their eggs on the foreshore of sandy beaches (Shuster and Botton, 1985; Smith et al., 2002a). From mid-May to early June, migratory shorebirds stopover in Delaware Bay and forage heavily on horseshoe crab eggs that have been transported up onto the beach (Botton et al., 1994; Burger et al., 1997; Tsipoura and Burger, 1999). Thus, estimating the quantity of horseshoe crab eggs in Delaware Bay beaches can be useful for monitoring spawning activity and assessing the amount of forage available to migratory shorebirds.
Resumo:
Lengths and ages of sword-fish (Xiphias gladius) estimated from increments on otoliths of larvae collected in the Caribbean Sea, Florida Straits, and off the southeastern United States, indicated two growth phases. Larvae complete yolk and oil globule absorption 5 to 6 days after hatching (DAH). Larvae <13 mm preserved standard length (PSL) grow slowly (~0.3 mm/d); larvae from 13 to 115 mm PSL grow rapidly (~6 mm/d). The acceleration in growth rate at 13 days follows an abrupt (within 3 days) change in diet, and in jaw and alimentary canal structure. The diet of swordfish larvae is limited. Larvae <8 mm PSL from the Caribbean, Gulf of Mexico, and off the southeastern United States eat exclusively copepods, primarily of one genus, Corycaeus. Larvae 9 to 11 mm eat copepods and chaetognaths; larvae >11 mm eat exclusively neustonic fish larvae. This diet indicates that young larvae <11 mm occupy the near-surface pelagia, whereas, older and longer larvae are neustonic. Spawning dates for larvae collected in various regions of the western North Atlantic, along with the abundance and spatial distribution of the youngest larvae, indicate that spawning peaks in three seasons and in five regions. Swordfish spawn in the Caribbean Sea, or possibly to the east, in winter, and in the western Gulf of Mexico in spring. Elsewhere swordfish spawn year-round, but spawning peaks in the spring in the north-central Gulf of Mexico, in the summer off southern Florida, and in the spring and early summer off the southeastern United States. The western Gulf Stream frontal zone is the focus of spawning off the southeastern coast of the United States, whereas spawning in the Gulf of Mexico seems to be focused in the vicinity of the Gulf Loop Current. Larvae may use the Gulf of Mexico and the outer continental shelf off the east coast of the United States as nursery areas. Some larvae may be transported northward, but trans-Atlantic transport of larvae is unlikely.
Resumo:
EXTRACT (SEE PDF FOR FULL ABSTRACT): We used the diet of a seabird, the common murre (Uria aalge), nesting on Southeast Farallon Island and feeding in the Gulf of the Farallones, California, as an index to abundance of juvenile rockfish, then related fish abundance to indices of turbulence and upwelling over an 18-year period, 1973-1990. Strong, persistent upwelling or downwelling led to reduced availability of fish in the study area, in contrast to great abundance when upwelling was mild or pulsed. ... On the basis of our study, one effect might be that fishes thought strong enough to resist Ekman transport could be transported out of normal areas of recruitment.
Resumo:
It has been observed that a better frozen product can be obtained by freezing good quality pomfrets transported in insulated containers with sufficient quantity of ice. To enhance the keeping quality and to prevent dehydration and discoloration, a dip in B H A (0.005%) for 15 minutes and subsequent storage in polythene lined gunny bag at -15°c to -I8°c can be recommended. The products treated in the above manner can be stored well over six months. Periodical glazing at an interval of 3 weeks will also prevent the dehydration to a greater extent.
Resumo:
The paper deals with certain technological aspects of transportation of fish. Frozen fish packed in thermocole insulated plywood box (tea chests) and transported has been found to remain in good condition, for 3 to 4 days. Fish reaching the destination in a thawed state can be stored in crushed ice for a further period of 2-3 days. The effect of initial temperature of frozen fish on the storage life, the maximum storage period for different types of frozen fish packed in the insulated container and the changes in chemical and organoleptic qualities of different varieties of fish under condition of transport are also discussed.
Resumo:
Several small scleractinian coral colonies were collected from a remote reef and transferred [to] the Louisiana Universities Marine Center (LUMCON) for in vitro reproductive and larval studies. The species used here were Porites astreoides and Diploria strigosa. Colony size was ~20 cm in diameter. Colonies were brought to the surface by liftbag and stored in modified ice coolers. They were transported from Freeport, TX to Cocodrie, LA by truck for nearly 15 hours where field conditions were simulated in waiting aquaria. This document describes the techniques and equipment that were used, how to outfit such aquaria, proper handling techniques for coral colonies, and several eventualities that the mariculturist should be prepared for in undertaking this endeavor. It will hopefully prevent many mistakes from being made.
Resumo:
This paper presents a SPICE model of the SuperJunction Insulated Gate Bipolar Transistor (SJIGBT) [1]. SPICE simulation results are in good agreement with the DESSIS simulation results under DC conditions. This model consists of an intrinsic MOSFET and a parallel combination of a wide and a narrow base pnp BJTs. A parasitic JFET is also included to account for the restricted current flow between two adjacent p-wells. In addition the JFET component also models the additional depletion region caused by the transverse junction at the upper side of the n-drift region where the current is mainly transported via majority carriers.
Resumo:
This paper describes a method of improving the cooling of the hub region of high-pressure turbine (HPT) rotor by making better use of the unsteady coolant flows originating from the upstream vane. The study was performed computationally on an engine HPT stage with representative inlet hot streak and vane coolant conditions. An experimental validation study of hot streak migration was undertaken on two low-speed test facilities. The unsteady mechanisms that transport hot and cold fluid within the rotor hub region are first examined. It was found that vortex-blade interaction dominated the unsteady transport of hot and cold fluid in the rotor hub region. This resulted in the transport of hot fluid onto the rotor hub and pressure surface, causing a peak in the surface gas temperatures. The vane film coolant was found to have only a limited effect in cooling this region. A new cooling configuration was thus examined which exploits the unsteadiness in rotor hub to aid transport of coolant towards regions of high rotor surface temperatures. The new coolant was introduced from a slot upstream of the vane. This resulted in the feed of slot coolant at a different phase and location relative to the vane film coolant within the rotor. The slot coolant was entrained into the unsteady rotor secondary flows and transported towards the rotor hub-pressure surface region. The slot coolant reduced the peak time-averaged rotor temperatures by a similar amount as the vane film coolant despite having only a sixth of the coolant mass flow. Copyright © 2008 by ASME.
Resumo:
The fluid dynamic operation of a valveless pulse combustor has been studied experimentally and numerically. Through phase-locked chemiluminescence and pressure measurements it is shown that mechanical energy is created periodically in the flame surface, with an efficiency of 1.6%. This mechanical energy leaves the pulse combustor through unsteady jets at the aerovalve inlet and the tailpipe exit stations. Two thermodynamically distinct flows are identified: a flow that is transported from inlet to exit and participates in combustion along the way, and a flow that is ingested and then ejected from the combustor without undergoing combustion. It is the latter of these two flows which has the greatest quantity of net work done on it. Copyright © 2008 by the American Institute of Aeronautics and Astronautics, Inc.
Resumo:
A comparative study of the insulation efficiencies of expanded polystyrene slabs and multi-layer gunny fabric in long distance transportation of fresh iced fish was made. Used plywood boxes (second hand tea chests) were employed as containers and the experiments conducted between Kakinada and Calcutta. All the three insulants tried, namely, 25.4 mm thick expanded polystyrene slab, four and two layer gunny (jute) fabric, all sealed in 150 gauge polythene sheets, showed comparable insulation efficiencies, considering total bacterial counts, organoleptic qualities and TMA and TVN values of the transported fish as parameters.
Resumo:
Carp seed traders in Bangladesh are considered as one of the poorest, most vulnerable and least studied sub-population. Millions of fingerlings are transported annually to various parts of the country using bus tops and/or truck-beds in open and hand agitated method by the traders and as a result they encounter mass seed mortality. They are the key players in augmenting aquaculture activities by distributing fish fry and fingerlings to the fish farmers. Assessment of the seed sources and the livelihood of the traders are important to identify their point of entry to the aquaculture sector and further improvement. Status of household asset, income profiles, and risks involved were examined using DFID's sustainable livelihood approach (SLA) framework. Tools used to collect data included group discussions (GD), semi-structured and structured household (HH) survey. Samples (n=637) were randomly drawn purposefully from 10% of the carp seed traders within 11 districts. Sampled HH were classified into six land classes.
Resumo:
The study was conducted on the present status of HACCP based quality management system of golda, Macrobrachium rosenbergii farms in Fulpur region of Mymensingh. Information was collected on general condition of farms, culture systems and post-harvest quality management. In almost all farms, there is no or inadequate infrastructure facilities such as, road access, electric supply, telecommunications, ice, feed storage facility, vehicle for golda transportation, washing and toilet facilities. The problems associated with sanitation and hygiene was: widespread use of cow dung, poultry manure and construction of open toilet within the vicinity of prawn culture pond. Different grades of commercially available and locally prepared feeds were used for golda culture in the pond. Golda post-larvae (PL) of 40-50 days old were stocked with carp species. The price of golda PL ranged from Tk. 1.00 to Tk. 1.25/piece. The pond size varied from 50 decimal (0.2 ha) to 2.5 acre (1.0 ha) with an average depth of 2-2.5 m. The culture period of golda varied from April-May to November-December and survival rate ranged between 75 and 80%. Production of golda varied from 250-500 kg/acre (625-1,250 kg/ha). Harvested golda were transported to city market within 4 h. Two size grading were generally followed during pricing, e.g. Tk. 500 to 550/kg for >100 g size and Tk. 300/kg for <100 g size. The cost-benefit ratio was found to remain around 1:1.25 depending on availability of PL. Water quality parameters such as, water temperature, pH, dissolved oxygen, total alkalinity and chlorophyll a in five golda farms in Fulpur region were monitored. Water temperature ranged from 29°C to 33°C, dissolved oxygen from 2.28 to 4.13 mg/l, pH between 6.65 and 7.94, alkalinity from 44 to 70 mg/l and chlorophyll a concentration from 61.88 to 102.34 µg/l in the five investigated ponds. The Aerobic Plate Count (APC) of the water sample was within the range of 2.0x10^6 - 2.96x10^7 CFU/ml and of soil samples within the range of 6.9x10^6 - 7.73x10^6 CFU/g. Streptococcus sp., Bacillus sp., Escherichia coli, Staphylococcus sp., Pseudomonas sp. and Salmonella sp. were isolated from pond water and sediment. Different feed samples used for golda was analyzed for proximate composition. Moisture content ranged around 14.14-21.22%, crude protein 20.55-44.1%, lipid 4.67-12.54% and ash 9.7-27.69%. The TVB-N values and peroxide values of feeds used as starter, grower and fish meal were found within the acceptable ranges and samples were free from pathogenic organisms. A training was organized for the golda farmers on HACCP, water quality and post-harvest quality management of prawn.
Resumo:
Iced seer fish (Scomberomorus sp.) was transported by rail in expanded polystyrene insulated plywood boxes from Kakinada to Calcutta in round and fillet forms. While both withstood the rigors of transportation squarely, the fillets fetched only half the price of round fish in the auction conducted at the Calcutta market.