Osteogenic differentiation of human mesenchymal stem cells in the absence of osteogenic supplements: a surface-roughness gradient study

The use of biomaterials to direct osteogenic differentiation of human mesenchymal stem cells (hMSCs) in the absence of osteogenic supplements is thought to be part of the next generation of orthopedic implants. We previously engineered surface-roughness gradients of average roughness (Ra) varying from the sub-micron to the micrometer range ( 0.5–4.7 lm), and mean distance between peaks (RSm) gradually varying from 214 lm to 33 lm. Here we have screened the ability of such surface-gradients of polycaprolactone to influence the expression of alkaline phosphatase (ALP), collagen type 1 (COL1) and mineralization by hMSCs cultured in dexamethasone (Dex)-deprived osteogenic induction medium (OIM) and in basal growth medium (BGM). Ra 1.53 lm/RSm 79 lm in Dex-deprived OI medium, and Ra 0.93 lm/RSm 135 lm in BGM consistently showed higher effectiveness at supporting the expression of the osteogenic markers ALP, COL1 and mineralization, compared to the tissue culture polystyrene (TCP) control in complete OIM. The superior effectiveness of specific surface-roughness revealed that this strategy may be used as a compelling alternative to soluble osteogenic inducers in orthopedic applications featuring the clinically relevant biodegradable polymer polycaprolactone.

Effect of chitosan-Aloe vera coating on postharvest quality of blueberry (Vaccinium corymbosum) fruit

The present study was carried out to evaluate the effect of chitosan-based edible coatings with Aloe vera extract on the postharvest blueberry fruit quality during storage at 5 °C. Firstly, A. vera fractions (pulp and liquid) were extracted from leaves and evaluated in terms of antifungal and antioxidant capacities. The choice of the most adequate chitosan and A. vera fraction concentrations to be incorporated in coating formulation was made based on the wettability of the corresponding coating solutions. Coatings with 0.5% (w/v) chitosan + 0.5% (w/v) glycerol + 0.1% (w/v) Tween 80 + 0.5% (v/v) A. vera liquid fraction presented the best characteristics to uniformly coat blueberry surface. Physico-chemical (i.e., titratable acidity, pH, weight loss) and microbiological analyses of coated blueberries (non-inoculated or artificially inoculated with Botrytis cinerea) were performed during 25 d. Microbiological growth and water loss levels were approximately reduced by 50% and 42%, respectively, in coated blueberries after 25 d compared to uncoated blueberries. After 15 d, weight loss values were 6.2% and 3.7% for uncoated and chitosanA. vera coated blueberries, respectively. Uncoated fruits presented mold contamination after 2 d of storage (2.0 ± 0.32 log CFU g1), whilst fruits with chitosan-based coatings with A. vera presented mold contamination only after 9 d of storage (1.3 ± 0.35 log CFU g1). Overall, coatings developed in this study extend blueberries shelf-life for about 5 d, demonstrating for the first time that the combination of chitosan and A. vera liquid fraction as edible coating materials has great potential in expanding the shelf-life of fruits.

Nanotechnological approaches using curcumin and Withania somnifera: neuroprotection and antimicrobial activities

Tese de Doutoramento em Biologia de Plantas

Enzymatic treatments to improve mechanical properties and surface hydrophobicity of jute fiber membranes

Fiber membranes prepared from jute fragments can be valuable, low cost, and renewable. They have broad application prospects in packing bags, geotextiles, filters, and composite reinforcements. Traditionally, chemical adhesives have been used to improve the properties of jute fiber membranes. A series of new laccase, laccase/mediator systems, and multi-enzyme synergisms were attempted. After the laccase treatment of jute fragments, the mechanical properties and surface hydrophobicity of the produced fiber membranes increased because of the cross-coupling of lignins with ether bonds mediated by laccase. The optimum conditions were a buffer pH of 4.5 and an incubation temperature of 60 °C with 0.92 U/mL laccase for 3 h. Laccase/guaiacol and laccase/alkali lignin treatments resulted in remarkable increases in the mechanical properties; in contrast, the laccase/2,2-azino-bis-(3-ethylthiazoline-6-sulfonate) (ABTS) and laccase/2,6-dimethoxyphenol treatments led to a decrease. The laccase/ guaiacol system was favorable to the surface hydrophobicity of jute fiber membranes. However, the laccase/alkali lignin system had the opposite effect. Xylanase/laccase and cellulase/laccase combined treatments were able to enhance both the mechanical properties and the surface hydrophobicity of jute fiber membranes. Among these, cellulase/laccase treatment performed better; compared to mechanical properties, the surface hydrophobicity of the jute fiber membranes showed only a slight increase after the enzymatic multi-step processes.

New approach on the bioconversion of vineyard pruning waste into surface-active compounds by Lactobacillus paracasei

Strategic funding of UID/BIO/04469/2013 unit and project ref RECI/BBB-EBI/0179/2012 (project number FCOMP-01-0124-FEDER-027462) and Xanel Vecino post-doctoral grant (ref SFRH/BPD/101476/2014) funded by Fundação para a Ciência e a Tecnologia, Portugal

Bacterial cellulose surface modification

The unique properties of bacterial nanocellulose (BNC) provide the basis for a wide range of applications in human and veterinary medicine, odontology, pharmaceuticals, acoustic and filter membranes, biotechnological devices, and in the food and paper industry. In this chapter, an overview of surface modifications of bacterial cellulose is presented. Depending on the envisaged applications, chemical modifications, incorporation of bioactive molecules, modification of the porosity, crystallinity, and biodegradability may be obtained, further enlarging the potential of BNC.

Surface phenomena and hydrodynamic effects on the deposition of Pseudomonas fluorescens

Biofilm adhesion to metals (copper, aluminium and brass) was studied at two different velocities and pH values of 7 and 9. Both bacteria and metals showed negative surface charges at those values of pH, which tends to slow down adhesion. Film densities increased with the fluid velocity and were also affected by the pH and by the growth rate of the bacteria. Long duration tests based on heat transfer measurements were run at five different fluid velocities and at pH = 7, showing in general an asymptotic behaviour and a control of deposition by adhesion and growth phenomena.

Botanical characters of the leaves of the date palm used in distinguishing cultivated varieties /

no.223 (1915)

Optimisation of a surface mount technology process using a SnAgCu lead-free alloy

The impending introduction of lead-free solder in the manufacture of electrical and electronic products has presented the electronics industry with many challenges. European manufacturers must transfer from a tin-lead process to a lead-free process by July 2006 as a result of the publication of two directives from the European Parliament. Tin-lead solders have been used for mechanical and electrical connections on printed circuit boards for over fifty years and considerable process knowledge has been accumulated. Extensive literature reviews were conducted on the topic and as a result it was found there are many implications to be considered with the introduction of lead-free solder. One particular question that requires answering is; can lead-free solder be used in existing manufacturing processes? The purpose of this research is to conduct a comparative study of a tin-lead solder and a lead-free solder in two key surface mount technology (SMT) processes. The two SMT processes in question were the stencil printing process and the reflow soldering process. Unreplicated fractional factorial experimental designs were used to carry out the studies. The quality of paste deposition in terms of height and volume were the characteristics of interest in the stencil printing process. The quality of solder joints produced in the reflow soldering experiment was assessed using x-ray and cross sectional analysis. This provided qualitative data that was then uniquely scored and weighted using a method developed during the research. Nested experimental design techniques were then used to analyse the resulting quantitative data. Predictive models were developed that allowed for the optimisation of both processes. Results from both experiments show that solder joints of comparable quality to those produced using tin-lead solder can be produced using lead-free solder in current SMT processes.

Changeability of Surface Ozone Concentration in Tbilisi in 1984-2010

მოყვანილია ქალაქ თბილისში 1984-დან 2010 წლებში მიწისპირა ოზონის კონცენტრაციის საშუალო ნახევარწლიური და წლიური მონაცემების დეტალური სტატისტიკური ანალიზის შედეგები.

Connection Between Surface Ozone Concentration and Visibility in Tbilisi

წარმოდგენილია მიწისპირა ოზონის საშუალოწლიური მონაცემების და სხვადასხვა ბალიანობის ხილვადობის სიშორის მქონე დღეების რიცხვს შორის კორელაციური და რეგრესიული კავშირის გამოკვლევის შედეგები 9, 12 და 15 საათზე დაკვირვებებისათვის.

Forearm surface EMG signals recognition and muscoloskeletal system dynamics identification using intelligent computational methods

Biosignals processing, Biological Nonlinear and time-varying systems identification, Electomyograph signals recognition, Pattern classification, Fuzzy logic and neural networks methods

3-D surface reconstruction using spatial frequency-based approaches under influence of perspective distortion

Magdeburg, Univ., Fak. für Elektrotechnik und Informationstechnik, Diss., 2008

Biologia da Arsenura xanthopus (Walker, 1855) ( Lepidoptera - Adelocephalidae ), praga do «Açoita-Cavalo» (Luehea spp.) e notas sôbre seus inimigos naturais

Biology of Arsenura xanthopus (Walker, 1855) (Lep., Adelocephalidae), a pest of Luehea spp. (Tiliaceae), and notes on its natural enemies. In the beginning of 1950, one of the Authors made some observations about the biology of Arsenura xanthopus (Walker), in Piracicaba, State of S. Paulo, Brazil. From 1951 to 1953, both Authors continued the observations on such an important Adelocephalidae, the caterpillars of which represent a serious pest of Luehea spp. leaves. Actually, in some occasions, the caterpillars can destroy completely the leaves of the trees. The species is efficientely controlled by two natural enemies: an egg parasite (Tetrastichus sp., Hym., Eulophidae) and a fly attacking the last instar caterpillar (Winthemia tricolor (van der Wulp), Dip., Tachinidae). Tetrastichus sp. can destroy 100% of the eggs and the fly, 70 to 100% of the caterpillars. Indeed, facts as such are very interesting because we rarely know of a case of so complete a control of a pest by an insect. A. xanthopus had not yet been mentioned in our literature. Actually neither the systematic bibliography nor the economic one has treated of this species. However, a few other species of Arsenura are already known as living on Luehea spp. According to the Authors' observations, W. tricolor was also unknown by the Brazilian entomological literature. Arsenura xanthopus (Walker, 1855) After giving the sinonimy and a few historical data concerning the species, and its geographical distribution, the Authors discuss its placing in the genus Arsenura Duncan or Rhescyntis Huebner, finishing by considering Arsenura xanthopus as a valid name. The Authors put the species in the family Adelocephalidae, as it has been made by several entomologists. The host plant The species of Tiliaceae plants belonging to the genus Luehea are called "açoita-cavalo" and are well known for the usefulness of their largely utilized wood. The genus comprises exclusively American plants, including about 25 species distributed throughout the Latin America. Luehea divaricata Mart, is the best known species and the most commonly cultivated. Biology of Arsenura xanthopus Our observations show that the species passes by 6 larval stages. Eggs and egg-postures, all the 6 instars of the caterpillars as well as the chrysalid are described. The pupal period is the longest of the cycle, taking from 146 to 256 days. Data on the eclosion and habits of the caterpillars are also presented. A redescription of the adult is also given. Our specimens agreed with BOUVIER's description, except in the dimension between the extremities of the extended wings, which is a little shorter (107 mm according to BOUVlErVs paper against from 80 to 100mm in our individuals). Winthemia tricolor (van der Wulp, 1890) Historical data, geographical distribution and host are first related. W. tricolor had as yet a single known host-; Ar^-senura armida (Cramer). This chapter also contains some observations on the biolcn gy of the fly and on its behaviour when trying to lay eggs on the caterpillars' skin. The female of W. tricolor lays from 1 to 33 eggs on the skin of the last instar caterpillar. The mam region of the body where the eggs are laid are the membranous legs. Eggs are also very numerous oh the ventral surface of the thorax and abdomen. The. preference for such regions is easily cleared up considering the position assumed by the caterpillar when fixed motionless in a branch. In such an occasion, the fly approaches, the victim, puts the ovipositor out and lays the eggs on different parts of the body, mainly on the mentioned regions, which are much more easily reached. The eggs of the fly are firmly attached to the host's skin, being almost impossible to detach them, without having them broken. The minute larvae of the fly enter the body of, the host when it transforms into chrysalid. Chrysalids recentely formed and collected in nature f requentely show a few small larvae walking on its skin and looking for an adequate place to get into the body. A few larvae die by remaining in the skin of the caterpillar which is pushed away to some distance by the active movements of the chrysalid recentely formed. From 1 to 10 larvae completely grown may emerge from the attacked chrysalid about 8 days after their penetrating into the caterpillars' body and soon begin to look for an adequate substratum where they can transform themselves into pupae. In natural conditions, the metamorphosis occurs in the soil. The flies appear within 15 days. Tetrastichus sp. This microhymenoptera is economically the most interesting parasite, being commonly able to destroy the whole pos^ ture of the moth. Indeed, some days after the beginning of the infestation of the trees, it is almost impossible to obtain postures completely free of parasites. The active wasp introduces the ovipositor into the egg of the moth, laying its egg inside, from 80 to 120 seconds after having introduced it. A single adult wasp emerges from each egg. Sarcophaga lambens Wiedemann, 1830 During the observations carried out, the Authors obtained 10 flies from a chysalid that were recognized as belonging to the species above. S. lambens is a widely distributed Sarcophagidae, having a long list of hosts. It is commonly obtained from weak or died invertebrates, having no importance as one of their natural enemies. Sinonimy, list of hosts and distribution are presented in this paper. Control of Arsenura xanthopus A test has been carefully made in the laboratory just to find out the best insecticide for controlling A. xanthopus caterpillars. Four different products were experimented (DDT, Pa-rathion, BHC and Fenatox), the best results having been obtained with DDT at 0,25%. However, the Authors believe in spite of the initial damages of the trees, that the application of an insecticide may be harmful by destroying the natural agents of control. A biological desiquilibrium may in this way take place. The introduction of the parasites studied (Tetrastichus sp. and Winthemia tricolor) seems to be the most desirable measure to fight A. xanthopus.

Nota preliminar sôbre a absorção e a translocação do radiozinco no cafeeiro [Coffea arabica] cultivado em solução nutritiva

Two water-culture experiments were carried out to study the absorption and the translocation of radiozinc in young coffee plants as influenced by two factors, namely, concentration of heavy metals (iron, manganese, copper and molybdenum) and method of application. Inert zinc was furnished at a uniform rate of 0.05 p.p.m.; the levels of iron supply were 0, 1.0 and 10 p.p.m.; manganese was supplied in three doses 0, 0.5, and 5 p.p.m.; copper - 0, 0.02, and 0.2 p.p.m.; molybdenum - 0, 0.01 and 0.1 p.p.m. When applied to the nutrient solution the activity of the radiozinc was 0.15 microcuries per plant. In the study of the leaf absorption, the radiozinc was supplied at the level of 0.10 microcuries per plant; in this case the material was brushed either on the lower or in the upper surface or both of two pairs of mature leaves. In both experiments the absorption period was 8 weeks. The following conclusions can be drawn: 1. Among the heavy metals herein investigated the iron concentration did not affecc the uptake of the radiozinc; by raising the level of Mn, Cu and Mo ten times, the absorption dropped to 50 per cent and even more whe compared with the control plant; however, when these micronutrients were omitted from the nutrient solution an increase in the uptake of zinc was registered only in the minus - Cu treatment. The effects of high leveds of Mn, Cu and Mo probably indicate an interionic competition for a same site on a common binding substance in the cell surface. 2. The absorption of the radiozinc directly applied to the leaf surface reached levels as high as 8 times that registered when the root uptake took place. Among the three methods of application which have been tried, brushing the lower surface of the leaves proved to be the most effective; this result is easily understood since the stomatal openings of the coffee leaves are preferentially located in the lower surface. In this treatment, about 40 per cent of the activity was absorbed and around 12 per cent were translocated either to the old or to the newer organs. 3. Data herein presented suggest that leaf sprays should be preferred - rather than soil applications - to control zinc deficiency in coffee plants when growing in field conditions.