Reappraisal of the effective elastic thickness for the sub-Andes using 3-D finite element flexural modelling, gravity and geological constraints

P>Estimates of effective elastic thickness (T(e)) for the western portion of the South American Plate using, independently, forward flexural modelling and coherence analysis, suggest different thermomechanical properties for the same continental lithosphere. We present a review of these T(e) estimates and carry out a critical reappraisal using a common methodology of 3-D finite element method to solve a differential equation for the bending of a thin elastic plate. The finite element flexural model incorporates lateral variations of T(e) and the Andes topography as the load. Three T(e) maps for the entire Andes were analysed: Stewart & Watts (1997), Tassara et al. (2007) and Perez-Gussinye et al. (2007). The predicted flexural deformation obtained for each T(e) map was compared with the depth to the base of the foreland basin sequence. Likewise, the gravity effect of flexurally induced crust-mantle deformation was compared with the observed Bouguer gravity. T(e) estimates using forward flexural modelling by Stewart & Watts (1997) better predict the geological and gravity data for most of the Andean system, particularly in the Central Andes, where T(e) ranges from greater than 70 km in the sub-Andes to less than 15 km under the Andes Cordillera. The misfit between the calculated and observed foreland basin subsidence and the gravity anomaly for the Maranon basin in Peru and the Bermejo basin in Argentina, regardless of the assumed T(e) map, may be due to a dynamic topography component associated with the shallow subduction of the Nazca Plate beneath the Andes at these latitudes.

Analysis of experimental interlocking blocks of concrete with addition of residues of process the tires retreading production

Analysis of experimental interlocking blocks of concrete with addition of residues of process the tires retreading production. With the population growth in recent years, industry in general has adjusted itself to resulting demand. the industry of tire retreading generates residues that have been discarded without any control. this adds to environmental pollution and promotes the proliferation of vectors harmful to health, aiming to find an application for this type of residues, this study presents experimental results to interlocking concrete block pavements, with addition of residues tires, interlocking blocks were built up and we determined, through laboratory tests, the need to set the mark that provide greater return regarding analyzed characteristics, there are four types of dosage of concrete with residues tires. We accomplished tests of compression strength, water absorption and resistance to impact. Through the preliminary results, we verified that are satisfactory, confirming the possibility of applying this type of interlocking block in environments with low demand, which would bring the economy of natural sources of aggregates, beyond ecological benefits through the reuse of residues from retreading of tires.

Monotone positive solutions for a fourth order equation with nonlinear boundary conditions

This work is concerned with the existence of monotone positive solutions for a class of beam equations with nonlinear boundary conditions. The results are obtained by using the monotone iteration method and they extend early works on beams with null boundary conditions. Numerical simulations are also presented. (C) 2009 Elsevier Ltd. All rights reserved.

The competing roles of extensional viscosity and normal stress differences in complex flows of elastic liquids

In various attempts to relate the behaviour of highly-elastic liquids in complex flows to their rheometrical behaviour, obvious candidates for study have been the variation of shear viscosity with shear rate, the two normal stress differences N(1) and N(2) especially N(1), and the extensional viscosity eta(E). In this paper, we shall be mainly interested in `constant-viscosity` Boger fluids, and, accordingly, we shall limit attention to N(1) and eta(E). We shall concentrate on two important flows - axisymmetric contraction flow and ""splashing"" (particularly that which arises when a liquid drop falls onto the free Surface of the same liquid). Modem numerical techniques are employed to provide the theoretical predictions. It is shown that the two obvious manifestations of viscoelastic rheometrical behaviour can sometimes be opposing influences in determining flow characteristics. Specifically, in an axisymmetric contraction flow, high eta(E) , can retard the flow, whereas high N(1) can have the opposite effect. In the splashing experiment, high eta(E) can certainly reduce the height of the so-called Worthington jet, thus confirming some early suggestions, but, again, other rheometrical influences can also have a role to play and the overall picture may not be as clear as it was once envisaged.

Influence of the halo upon angular distributions for elastic scattering and breakup

The angular distributions for elastic scattering and breakup of halo nuclei are analysed using a near-side/far-side decomposition within the framework of the dynamical eikonal approximation. This analysis is performed for (11)Be impinging on Pb at 69 MeV/nucleon. These distributions exhibit very similar features. In particular they are both near-side dominated, as expected from Coulomb-dominated reactions. The general shape of these distributions is sensitive mostly to the projectile-target interactions, but is also affected by the extension of the halo. This suggests the elastic scattering not to be affected by a loss of flux towards the breakup channel. (C) 2010 Elsevier B.V. All rights reserved.

Challenging measurement of the (16)O+(27)Al elastic and inelastic angular distributions up to large angles

The (16)O+(27)Al elastic and inelastic angular distributions have been measured in a broad angular range (13 degrees < theta(lab) < 52 degrees) at about 100 MeV incident energy. The use of the MAGNEX large acceptance magnetic spectrometer and of the ray-reconstruction analysis technique has been crucial in order to provide, in the same experiment, high-resolution energy spectra and cross-section measurements distributed over more than seven orders of magnitude down to hundreds of nb/sr. (C) 2011 Elsevier B.V. All rights reserved.

Effect on the heavy-ion fusion and elastic scattering cross sections of common approximations assumed in coupled-channel calculations

We study the effects of several approximations commonly used in coupled-channel analyses of fusion and elastic scattering cross sections. Our calculations are performed considering couplings to inelastic states in the context of the frozen approximation, which is equivalent to the coupled-channel formalism when dealing with small excitation energies. Our findings indicate that, in some cases, the effect of the approximations on the theoretical cross sections can be larger than the precision of the experimental data.

Study of (9)Be+(12)C elastic scattering at energies near the Coulomb barrier

In this work, angular distribution measurements for the elastic channel were performed for the (9)Be + (12)C reaction at the energies E(Lab) = 13.0, 14.5, 17.3, 19.0 and 21.0 MeV, near the Coulomb barrier. The data have been analyzed in the framework of the double folding Sao Paulo potential. The experimental elastic scattering angular distributions were well described by the optical potential at forward angles for all measured energies. However, for the three highest energies, an enhancement was observed for intermediate and backward angles. This can be explained by the elastic transfer mechanism. (C) 2011 Elsevier B.V. All rights reserved.

Elastic scattering of a proton-halo nucleus: (8)B+(58)Ni

The elastic channel of the (8)B + (58)Ni system has been measured at energies around the Coulomb barrier. An optical potential fi to the experimental angular distributions is obtained. The total reaction cross section consistent with the obtained potential is reported and possible deviations from normal behaviour are discussed.

Influence of super-ohmic dissipation on a disordered quantum critical point

We investigate the combined influence of quenched randomness and dissipation on a quantum critical point with O(N) order-parameter symmetry. Utilizing a strong-disorder renormalization group, we determine the critical behavior in one space dimension exactly. For super-ohmic dissipation, we find a Kosterlitz-Thouless type transition with conventional (power-law) dynamical scaling. The dynamical critical exponent depends on the spectral density of the dissipative baths. We also discuss the Griffiths singularities, and we determine observables.

Persuading the Public : A Linguistic Analysis of Barack Obama’s Speech on “Super Tuesday” 2008

This essay examines the persuasive side of language in a speech given by Senator Barack Obama on Super Tuesday in February 2008. It studies how Senator Obama utilizes language to convince and persuade his audience. This is done from an Aristotelian point of view, meaning that the study focuses foremost on how the senator’s word choices relate to Aristotle’s three means of persuasion, ethos, pathos and logos. Those basic guiding principles are relevant to use since Aristotle’s work on the subject of rhetoric is still today one of the most relevant works in that field. The analysis is basically performed through personal observations guided by previous studies, within the frame of Aristotelian rhetoric. The results show how Senator Obama enforces the three means of persuasion through language and how it can be considered persuasive. The study might add to rhetoric studies from a linguistic perspective since it reaches a better understanding of language used in the field of politics, where rhetoric is a prominent component.

Efeitos da variação da carga por eixo, pressão de inflação e tipo de pneu na resposta elástica de um pavimento

O presente trabalho é uma análise experimental que procura investigar os efeitos dos fatores carga por eixo, pressão de inflação e tipo de pneu sobre o desempenho de pavimentos. Os dados e informações existentes sobre o quadro de cargas por eixo praticada pela frota de veículos pesados é razoável. A ação conjunta dos referidos fatores é ainda uma questão pouco explorada. Assim, para compensar a escassez de dados sobre pressão de inflação e tipo de construção de pneus utilizados na frota de carga, programou-se uma pesquisa de campo na rodovia estadual RS/240. As informações oriundas da pesquisa demonstram que há um acréscimo generalizado no valor da pressão dos pneus e um aumento de uso dos pneus de fabricação radial em relação aos pneus convencionais. Os dados de campo subsidiaram a programação de um experimento fatorial cruzado executado na Área de Pesquisas e Testes de Pavimentos da UFRGS/DAER. A variação dos níveis dos fatores deu-se através de um simulador linear de tráfego atuando sobre uma pista experimental com 20 m de comprimento por 3,5 m de largura. Tendo como resposta estrutural do pavimento a máxima deflexão superficial recuperável medida com uma viga Benkelmam, determinou-se como significantes os efeitos dos fatores carga por eixo e pressão de enchimento dos pneus. Os cálculos estatísticos indicam também que não há diferenças significativas entre os pneus tipo 9.00R20 e 9.00x20 e que todas interações não exercem efeitos significativos sobre a variável de resposta. Em seqüência, determinaram-se as áreas de contato do rodado duplo do simulador de tráfego com a superfície do pavimento ensaiado para as combinações dos níveis dos fatores. Pode-se, então, comparar área de contato medida com área circular calculada, considerada em muitos modelos de dimensionamento de pavimentos. Relacionou-se a variação da pressão de contato com a deflexão recuperável e procedeu-se uma comparação da mesma com a pressão de inflação nominal dos pneus. Apresenta-se um modelo de análise do desempenho do pavimento em função da carga por eixo e da pressão de inflação, nos limites do experimento. Os dados decorrentes do experimento viabilizaram a determinação dos Fatores de Equivalência de Cargas para os níveis dos fatores, considerando-se o pavimento ensaiado. Avaliou-se, via evolução das deflexões e dos Fatores de Equivalência de Cargas, a redução da vida do pavimento, obtendo-se, para a combinação de níveis mais críticos de carregamento, resultados significativos de até 88 % de redução. Propõe-se, por último, uma formulação para o Fator de Equivalência de Cargas que considere também a ação da pressão de inflação.

Estudo, desenvolvimento e caracterização de revestimentos do tipo super-rede de dureza

Nos últimos 10 anos, o desenvolvimento de técnicas de deposição e seus equipamentos permitiu o surgimento de novos tipos de filmes finos, principalmente voltados para aplicações mecânicas e tribológicas, que são multicamadas nanoestruturadas. Esses revestimentos apresentam propriedades que não são diretamente ligadas as propriedades das camadas individuais de cada material, geralmente apresentando valores de dureza extremamente elevados relacionados a um período de modulação crítico ΛC. Esses filmes demonstram um claro potencial para aplicações tribológicas mesmo com o seu comportamento de dureza ainda não completamente esclarecido. O objetivo deste trabalho é produzir multicamadas nanoestruturadas do tipo metal / nitreto pela técnica de magnetron sputtering usando Nb, Ta e TiN, visando obter uma estrutura com valores de dureza extremamente elevados, tipicamente observados em revestimentos do tipo super-redes. A estrutura periódica dos revestimentos com baixo valor de Λ (< 10 nm) foi caracterizada por XRR (Refletividade por Difração de Raios X) e por RBS (Espectrometria por Retroespalhamento Rutherford) para os valores altos de Λ. As propriedades mecânicas dos revestimentos foram avaliadas por testes instrumentados de dureza usando um equipamento Fischerscope HV100. Todas as multicamadas foram produzidas com sucesso e apresentaram uma periodicidade bem definida, o que foi confirmado pelos resultados de RBS e XRR. Os valores de dureza medidos apresentaram um comportamento tipicamente observado em superredes com um valor máximo maior que 50 GPa sempre relacionado a uma valor crítico de Λ. O valor ΛC foi 8 nm para as amostras de Nb/TiN e 4 nm para as amostras de Ta/TiN. A razão H/E indicou que o revestimento nanoestruturado mais adequado para aplicações tribológicas foram as multicamadas com maior valor de dureza. Esses resultados mostraram claramente a possibilidade de aplicação industrial destes revestimentos.

Testing for super-exogeneity in the presence of common deterministic shifts

This paper introduces the concept of common deterministic shifts (CDS). This concept is simple, intuitive and relates to the common structure of shifts or policy interventions. We propose a Reduced Rank technique to investigate the presence of CDS. The proposed testing procedure has standard asymptotics and good small-sample properties. We further link the concept of CDS to that of superexogeneity. It is shown that CDS tests can be constructed which allow to test for super-exogeneity. The Monte Carlo evidence indicates that the CDS test for super-exogeneity dominates testing procedures proposed in the literature.