Molecular determination of oxytetracycline-resistant bacteria and their resistance genes from mariculture environments of China

Aims: To assess the diversity of antibiotic-resistant bacteria and their resistance genes in typical maricultural environments. Methods nand Results: Multidrug-resistant bacteria and resistance genes from a mariculture farm of China were analysed via cultivation and polymerase chain reaction (PCR) methods. Oxytetracycline (OTC)-resistant bacteria were abundant in both abalone and turbot rearing waters, accounting for 3.7% and 9.9% of the culturable microbes. Multidrug resistance was common, with simultaneous resistance to OTC, chloramphenicol and ampicillin the most common resistance phenotype. 16S rDNA sequence analyses indicate that the typical resistant isolates belonged to marine Vibrio, Pseudoalteromonas or Alteromonas species, with resistance most common in Vibrio splendidus isolates. For OTC resistance, tet(A), tet(B) and tet(M) genes were detected in some multidrug-resistant isolates, with tet(D) being the most common molecular determinant. For chloramphenicol resistance, cat II was common, and floR was also detected, especially in marine Pseudoalteromonas strains. Conclusions: There is the risk of multidrug-resistant bacteria contamination in mariculture environments and marine Vibrio and Pseudoalteromonas species serve as reservoirs of specific antibiotic resistance determinants. Significance and Impact of the Study: This paper and similar findings from Korea and Japan indicate the potential for widespread distribution of antibiotic resistance genes in mariculture environments from the East Asian region of the world.

Modern sedimentary environments and dynamic depositional systems in the southern Yellow Sea

Based on analyses of more than 600 surface sediment samples together with large amounts of previous sedimentologic and hydrologic data, the characteristics of modern sedimentary environments and dynamic depositional systems in the southern Yellow Sea (SYS) are expounded, and the controversial formation mechanism of muddy sediments is also discussed. The southern Yellow Sea shelf can be divided into low-energy sedimentary environment and high-energy sedimentary environment; the low-energy sedimentary environment can be further divided into cyclonic and anticyclonic ones, and the high-energy environment is subdivided into high-energy depositional and eroded environments. In the shelf low-energy environments, there developed muddy depositional system. In the central part of the southern Yellow Sea, there deposited the cold eddy sediments under the actions of a meso-scale cyclonic eddy (cold eddy), and in the southeast of the southern Yellow Sea, an anticyclonic eddy muddy depositional system (warm eddy sediment) was formed. These two types of sediments showed evident differences in grain size, sedimentation rate, sediment thickness and mineralogical characteristics. The high-energy environments were covered with sandy sediments on seabed; they appeared mainly in the west, south and northeast of the southern Yellow Sea. In the high-energy eroded environment, large amounts of sandstone gravels were distributed on seabed. In the high-energy depositional environment, the originally deposited fine materials (including clay and fine silt) were gradually re-suspended and then transported to a low-energy area to deposit again. In this paper, the sedimentation model of cyclonic and anticyclonic types of muddy sediments is established, and a systematic interpretation for the formation cause of muddy depositional systems in the southern Yellow Sea is given.

PCBs and its coupling with eco-environments in Southern Yellow Sea surface sediments

In this paper, the spatial distribution and source of the PCBs in surface sediments of the Southern Yellow Sea (SYS) and influencing factors, such as the sediment characteristics (components, relative proportions and total organic carbon contents), and hydrodynamic conditions were analyzed. PCB concentrations in the surface sediments ranged from 518-5848 pg/g, with average values of 1715 pg/g decreasing sharply compared to last year. In the study area, the PCB pollution level in the middle area was the highest, followed by that of the east coast and the west coast, respectively. Although the PCB level in the coastal areas was lower than that in the middle areas, it was proven in our study that the Yellow Sea obtained PCBs by virtue of river inputs. There was a positive and pertinent correlation between the clay proportion and PCB concentrations, and the increase of the PCB concentrations was directly proportional to the increase of TOC contents, with r = 0.61, but it was contrary to the sediment grain size. Consequently, the factors controlling PCB distribution had direct or indirect relationships with sediment grain size; moreover, the hydrodynamic conditions determined the sediment components and grain size. In conclusion, hydrodynamic conditions of the Yellow Sea were the most important influencing factors effecting the distribution of PCBs in the surface sediments of the SYS. (C) 2007 Elsevier Ltd. All rights reserved.

Learning World Models in Environments with Manifest Causal Structure

This thesis examines the problem of an autonomous agent learning a causal world model of its environment. Previous approaches to learning causal world models have concentrated on environments that are too "easy" (deterministic finite state machines) or too "hard" (containing much hidden state). We describe a new domain --- environments with manifest causal structure --- for learning. In such environments the agent has an abundance of perceptions of its environment. Specifically, it perceives almost all the relevant information it needs to understand the environment. Many environments of interest have manifest causal structure and we show that an agent can learn the manifest aspects of these environments quickly using straightforward learning techniques. We present a new algorithm to learn a rule-based causal world model from observations in the environment. The learning algorithm includes (1) a low level rule-learning algorithm that converges on a good set of specific rules, (2) a concept learning algorithm that learns concepts by finding completely correlated perceptions, and (3) an algorithm that learns general rules. In addition this thesis examines the problem of finding a good expert from a sequence of experts. Each expert has an "error rate"; we wish to find an expert with a low error rate. However, each expert's error rate and the distribution of error rates are unknown. A new expert-finding algorithm is presented and an upper bound on the expected error rate of the expert is derived.

Evaluating the development of virtual learning environments in higher and further education

Urquhart, C., Spink, S., Thomas, R., Yeoman, A., Durbin, J., Turner, J., Fenton, R. & Armstrong, C. (2004). Evaluating the development of virtual learning environments in higher and further education. In J. Cook (Ed.), Blue skies and pragmatism: learning technologies for the next decade. Research proceedings of the 11th Association for Learning Technology conference (ALT-C 2004), 14-16 September 2004, University of Exeter, Devon, England (pp. 157-169). Oxford: Association for Learning Technology Sponsorship: JISC

Early-Holocene environments in the Wadi Faynan, Jordan

Hunt, C. Elrishi, H. Gilbertson, D. Grattan, J. McLaren, S. Pyatt, B. Rushworth, G. Barker, G. Early-Holocene environments in the Wadi Faynan, Jordan. The Holocene. 2004. 14,6 pp 921-930

A dual-band antenna enabling improved quality of service in multi-radio wireless sensor applications in indoor environments

Science Foundation Ireland (CSET - Centre for Science, Engineering and Technology, Grant No. 07/CE/11147)

The differences in the social competence of children who attend integrated junior infant classes and children who attend segregated learning environments

There are a number of reasons why this researcher has decided to undertake this study into the differences in the social competence of children who attend integrated Junior Infant classes and children who attend segregated learning environments. Theses reasons are both personal and professional. My personal reasons stem from having grown up in a family which included both an aunt who presented with Down Syndrome and an uncle who presented with hearing impairment. Both of these relatives' experiences in our education system are interesting. My aunt was considered ineducable while her brother - my uncle - was sent to Dublin (from Cork) at six years of age to be educated by a religious order. My professional reasons, on the other hand, stemmed from my teaching experience. Having taught in both special and integrated classrooms it became evident to me that there was somewhat 'suspicion' attached to integration. Parents of children without disabilities questioned whether this process would have a negative impact on their children's education. While parents of children with disabilities debated whether integrated settings met the specific needs of their children. On the other hand, I always questioned whether integration and inclusiveness meant the same thing. My research has enabled me to find many answers. Increasingly, children with special educational needs (SEN) are attending a variety of integrated and inclusive childcare and education settings. This contemporary practice of educating children who present with disabilities in mainstream classrooms has stimulated vast interest on the impact of such practices on children with identified disabilities. Indeed, children who present with disabilities "fare far better in mainstream education than in special schools" (Buckley, cited in Siggins, 2001,p.25). However, educators and practitioners in the field of early years education and care are concerned with meeting the needs of all children in their learning environments, while also upholding high academic standards (Putman, 1993). Fundamentally, therefore, integrated education must also produce questions about the impact of this practice on children without identified special educational needs. While these questions can be addressed from the various areas of child development (i.e. cognitive, physical, linguistic, emotional, moral, spiritual and creative), this research focused on the social domain. It investigates the development of social competence in junior infant class children without identified disabilities as they experience different educational settings.

Repairing wireless sensor network connectivity in damaged environments

A wireless sensor network can become partitioned due to node failure, requiring the deployment of additional relay nodes in order to restore network connectivity. This introduces an optimisation problem involving a tradeoff between the number of additional nodes that are required and the costs of moving through the sensor field for the purpose of node placement. This tradeoff is application-dependent, influenced for example by the relative urgency of network restoration. In addition, minimising the number of relay nodes might lead to long routing paths to the sink, which may cause problems of data latency. This data latency is extremely important in wireless sensor network applications such as battlefield surveillance, intrusion detection, disaster rescue, highway traffic coordination, etc. where they must not violate the real-time constraints. Therefore, we also consider the problem of deploying multiple sinks in order to improve the network performance. Previous research has only parts of this problem in isolation, and has not properly considered the problems of moving through a constrained environment or discovering changes to that environment during the repair or network quality after the restoration. In this thesis, we firstly consider a base problem in which we assume the exploration tasks have already been completed, and so our aim is to optimise our use of resources in the static fully observed problem. In the real world, we would not know the radio and physical environments after damage, and this creates a dynamic problem where damage must be discovered. Therefore, we extend to the dynamic problem in which the network repair problem considers both exploration and restoration. We then add a hop-count constraint for network quality in which the desired locations can talk to a sink within a hop count limit after the network is restored. For each new problem of the network repair, we have proposed different solutions (heuristics and/or complete algorithms) which prioritise different objectives. We evaluate our solutions based on simulation, assessing the quality of solutions (node cost, movement cost, computation time, and total restoration time) by varying the problem types and the capability of the agent that makes the repair. We show that the relative importance of the objectives influences the choice of algorithm, and different speeds of movement for the repairing agent have a significant impact on performance, and must be taken into account when selecting the algorithm. In particular, the node-based approaches are the best in the node cost, and the path-based approaches are the best in the mobility cost. For the total restoration time, the node-based approaches are the best with a fast moving agent while the path-based approaches are the best with a slow moving agent. For a medium speed moving agent, the total restoration time of the node-based approaches and that of the path-based approaches are almost balanced.

Real time analysis of atmospheric single particles in urban environments using aerosol time of flight mass spectrometry

In order to determine the size-resolved chemical composition of single particles in real-time an ATOFMS was deployed at urban background sites in Paris and Barcelona during the MEGAPOLI and SAPUSS monitoring campaigns respectively. The particle types detected during MEGAPOLI included several carbonaceous species, metal-containing types and sea-salt. Elemental carbon particle types were highly abundant, with 86% due to fossil fuel combustion and 14% attributed to biomass burning. Furthermore, 79% of the EC was apportioned to local emissions and 21% to continental transport. The carbonaceous particle types were compared with quantitative measurements from other instruments, and while direct correlations using particle counts were poor, scaling of the ATOFMS counts greatly improved the relationship. During SAPUSS carbonaceous species, sea-salt, dust, vegetative debris and various metal-containing particle types were identified. Throughout the campaign the site was influenced by air masses altering the composition of particles detected. During North African air masses the city was heavily influenced by Saharan dust. A regional stagnation was also observed leading to a large increase in carbonaceous particle counts. While the ATOFMS provides a list of particle types present during the measurement campaigns, the data presented is not directly quantitative. The quantitative response of the ATOFMS to metals was examined by comparing the ion signals within particle mass spectra and to hourly mass concentrations of; Na, K, Ca, Ti, V, Cr, Mn, Fe, Zn and Pb. The ATOFMS was found to have varying correlations with these metals depending on sampling issues such as matrix effects. The strongest correlations were observed for Al, Fe, Zn, Mn and Pb. Overall the results of this work highlight the excellent ability of the ATOFMS in providing composition and mixing state information on atmospheric particles at high time resolution. However they also show its limitations in delivering quantitative information directly.

Subterfuge-safe trust management for delegation of permissions in open environments

Open environments involve distributed entities interacting with each other in an open manner. Many distributed entities are unknown to each other but need to collaborate and share resources in a secure fashion. Usually resource owners alone decide who is trusted to access their resources. Since resource owners in open environments do not have a complete picture of all trusted entities, trust management frameworks are used to ensure that only authorized entities will access requested resources. Every trust management system has limitations, and the limitations can be exploited by malicious entities. One vulnerability is due to the lack of globally unique interpretation for permission specifications. This limitation means that a malicious entity which receives a permission in one domain may misuse the permission in another domain via some deceptive but apparently authorized route; this malicious behaviour is called subterfuge. This thesis develops a secure approach, Subterfuge Safe Trust Management (SSTM), that prevents subterfuge by malicious entities. SSTM employs the Subterfuge Safe Authorization Language (SSAL) which uses the idea of a local permission with a globally unique interpretation (localPermission) to resolve the misinterpretation of permissions. We model and implement SSAL with an ontology-based approach, SSALO, which provides a generic representation for knowledge related to the SSAL-based security policy. SSALO enables integration of heterogeneous security policies which is useful for secure cooperation among principals in open environments where each principal may have a different security policy with different implementation. The other advantage of an ontology-based approach is the Open World Assumption, whereby reasoning over an existing security policy is easily extended to include further security policies that might be discovered in an open distributed environment. We add two extra SSAL rules to support dynamic coalition formation and secure cooperation among coalitions. Secure federation of cloud computing platforms and secure federation of XMPP servers are presented as case studies of SSTM. The results show that SSTM provides robust accountability for the use of permissions in federation. It is also shown that SSAL is a suitable policy language to express the subterfuge-safe policy statements due to its well-defined semantics, ease of use, and integrability.

BLAZE: Bettering the lives of animals in zoo environments

Gemstone Team BLAZE

Exploring the effects of image persistence in low frame rate virtual environments

© 2015 IEEE.In virtual reality applications, there is an aim to provide real time graphics which run at high refresh rates. However, there are many situations in which this is not possible due to simulation or rendering issues. When running at low frame rates, several aspects of the user experience are affected. For example, each frame is displayed for an extended period of time, causing a high persistence image artifact. The effect of this artifact is that movement may lose continuity, and the image jumps from one frame to another. In this paper, we discuss our initial exploration of the effects of high persistence frames caused by low refresh rates and compare it to high frame rates and to a technique we developed to mitigate the effects of low frame rates. In this technique, the low frame rate simulation images are displayed with low persistence by blanking out the display during the extra time such image would be displayed. In order to isolate the visual effects, we constructed a simulator for low and high persistence displays that does not affect input latency. A controlled user study comparing the three conditions for the tasks of 3D selection and navigation was conducted. Results indicate that the low persistence display technique may not negatively impact user experience or performance as compared to the high persistence case. Directions for future work on the use of low persistence displays for low frame rate situations are discussed.

Integrated fire and evacuation in maritime environments

When designing a new passenger ship or modifying an existing design, how do we ensure that the proposed design and crew emergency procedures are safe from an evacuation resulting from fire or other incident? In the wake of major maritime disasters such as the Scandinavian Star, Herald of Free Enterprise, Estonia and in light of the growth in the numbers of high density high-speed ferries and large capacity cruise ships, issues concerning the evacuation of passengers and crew at sea are receiving renewed interest. Fire and evacuation models with features such as the ability to realistically simulate the spread of fire and fire suppression systems and the human response to fire sas well as the capability to model human performance in heeled orientations linked to a virtual reality environment that produces realistic visualisations of modelled scenarios are now available and can be used to aid the engineer in assessing ship design and procedures. This paper describes the maritmeEXODUS ship evacuation and the SMARTFIRE fire simulation model and provides an example application demonstrating the use of the models in performing fire and evacuation analysis for a large passenger ship partially based on the requirements of MSC circular 1033. The fire simulations include the action of a water mist system.

Use of Web Logs (Blogs) in Learning Environments: Blogs for Student Support

Innovation in technology and communications and particularly the advent of the Web is changing the structure of teaching and learning today. While there is much debate about the use of technology in learning and how e-learning is creating new approaches to delivery of learning there is been very little if any work on the use of of the emerging technologies in providing student support through their learning process. This paper reports on research and development undertaken by the eCentre based at the University of Greenwich School Of Computing in designing and developing a "Project Blog System" in order to address some long standing issues related to supervision of final year degree student projects. The paper will report on the methodology used to design the system and will discuss some of the results from students and staff evaluation of the system developed.