EFFECT OF TREATMENT WITH GROWTH-REGULATORS AND SCARIFICATION ON THE TOLERANCE TO WATER-STRESS IN SEEDS OF ORYZA-SATIVA LCVIAC-165

The effect of treatment of seeds of Oryza sativa L. cv. IAC 165 with gibberellic acid, 6-benzyladenine and ethrel on the tolerance to the water stress were analysed. Gibberellic acid had no effect and 6-benzyladenine and ethrel promoted slight increase in the tolerance to water stress, specially in darkness. After scarification, those growth regulator presented no effect. Our results suggest that 6-benzyladenine and ethrel promoted water stress tolerance due to the decrease in the resistance of the seed coat to embryo expansion.

The effect of drying and urea treatment on nutritional and anti-nutritional components of browses collected during wet and dry seasons

Fibre, crude protein and tannin concentrations were measured in browse species from the semi-arid region of Northeast Brazil during the dry and wet seasons. The effects of oven-, sun- and shade-drying and of urea treatment were also determined. Crude protein (CP) content varied from 103 to 161 g/kg dry matter (DM) and the browses had similar CP content in the two seasons (during 2002) (102-161 and 107-153 g/kg DM in the wet and dry seasons, respectively). Total tannin concentrations ranged from 13 to 201 g/kg DM amongst the browses and were higher in the dry season. A 30-d treatment with urea reduced extractable tannins significantly (P < 0.05). The urea treatment was also most effective at reducing the in vitro effects of tannins compared to the other drying treatments. This was demonstrated by measuring the effect of polyethylene glycol (PEG) on gas production. Addition of PEG increased gas production of oven- (81.4%), sun- (78.5%) and shade-dried (76.7%) samples much more compared to urea treated samples (10.9%). (c) 2005 Elsevier B.V. All rights reserved.

Effect of foliar and substrate fertilization on lady palm seedling growth and development

Lady palm, [Rhapis excelsa (Thunberg) Henry ex. Rehder] is one of the most cultivated ornamental palms in the world, for use as a vase plant or in shaded landscapes. Because limited information exists on lady palm response to fertilizers, the objective of this study was to evaluate the effect of different types of fertilization and substrates on lady palm seedling growth and development. Three year old lady palms were planted in 8-L pots, filled with a mix of soil, manure, and sand 1:1:1 (v:v:v), placed under a 50% shade, and irrigated with microspray. Treatments were substrate fertilization with 500 g P(2)O(5) and 100 g K(2)O per m(3); fertilization with 1.8 kg of P(2)O(5) (simple superphosphate) per m3; 50 g of nitrogen (N), P(2)O(5), and K(2)O of a granulated fertilizer (10:10:10) per m(3), control (without fertilization), and a foliar fertilization in addition to these treatments using the commercial product Biofert (8:9:9). Treatments were replicated four times in a randomized block design. Each treatment plot consisted of four plants. Data were collected at 140, 170, 200, 230, 260, and 290 days after transplanting (DAT) for plant heights, stem diameter at substrate level, number of leaves, shoots, and canopy, roots fresh and dry matter samples were harvest at 290 days. Foliar fertilization resulted in significantly greater plant height in a 140, 120, 200, and 230 DAT and plant diameter on the 140, 260, and 290 DAT. There was interaction among factors for number of leaves with fertilization based on P(2)O(5) and K(2)O when leaf fertilizer was added that resulted in a greater number of leaves.

Effect of surface treatment on fatigue behavior of metal/carbon fiber laminates

The tension-tension fatigue behavior of metal/fiber laminates (MFLs) has been investigated. These MFLs were produced with carbon fiber and by treating the aluminum foil to promote adhesion bonding by two methods: sulfuric-boric-oxalic acid anodization (SBOA) and chromic acid anodization (CAA). The surface treatments were evaluated by scanning electron microscopy (SEM) techniques and roughness measurements. It was observed that MFL specimens produced with SBOA treatments presents comparable mechanical results when compared with MFLs produced with CAA treatment. Microstructural observations of the fracture surfaces by SEM show hackle formation is the predominant damage mechanism.

Effect of a single acupuncture treatment on surgical wound healing in dogs: a randomized, single blinded, controlled pilot study

Background: The aim of the study was to investigate the effect of acupuncture on wound healing after soft tissue or orthopaedic surgery in dogs.Methods: 29 dogs were submitted to soft tissue and/or orthopaedic surgeries. Five dogs had two surgical wounds each, so there were totally 34 wounds in the study. All owners received instructions for post operative care as well as antibiotic and pain treatment. The dogs were randomly assigned to treatment or control groups. Treated dogs received one dry needle acupuncture treatment right after surgery and the control group received no such treatment. A veterinary surgeon that was blinded to the treatment, evaluated the wounds at three and seven days after surgery in regard to oedema (scale 0-3), scabs (yes/no), exudate (yes/no), hematoma (yes/no), dermatitis (yes/no), and aspect of the wound (dry/humid).Results: There was no significant difference between the treatment and control groups in the variables evaluated three and seven days after surgery. However, oedema reduced significantly in the group treated with acupuncture at seven days compared to three days after surgery, possibly due the fact that there was more oedema in the treatment group at day three (although this difference was nor significant between groups).Conclusions: The use of a single acupuncture treatment right after surgery in dogs did not appear to have any beneficial effects in surgical wound healing.

Effect of dentine surface treatment on leakage of root fillings with a glass ionomer sealer.

The purpose of this study was to observe the quality of seal of the glass ionomer cement, Ketac-Endo, after treatment of the root canal wall. The root canals of 140 extracted human teeth were prepared biomechanically. The root canals were treated with either EDTA or received an intracanal dressing of calcium hydroxide or camphorated paramonochlorphenol. The root canals were filled by the lateral condensation technique with gutta-percha points and the sealer Ketac-Endo, or zinc oxide-eugenol cement or Sealapex. The teeth were placed into a 2% methylene blue dye solution inside a flask, which was attached to a vacuum pump. Leakage was measured linearly. Sealapex exhibited significantly less leakage than Ketac-Endo or zinc oxide-eugenol cement (P<0.01). The use of EDTA and intermediary dressings reduced significantly (P<0.01) the leakage observed with the zinc oxide-eugenol sealer and Ketac-Endo.

Long-term effect of prolactin treatment on glucose-induced insulin secretion in cultured neonatal rat islets

Insulin secretion and 45SCa2+ uptake and efflux were studied in neonatal rat islets maintained in culture for 7 or 19 days in the absence or presence of prolactin (PRL). Insulin secretion in response to glucose (G), leucine (Leu), arginine (Arg) and carbachol (Cch) was augmented after 7 and 19 days in culture, compared to basal secretion (G 2.8 mM), in both PRL- treated and control islets. However, the increase in insulin secretion induced by the above secretagogues was higher in islets cultured in the presence of PRL for 19 days. In PRL-treated islets, the 45Ca2+ content after a 5 min incubation in the presence of G, Leu, Arg and Cch was significantly higher than the control only in islets cultured for 19 days. Except with Arg, the 45Ca2+ uptake in PRL-treated islets after a 90 min incubation was also significantly higher than the control only in islets cultured for 19 days. Finally, Leu-induced alterations in the 45Ca2+ efflux were higher in PRL-treated than in control islets cultured for 7 or 19 days. In the absence of external Ca2+, the reduction in 45Ca2+ efflux induced by glucose was also significantly higher in PRL-treated than in control islets. This effect was slightly potentiated after 19 days in culture. These data further support the hypothesis that PRL treatment enhances maturation of the secretory mechanism in neonatal islets. This effect can be potentiated even more if the treatment is prolonged.

Effect of different plot coverings on emergence and early development of seven palm species (arecaceae)

The Arecaceae family comprises plants with economical importance in many Brazilian regions, for agricultural exploration or for landscaping. In great portion, species of this family present low germination velocity and percentage. This work meant to evaluate the germination and early development of seven palm species (Archontophoenix alexandrae H. Wendl. et Drude, Copernicia prunifera (Miller) H.E. Moore, Latania commersonii Gmel., Livistona chinensis R. Br., Syagrus campos-portoana Bondar, Syagrus coronata (Mart.) Beccari, Syagrus picrophylla Barb. Rod.), submitted to three kinds of seed bed plot coverings. Three 10 x 2 m seedbeds were built and filled with a mixture of sand, soil and chicken manure (1:3:0.5 proportion), where two lines were sown with each specie. On top of each seedbed, plastic covering and fifty percent screen were set allowing one third of the seedbed to full sunlight exposure. Seedbeds were irrigated by dripping system. All species had the same germination rate, regardless of the covering, by the end of the experiment (146 days after sowing), eventhough, A. alexandrae under plastic covering conditions, L. commersonii at full sunlight exposure and Syagrus campos-portoana under fifty percent shade, had reached that percentage around 51 days after sowing. The remaining species reached the greatest germination percentage earlier with some of the coverings, rather than at full sunlight exposure. For the studied conditions, covering type had no effect in leaf length and width. For leaf number, there was interaction between species x covering type for Livistona chinensis and Copernicia prunifera.

Effect of thermal treatment on the morphology of PLZT thin films prepared from polymeric precursor method

Lead lanthanum zirconate titanate (PLZT) thin films with (9/65/35) stoichiometry were prepared by dip coating from polymeric precursor method. The films deposited on silicon (100) substrates, were thermally treated from 450° to 700°C for 6 hours in order to study the influence of thermal treatment on the crystallinity, microstructure, grain size and roughness of the final film. X-ray diffraction results showed that PLZT phase crystallizes at low temperature (500°C) and present preferential orientation. It was observed by scanning electron microscopy (SEM) that it is possible to obtain dense thin films at temperatures around 650°C. The atomic force microscopy (AFM) studies showed that the grain size and roughness are strongly influenced by the annealing temperature.

Experimental control of the effect of extra doses of juvenile hormone on bee development: The case of the wax glands of Apis mellifera (Hymenoptera: Apidae)

Experiments on the effect of topical application of the synthetic juvenile hormone (JH-III) and of the solvent used to dissolve the hormone on the development of the wax glands of workers of Apis mellifera, were made. The results show that it was impossible to determine the effect of the juvenile hormone (JH) apart from its solvent (acetone), which also alters the developmental pattern of the gland. Most of the experiments reported in scientific literature do not consider the effect of the solvent, analyzing the results by only comparing the treatment with the hormone plus solvent to a control without any treatment. The data presented suggests that this kind of procedure compromises the evaluation of the real JH effect.

Effect of a heat-treatment on the linear dimensional change of a hard chairside reline resin

Statement of problem. Little data are available regarding the effect of heat-treatments on the dimensional stability of hard chairside reline resins. Purpose. The objective of this in vitro study was to evaluate whether a heat-treatment improves the dimensional stability of the reline resin Duraliner II and to compare the linear dimensional changes of this material with the heat-polymerized acrylic resin Lucitone 550. Material and methods. The materials were mixed according to the manufacturer's instructions and packed into a stainless steel split mold (50.0 mm diameter and 0.5 mm thickness) with reference points (A, B, C, and D). Duraliner II specimens were polymerized for 12 minutes in water at 37°C and bench cooled to room temperature before being removed from the mold. Twelve specimens were made and divided into 2 groups: group 1 specimens (n=6) were left untreated, and group 2 specimens (n=6) were submitted to a heat-treatment in a water bath at 55°C for 10 minutes and then bench cooled to room temperature. The 6 Lucitone specimens (control group) were polymerized in a water bath for 9 hours at 71°C. The specimens were removed after the mold reached the room temperature. A Nikon optical comparator was used to measure the distances between the reference points (AB and CD) on the stainless steel mold (baseline readings) and on the specimens to the nearest 0.001 mm. Measurements were made after processing and after the specimens had been stored in distilled water at 37°C for 8 different periods of time. Data were subjected to analysis of variance with repeated measures, followed by Tukey's multiple comparison test (P<.05). Results. All specimens exhibited shrinkage after processing (control, -0.41%; group 1, -0.26%; and group 2, -0.51%). Group 1 specimens showed greater shrinkage (-1.23%) than the control (-0.23%) and group 2 (-0.81%) specimens after 60 days of storage in water (P<.05). Conclusion. Within the limitations of this study, a significant improvement of the long-term dimensional stability of the Duraliner II reline resin was observed when the specimens were heat-treated. However, the shrinkage remained considerably higher than the denture base resin Lucitone 550. Copyright © 2002 by The Editorial Council of The Journal of Prosthetic Dentistry.

Influence of the application of juvenile hormone on the haemolymph total proteins and electrophoretic pattern of worker larvae of Apis mellifera

The aim of the present work was to verify the influence of the juvenile hormone (JH) applied on worker larvae of Apis mellifera 2 to 5 days old over the haemolymph total protein and electrophoretic pattern. Each larvae received topical applications of 1 ml of a solution of JH in hexane (1 μg/ml) on their 2 nd, 3 rd 4 th and 5 th day after hatching and had the amount and electrophoretic pattern of proteins from the haemolymph analyzed during the remaining days of their life. As a control, haemolymph of larvae of the same age that did not receive any kind of treatment was analyzed. The results show that the application of JH on larvae 3 or more days old affect the amount and electrophoretic pattern of the proteins, with this effect lasting through the subsequent days.