The LTTE Proposals for an Interim Self-Governing Authority and Future of the Peace Process in Sri Lanka

The political brinkmanship of the Liberation Tigers of the Tamil Eelam has been illustrated vividly by the way in which it brought forward its proposals for an Interim Self-Governing Authority by exploiting the vulnerabilities of the United National Front Government. In the proposals the LTTE articulated its political intentions in concrete constitutional terms for the first time. The Proposals rationalize the armed struggle and a contractual agreement outside the Constitution. The plenary powers of the ISGA exceed the federal formula; effectively exclude the institutions of the state of Sri Lanka from the North-East; and clear the route for a separate state. This situation demands a redirection of the peace process which requires a clear political vision and a proper strategy with alternative proposals on the part of the government. In the face of present impasse of the peace process the challenges before the new Freedom Alliance government are formidable.

The Policy Making Process in FTA Negotiations: A Case Study of Japanese Bilateral EPAs

This paper analyzes Japanese bilateral EPA negotiations, focusing on the areas that each country decided were most important, as well as which actors played the most important roles in each set of negotiations. The negotiations with Mexico and Thailand, which tried to increase agricultural exports to Japan through FTAs, will be discussed. Japan, one should note, still seeks to protect its agricultural sector in spite of the spread of liberalization. The Philippines, Thailand and Malaysia’s efforts to improve and compete in developing their automotive industries, in the face of the completion of AFTA in 2010, are also examined. In addition, this paper discusses whether economic cooperation, the essential Japanese strategy in EPA negotiations, alters the negotiation process in any significant way.

Development strategy in Bihar through revitalizing the agricultural sector : a preliminary analysis

Based mainly on secondary data and partly on primary information obtained through field surveys in selected rural areas in Bihar in 2011, this paper firstly argues the critical importance of agricultural growth for overall economic development, and then reviews the sluggish growth of agriculture in Bihar in the past and examines the major reasons for this. The long-term negligence of agricultural research (especially development and diffusion endeavors for improved rice varieties suitable to the local conditions of Bihar) by the state government and some sort of ‘backwardness’ in tube-well irrigation technology can be pointed out as important constraints. There is, in particular, the ‘paradox’ in Bihar agriculture of why rice and wheat yields have remained so low in spite of the relatively well-developed irrigation by tube-wells. Finally, by showing the process of a rapid increase in autumn and winter rice yields during the 1990s in West Bengal, it is suggested that Bihar farmers and policy-makers should learn from the experience of West Bengal in order to get some hints for the development of the rice sector in Bihar.

Relaciones entre los usos del suelo, las infraestructuras y la planificación: incidencia de la red viaria y el planeamiento en la aparición del terciario para el caso de la N-VI

Esta tesis examina el papel de la red viaria y el planeamiento urbanístico en la localización de las actividades terciarias. A partir de los años sesenta se produce una modificación de los patrones de comportamiento espacial de las actividades productivas. En la raíz de estos cambios está los procesos de globalización e internacionalización de la economía y un importante aumento de la utilización vehículos privados. Todo ello da lugar a una preocupación entre los profesionales por la identificación de variables en esa organización espacial, y por la búsqueda de modelos que mejorasen las condiciones de competitividad en el entramado urbano, reclamado también la formulación de conceptos diferentes, capaces de entender los cambios territoriales de la reestructuración permanente en que viven las economías capitalistas avanzadas. En este marco, hay un aumento importante de las actividades terciarias o proceso de terciarización; que es el principio basilar para la suburbanización de este sector. Consiste, en buena medida, en unas necesidades de descentralización y dispersión de las actividades terciarias por todo el territorio, con demandas de nuevos espacios para todo tipo de actividades empresariales. Se va así generando un espacio urbano complejo, con nuevas actividades, distintas de la residencial, y con tipologías edificatorias diferentes: centros comerciales, hipermercados, zocos o edificios de empresas dedicadas a servicios avanzados y altamente cualificados. Adquiere, por tanto, un fuerte protagonismo los espacios periféricos de las grandes ciudades. En la transformación de este territorio interviene el planeamiento urbanístico porque prevé la ocupación del suelo y la forma de uso. Y también la carretera considerada clave en el desarrollo histórico de la ciudad. Consecuentemente, se impulsan una plétora de nuevas líneas de investigación y nuevas formas de aproximación al estudio de las relaciones entre las infraestructuras viarias y los usos del suelo. El interés del proyecto de investigación es, por todo ello, estudiar en que medida la localización del terciario depende del planeamiento urbano y de las variaciones en la red viaria. Es decir, la hipótesis de este trabajo se puede enunciar diciendo que: en la aparición del terciario inciden dos variables, el planeamiento urbanístico y la red viaria; lógicamente siendo consciente de la dificultad intrínseca de separar algún parámetro y sus relaciones de un sistema funcional urbano. Centrando este enfoque sobre el caso particular del corredor de la carretera de La Coruña (N-VI) situado en el oeste de la Comunidad de Madrid. Es un ámbito suburbano que comprende los términos municipales de Las Rozas y Majadahonda, un segmento del municipio de Madrid (abarca los barrios de Aravaca, el Plantío y Valdemarín, y una pequeña superficie de la Casa de Campo, Ciudad Universitaria y El Pardo), y la mitad septentrional del municipio de Pozuelo de Alarcón. La conclusión general a la que se ha llegado es que se trata de un fenómeno complejo, en el que se detecta que: A) La aprobación de un nuevo Plan Urbanístico no supone un cambio inmediato en la evolución cuantitativa de la implantación de actividades terciarias en edificio exclusivo en el área de estudio. B) Se evidencia una relación directa entre la implantación de una nueva infraestructura de transporte o modificación de algún elemento importante y el crecimiento de la localización de actividades terciarias. C) Resulta difícil verificar que cuando confluyen mejoras o nuevas construcciones en la red viaria y una estrategia en el planeamiento dirigida a la ordenación e intervención del espacio terciario, el número de edificios terciarios aumente. ABSTRACT This thesis examines the role of road networks and urban planning in the location of tertiary activities. Since the sixties there is a modification of spatial behavior patterns of production activities. At the root of these changes is the process of globalization and internationalization of the economy and a significant increase in private car use. This leads to a concern among professionals in the identification of variables in the spatial organization, and the search for models that would improve the competitive conditions in the urban framework, also called for the formulation of different concepts, able to understand the changes territorial restructuring that live permanently in the advanced capitalist economies. In this context, there is a significant increase in tertiary activities or process outsourcing, which is the beginning basilar to the suburbanization of the sector. It consists, in large part, on the Needs of decentralization and dispersal of tertiary activities throughout the territory, demands for new spaces for all types of business activities. It is thus generating a complex urban area, with new activities, other than residential and with different building typologies: shopping malls, hypermarkets, souks and buildings of companies engaged in advanced and highly skilled services. Thus takes strong role peripheral areas of big cities. In the transformation of this region is involved in providing for urban planning land use and how to use. And the road is considered key in the historical development of the city. Consequently, they are promoting a plethora of new research and new ways of approaching the study of the relationship between road infrastructure and land use. The interest of the research project is, for all that, consider to what extent depends on the location of tertiary urban planning and changes in the road network. That is, the hypothesis of this work can be stated by saying that: the emergence of two variables affecting tertiary, urban planning and road network, of course being aware of the inherent difficulty of separating any parameters and functional relationships of an urban. Approach focusing on the particular case of the road corridor from La Coruña (N-VI) located in the west of Madrid. It is a suburban area comprising the municipalities of Las Rozas and Majadahonda, a segment of the city of Madrid (covering the districts of Aravaca, the planting and Valdemarín, and a small area of the Casa de Campo, Ciudad Universitaria and El Pardo) , and the northern half of the town of Pozuelo de Alarcón. The general conclusion has been reached is that this is a complex phenomenon, which is detected: A) The approval of a new Urban Plan is not an immediate change in the quantitative evolution of the implementation of tertiary activities in exclusive building in the study area. B) It shows a direct relationship between the introduction of a new transport infrastructure or amendment to an important and growing element of the location of tertiary activities. C) It is difficult to verify that when improvements or new construction come together in the road network and planning a strategy aimed at the management and intervention of third space, the number of commercial buildings increases.

Training project management complexity in postgraduate and continuing education programs: a learning strategy in the eshe (European Space of Higher Education) framework

The objective of this paper is to address the methodological process of a teaching strategy for training project management complexity in postgraduate programs. The proposal is made up of different methods —intuitive, comparative, deductive, case study, problem-solving Project-Based Learning— and different activities inside and outside the classroom. This integration of methods motivated the current use of the concept of “learning strategy”. The strategy has two phases: firstly, the integration of the competences —technical, behavioral and contextual—in real projects; and secondly, the learning activity was oriented in upper level of knowledge, the evaluating the complexity for projects management in real situations. Both the competences in the learning strategy and the Project Complexity Evaluation are based on the ICB of IPMA. The learning strategy is applied in an international Postgraduate Program —Erasmus Mundus Master of Science— with the participation of five Universities of the European Union. This master program is fruit of a cooperative experience from one Educative Innovation Group of the UPM -GIE-Project-, two Research Groups of the UPM and the collaboration with other external agents to the university. Some reflections on the experience and the main success factors in the learning strategy were presented in the paper

Training project management complexity in postgraduate and continuing education programs: a learning strategy in the eshe (European Space of Higher Education) framework

The objective of this paper is to address the methodological process of a teaching strategy for training project management complexity in postgraduate programs. The proposal is made up of different methods —intuitive, comparative, deductive, case study, problem-solving Project-Based Learning— and different activities inside and outside the classroom. This integration of methods motivated the current use of the concept of ―learning strategy‖. The strategy has two phases: firstly, the integration of the competences —technical, behavioral and contextual—in real projects; and secondly, the learning activity was oriented in upper level of knowledge, the evaluating the complexity for projects management in real situations. Both the competences in the learning strategy and the Project Complexity Evaluation are based on the ICB of IPMA. The learning strategy is applied in an international Postgraduate Program —Erasmus Mundus Master of Science— with the participation of five Universities of the European Union. This master program is fruit of a cooperative experience from one Educative Innovation Group of the UPM -GIE-Project-, two Research Groups of the UPM and the collaboration with other external agents to the university. Some reflections on the experience and the main success factors in the learning strategy were presented in the paper.

Modelo multifactorial para optimización de la productividad en el proceso de generación de energía eléctrica : aplicación al caso de las centrales hidroeléctricas venezolanas

Las organizaciones son sistemas o unidades sociales, compuestas por personas que interactúan entre sí, para lograr objetivos comunes. Uno de sus objetivos es la productividad. La productividad es un constructo multidimensional en la que influyen aspectos tecnológicos, económicos, organizacionales y humanos. Diversos estudios apoyan la influencia de la motivación de las personas, de las habilidades y destrezas de los individuos, de su talento para desempeñar el trabajo, así como también del ambiente de trabajo presente en la organización, en la productividad. Por esta razón, el objetivo general de la investigación, es analizar la influencia entre los factores humanos y la productividad. Se hará énfasis en la persona como factor productivo clave, para responder a las interrogantes de la investigación, referidas a cuáles son las variables humanas que inciden en la productividad, a la posibilidad de plantear un modelo de productividad que considere el impacto del factor humano y la posibilidad de encontrar un método para la medición de la productividad que contemple la percepción del factor humano. Para resolver estas interrogantes, en esta investigación se busca establecer las relaciones entre las variables humanas y la productividad, vistas desde la perspectiva de tres unidades de análisis diferentes: individuo, grupo y organización, para la formulación de un modelo de productividad humana y el diseño de un instrumento para su medida. Una de las principales fuente de investigación para la elección de las variables humanas, la formulación del modelo, y el método de medición de la productividad, fue la revisión de la literatura disponible sobre la productividad y el factor humano en las organizaciones, lo que facilitó el trazado del marco teórico y conceptual. Otra de las fuentes para la selección fue la opinión de expertos y de especialistas directamente involucrados en el sector eléctrico venezolano, lo cual facilitó la obtención de un modelo, cuyas variables reflejasen la realidad del ámbito en estudio. Para aportar una interpretación explicativa del fenómeno, se planteó el modelo de los Factores Humanos vs Productividad (MFHP), el cual se analizó desde la perspectiva del análisis causal y fue conformado por tres variables latentes exógenas denominadas: factores individuales, factores grupales y factores organizacionales, que estaban relacionadas con una variable latente endógena denominada productividad. El MFHP se formuló mediante la metodología de los modelos de ecuaciones estructurales (SEM). Las relaciones inicialmente propuestas entre las variables latentes fueron corroboradas por los ajustes globales del modelo, se constataron las relaciones entre las variables latentes planteadas y sus indicadores asociados, lo que facilitó el enunciado de 26 hipótesis, de las cuales se comprobaron 24. El modelo fue validado mediante la estrategia de modelos rivales, utilizada para comparar varios modelos SEM, y seleccionar el de mejor ajuste, con sustento teórico. La aceptación del modelo se realizó mediante la evaluación conjunta de los índices de bondad de ajuste globales. Asimismo, para la elaboración del instrumento de medida de la productividad (IMPH), se realizó un análisis factorial exploratorio previo a la aplicación del análisis factorial confirmatorio, aplicando SEM. La revisión de los conceptos de productividad, la incidencia del factor humano, y sus métodos de medición, condujeron al planteamiento de métodos subjetivos que incorporaron la percepción de los principales actores del proceso productivo, tanto para la selección de las variables, como para la formulación de un modelo de productividad y el diseño de un instrumento de medición de la productividad. La contribución metodológica de este trabajo de investigación, ha sido el empleo de los SEM para relacionar variables que tienen que ver con el comportamiento humano en la organización y la productividad, lo cual abre nuevas posibilidades a la investigación en este ámbito. Organizations are social systems or units composed of people who interact with each other to achieve common goals. One objective is productivity, which is a multidimensional construct influenced by technological, economic, organizational and human aspects. Several studies support the influence on productivity of personal motivation, of the skills and abilities of individuals, of their talent for the job, as well as of the work environment present in the organization. Therefore, the overall objective of this research is to analyze the influence between human factors and productivity. The emphasis is on the individual as a productive factor which is key in order to answer the research questions concerning the human variables that affect productivity and to address the ability to propose a productivity model that considers the impact of the human factor and the possibility of finding a method for the measurement of productivity that includes the perception of the human factor. To consider these questions, this research seeks to establish the relationships between human and productivity variables, as seen from the perspective of three different units of analysis: the individual, the group and the organization, in order to formulate a model of human productivity and to design an instrument for its measurement. A major source of research for choosing the human variables, model formulation, and method of measuring productivity, was the review of the available literature on productivity and the human factor in organizations which facilitated the design of the theoretical and conceptual framework. Another source for the selection was the opinion of experts and specialists directly involved in the Venezuelan electricity sector which facilitated obtaining a model whose variables reflect the reality of the area under study. To provide an interpretation explaining the phenomenon, the model of the Human Factors vs. Productivity Model (HFPM) was proposed. This model has been analyzed from the perspective of causal analysis and was composed of three latent exogenous variables denominated: individual, group and organizational factors which are related to a latent variable denominated endogenous productivity. The HFPM was formulated using the methodology of Structural Equation Modeling (SEM). The initially proposed relationships between latent variables were confirmed by the global fits of the model, the relationships between the latent variables and their associated indicators enable the statement of 26 hypotheses, of which 24 were confirmed. The model was validated using the strategy of rival models, used for comparing various SEM models and to select the one that provides the best fit, with theoretical support. The acceptance of the model was performed through the joint evaluation of the adequacy of global fit indices. Additionally, for the development of an instrument to measure productivity, an exploratory factor analysis was performed prior to the application of a confirmatory factor analysis, using SEM. The review of the concepts of productivity, the impact of the human factor, and the measurement methods led to a subjective methods approach that incorporated the perception of the main actors of the production process, both for the selection of variables and for the formulation of a productivity model and the design of an instrument to measure productivity. The methodological contribution of this research has been the use of SEM to relate variables that have to do with human behavior in the organization and with productivity, opening new possibilities for research in this area.

Advanced predictive quality control strategy involving different facilities

There are many industries that use highly technological solutions to improve quality in all of their products. The steel industry is one example. Several automatic surface-inspection systems are used in the steel industry to identify various types of defects and to help operators decide whether to accept, reroute, or downgrade the material, subject to the assessment process. This paper focuses on promoting a strategy that considers all defects in an integrated fashion. It does this by managing the uncertainty about the exact position of a defect due to different process conditions by means of Gaussian additive influence functions. The relevance of the approach is in making possible consistency and reliability between surface inspection systems. The results obtained are an increase in confidence in the automatic inspection system and an ability to introduce improved prediction and advanced routing models. The prediction is provided to technical operators to help them in their decision-making process. It shows the increase in improvement gained by reducing the 40 % of coils that are downgraded at the hot strip mill because of specific defects. In addition, this technology facilitates an increase of 50 % in the accuracy of the estimate of defect survival after the cleaning facility in comparison to the former approach. The proposed technology is implemented by means of software-based, multi-agent solutions. It makes possible the independent treatment of information, presentation, quality analysis, and other relevant functions.

SMS-based optimization strategy for ultra-compact SWIR telephoto lens design

A new optical design strategy for rotational aspheres using very few parameters is presented. It consists of using the SMS method to design the aspheres embedded in a system with additional simpler surfaces (such as spheres, parabolas or other conics) and optimizing the free-parameters. Although the SMS surfaces are designed using only meridian rays, skew rays have proven to be well controlled within the optimization. In the end, the SMS surfaces are expanded using Forbes series and then a second optimization process is carried out with these SMS surfaces as a starting point. The method has been applied to a telephoto lens design in the SWIR band, achieving ultra-compact designs with an excellent performance.

Influence of Atmospheric Conditions on mmWave CATR Facilities: Formulation and Compensation Scheme

The performance of a CATR relies on the planarity of the synthesized test wave, which is generated within a bounded volume for which specifications are drawn. Millimetre-wave facilities deal with the classical limitations of this frequency band, among which two become critical in our analysis: time-extensive acquisition campaigns and impact of environmental variables. Both features become more evident when increasing the frequency of operation. The variation in atmospheric variables, such as humidity, temperature and pressure has an influence over the performance of all the elements of the facility. The instrumentation behavior is influenced both by the warming up process, and the ambience conditions that surround the equipment. On the changes of the atmosphere itself, they affect the electromagnetic wave propagation, given the physical link between the conditions of the atmosphere and its electric properties as an electromagnetic waves propagation medium

Efficient spatio-temporal hole filling strategy for Kinect depth maps

In this paper we present an efficient hole filling strategy that improves the quality of the depth maps obtained with the Microsoft Kinect device. The proposed approach is based on a joint-bilateral filtering framework that includes spatial and temporal information. The missing depth values are obtained applying iteratively a joint-bilateral filter to their neighbor pixels. The filter weights are selected considering three different factors: visual data, depth information and a temporal-consistency map. Video and depth data are combined to improve depth map quality in presence of edges and homogeneous regions. Finally, the temporal-consistency map is generated in order to track the reliability of the depth measurements near the hole regions. The obtained depth values are included iteratively in the filtering process of the successive frames and the accuracy of the hole regions depth values increases while new samples are acquired and filtered

The influence of transparency on self-evaluation as part of the university accreditation process in Peru.

In order to show the choice of transparency as the guiding principle of the accreditation process, the article evaluates its influence on the fundamental subprocess of self-evaluation, thereby confirming that transparency is an essential tool for continuous improvement of academic processes and those of educational quality management. It fosters educational innovation and permits the sustainability of the continuous accreditation process over time, resulting in greater probabilities of university self-regulation through systemization of the process, with the objective of continuous improvement of university degree programs. The article analyzes the influence of transparency on each activity of the self-evaluation process according to the Peruvian accreditation model prepared under the total quality approach, as a reference for other accreditation models, proposing concrete transparency actions and evaluating its influence on the stakeholder groups in the self-evaluation process, as well as on the efficiency and effectiveness of the process. It is concluded that transparency has a positive influence on the training of human capital and the formation of the university?s organizational culture, facilitating dissemination, understanding and involvement of the stakeholder groups in the continuous improvement of accreditation activities and increasing their acceptance of change and commitment to the process. It is confirmed that transparency contributes toward increasing the efficiency index of the self-evaluation process by reducing operating costs through adequate, accessible, timely contribution of information by the stakeholders and through the optimization of the time spent gathering relevant information. In addition, it is concluded that transparency contributes toward increasing the effectiveness index of self-evaluation by facilitating the achievement of its objectives through synthetic, useful, reliable interpretation of the education situation and the formulation of feasible improvement plans based on the adequacy, relevance, visibility, pertinence and truthfulness of the information analyzed.

A CAD development strategy for the next years

This paper suggests a new strategy to develop CAD applications taking into account some of the most interesting proposals which have recently appeared in the technology development arena. Programming languages, operating systems, user devices, software architecture, user interfaces and user experience are among the elements which are considered for a new development framework. This strategy considers the organizational and architectural aspects of the CAD application together with the development framework. The architectural and organizational aspects are based on the programmed design concept, which can be implemented by means of a three-level software architecture. These levels are the conceptual level based on a declarative language, the mathematical level based on the geometric formulation of the product model and the visual level based on the polyhedral representation of the model as required by the graphic card. The development framework which has been considered is Windows 8. This operating system offers three development environments, one for web pplications (HTML5 + CSS3 + JavaScript), and other for native applications C/C++) and of course yet another for .NET applications (C#, VB, F#, etc.). The use rinterface and user experience for non-web application is described ith XAML (a well known declarative XML language) and the 3D API for games and design applications is DirectX. Additionally, Windows 8 facilitates the use of hybrid solutions, in which native and managed code can interoperate easily. Some of the most remarkable advantages of this strategy are the possibility of targeting both desktop and touch screen devices with the same development framework, the usage of several programming paradigms to apply the most appropriate language to each domain and the multilevel segmentation of developers and designers to facilitate the implementation of an open network of collaborators.

An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: Application to AZ31 Mg alloy

An inverse optimization strategy was developed to determine the single crystal properties from experimental results of the mechanical behavior of polycrystals. The polycrystal behavior was obtained by means of the finite element simulation of a representative volume element of the microstructure in which the dominant slip and twinning systems were included in the constitutive equation of each grain. The inverse problem was solved by means of the Levenberg-Marquardt method, which provided an excellent fit to the experimental results. The iterative optimization process followed a hierarchical scheme in which simple representative volume elements were initially used, followed by more realistic ones to reach the final optimum solution, leading to important reductions in computer time. The new strategy was applied to identify the initial and saturation critical resolved shear stresses and the hardening modulus of the active slip systems and extension twinning in a textured AZ31 Mg alloy. The results were in general agreement with the data in the literature but also showed some differences. They were partially explained because of the higher accuracy of the new optimization strategy but it was also shown that the number of independent experimental stress-strain curves used as input is critical to reach an accurate solution to the inverse optimization problem. It was concluded that at least three independent stress-strain curves are necessary to determine the single crystal behavior from polycrystal tests in the case of highly textured Mg alloys.

Modelo para la gestión de la ordenación territorial en el Ecuador en el marco de su Constitución

Ecuador, país sudamericano, aprobó en el año 2008 una Constitución en la que subyace un modelo de desarrollo humano multidimensional y alternativo al vigente. Sus dimensiones sociales, económicas, políticas, culturales y ambientales se encuentran en los textos correspondientes a los “Derechos”, “Régimen de Desarrollo” y “Régimen del Buen Vivir”; en tanto que las dimensiones territoriales se hallan expuestas en la “Organización Territorial del Estado”, conformada por regiones, provincias, cantones y parroquias rurales, con sus respectivos gobiernos autónomos descentralizados, a los que la misma Constitución les atribuye, entre otras, las competencias exclusivas de “planificar el desarrollo” y “formular los correspondientes planes de ordenamiento territorial”, y al Estado central la “planificación nacional”. No obstante, el marco legal dictado posteriormente -que otorga al Estado central la competencia de ordenación territorial, mediante la “Estrategia Territorial Nacional”-, no logra regular con eficacia, efectividad y eficiencia este ejercicio competencial, incluyendo en esta condición a los lineamientos técnicos dictados por el organismo nacional de planificación; volviendo urgente la vigencia de una ley que lo asuma, pero que demanda previamente el diseño de un modelo de gestión de estas competencias, propósito al cual procura contribuir el presente trabajo. Su estructura es la siguiente: Capítulo 1: “La problemática, objetivos y antecedentes”, en cuya formulación se destaca el estudio del marco jurídico y técnico vigente en relación a la ordenación territorial, partiendo de una breve visión sobre los empeños previos en Ecuador por adoptarla, y que se complementa con una evaluación preliminar de la experiencia vivida por los gobiernos autónomos descentralizados al formular y gestionar sus primeros planes de desarrollo y de ordenación territorial, en acatamiento del mandato constitucional. Luego se avanza en la definición del objetivo general del trabajo y de un conjunto coherente de objetivos específicos. Concluye este capítulo con el análisis del estado de la cuestión: los antecedentes sobre la ordenación territorial en América Latina, en el marco de sus predecesoras históricas. Capítulo 2: “Diseño del modelo de gestión”, que se inicia con el planteamiento de la metodología a seguir, condicionada especialmente por los propios textos constitucionales que vinculan en la relación de “correspondencia” a la ordenación territorial con la planificación del desarrollo y en consecuencia con el ejercicio de las competencias sectoriales asignadas por ella misma a los diferentes niveles de gobierno. Efectivamente, tal relación supone básicamente que la planificación del desarrollo adquiera el carácter de global, total, vale decir integral, en el sentido de que igualmente contemple sus dimensiones territoriales y que la planificación de éstas se integre a la de las dimensiones sociales, económicas, políticas, culturales y ambientales, de manera tal que en cada uno de los niveles la planificación del desarrollo sea un proceso único y un todo. Por estas condiciones, el diseño en cuestión demanda el tratamiento previo de los aspectos contemplados por la metodología en relación con la conceptualización y ordenamiento de la planificación y gestión del modelo de desarrollo humano previsto por la Constitución para los distintos niveles territoriales, seguido del análisis y evaluación del reparto competencial. En este marco se diseña el modelo de gestión en siete componentes específicos que definen los objetivos estratégicos generales a los cuales apuntará la ordenación territorial, estructuran con sus figuras –los planes–, un sistema integrado de alcance nacional, entienden al propio territorio bajo una visión sistémica y proponen un esquema metodológico general para la redacción de tales instrumentos. Luego se aborda en calidad de tema clave, la articulación con la planificación del desarrollo, el establecimiento de las dimensiones territoriales sectoriales y globales de ordenación en cada nivel territorial, que posibilita a su vez la formulación de los contenidos de las determinaciones de los planes y la definición de un conjunto de lineamientos para su gestión. Capítulo 3. “Verificación”, que se ha concretado en la puesta a consideración de un selecto grupo de expertos nacionales en ordenación territorial, el modelo propuesto siguiendo los procedimientos recomendados para este tipo de consultas. Capítulo 4. “Conclusiones Generales”, esto es, un conjunto coherente de proposiciones que condensan los resultados alcanzados en los diferentes capítulos precedentes y que demuestran la validez del modelo propuesto. ABSTRACT Ecuador approved a constitution, by 2008, where a multidimensional human development model, different to the one in force, underlies. Its social, economic, political, cultural and environmental dimensions are at the entries for "Rights", "Development Scheme" and "Rules of Good Living"; while the territorial dimensions are given by the "Territorial Organization of the State" section, consisting of regions, provinces, cantons and rural parishes, with their respective autonomous governments, to which the Constitution conferred, inter alia, the exclusive powers of "development planning" and "land use plan formulation," while the central state has the "national planning" competence. However, the subsequent issued legal framework - which gives the central state competences over land planning, using the "National Spatial Strategy" - fails to effectively regulate this exercise of jurisdiction, including in this condition the technical guidelines dictated by the national planning agency; thus becoming urgent to put in force a law that assume it, which demands the previous design of a management model of these competences, which is the aim that seeks to contribute the present work. Its structure is as follows: Chapter 1: "The problem, objectives and background" that includes the study of the legal and technical framework in force in relation to land planning, starts with a brief overview of previous efforts to adopt it in Ecuador. The chapter is complemented with a preliminary assessment of the experience of the autonomous governments to formulate and manage their early development plans and land planning, in compliance with the constitutional mandate. Subsequently the overall objective of the work and a coherent set of objectives are defined. This chapter concludes with an analysis of the state of art: the history of land use planning in Latin America in the context of their historical predecessors. Chapter 2, "Design of a management model", which begins with the methodological approach to follow, conditioned by the constitutional texts linking the relationship of "correspondence" land planning with development planning and with the exercise of the sectorial competences assigned by itself to different levels of government. Indeed, such a relationship basically means that development planning should acquire a global, comprehensive, complete, total, character in the sense that it also provides for their territorial dimensions and that their planning is integrated to social, economic, political, cultural and environmental factors, so that in each of the levels, development planning is a unique process and a whole. For these conditions, the design in question demands pretreatment of the aspects covered by the methodology in relation to the conceptualization and management of the planning and management of human development model envisaged by the Constitution to the various territorial levels, followed by analysis and evaluation of the distribution of powers. In this framework a management model is designed into seven specific components that define the overall strategic objectives which aim to land planning, structure plans, and an integrated nationwide system, that understand the territory under a systemic vision and propose a general methodological framework to draft these instruments. Then a key issue is addressed, the coordination with development planning, the establishment of sectorial and regional and global dimensions of management at each territorial level, which in turn allows the formulation of the contents of the plans determinations and defining a set of management guidelines. Chapter 3, "Verification", It has traduced into asking for the revision of the proposed model by a select group of national experts in spatial planning by following recommended procedures for such queries. Chapter 4, "General Conclusions", a coherent set of propositions that summarize the results obtained in the different preceding chapters, which demonstrates the validity of the proposed model.