Deep crustal electromagnetic structure of Bhuj earthquake region (India) and its implications

The existence of fluids and partial melt in the lower crust of the seismically active Kutch rift basin (on the western continental margin of India) owing to underplating has been proposed in previous geological and geophysical studies. This hypothesis is examined using magnetotelluric (MT) data acquired at 23 stations along two profiles across Kutch Mainland Uplift and Wagad Uplift. A detailed upper crustal structure is also presented using twodimensional inversion of MT data in the Bhuj earthquake (2001) area. The prominent boundaries of reflection in the upper crust at 5, 10 and 20 km obtained in previous seismic reflection profiles correlate with conductive structures in our models. The MT study reveals 1-2 km thick Mesozoic sediments under the Deccan trap cover. The Deccan trap thickness in this region varies from a few meters to 1.5 km. The basement is shallow on the northern side compared to the south and is in good agreement with geological models as well as drilling information. The models for these profiles indicate that the thickness of sediments would further increase southwards into the Gulf of Kutch. Significant findings of the present study indicate 1) the hypocentre region of the earthquake is devoid of fluids, 2) absence of melt (that is emplaced during rifting as suggested from the passive seismological studies) in the lower crust and 3) a low resistive zone in the depth range of 5-20 km. The present MT study rules out fluidsand melt (magma) as the causative factors that triggered the Bhuj earthquake. The estimated porosity value of 0.02% will explain 100-500 ohm·m resistivity values observed in the lower crust. Based on the seismic velocities and geochemical studies, presence of garnet is inferred. The lower crust consists of basalts - probably generated by partial melting of metasomatised garnet peridotite at deeper depths in the lithosphere - and their composition might be modified by reaction with the spinel peridotites.

Initiation de l'adhésion leucocytaire : rôle des fucosyltransférases et des ligands des sélectines

RESUME La dissémination extramédullaire des cellules blastiques est une complication majeure des leucémies myéloïdes (LMA) ou lymphoïdes aiguës (LLA). La migration des cellules blastiques dépend de mécanismes semblables à ceux qui régulent la migration des leucocytes dans un site d'inflammation. Parmi ceux-ci, les oligosaccharides fucosylés décorant les ligands des sélectines jouent un rôle clé en interagissant avec les sélectines. PSGL-1 (P-Selectin Glycoprotein Ligand-1) est une protéine de 240 kD, exprimée à la surface des leucocytes, permettant de soutenir le roulement leucocytaire sur les sélectines, le long de la paroi vasculaire. L'interaction de PSGL-1 avec les sélectines nécessite des modifications post-traductionnelles de type sialylation, sulfatation , N et 0-glycosylation. Parmi les enzymes impliqués, les α1,3-fucosyltransférases jouent un rôle important dans la biosynthèse d'oligosaccharides fucosylés, ligands des sélectines (sLex, Lex, VIM-2, CLA). Comme l'expression des α1,3-fucosyltransférases par les cellules blastiques leucémiques n'a pas été étudiée précédemment, nous l'avons recherchée dans 120 cas de leucémies aiguës. Les ARNm des FucT-IV et -VII ont été détectés, par RT-PCR, dans tous les cas testés. L'ARNm de la FucT-IX n'a été observé que dans 40% des leucémies aiguës (48/120). L'ARNm de la FucT-IX est détecté dans 65% des LMA (47/72) et, moins fréquemment, dans 26% des LLA (11/42). A noter que les cas de LLA exprimant la FucT-IX correspondent essentiellement à des LLA secondaires à la transformation d'une leucémie myéloïde chronique ou des LLA de la lignée B de type leucémie/lymphome de Burkitt. L'expression de PSGL-1 et des oligosaccharides fucosylés par les blastes varie significativement parmi les LMA et les LLA : Lex, VIM-2 et sLex étant exprimés plus fréquemment par les myéloblastes que par les lymphoblastes. Le rôle des FucT-IV, -VII et -IX dans la synthèse des Lex, VIM-2, CLA et sLex a été examiné en exprimant l'ADNc de chaque FucT dans des cellules CHO. L'immunophénotypisation des transfectants indique que la FucT-VII synthétise sLex et CLA, mais pas Lex et VIM-2. Lex et VIM-2 sont générés par la FucT-IV. La FucT-IX ne participe qu'à la synthèse de Lex, sa capacité de synthèse de VIM-2 dans les cellules CHO est très faible. Le rôle de la FucT-IX dans la régulation du roulement cellulaire dépendant des sélectines a été testé dans des conditions de flux. Les vitesses de roulement des cellules CHO co-exprimant la FucT-LX, la core-2 01,6-N-acetylglucosaminyltransferase et PSGL-1 sont très élevées sur la P-sélectine (médiane : 497.95 µm/s, n=96) alors qu'elles sont beaucoup plus lentes sur la E-sélectine (médiane 7 µm/s, n=64). Les recrutements sur la E-sélectine des cellules CHO-C2F9PSGL¬1 et des CHO-C2F7PSGL-1 sont similaires (moyenne ± SEM : 127.44 ± 4.38 vs. 151.16 ± 3.16 cellules/min/mm2, n=5). Celui des cellules CHO-C2F4PSGL-1 est par contre plus faible (54.20 ± 2.13 cellules/min/mm2, n=5). Ces résultats indiquent que la FucT-IX est impliquée dans la biosynthèse de Lex, VIM-2 et CLA et qu'elle régule l'interaction des cellules CHO avec la E-sélectine. Contrairement aux FucT-IV et -VII, la FucT-IX ne joue qu'un rôle mineur dans la régulation du roulement cellulaire sur la L- et la P-sélectine. L'expression fréquente de la FucT-IX par les myéloblastes suggère qu'elle pourrait participer avec les FucT-IV et -VII à la régulation de la migration cellulaire dépendant de la E-sélectine. Finalement, ce travail de thèse a été étendu à l'identification des protéines cytoplasmiques qui interagissent avec le domaine cytoplasmique de PSGL-1 et qui pourraient être impliquées dans la transmission de signaux intracellulaires. Les ligands intracellulaires de PSGL-1 seront identifiés par la technique du double hybride qui nous a déjà permis de confirmer que syk et la N-moésine se lient au domaine cytoplasmique de PSGL-1. Des ligands supplémentaires seront identifiés employant une librairie provenant des cellules souches hématopoïétiques comme proie. ABSTRACT Blast cell dissemination is a major complication of acute myeloblastic (AML) and lymphoblastic leukemia (ALL). Blast cell migration is dependent on mechanisms that are similar to those which regulate leukocyte migration into inflammatory lesions. Among them, fticosylated oligosaccharides that decorate selectin ligands play a key role by interacting with selectins. PSGL-1 (P-Selectin Glycoprotein Ligand-1) is a 240 kD glycoprotein constitutively expressed on leucocytes and which supports leukocyte rolling on selectins. PSGL-1 interaction with selectins is dependent on post-translational modifications such as sialylation, sulfation, N- and 0-glycosylation. Among the involved enzymes, the α1,3-fucosyltransferases (FucT) play a major role in generating cell surface glycoconjugates carrying fucosylated oligosaccharides which interact with selectins (sLex, Lex, VIM-2, CLA). Since no information is available on the expression of α1,3-fucosyltransferases by leukemic blast cells, we examined it in 120 cases of acute leukemia. FucT-IV and -VII mRNAs were detected, by RT-PCR, in all tested cases. In contrast, the presence of FucT-IX mRNA was shown in only 40% of patients with acute leukemia (48/120). FucT-IX mRNA was detected in 65% of AML (47/72) and, less frequently, in 26% of ALL (11/42). Importantly, all ALL cases expressing FucT-IX were either secondary leukemia resulting from the transformation of chronic myelocytic leukemia in acute lymphoblastic leukemia or mature B-ALL (FAB L3 subtype or Burkitt lymphoma/leukemia according to WHO classification). FucT-IX was not detected in precursor B or T-ALL. The expression of PSGL-1 and fucosylated epitopes was significantly different among AML and ALL, Lex, VIM-2 and sLex being more frequently expressed by myeloblasts than by lymphoblasts. The role of FucT-IV, -VII and -IX in the biosynthesis of Lex, VIM-2, CLA and sLex was examined by expressing the cDNA of each α1,3-FucT in CHO cells. Immunophenotypic analysis of CHO transfectants indicated that FucT-VII synthesizes sLex and CLA but not Lex or VIM-2. Lex and CLA were generated by both FucT-IV and -IX. FucT-IV and FucT-IX differed in their ability to synthesize VIM-2, FucT-IX being less efficient than FucT-IV. The role of FucT-IX in regulating selectin-dependent rolling was assessed under hydrodynamic flow conditions. P-selectin-dependent interactions were transient and occurred at high velocities (median: 497.95 1,µm/s, n=96). In contrast, much slower rolling velocities were observed on E-selectin (median: 7 µm/s, n=64). The recruitment of CHO-C2F9PSGL-1 and CHO-C2F7PSGL-1 cells was similar on E-selectin (mean ± SEM: 127.44 ± 4.38, n=5 vs 151.16 ± 3.16 cells/min/mm2, n=5). In the other hand, CHO-C2F4PSGL-1 cells were less efficiently recruited on E-selectin (54.20 ± 2.13 cells/min/mm2, n=5). This results indicate that FucT-IX is involved in the biosynthesis of Lex, VIM-2 and CLA and that it confers E-selectin binding activity to CHO cells. By contrast to FucT-IV and -VII, FucT-IX had a minor role in regulating P- and L-selectin-dependent rolling on CHO transfectants. The frequent expression of FucT-IX in myeloblasts suggests that it may participate with FucT-IV and -VII in regulating E-selectin-dependent cell migration into tissues. Finally, this thesis work was extended to the identification of the cytoplasmic proteins interacting with cytoplasmic domain of PSGL-1 that may be involved in transducing intracellular signals. We planned to identify these intracellular ligands of PSGL-1 by using the double hybrid technique and already confirmed that syk and N-moesin bind to the cytoplasmic domain of PSGL-1. Additional PSGL-1 ligands will be sought by the same technique using a CD34+ stem cell library as pray. RESUME DESTINE A UN LARGE PUBLIC : L'adhésion et la migration leucocytaire sont nécessaires à de nombreux processus cellulaires comme la régulation de l'hématopoïèse, mais aussi dans la pathogenèse de l'artériosclérose, des maladies inflammatoires et de la métastatisation des cellules cancéreuses. Les molécules impliquées constituent depuis peu des cibles pour la thérapie du cancer. La migration leucocytaire vers un site d'inflammation dépend de mécanismes complexes, se déroulant en plusieurs étapes, nécessitant l'interaction séquentielle de molécules d'adhésion leucocytaires et endothéliales. Ainsi, chronologiquement, suite à un stimulus inflammatoire, les leucocytes « roulent » sur les cellules endothéliales, sont activées, s'arrêtent et traversent la paroi endothéliale (diapédèse) pour migrer dans les tissus environnants inflammés selon un gradient chimiotactique. La première étape de roulement met en jeu deux molécules principales : PSGL-1 (P-Sélectine Glycoprotéine Ligand-1) du coté des leucocytes et les sélectines du coté de l'endothélium de la paroi vasculaire. L'interaction entre ces deux molécules nécessite des décorations de ces protéines par des sucres, des résidus sulfates et des acides sialiques. Le sucre essentiel à la liaison demeure le fucose qui est attaché aux protéines grâce à des enzymes de la famille des fucosyltransferases. Actuellement, neuf fucosyltransférases humaines ont été identifiées et désignées sous FucT-I à IX. La FucT-IX, dernière fucosyltransférase clonée, a un faible degré d'homologie avec les autres fucosyltransférases mais sa séquence est extrêmement conservée entre les espèces. Ceci traduit son importance par une forte résistance à la pression évolutive. L'examen de son expression au sein de 120 cas de leucémies aiguës a mis en évidence son comportement atypique. En effet, alors que les autres FucTs sont toujours présentes, la FucT¬IX ne s'exprime que dans un cas sur deux en moyenne avec une préférence plus importante pour les leucémies myéloïdes. Ainsi, une étude plus approfondie de cet enzyme à mis en évidence sa capacité à induire une interaction cellulaire plus spécifique de la E-sélectine. Elle décore non seulement des protéines de surface, mais aussi certainement les glycolipides constituant la membrane cellulaire.

Construction and Evaluation of Submerged Vanes for Stream Control, HR-274, 1988

The objective of this study was to determine the practicality and effectiveness of using submerged vanes ("Iowa Vanes") to control bank erosion in a bend of East Nishnabotna River, Iowa. The vane system was constructed during the summer of 1985. It functions by eliminating, or reducing, the centrifugally induced helical motion of the flow in the bend, which is the root cause of bank undermining. The system was monitored over a 2-year period, from September 1985 to October 1987. Two surveys were conducted in the spring of 1986 in which data were taken of depths and velocities throughout the bend and of water-surface slope. The movement of the bank was determined from aerial photos and from repeated measurements of the vane-to-bank distance. The bankfull scour depths and velocities along the bank have been reduced significantly; and the movement of the bank has been stopped or considerably reduced. The improvements were obtained without changing the energy slope of the channel. Areas of design improvements were identified.

Changes in cerebral compartmental compliances during mild hypocapnia in patients with traumatic brain injury.

The benefit of induced hyperventilation for intracranial pressure (ICP) control after severe traumatic brain injury (TBI) is controversial. In this study, we investigated the impact of early and sustained hyperventilation on compliances of the cerebral arteries and of the cerebrospinal (CSF) compartment during mild hyperventilation in severe TBI patients. We included 27 severe TBI patients (mean 39.5 ± 3.4 years, 6 women) in whom an increase in ventilation (20% increase in respiratory minute volume) was performed during 50 min as part of a standard clinical CO(2) reactivity test. Using a new mathematical model, cerebral arterial compliance (Ca) and CSF compartment compliance (Ci) were calculated based on the analysis of ICP, arterial blood pressure, and cerebral blood flow velocity waveforms. Hyperventilation initially induced a reduction in ICP (17.5 ± 6.6 vs. 13.9 ± 6.2 mmHg; p < 0.001), which correlated with an increase in Ci (r(2) = 0.213; p = 0.015). Concomitantly, the reduction in cerebral blood flow velocities (CBFV, 74.6 ± 27.0 vs. 62.9 ± 22.9 cm/sec; p < 0.001) marginally correlated with the reduction in Ca (r(2) = 0.209; p = 0.017). During sustained hyperventilation, ICP increased (13.9 ± 6.2 vs. 15.3 ± 6.4 mmHg; p < 0.001), which correlated with a reduction in Ci (r(2) = 0.297; p = 0.003), but no significant changes in Ca were found during that period. The early reduction in Ca persisted irrespective of the duration of hyperventilation, which may contribute to the lack of clinical benefit of hyperventilation after TBI. Further studies are needed to determine whether monitoring of arterial and CSF compartment compliances may detect and prevent an adverse ischemic event during hyperventilation.

Flujos de detritos recientes en la cordillera frontal de Mendoza: Un ejemplo de riesgo natural en la ruta 7 = Recent debris flows in the Frontal Cordillera of Mendoza: An example of natural risk on the Road 7

In this paper is presented a study dealing with the debris flows that reached the national road 7 in January 2005, in the km 1,118.5, Mendoza province. The area is located in the Frontal Cordillera near the limit of the Precordillera. A detailed geomorphologic map has been realized for this study using a Quickbird satellite imagery of the year 2006. Various calculations of volumes, velocities and peak discharges have been performed with the field data and using a geographic information system (GIS). The geomorphologic survey has permitted to propose three propagation scenarios in case of a new event. These allowed creating a map of debris flows susceptibility for the stretch of the road that has been studied. Finally, it has been proposed protection and mitigation measures, based on the results of the study, to protect the road from a new event.

Modelling hydrodynamics in the Rio Parana, Argentina : an evaluation and inter-comparison of reduced-complexity and physics based models applied to a large sand-bed river

Depth-averaged velocities and unit discharges within a 30 km reach of one of the world's largest rivers, the Rio Parana, Argentina, were simulated using three hydrodynamic models with different process representations: a reduced complexity (RC) model that neglects most of the physics governing fluid flow, a two-dimensional model based on the shallow water equations, and a three-dimensional model based on the Reynolds-averaged Navier-Stokes equations. Row characteristics simulated using all three models were compared with data obtained by acoustic Doppler current profiler surveys at four cross sections within the study reach. This analysis demonstrates that, surprisingly, the performance of the RC model is generally equal to, and in some instances better than, that of the physics based models in terms of the statistical agreement between simulated and measured flow properties. In addition, in contrast to previous applications of RC models, the present study demonstrates that the RC model can successfully predict measured flow velocities. The strong performance of the RC model reflects, in part, the simplicity of the depth-averaged mean flow patterns within the study reach and the dominant role of channel-scale topographic features in controlling the flow dynamics. Moreover, the very low water surface slopes that typify large sand-bed rivers enable flow depths to be estimated reliably in the RC model using a simple fixed-lid planar water surface approximation. This approach overcomes a major problem encountered in the application of RC models in environments characterised by shallow flows and steep bed gradients. The RC model is four orders of magnitude faster than the physics based models when performing steady-state hydrodynamic calculations. However, the iterative nature of the RC model calculations implies a reduction in computational efficiency relative to some other RC models. A further implication of this is that, if used to simulate channel morphodynamics, the present RC model may offer only a marginal advantage in terms of computational efficiency over approaches based on the shallow water equations. These observations illustrate the trade off between model realism and efficiency that is a key consideration in RC modelling. Moreover, this outcome highlights a need to rethink the use of RC morphodynamic models in fluvial geomorphology and to move away from existing grid-based approaches, such as the popular cellular automata (CA) models, that remain essentially reductionist in nature. In the case of the world's largest sand-bed rivers, this might be achieved by implementing the RC model outlined here as one element within a hierarchical modelling framework that would enable computationally efficient simulation of the morphodynamics of large rivers over millennial time scales. (C) 2012 Elsevier B.V. All rights reserved.

Solid-phase microextraction as short-term sampling technique for BTEX occupational exposure

Solid phase microextraction (SPME) has been widely used for many years in various applications, such as environmental and water samples, food and fragrance analysis, or biological fluids. The aim of this study was to suggest the SPME method as an alternative to conventional techniques used in the evaluation of worker exposure to benzene, toluene, ethylbenzene, and xylene (BTEX). Polymethylsiloxane-carboxen (PDMS/CAR) showed as the most effective stationary phase material for sorbing BTEX among other materials (polyacrylate, PDMS, PDMS/divinylbenzene, Carbowax/divinylbenzene). Various experimental conditions were studied to apply SPME to BTEX quantitation in field situations. The uptake rate of the selected fiber (75 μm PDMS/CAR) was determined for each analyte at various concentrations, relative humidities, and airflow velocities from static (calm air) to dynamic (>200 cm/s) conditions. The SPME method also was compared with the National Institute of Occupational Safety and Health method 1501. Unlike the latter, the SPME approach fulfills the new requirement for the threshold limit value-short term exposure limit (TLV-STEL) of 2.5 ppm for benzene (8 mg/m3).

08023-013 DMACC Lake Final Report

The DMACC Lake Watershed Improvement project will focus on water quality and quantity as well as channel and lake restoration. Roadway, parking lot, and roof drainage from the west and northwest portions of the campus add significant amounts of pollutants and silt to the lake. Severe channel erosion exists along the northern creek channel with exposed cut banks ranging from 2-10 feet in height devoid of vegetation. Heavy lake sedimentation and algae blooms are a result of accumulated sediment being conveyed to the lake. Most sections of the north channel have grades of between 0.5% and 1%. This channel receives large scouring flow velocities. There are no natural riffle or pool systems. There are five areas where these riffle and pool systems may need to be created in order to slow overall channel velocities. This will create a series of rock riffles and a still pool that will mimic the conditions that natural channels tend to create, protecting the channel from undercutting. Multiple practices will need to be implemented to address the pollutant, silt, and channel erosion. Improvements will be specifically tailored to address problems observed within the north channel, on-site drainage from the west and northwest, as well as off-site drainage to the north of the campus and east of Ankeny Blvd (Hwy 69). The result will be improved quality and quantity of site drainage and a channel with a more natural appearance and reduced scour velocities. Sections of the north channel will require grading to establish slopes that can support deep rooted vegetation and to improve maintenance access. Areas with eroded banks will require slope pull back and may also require toe armor protection to stabilize. A constructed wetland will collect and treat runoff from the west on site parking lot, before being discharged into the lake. This project will create educational opportunities to both students and the general public as well as interested parties outside of the local area for how an existing system can be retro fitted for improved watershed quality.

The effect of mountain bike suspensions on vibrations and off-road uphill performance.

AIM: This study evaluates the effect of front suspension (FS) and dual suspension (DS) mountain-bike on performance and vibrations during off-road uphill riding. METHODS: Thirteen male cyclists (27+/-5 years, 70+/-6 kg, VO(2max)59+/-6 mL.kg(-1).min(-1), mean+/-SD) performed, in a random sequence, at their lactate threshold, an off-road uphill course (1.69 km, 212 m elevation gain) with both type of bicycles. Variable measured: a) VO(2) consumption (K4b2 analyzer, Cosmed), b) power output (SRM) c) gain in altitude and d) 3-D accelerations under the saddle and at the wheel (Physilog, EPFL, Switzerland). Power spectral analy- sis (Fourier) was performed from the vertical acceleration data. RESULTS: Respectively for the FS and DS mountain bike: speed amounted to 7.5+/-0.7 km.h(-1) and 7.4+/-0.8 km.h(-1), (NS), energy expenditure 1.39+/-0.16 kW and 1.38+/-0.18, (NS), gross efficiency 0.161+/-0.013 and 0.159+/-0.013, (NS), peak frequency of vibration under the saddle 4.78+/-2.85 Hz and 2.27+/-0.2 Hz (P<0.01) and median-frequency of vertical displacements of the saddle 9.41+/-1.47 Hz and 5.78+/-2.27 Hz (P<0.01). CONCLUSION: Vibrations at the saddle level of the DS bike are of low frequencies whereas those of the FS bike are mostly of high frequencies. In the DS bike, the torque produced by the cyclist at the pedal level may generate low frequency vibrations. We conclude that the DS bike absorbs more high frequency vibrations, is more comfortable and performs as well as the FS bicycle.

Short and longterm ocular vascular effects after intravitreal injection of ranibizumab for neovascular age-related macular degeneration

Purpose: To investigate the effect of the first and repeated intravitreal injections of ranibizumab (1.25mg; 0.05ml) on retrobulbar blood flow velocities in patients with wet age-related macular degeneration (AMD). Methods: This prospective non randomized study included twenty consecutive AMD patients. Time- averaged mean blood flow velocities (BFVs) in the central retinal, temporal posterior ciliary and ophthalmic arteries (CRA, TPCA and OA) were measured by ultrasound imaging before, 2 days and 3 weeks after the first injection of ranibizumab, then 6 months after supplemental monthly injections if required. At each visit, complete ophthalmological examination was performed, including best corrected visual acuity measurement according to ETDRS protocol and OCT. Results: In the treated eyes, ranibizumab injection was followed by a significant improvement in visual acuity (from 44.4 ± 21.7, to 50.9±25.9 (p<0.01) at month 6, and a decrease in mean central macular thickness from 377±115 to 267 ± 74 µm (p<0.001) at month 6. At day 2 mean BFVs decreased by 16% in the CRA and by 20% in TPCA (p<0.001, both), then remained stable. Mean BFVs did not change in OA at the day 2 but decreased at week 3 by 18% (p<0.001). Supplemental injections did not lead to additional effects at month 6. No effect was tabulated in the fellow eye. Conclusions: We report an early decrease in mean BFV in CRA and TPRA following intravitreal injections of ranibizumab corresponding to vasoconstrictive effect of this drug. Decrease in mean BFV in all retrobulbar arteries from the week 3 suggests that ranibizumab proceeds to a local and regional vasoconstrictive and antiangiogenic effects after local diffusion. Thus, ranibizumab could induce an actual hypoperfusion of the treated eye which could correspond to a vascular side effect.

Transcranial Doppler Pulsatility Index: What it is and What it Isn't.

BACKGROUND: Transcranial Doppler (TCD) pulsatility index (PI) has traditionally been interpreted as a descriptor of distal cerebrovascular resistance (CVR). We sought to evaluate the relationship between PI and CVR in situations, where CVR increases (mild hypocapnia) and decreases (plateau waves of intracranial pressure-ICP). METHODS: Recordings from patients with head-injury undergoing monitoring of arterial blood pressure (ABP), ICP, cerebral perfusion pressure (CPP), and TCD assessed cerebral blood flow velocities (FV) were analyzed. The Gosling pulsatility index (PI) was compared between baseline and ICP plateau waves (n = 20 patients) or short term (30-60 min) hypocapnia (n = 31). In addition, a modeling study was conducted with the "spectral" PI (calculated using fundamental harmonic of FV) resulting in a theoretical formula expressing the dependence of PI on balance of cerebrovascular impedances. RESULTS: PI increased significantly (p < 0.001) while CVR decreased (p < 0.001) during plateau waves. During hypocapnia PI and CVR increased (p < 0.001). The modeling formula explained more than 65% of the variability of Gosling PI and 90% of the variability of the "spectral" PI (R = 0.81 and R = 0.95, respectively). CONCLUSION: TCD pulsatility index can be easily and quickly assessed but is usually misinterpreted as a descriptor of CVR. The mathematical model presents a complex relationship between PI and multiple haemodynamic variables.

Lexan Gate Arm, HR-536, 1987

Innovative Rail Ltd. of Cedar Rapids, Iowa produced a new rail/highway crossing gate arm that shows promise in two areas: a. Minimizing arm breakage, and b. Added target value to motorists. The new gate was demonstrated to the Chicago and North Western Transportation Company, and that railroad has requested its use at two crossings on an "experimental basis" to determine if its installation provides relief in those areas. On April 18, 1986, the Department observed a test of the material under field conditions with the Transportation Company. The gate received four mid-center strikes at 5 MPH by a company truck while in the lowered position, and showed no damage. In a fifth mid-center strike at 15 MPH, the gate was visibly damaged at the connection to its raising mechanism, but continued to function though at a 5-10 degree drop. Several pictures of the gate and its saddle mechanism are shown in Appendix A of this report. Innovative Rail established distributorships in the United States and Canada, and has since gone out of business.

Crustal structure and reflectivity of the Swiss Alps from 3-Dimensional seismic modeling. 2. Penninic Nappes

Surface geological mapping, laboratory measurements of rock properties, and seismic reflection data are integrated through three-dimensional seismic modeling to determine the likely cause of upper crustal reflections and to elucidate the deep structure of the Penninic Alps in eastern Switzerland. Results indicate that the principal upper crustal reflections recorded on the south end of Swiss seismic line NFP20-EAST can be explained by the subsurface geometry of stacked basement nappes. In addition, modeling results provide improvements to structural maps based solely on surface trends and suggest the presence of previously unrecognized rock units in the subsurface. Construction of the initial model is based upon extrapolation of plunging surface. structures; velocities and densities are established by laboratory measurements of corresponding rock units. Iterative modification produces a best fit model that refines the definition of the subsurface geometry of major structures. We conclude that most reflections from the upper 20 km can be ascribed to the presence of sedimentary cover rocks (especially carbonates) and ophiolites juxtaposed against crystalline basement nappes. Thus, in this area, reflections appear to be principally due to first-order lithologic contrasts. This study also demonstrates not only the importance of three-dimensional effects (sideswipe) in interpreting seismic data, but also that these effects can be considered quantitatively through three-dimensional modeling.

Gravity-driven slug motion in capillary tubes

The velocity of a liquid slug falling in a capillary tube is lower than predicted for Poiseuille flow due to presence of menisci, whose shapes are determined by the complex interplay of capillary, viscous, and gravitational forces. Due to the presence of menisci, a capillary pressure proportional to surface curvature acts on the slug and streamlines are bent close to the interface, resulting in enhanced viscous dissipation at the wedges. To determine the origin of drag-force increase relative to Poiseuille flow, we compute the force resultant acting on the slug by integrating Navier-Stokes equations over the liquid volume. Invoking relationships from differential geometry we demonstrate that the additional drag is due to viscous forces only and that no capillary drag of hydrodynamic origin exists (i.e., due to hydrodynamic deformation of the interface). Requiring that the force resultant is zero, we derive scaling laws for the steady velocity in the limit of small capillary numbers by estimating the leading order viscous dissipation in the different regions of the slug (i.e., the unperturbed Poiseuille-like bulk, the static menisci close to the tube axis and the dynamic regions close to the contact lines). Considering both partial and complete wetting, we find that the relationship between dimensionless velocity and weight is, in general, nonlinear. Whereas the relationship obtained for complete-wetting conditions is found in agreement with the experimental data of Bico and Quere [J. Bico and D. Quere, J. Colloid Interface Sci. 243, 262 (2001)], the scaling law under partial-wetting conditions is validated by numerical simulations performed with the Volume of Fluid method. The simulated steady velocities agree with the behavior predicted by the theoretical scaling laws in presence and in absence of static contact angle hysteresis. The numerical simulations suggest that wedge-flow dissipation alone cannot account for the entire additional drag and that the non-Poiseuille dissipation in the static menisci (not considered in previous studies) has to be considered for large contact angles.

Shoulder pathology: estimating dominant upper-limb activity using 3D kinematic sensors.

Introduction. Quantification of daily upper-limb activity is a key determinant in evaluation of shoulder surgery. For a number of shoulder diseases, problem in performing daily activities have been expressed in terms of upper-limb usage and non-usage. Many instruments measure upper-limb movement but do not focus on the differentiations between the use of left or right shoulder. Several methods have been used to measure it using only accelerometers, pressure sensors or video-based analysis. However, there is no standard or widely used objective measure for upper-limb movement. We report here on an objective method to measure the movement of upper-limb and we examined the use of 3D accelerometers and 3D gyroscopes for that purpose. Methods. We studied 8 subjects with unilateral pathological shoulder (8 rotator cuff disease: 53 years old ± 8) and compared them to 18 control subjects (10 right handed, 8 left handed: 32 years old ± 8, younger than the patient group to be almost sure they don_t have any unrecognized shoulder pathology). The Simple Shoulder Test (SST) and Disabilities of the Arm and Shoulder Score (DASH) questionnaires were completed by each subject. Two modules with 3 miniature capacitive gyroscopes and 3 miniature accelerometers were fixed by a patch on the dorsal side of the distal humerus, and one module with 3 gyroscopes and 3 accelerometers were fixed on the thorax. The subject wore the system during one day (8 hours), at home or wherever he/she went. We used a technique based on the 3D acceleration and the 3D angular velocities from the modules attached on the humerus. Results. As expected, we observed that for the stand and sit postures the right side is more used than the left side for a healthy right-handed person(idem on the left side for a healthy left-handed person). Subjects used their dominant upper-limb 18% more than the non-dominant upper-limb. The measurements on patients in daily life have shown that the patient has used more his non affected and non dominant side during daily activity if the dominant side = affected shoulder. If the dominant side affected shoulder, the difference can be showed only during walking period. Discussion-Conclusion. The technique developed and used allowed the quantification of the difference between dominant and non dominant side, affected and unaffected upper-limb activity. These results were encouraging for future evaluation of patients with shoulder injuries, before and after surgery. The feasibility and patient acceptability of the method using body fixed sensors for ambulatory evaluation of upper limbs kinematics was shown.