Remote control of the activity of a Pt catalyst supported on a mixed ionic electronic conducting membrane

A novel configuration for the in situ control of the catalytic activity of a polycrystalline Pt catalyst supported on a mixed ionic electronic conducting (MIEC) substrate is investigated. The modification of the catalytic activity is achieved by inducing the reverse spillover of oxygen promoting species from the support onto the catalyst surface, thus modifying the chemisorptive bond energy of the gas phase adsorbed reactants. This phenomenon is known as Electrochemical Promotion of Catalysis (EPOC). In this work we investigate the use of a wireless system that takes advantage of the mixed ionic electronic conductivity of the catalyst support (internally short-circuiting the system) in a dual chamber reactor. In this wireless configuration, the reaction takes place in one chamber of the membrane reactor while introduction of the promoting species is achieved by the use of an appropriate sweep gas (and therefore control of the oxygen chemical potential difference across the membrane) on the other chamber. Experimental results have shown that the catalytic rate can be enhanced by using an oxygen sweep, while a hydrogen sweep can reverse the changes. Total rate enhancement ratios of up to 3.5 were measured. © 2008 Elsevier B.V. All rights reserved.

Supervisor Continuity or Co-Location: Which Matters in Residency Education? Findings From a Qualitative Study of Remote Supervisor Family Physicians in Australia and Canada

Purpose: Changes to health care systems andworking hours have fragmentedresidents’ clinical experiences withpotentially negative effects ontheir development as professionals.Investigation of off-site supervision,which has been implemented in isolatedrural practice, could reveal importantbut less overt components of residencyeducation. 

Method: Insights from sociocultural learningtheory and work-based learning provideda theoretical framework. In 2011–2012,16 family physicians in Australia andCanada were asked in-depth how theyremotely supervised residents’ workand learning, and for their reflectionson this experience. The verbatiminterview transcripts and researchers’memos formed the data set. Templateanalysis produced a description andinterpretation of remote supervision. 

Results: Thirteen Australian family physiciansfrom five states and one territory, andthree Canadians from one province,participated. The main themes werehow remoteness changed the dynamicsof care and supervision; the importanceof ongoing, holistic, nonhierarchical,supportive supervisory relationships; andthat residents learned “clinical courage”through responsibility for patients’ careover time. Distance required supervisorsto articulate and pass on their expertiseto residents but made monitoringdifficult. Supervisory continuityencouraged residents to build on pastexperiences and confront deficiencies. 

Conclusions: Remote supervision enabled residents todevelop as clinicians and professionals.This questions the supremacy of co-locationas an organizing principle forresidency education. Future specialists maybenefit from programs that give themongoing and increasing responsibilityfor a group of patients and supportive.

Combining sampling, profiling, remote sensing and modelling to efficiently monitoring estuarine and coastal water quality

Monitoring of coastal and estuarine water quality has been traditionally performed by sampling with subsequent laboratory analysis. This has the disadvantages of low spatial and temporal resolution and high cost. In the last decades two alternative techniques have emerged to overcome this drawback: profiling and remote sensing. Profiling using multi-parameter sensors is now in a commercial stage. It can be used, tied to a boat, to obtain a quick “picture” of the system. The spatial resolution thus increases from single points to a line coincident with the boat track. The temporal resolution however remains unchanged since campaigns and resources involved are basically the same. The need for laboratory analysis was reduced but not eliminated because parameters like nutrients, microbiology or metals are still difficult to obtain with sensors and validation measurements are still needed. In the last years the improvement in satellite resolution has enabled its use for coastal and estuarine water monitoring. Although spatial coverage and resolution of satellite images in the present is already suitable to coastal and estuarine monitoring, temporal resolution is naturally limited to satellite passages and cloud cover. With this panorama the best approach to water monitoring is to integrate and combine data from all these sources. The natural tools to perform this integration are numerical models. Models benefit from the different sources of data to obtain a better calibration. After calibration they can be used to extend spatially and temporally the methods resolution. In Algarve (South of Portugal) a monitoring effort using this approach is being undertaken. The monitoring effort comprises five different locations including coastal waters, estuaries and coastal lagoons. The objective is to establish the base line situation to evaluate the impact of Waste Water Treatment Plants design and retrofitting. The field campaigns include monthly synoptic profiling, using an YSI 6600 multi-parameter system, laboratory analysis and fixed stations. The remote sensing uses ENVISAT\MERIS Level 2 Full Resolution data. This data is combined and used with the MOHID modelling system to obtain an integrate description of the systems. The results show the limitations of each method and the ability of the modelling system to integrate the results and to produce a comprehensive picture of the system.

Remote data acquisition system of environmental data

The implementation of an accurate and reliable data acquisition system is the first step to develope a good control system. This data acquisition should provide valuable data readings, not only for control purposes but also for applications in different research areas.

Theoretical and Experimental Foundations for the Greystar Project. Or application of NAA for remote detection

Dans un monde de détection et prospection minière, une multitude de techniques existent. Une des techniques les plus puissantes est l’activation par neutrons (NAA et PGAA). Toutefois, dans le cadre de la prospection minière, l’utilisation de cette technique nécessite du forage. La motivation du projet GREYSTAR est de permettre l’analyse élémentaire par activation en limitant l’impact environnemental. Les facteurs limitant sont l’activation d’un volume distant et la détection de la radiation émise par ce volume. Ce mémoire examine l’activation par neutrons thermiques et la détection de gammas provenant de la désexcitation des noyaux activés. Une approche expérimentale est présentée avec des simulations pour venir appuyer les données expérimentales. Il en résulte que le projet GREYSTAR tel que décrit dans ce mémoire est prometteur et que davantage de recherche est à prescrire. Les résultats initiaux indiquent que selon le prototype proposé, les limites de détections sont de l’ordre de 2-3 m dans un matériel semblable au granite. On conclut que d’un point de vue de prospection minière, il est intéressant de poursuivre la recherche. De plus, plusieurs autres applications dans les domaines militaire, civil et policier sont prometteuses.

The First Year Experience of Occupational Therapy Students at an Australian Regional University: Promoting Student Retention and Developing a Regional and Remote Workforce

Abstract Objective: Student retention at regional universities is important in addressing regional and remote workforce shortages. Students attending regional universities are more likely to work in regional areas. First year experience at university plays a key role in student retention. This study aimed to explore factors influencing the first year experience of occupational therapy students at a regional Australian university. Design: Surveys were administered to 58 second year occupational therapy students in the first week of second year. Data were analysed using descriptive statistics, inferential statistics (Pearson χ2; Spearman rho) and summarising descriptive responses. Setting: An Australian regional university. Participants: Second year undergraduate occupational therapy students. Main outcome measures: Factors influencing students’ decisions to study and continue studying occupational therapy; factors enhancing first year experience of university. Results: Fifty-four students completed the survey (93.1%). A quarter (25.9%) of students considered leaving the course during the first year. The primary influence for continuing was the teaching and learning experience. Most valued supports were orientation week (36.7%) and the first year coordinator (36.7%). Conclusion: The importance of the first year experience in retaining occupational therapy students is highlighted. Engagement with other students and staff and academic support are important factors in facilitating student retention. It is important to understand the unique factors influencing students’ decisions, particularly those from regional and remote areas, to enter and continue in tertiary education to assist in implementing supports and strategies to improve student retention.

An integrated reusable remote laboratory to complement electronics teaching

The great majority of the courses on science and technology areas where lab work is a fundamental part of the apprenticeship was not until recently available to be taught at distance. This reality is changing with the dissemination of remote laboratories. Supported by resources based on new information and communication technologies, it is now possible to remotely control a wide variety of real laboratories. However, most of them are designed specifically to this purpose, are inflexible and only on its functionality they resemble the real ones. In this paper, an alternative remote lab infrastructure devoted to the study of electronics is presented. Its main characteristics are, from a teacher's perspective, reusability and simplicity of use, and from a students' point of view, an exact replication of the real lab, enabling them to complement or finish at home the work started at class. The remote laboratory is integrated in the Learning Management System in use at the school, and therefore, may be combined with other web experiments and e-learning strategies, while safeguarding security access issues.

Remote experimentation network - yielding an inter-university peer-to-peer e-service

The goal of this paper is to discuss the benefits and challenges of yielding an inter-continental network of remote laboratories supported and used by both European and Latin American Institutions of Higher Education. Since remote experimentation, understood as the ability to carry out real-world experiments through a simple Web browser, is already a proven solution for the educational community as a supplement to on-site practical lab work (and in some cases, namely for distance learning courses, a replacement to that work), the purpose is not to discuss its technical, pedagogical, or economical strengths, but rather to raise and try to answer some questions about the underlying benefits and challenges of establishing a peer-to-peer network of remote labs. Ultimately, we regard such a network as a constructive mechanism to help students gain the working and social skills often valued by multinational/global companies, while also providing awareness of local cultural aspects.

Using remote experimentation in a large undergraduate course: initial findings

The use of remote labs in undergraduate courses has been reported in literature several times since the mid 90's. Nevertheless, very few articles present results about the correspondent learning gains obtained by students, and in what conditions those systems can be more efficient, thus suggesting a lack of data concerning their pedagogical effectiveness. This paper addresses such a gap by presenting some initial findings concerning the use of a remote lab (VISIR), in a large undergraduate course on Physics, with over 550 students enrolled.

Using test infrastructures for (remote) online evaluation of the sensitivity to SEUs of FPGAs

This paper proposes an online mechanism that can evaluate the sensitivity of single event upsets (SEUs) of field programmable gate arrays (FPGAs). The online detection mechanism cyclically reads and compares the values form the external and internal configuration memories, taking into account the mask information. This remote detection method also signals any mismatch as a result of a SEU that affects both used and not-used FPGA parts, which maximizes the monitored area. By utilizing an external, Web-accessible controller that is connected to the test infrastructure, the possibility of running the same operation in a remote manner is enabled. Moreover, the need for a local memory to store the mask values is also eliminated.

Adapting remote labs to learning scenarios: case studies using VISIR and RemotElectLab

Remote laboratories are an emergent technological and pedagogical tool at all education levels, and their widespread use is an important part of their own improvement and evolution. This paper describes several issues encountered on laboratorial classes, on higher education courses, when using remote laboratories based on PXI systems, either using the VISIR system or an alternate in-house solution. Three main issues are presented and explained, all reported by teachers, that gave support to students' use of remote laboratories. The first issue deals with the need to allow students to select the actual place where an ammeter is to be inserted on electric circuits, even incorrectly, therefore emulating real-world difficulties. The second one deals with problems with timing when several measurements are required at short intervals, as in the discharge cycle of a capacitor. In addition, the last issue deals with the use of a multimeter in dc mode when reading ac values, a use that collides with the lab settings. All scenarios are presented and discussed, including the solution found for each case. The conclusion derived from the described work is that the remote laboratories area is an expanding field, where practical use leads to improvement and evolution of the available solutions, requiring a strict cooperation and information-sharing between all actors, i.e., developers, teachers, and students.

IX International conference on Remote Engineering and Virtual instrumentation REV 2012

THE ninth edition of the International Conference on Remote Engineering and Virtual Instrumentation (REV) [1] was held at the Faculty of Engineering of the University of Deusto, Bilbao (Spain), from the 4th to the 6th of July, 2012. A world-class research community in the subject of remote and virtual laboratories joined the event.

A mobile robot platform for open learning based on serious games and remote laboratories

Within the pedagogical community, Serious Games have arisen as a viable alternative to traditional course-based learning materials. Until now, they have been based strictly on software solutions. Meanwhile, research into Remote Laboratories has shown that they are a viable, low-cost solution for experimentation in an engineering context, providing uninterrupted access, low-maintenance requirements, and a heightened sense of reality when compared to simulations. This paper will propose a solution where both approaches are combined to deliver a Remote Laboratory-based Serious Game for use in engineering and school education. The platform for this system is the WebLab-Deusto Framework, already well-tested within the remote laboratory context, and based on open standards. The laboratory allows users to control a mobile robot in a labyrinth environment and take part in an interactive game where they must locate and correctly answer several questions, the subject of which can be adapted to educators' needs. It also integrates the Google Blockly graphical programming language, allowing students to learn basic programming and logic principles without needing to understand complex syntax.