799 resultados para plasticidade anatômica
Resumo:
Este trabalho teve como objetivo analisar os ductos secretores e o óleo essencial das folhas de Foeniculum vulgare em diferentes épocas do ano. Para esta finalidade, foram realizados estudos de caracterização anatômica, bem como anatomia comparada dos ductos secretores e testes histoquímicos das folhas. O óleo essencial foi obtido de folhas e frutos, por hidrodestilação em aparelho de Clevenger e analisados quantitativamente e qualitativamente por cromatografia em fase gasosa acoplada ao espectrômetro de massa, realizando-se análises seguidas de três réplicas para folhas coletadas durante o inverno e primavera, e frutos no verão. Os resultados encontrados para os ductos secretores de óleo corresponderam à redução do teor de óleo essencial nas folhas coletadas no final da primavera. O componente majoritário do óleo essencial de folhas e frutos foi o trans-anetol, durante todas as estações do ano. Portanto, evidenciou-se que os ductos secretores e teor de óleo essencial estão relacionados, bem como os constituintes químicos também estão sujeitos a sazonalidade, conforme o estágio fenológico da planta.
Resumo:
The industries of structural ceramics are among the most important production chains in the state of Rio Grande do Norte. The industry and other interest groups to target the replacement of firewood by natural gas. Studies accordingly concluded that simple change does not guarantee products of superior quality, and that the increase in spending on fuel can economically cripple the use of gas for burning the majority of products manufactured by that action. However some proposals of innovations in terms of process and product are being studied in an attempt to justify the use of natural gas in industry, structural ceramics. One of the aspects investigated is the development of ceramic products differentiated, with new designs and greater value added. Inserted in that context, this paper aims to investigate the potential use of clay-firing clear fabrication of the "bricks of apparent joins drought", a new ceramic product with an innovative way. The development of the work was done in three stages. In the initial stage was held the characterization of raw materials, sought information on physical, chemical, mineralogical and mechanical samples. In the second stage five bodies were made using two of the nine ceramic clay characterized the first step. The masses were analyzed and compared with respect to the size distribution, plasticity and technological properties. In the last part of this work was carried out tests on massive bricks manufactured on an industrial scale. The results show that the nine clays can be used in the manufacture of new ceramic products, is the only constituent of mass ceramic or by mixing with other(s) clay(s
Resumo:
This work has for objective study compared the characteristics and technological properties of ceramic bodies from the region of Seridó-RN. The region under study has identified 23 cities where they were 80 ceramics industries. To define the universe of search, there was a survey of pottery that are part of APL Seridó next to the IEL. The characteristics and operating conditions of ceramics industries of the region were identified through a socio-economic questionnaire applied locally, which addressed issues such as: profiles of companies, production process etc. The analysis of information collected from 24 companies identified in seven cities shows that the vast majority of industries is small, with family structure, obsolete equipment and labo, little qualified. Most of the pottery works with low technical knowledge, poor control of the production process and product technology. The raw collected were submitted to analysis of X ray diffraction, chemical composition, termical analysis, particle size distribution and plasticity. Then were produced five formulations and made by uniaxial pressure at 25 MPa for firing in temperatures varying from 850 to 1050 °C. The firing technological properties evaluated were: mass loss to fire, lineal shrinkage, apparent density, apparent porosity, water absorption and flexural strength (3 points). The results indicated that the raw materials from the region have significant similarities in the composition chemical and mineralogical. Furthermore, it indicates the possibility of the use of cycles of firing faster and efficient than the current, limited to some clay mass burning of certain conditions
Resumo:
Thermal recovery methods, especially steam injection, have been used to produce heavy oils. However, these methods imply that the metallic casing-cement sheath interface is submitted to thermal cycling. As a consequence, cracking may develop due to the thermal expansion mismatch of such materials, which allows the flow of oil and gas through the cement sheath, with environmental and economical consequences. It is therefore important to anticipate interfacial discontinuities that may arise upon Thermal recovery. The present study reports a simple alternative method to measure the shear strength of casing-sheath interfaces using pushthrough geometry, applied to polymer-containing hardened cement slurries. Polyurethane and recycled tire rubber were added to Portland-bases slurries to improve the fracture energy of intrinsically brittle cement. Samples consisting of metallic casing sections surrounded by hardened polymer-cement composites were prepared and mechanically tested. The effect of thermal cycles was investigated to simulate temperature conditions encountered in steam injection recovery. The results showed that the addition of polyurethane significantly improved the shear strength of the casing-sheath interface. The strength values obtained adding 10% BWOC of polyurethane to a Portland-base slurry more than doubled with respect to that of polyurethane-free slurries. Therefore, the use of polyurethane significantly contributes to reduce the damage caused by thermal cycling to cement sheath, improving the safety conditions of oil wells and the recovery of heavy oils
Resumo:
The limits to inform is about the character stico of basic, quimica, mineralogical and mechaniques of matlaughed material used in the manufacturing process the product certified in economic region the Cariri, specifically in the city of Crato, Ceará state, motivated the development of this work, since in this region the exist ing economic context that a general appear as important in the production chains. Were made twentyfive soils-test specimen collection and the study was performed to differentiate the mat laugh materials of variaveis processing of mathing raw materials in the factory The product mica monkeys by extrusion and pressing. The results were obtained ap s as analyzes: grain size, index of plasticity, fluoresce incidence X-ray difration the X-ray, and analyzes thermicals and properties technological. through s of curves gresifica returned to was a comparison between the retro the linear, absorb to water, porosity and bulk density. the results show that the excellent distribution and character acceptable available for the processing of the structure color dark red. needing, therefore, of the mixture of a less plastic clay with thick granulation, that works as plasticity reducer. In spite of the different resignation forms for prensagem and extrusion, the characteristics of absorption of water and rupture tension the flexing was shown inside of the patterns of ABNT
Resumo:
Particularly in Braziland in Rio Grande do Norte, companies manufacturing red ceramic, play an important role as agents of development to study the region Seridó- RN, specific place for carrying out the research. It is observed in this region a concentration of red ceramic industries of small size, which, despite its importance in the ceramic, they are unable to enjoy or use the new forms of administrative management and technological advances designed and offered by universities, centers of research and projects of governments, remained almost entirely outside the progress and modernization, technological and administrative. These companies still have outdated technology, and management processes, providing quality problems and standardization of end products. Upon these conditions are the companies going through crisis and struggling to survive alone and without assistance. The region of Seridó-RN, lets make a detailed case study of red ceramic companies in the region proposed from the existing theoretical and actual lifting of the condition of the product manufacturing red ceramic, allowing through this overview of the implementation of collect samples of raw materials, allowing the study of each ceramic industry that contributed to the participation of the research, which was determined parameters such as: analysis of the physical, chemical and technological properties of raw materials, characterization of the processes used, raising the technological resources considering equipment, machinery, supplies, raw materials and facilities available and its organization by type of products from companies involved in this study. The methodology consists of the following steps: collection of raw material, crushing and screening, characterization of raw materials (liquid limit, chemical analysis, mineralogical analysis, differential thermal analysis, sieve analysis), mixing, forming, cutting, drying and burning of ceramic bodies and bodies of evidence. The results showed that it was clay with distinct characteristics with respect to plasticity. With respect to the different compositions of mixtures of ceramic masses, we conclude that the ceramic properties showed a direct proportionality with increasing fraction of the clay not plastic. However, the compositions of the masses studied proved to be the most appropriate for the types of simulated clay for use in ceramics. Adopted in the ceramic processing made it possible to obtain products the resulted in consistent properties, and in some cases even exceeding the requirements of technical studies and standard-Brazilian clays to obtain ceramic products such as tiles, bricks and tiles to floor. Based on the discussions from the results obtained in the various processing steps of this work, one can draw conclusions according to the physico-chemical and mineralogical properties of raw materials, the properties of ceramic products burned and analysis. This work may be used by other researchers, private companies and governmental organizations, undergraduate students and graduate, can develop studies and future research to: develop projects to modify the furnaces; mapping projects develop and rationalize the exploitation of raw materials ;promoting reforestation and forest management; develop reduction projects and recovery of waste; develop training projects in manpower sector, and develop security projects, improving the conditions of work in the area pottery
Resumo:
In recent decades, ceramic products have become indispensable to the technological development of humanity, occupying important positions in scientific production and consequently in industrial production. One area of the economy that continues to absorb large amounts of the products of this sector is Construction. Among the branches of the ceramic industry, there are the red ceramic industry which is traditionally the basis of that economic sector. Among the reasons for which the red ceramic industry became popular in the country, and specifically in Rio Grande do Norte, is the abundance of this raw material, easily found throughout the national territory. However, it appears that the red ceramic industry has deficiencies in technology and skilled labor, resulting in the production of ceramic goods with low added value. Among the factors that determine the quality of the ceramic products red has the proper formulation of the ceramic mass, the conformation and the firing temperature. Thus, the overall goal of this work is to study the mineralogical and technological properties, two clays from the region of the Wasteland Potiguar industrial ceramist. Therefore, the raw materials were characterized by analysis of Xray diffraction (XRD) analysis, X-ray fluorescence (XRF), particle size analysis (FA), scanning electron microscopy (SEM), optical microscopy (OM ), plasticity index (PI), thermal gravimetric analysis (TGA) and differential thermal analysis (DTA). The technological properties of the material were analyzed by water absorption tests (AA%) porosity (% PA), the linear shrinkage (RT%), apparent density (MEA), loss on ignition (PF%) and flexural strength three points (TRF)
Resumo:
Entre as práticas culturais a serem consideradas na implantação da cultura do arroz destaca-se a densidade de semeadura, que deve estabelecer, em grande parte, a participação do colmo principal e dos afilhos nos componentes da produção, possibilitando a obtenção da máxima produtividade. O trabalho teve como objetivo avaliar a participação do colmo principal e dos afilhos na produtividade de grãos de arroz, cv. IAC 102, no sistema irrigado por inundação, em função da densidade de semeadura. O experimento foi desenvolvido sob túnel plástico, em Botucatu (SP), em caixas d'água de cimento amianto de 500 L, contendo Neossolo Flúvico Ta Eutrófico, com profundidade de 30 cm. O delineamento experimental foi o inteiramente casualizado, com quatro repetições. As densidades de semeadura foram: 100, 200, 300, 400, 500 e 600 sementes viáveis por m², em 4 linhas de 1 m por caixa, espaçadas com 20 cm. A elevação da densidade de semeadura diminui o afilhamento e proporciona a maior participação dos colmos principais, porém, não resultando em incremento de produtividade, devido à plasticidade das plantas de arroz, que proporciona o ajustamento dos componentes da produção.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Os processos de quantificação e associação das lesões do esporte aos seus possíveis fatores causais são importantes para melhor entendimento sobre assunto. Assim constituiu-se como objetivo do presente estudo a observação das lesões desportivas (LD) em atletas da elite brasileira do atletismo, associando-as aos seus mecanismos de instalação e características da modalidade. Foram entrevistados 86 atletas (47 homens e 39 mulheres) convocados para representar o Brasil durante o ano de 2003. Utilizou-se um inquérito de morbidade referida, validado anteriormente, para obtenção dos dados referentes aos atletas e suas lesões. Para a análise dos resultados adotou-se o teste de Goodman para contrastes entre e dentro de proporções binomiais, sendo todas as conclusões discutidas para 5% de significância estatística. Os resultados mostraram que há maior taxa de lesão por atleta (l/a), nas provas combinadas (3,5 l/a), seguidas por eventos de velocidade (2,6 l/a), resistência (1,9 l/a) e saltos (1,9 l/a) respectivamente. O principal mecanismo causal é a alta intensidade acometendo preferencialmente velocistas e fundistas. Outra forte associação foi observada entre lesões musculares e provas de velocidade, que também apresentam preferência para ocorrência de lesão na região da coxa. As atividades com elevada intensidade foram o principal responsável por lesões musculares, enquanto as osteoarticulares e tendinopatias ocorrem com excesso de repetições. Concluiu-se, a partir dos achados, que existem associações entre lesões e fatores causais, como entre provas e lesões, mecanismos de lesão e local anatômico.
Resumo:
This work has as object of study the Hospital de Caridade Juvino Barreto, nosocomial institution located in the city of Natal (RN), between the Praia de Areia Preta and the Monte Petrópolis, focusing on the period from 1909, the year in which the new hospital building was constructed and opened, and 1927, the date of the transfer of administration of the public domain to the newly created Sociedade de Assistência Hospitalar (SAH). We study the conditions of possibility of the emergence of this hospital space in the urban environment of the capital of Rio Grande do Norte, seeking to understand the different tactics and strategies implemented by the historical subjects involved in the formation of this institution nosocomial. Starting from a corpus of documents consisting of medical memories (with Dr. Januário Cicco as privileged observer), information present in newspapers (the Republic and the Christmas Journa l), photo collection and extensive administrative and legal material (Speeches, Exhibitions, Reports, Laws and Resolutions), we analyzed in detail the medical geography of HCJB, relating the discourses of medicine and geography in choosing the spatial location of the hospital as we examine the architecture of the hospital, its inner spat iality, divisions, forms of space control, and, finally, we discuss the medical practices that took place within it, leading us in this regard, from the experiences of clinical hospital chief, Dr. Januário Cicco, especially the discussion on "ethics" in hospital work. The perception of HCJB as medical nosoespaciality always on the move, incorporated under taxonomic principles based on difference and dispersion forces, led us to articulate it theoretically from the conceptual-methodological arsenal of philosopher Michel Foucault, particularly his reflections of genealogical phase, focusing on the phenomenon of power, a position that allows us to enhance our space-hospital construction, invention, product of power relations, which give the unfinished aspect nosocômio, apparent, always at stake, perpetual non-modeling possibility has previously defined array, establishing it at the field of possible, of virtuality, of power: hospital that could have been and that it was not. Indeed, the investigation of various aspects/elements of hospital space Juvino Barreto revealed us new dimensions of hospital space, far more complex than the simple and the current idea of a place to shelter patients: plasticity and fluidity of space, which is not made to circumscribe the limits of empeiria, engraving up to strength relations fought between different subject; its Constitution as a transitional space, Heterotopic, doing live inside modern elements with premoderns (professional doctors working with religious thought, skeptical of positivist medicine living with the religious faith of the nuns of Santana); the impossibility of thinking hospital space of HCJB while homogeneous unit, static, transistoric, making the spatiality, without considering the profound differences, fractures and dislocations that animated his own existence, multiplying their expressions of identity
Resumo:
The purpose of this study was to assess the immunohistochemical expression of CD105 and FvW antibodies in the angiogenesis of oral epidermoid carcinoma (OEC), correlating it with the TNM clinical staging system, seeking a better understanding of its biological behavior and use as an indicator of prognosis.The sample consisted of 30 epidermoid carcinoma (EC) cases, 10 of the floor of the mouth, 10 of the retromolar region and 10 of the tongue, in addition to 10 cases of pyogenic granuloma, which made up the control group. The results showed that mean microvessel counts (MVC) were correspondingly higher in the pyogenic granuloma group (CD105 = 57.26 vessels and FvW = 39.64) than in the EC group (CD105 = 10.09 and FvW = 12.20) and that the differences were statistically significant between the groups for each of the angiogenic biomarkers (p = 0.002 for CD105 and p< 0.001 for FvW). CD105 had better positivity in the pyogenic granuloma group (mean = 57.26 vessels) and for EC, FvW had the highest expression (mean = 12.20 vessels). With respect to EC, the most affected age group was between 51 and 70 years (n = 14; 46.7%), with a representative MVC for both markers. No statistically significant difference was found between the sexes for any of the markers (p = 0.967 for CD105 and p = 0.744 for FvW). Mean CD105 levels were much higher in patients with stage T3 and T4 (17.13) and lower in those with stage N+ (6.36). Mean FvW levels were higher in the patients with stage T1 and T2 (12.23) and lower in patients with T3 and T4 (12.10), but without a statistically significant difference. In regard to anatomic location, a statistically significant difference was observed between FvW sites, with a statistically significant difference between floor of the mouth cases and those located in the retromolar region (p =0.013). Therefore, this study suggests that CD105 expression in OEC angiogenesis, in contrast to other types of malignant neoplasias, may not be correlated with prognosis and tumor aggressiveness, whereas FvW was a more effective antibody for staining this lesion
Resumo:
Th17 cells have been strongly associated to the pathogenesis of inflammatory and autoimmune diseases, although their influence on the carcinogenesis is still little known, there are reports of anti-tumor and protumoral actions. The objective of this study is to research the presence of Th17 lineage in lip and tongue SCC, using the analysis of the immunoexpression of IL-17 and RORγt, relating this immunoexpression with clinical and morphological findings in the attempt to better comprehend the role of these cells on the tumoral immunity of OSCCs. The results were submitted to non-parametric statistical tests with significance level of 5%. On the histomorphological analysis, it was observed the predominance of low level lesions on lip and high level lesions on tongue (p=0,024). It was not observed statistical significance between clinical stage and histological gradation of malignancy (p=0,644). For the immunohistochemical study, 5 random fields with greater immunoreactivity of the peritumoral inflammatory infiltrate were photomicrographed on the 400x magnification. It was done the count of lymphocytes which showed cytoplasmic and pericytoplasmic staining for the IL-17 cytokine as well as nuclear and cytoplasmic staining for RORγt. It was observed statistical significance difference on the quantity of immunopositive lymphocytes to IL-17 between the groups of SCC of lip and tongue (p=0,028). For the RORγt it was not observed statistical significance difference between the groups of SCC of lip and tongue (p=0,915). It was not observed statistical difference between the immunostaining of IL-17 and RORγt with histological gradation of malignancy and clinical staging. The findings of this research suggest a possible anti-tumor role of IL-17 for cases of lip. The results of the analysis of the RORγt are possibly due to the wide duality of the anti-tumor and protumoral role of the Th17 cells and their plasticity which, in the presence of different cytokines expressed on the tumor microenvironment, can alter its phenotype.
Resumo:
Oral squamous cell carcinoma (OSCC) is the most common malignancy in oral cavity and human papillomavirus (HPV) may have an important role in its development. The aim of this experiment was to investigate the HPV DNA and viral types in 90 cases of OSCC. Moreover, a comparative analysis between the cases of OSSC with and without HPV DNA was performed by using cell cycle markers p21 and pRb in order to detect a possible correlation of these proteins and HPV infection. DNA was extracted from paraffin embedded tissue and amplified by PCR (polymerase chain reaction) with primers PCO3+ e PCO4+ for a fragment of human β-globin gene. After this procedure, PCR for HPV DNA detection was realized using a pair of generic primers GP5+ e GP6+. Immunohistochemical study was performed by streptoavidin-biotin technique and antibodies against p21 and pRb proteins were employed. Eighty-eight cases were positive for human β-globin gene and HPV DNA was found in 26 (29.5%) of then. It could not be detected significant correlation between HPV and age, sex and anatomical sites of the lesion. The most prevalent viral type was HPV 18 (80.8%). Regarding the immunohistochemical analysis, it was detected significant association between HPV presence and pRb immunoexpression (p=0,044), nevertheless, the same was not observed in relation to p21 protein (p =0,416). It can be concluded that the low detection of HPV DNA in OSCC by the present experiment suggests a possible role of the virus in the development and progression in just a subset of this disease