955 resultados para parent value added
Resumo:
By means of this paper is to critically analyze the current situation of beekeeping in the town of Tandil (Buenos Aires), from the objectives set out in the Strategic Plan Argentina Beekeeping 2017, approved in 2008, whose goal is aimed at that country from becoming a global market leader of value-added bee products, ensuring sustainable development in economic, environmental and social. At first briefly reviews the national bee scene, in which Argentina is known for being the third largest producer of honey, after China and the U.S., while competing with China for the first world exporter, a situation that contrasts with low domestic consumption. Then describes the strategic objectives that promotes the Plan, including: marketing, production, promotion and added value. Then we analyze the main characteristics of the honey industry in the area chosen, the town of Tandil, where the stage is characterized by a large number of small producers who are mostly engaged in the informal sale of honey for direct consumption but whose demand is low, compared to a small number of collectors, packers and exporters that dominate the international market. In general it is observed that, with few exceptions, the honey is exported in bulk, as a commodity, and its main use molasses to improve lower quality of recipient countries. Meanwhile the honey for local consumption, is usually of inferior quality because they generally are not subject to quality controls required by the circuit of export. To overcome the limitations of beekeeping above, highlights the collaborative efforts of government agencies such as the National Institute of Agricultural Technology (INTA) and the Faculty of Veterinary Science, National University Centre of the Province of Buenos Aires. As a preliminary conclusion, it is argued that the Strategic Plan Argentina Beekeeping is still valid as a tool for development of the sector, and is also essential to encourage the development of competitive products in terms of quality and differentiation, through the development of technology and knowledge sharing to ensure growth and sustainability of beekeeping in the town of Tandil
Resumo:
En este trabajo se analizan una serie de aspectos que resultan centrales para comprender la situación de los trabajadores en el sector agropecuario. En primer lugar, se contrapone la evolución del producto del sector con su capacidad para generar puestos de trabajo. Luego, se da cuenta de las condiciones de empleo poniendo especial énfasis en el estudio del grado de informalidad y de los niveles salariales. Se compara, a continuación, la distribución primaria del ingreso del sector con la de la economía nacional en su conjunto. Este análisis distributivo se complementa con dos estudios de caso que intentan poner de manifiesto las implicancias de los distintos cultivos llevados a cabo en diferentes regiones. El estudio muestra que el salario medio del sector agropecuario sigue estando muy por debajo de la remuneración promedio de la economía y que, además, la participación de los salarios en el valor agregado del sector se ha reducido desde la salida de la Convertibilidad, incluso en un contexto de aumento del salario medio sectorial. Finalmente, sobre la base del análisis de los casos mencionados, se asocia la distribución del ingreso con los distintos cultivos y las regiones donde estos se desarrollan. Al respecto, se discute el rol de las ganancias individuales como guía orientadora del uso de la tierra cultivable
Resumo:
By means of this paper is to critically analyze the current situation of beekeeping in the town of Tandil (Buenos Aires), from the objectives set out in the Strategic Plan Argentina Beekeeping 2017, approved in 2008, whose goal is aimed at that country from becoming a global market leader of value-added bee products, ensuring sustainable development in economic, environmental and social. At first briefly reviews the national bee scene, in which Argentina is known for being the third largest producer of honey, after China and the U.S., while competing with China for the first world exporter, a situation that contrasts with low domestic consumption. Then describes the strategic objectives that promotes the Plan, including: marketing, production, promotion and added value. Then we analyze the main characteristics of the honey industry in the area chosen, the town of Tandil, where the stage is characterized by a large number of small producers who are mostly engaged in the informal sale of honey for direct consumption but whose demand is low, compared to a small number of collectors, packers and exporters that dominate the international market. In general it is observed that, with few exceptions, the honey is exported in bulk, as a commodity, and its main use molasses to improve lower quality of recipient countries. Meanwhile the honey for local consumption, is usually of inferior quality because they generally are not subject to quality controls required by the circuit of export. To overcome the limitations of beekeeping above, highlights the collaborative efforts of government agencies such as the National Institute of Agricultural Technology (INTA) and the Faculty of Veterinary Science, National University Centre of the Province of Buenos Aires. As a preliminary conclusion, it is argued that the Strategic Plan Argentina Beekeeping is still valid as a tool for development of the sector, and is also essential to encourage the development of competitive products in terms of quality and differentiation, through the development of technology and knowledge sharing to ensure growth and sustainability of beekeeping in the town of Tandil
Resumo:
En el artículo nos planteamos los cambios que desde los años 1990 ha sufrido la producción de algodón en la Provincia del Chaco -principal referente nacional del cultivo- y cómo estos fueron modificando la estructura de vida de los agentes históricamente vinculados, en especial, los trabajadores y los minifundistas hoy prácticamente excluidos de dicho proceso. Entre los numerosos cambios, los más relevantes son los vinculados al proceso de tecnificación, a la desarticulación en el territorio de cadenas de valor agregado y a la diversificación hacia otros cultivos como las oleaginosas y, notoriamente, al avance del cultivo de soja sobre hectáreas antes destinadas al algodón. Como consecuencia de dichos procesos de cambio, se evidencia la imposibilidad -por parte de los minifundistas- de sostener una producción rentable, la pérdida de numerosas fuentes de trabajo directas e indirectas, el aumento de la pobreza, la emigración hacia los cordones periféricos urbanos (Gran Resistencia, Gran Rosario) y el deterioro de las condiciones laborales de quienes aún permanecen dentro del sistema productivo algodonero. Las políticas públicas, tanto locales como nacionales, también son un punto de interés en el análisis puesto que tienen gran repercusión en el actual estado de la situación
Resumo:
In this paper the total factor productivity (TFP) of the manufacturing sectors in Taiwan and the Republic of Korean was measured and compared using the growth accounting method. Through descriptive analysis, inefficiency in the Korean manufacturing sectors was revealed, especially for the period prior to 1986. Also for the period posterior to 1986, it was found that TFP tended to contribute more to the value-added growth in both countries. An econometric analysis with industrialization-related variables revealed a contrast in the structure of TFP growth between the two countries. Import penetration, capital intensity, and growth of real output were estimated to exert a positive productivity impact in Taiwan, reflecting Taiwan's flexibility and superiority in factor utilization compared with Korea. It was estimated that the export ratio did not have any major productivity impact in both countries, in contrast with the results reported by the World Bank (The East Asian Miracle: Economic Growth and Public Policy, New York: Oxford University Press, 1993).
Resumo:
Introduction: During the period from the latter half of the 1980s until just before the Asian currency crisis in 1997, Indonesia’s economic development had drawn expectations and attention from various quarters, along with Malaysia and Thailand within the same Association of Southeast Asian Nations (ASEAN). In fact, the 1993 report by the World Bank, entitled “East Asian Miracle: Economic Growth and Public Policy,” recognized Indonesia as one of the East Asian economies with the strong economic performance, i.e. sustained economic growth (World Bank [1993]). And it was the manufacturing industry that had been the driving force behind Indonesia’s economic growth during that period. Since the 1997 outbreak of the Asian currency crisis, however, the manufacturing sector in Indonesia has been mired in a situation that rules out the kind of bright prospects it had emanated previously. The Indonesian economy is still in the developing stage, and in accordance with the history of industrial structural changes in other countries, Indonesia’s manufacturing industry can still be expected to serve as the engine of the country’s economic development. But is it really possible in an environment where economic liberalization and globalization are forging ahead? And, what sort of problems have to be dealt with to make it possible? To answer these questions, it is necessary to know the current conditions of Indonesia’s manufacturing sector, and to do that, it becomes important to think back on the history of the country’s industrialization. Thus, this paper is intended to retrace and unlock the track of Indonesia’s industrialization up until the establishment of the manufacturing sector in its present form, with the ultimate goal being to give answers to the above-mentioned questions. Subject to an analysis in this paper is the period from the installment of President Soeharto’s administration onward when industrialization of the modern industrial sector2 moved into high gear. The composition of this paper is outlined below. Section 1 first shows why it is important to examine import substitution and export orientation, both of which are used as the measures of the analysis in this paper, in tracking the history of the industrialization, and then discuss indicators of import substitution and export orientation as well as statistical data and resources needed to develop those indicators. Section 2 clarifies the status of the manufacturing industry among all industries by looking at the composition ratio of the manufacturing industry in terms of value added, imports and exports. Section 3 to 5 cover three periods between 1971 and 1995 and make an analysis of import substitution, export orientation and changes in the industrial structure for each period. Section 3 analyzes the period from 1971 through 1985, when Indonesia pursued the import substitution policy amid the oil boom. Section 4 covers the period from 1985 through 1990, when the packages of deregulatory measures were announced successively under structural adjustment policies made necessary by the fall in oil prices. Section 5 examines the period from 1990 through 1995, which saw the alternate shifts between the overheating of the economy by sharply rising investment by both domestic and foreign investors in the wake of the liberalization of investment, trade and financial services, and polices to cool down the economy. Section 6, which covers the 1995-1999 period straddling the economic crisis, is designed for an analysis of the changes in production trends before and after the economic crisis as well as the changes in the industrial structure. Section 7, after summing up the history of Indonesia’s industrialization examined in the previous sections, discusses problems found in respective sectors and attempts to present future prospects for the country’s manufacturing industry.
Resumo:
The Asia-Pacific Region has enjoyed remarkable economic growth in the last three decades. This rapid economic growth can be partially attributed to the global spread of production networks, which has brought about major changes in spatial interdependence among economies within the region. By applying an Input-Output based spatial decomposition technique to the Asian International Input-Output Tables for 1985 and 2000, this paper not only analyzes the intrinsic mechanism of spatial economic interdependence, but also shows how value added, employment and CO2 emissions induced are distributed within the international production networks.
Resumo:
International input-output tables are among the most useful tools for economic analysis. Since these tables provide detailed information about international production networks, they have recently attracted considerable attention in research on spatial economics, global value chains, and issues relating to trade in value-added. The Institute of Developing Economies at the Japan External Trade Organization (IDE-JETRO) has more than 40 years of experience in the construction and analysis of international input-output tables. This paper explains the development of IDE-JETRO’s multi-regional input-output projects including the construction of the Asian International Input-Output table and the Transnational Interregional Input-Output table between China and Japan. To help users understand the features of the tables, this paper also gives examples of their application.
Resumo:
The development of agriculture is a main pillar of Myanmar’s growth strategies. It is natural for the Myanmar government to prioritize agriculture as a source of economic growth, since it accounted for 36% of GDP, employs a majority of labor force, and generates nearly 30% of exports as of 2010. Although the agricultural share in GDP and employment usually declines as an economy grows, it is not a sunset industry in Myanmar. Methods exist for increasing agriculture’s value added other than the growth of labor and land inputs. The key is to enhance three productivity measures: labor, land, and total productivity. We call this strategy "Agriculture Plus Plus."
Resumo:
This paper examines empirically the impacts of sharing rules of origin (RoOs) with other ASEAN+1 free trade agreements (FTAs) on ASEAN-Korea FTA/ASEAN-China FTA utilization in Thai exports in 2011. Our careful empirical analysis suggests that the harmonization of RoOs across FTAs play some role in reducing the costs yielded through the spaghetti bowl phenomenon. In particular, the harmonization to "change-in-tariff classification (CTC) or real value-added content (RVC)" will play a relatively positive role in not seriously discouraging firms’ use of multiple FTA schemes. On the other hand, the harmonization to CTC or CTC&RVC hinders firms from using those schemes.
Resumo:
This paper examines the overall and sectoral economic impact of foreign direct investment (FDI) on the Thai economy using the economic data from 2005-2013. In assessing the overall economic impact, it is found that FDI has contributed positively to Thailand's economic growth. However, when analyzing the sectoral details, the empirical results indicate that FDI has a varying impact on the productive sectors in Thailand. Out of the 9 sub-sectors covered by this study, 5 sub-sectors (manufacturing, construction, financial, wholesale, retail trade, and agriculture) show strong statistically-significant positive effects of FDI on the relevant sector's value-added output. Based on these findings, it is suggested that policy-makers, including the Board of Investment, should aim to promote FDI with special consideration of the sectoral impact that would enable Thailand's FDI promotion policies to be more productive and beneficial for the Thai economy.
Resumo:
In order to illustrate how the input-output approach can be used to explore various aspects of a country's participation in GVCs, this paper applies indicators derived from the concept of trade in value-added (TiVA) to the case of Costa Rica. We intend to provide developing countries that seek to foster GVC-driven structural transformation with an example that demonstrates an effective way to measure progress. The analysis presented in this paper makes use of an International Input-Output Table (IIOT) that was constructed by including Costa Rica's first Input-Output Table (IOT) into an existing IIOT. The TiVA indicator has been used to compare and contrast import flows, export flows and bilateral trade balances in terms of gross trade and trade in value-added. The country's comparative advantage is discussed based on a TiVA-related indicator of revealed comparative advantage. The paper also decomposes the domestic content of value added in each sector and measures the degree of fragmentation in the value chains in which Costa Rica participates, highlighting the partner countries that add the most value.
Resumo:
Deregulation of the use of temporary workers in 2004 (the Worker Dispatching Act of 2004) has been regarded as an important reason for the recent rise of temporary workers in Japan. However, the shift from permanent to temporary workers began long before. This paper empirically explores links between the shift from permanent to temporary workers in the Japanese manufacturing sector and economic globalization, using industry-level data. We find that outsourcing is positively correlated with the replacement of permanent workers with temporary workers in domestic production. In addition, we find that industries losing world share of value added tend to decrease the employment of permanent workers. Industries with higher exports or imports are aggressive in using temporary workers, which suggests the role of temporary workers as an employment buffer.
A Methodological model to assist the optimization and risk management of mining investment decisions
Resumo:
Identifying, quantifying, and minimizing technical risks associated with investment decisions is a key challenge for mineral industry decision makers and investors. However, risk analysis in most bankable mine feasibility studies are based on the stochastic modelling of project “Net Present Value” (NPV)which, in most cases, fails to provide decision makers with a truly comprehensive analysis of risks associated with technical and management uncertainty and, as a result, are of little use for risk management and project optimization. This paper presents a value-chain risk management approach where project risk is evaluated for each step of the project lifecycle, from exploration to mine closure, and risk management is performed as a part of a stepwise value-added optimization process.
Resumo:
Success in the mobile search market will come to those who provide value-added apps that exploit unique mobile functionalities, especially those related to personalized and context-based services.