Wave energy conversion of oscillating water column devices including air compressibility

This paper presents an investigation on air compressibility in the air chamber and its effects on the power conversion of oscillating water column (OWC) devices. As it is well known that for practical OWC plants, their air chambers may be large enough for accommodating significant air compressibility, the “spring effect,” an effect that is frequently and simply regarded to store and release energy during the reciprocating process of a wave cycle. Its insight effects on the device’s performance and power conversion, however, have not been studied in detail. This research will investigate the phenomena with a special focus on the effects of air compressibility on wave energy conversion. Air compressibility itself is a complicated nonlinear process in nature, but it can be linearised for numerical simulations under certain assumptions for frequency domain analysis. In this research work, air compressibility in the OWC devices is first linearised and further coupled with the hydrodynamics of the OWC. It is able to show mathematically that in frequency-domain, air compressibility can increase the spring coefficients of both the water body motion and the device motion (if it is a floating device), and enhance the coupling effects between the water body and the structure. Corresponding to these changes, the OWC performance, the capture power, and the optimised Power Take-off (PTO) damping coefficient in the wave energy conversion can be all modified due to air compressibility. To validate the frequency-domain results and understand the problems better, the more accurate time-domain simulations with fewer assumptions have been used for comparison. It is shown that air compressibility may significantly change the dynamic responses and the capacity of converting wave energy of the OWC devices if the air chamber is very large.

3D Navigation with Six Degrees-of-Freedom using a Multi-Touch Display

With the introduction of new input devices, such as multi-touch surface displays, the Nintendo WiiMote, the Microsoft Kinect, and the Leap Motion sensor, among others, the field of Human-Computer Interaction (HCI) finds itself at an important crossroads that requires solving new challenges. Given the amount of three-dimensional (3D) data available today, 3D navigation plays an important role in 3D User Interfaces (3DUI). This dissertation deals with multi-touch, 3D navigation, and how users can explore 3D virtual worlds using a multi-touch, non-stereo, desktop display. The contributions of this dissertation include a feature-extraction algorithm for multi-touch displays (FETOUCH), a multi-touch and gyroscope interaction technique (GyroTouch), a theoretical model for multi-touch interaction using high-level Petri Nets (PeNTa), an algorithm to resolve ambiguities in the multi-touch gesture classification process (Yield), a proposed technique for navigational experiments (FaNS), a proposed gesture (Hold-and-Roll), and an experiment prototype for 3D navigation (3DNav). The verification experiment for 3DNav was conducted with 30 human-subjects of both genders. The experiment used the 3DNav prototype to present a pseudo-universe, where each user was required to find five objects using the multi-touch display and five objects using a game controller (GamePad). For the multi-touch display, 3DNav used a commercial library called GestureWorks in conjunction with Yield to resolve the ambiguity posed by the multiplicity of gestures reported by the initial classification. The experiment compared both devices. The task completion time with multi-touch was slightly shorter, but the difference was not statistically significant. The design of experiment also included an equation that determined the level of video game console expertise of the subjects, which was used to break down users into two groups: casual users and experienced users. The study found that experienced gamers performed significantly faster with the GamePad than casual users. When looking at the groups separately, casual gamers performed significantly better using the multi-touch display, compared to the GamePad. Additional results are found in this dissertation.

(Table 1) Water column silicic acid concentrations and Si isotopic composition during Marion Dufresne cruise MD166 off South Africa

Silicon isotopic signatures (d30Si) of water column silicic acid (Si(OH)4) were measured in the Southern Ocean, along a meridional transect from South Africa (Subtropical Zone) down to 57° S (northern Weddell Gyre). This provides the first reported data of a summer transect across the whole Antarctic Circumpolar Current (ACC). d30Si variations are large in the upper 1000 m, reflecting the effect of the silica pump superimposed upon meridional water transfer across the ACC: the transport of Antarctic surface waters northward by a net Ekman drift and their convergence and mixing with warmer upper-ocean Si-depleted waters to the north. Using Si isotopic signatures, we determine different mixing interfaces: the Antarctic Surface Water (AASW), the Antarctic Intermediate Water (AAIW), and thermoclines in the low latitude areas. The residual silicic acid concentrations of end-members control the d30Si alteration of the mixing products and with the exception of AASW, all mixing interfaces have a highly Si-depleted mixed layer end-member. These processes deplete the silicic acid AASW concentration northward, across the different interfaces, without significantly changing the AASW d30Si composition. By comparing our new results with a previous study in the Australian sector we show that during the circumpolar transport of the ACC eastward, the d30Si composition of the silicic acid pools is getting slightly, but significantly lighter from the Atlantic to the Australian sectors. This results either from the dissolution of biogenic silica in the deeper layers and/or from an isopycnal mixing with the deep water masses in the different oceanic basins: North Atlantic Deep Water in the Atlantic, and Indian Ocean deep water in the Indo-Australian sector. This isotopic trend is further transmitted to the subsurface waters, representing mixing interfaces between the surface and deeper layers. Through the use of d30Si constraints, net biogenic silica production (representative of annual export), at the Greenwich Meridian is estimated to be 5.2 ± 1.3 and 1.1 ± 0.3 mol Si/m**2 for the Antarctic Zone and Polar Front Zone, respectively. This is in good agreement with previous estimations. Furthermore, summertime Si-supply into the mixed layer of both zones, via vertical mixing, is estimated to be 1.6 ± 0.4 and 0.1 ± 0.5 mol Si/m**2, respectively.

On the multi-dimensionality and sampling of air transport networks

Complex network theory is a framework increasingly used in the study of air transport networks, thanks to its ability to describe the structures created by networks of flights, and their influence in dynamical processes such as delay propagation. While many works consider only a fraction of the network, created by major airports or airlines, for example, it is not clear if and how such sampling process bias the observed structures and processes. In this contribution, we tackle this problem by studying how some observed topological metrics depend on the way the network is reconstructed, i.e. on the rules used to sample nodes and connections. Both structural and simple dynamical properties are considered, for eight major air networks and different source datasets. Results indicate that using a subset of airports strongly distorts our perception of the network, even when just small ones are discarded; at the same time, considering a subset of airlines yields a better and more stable representation. This allows us to provide some general guidelines on the way airports and connections should be sampled.

Interannual and (multi-)decadal variability in the sedimentary BIT index of Lake Challa, East Africa, over the past 2200 years: assessment of the precipitation proxy

The branched vs. isoprenoid tetraether (BIT) index is based on the relative abundance of branched tetraether lipids (brGDGTs) and the isoprenoidal GDGT crenarchaeol. In Lake Challa sediments the BIT index has been applied as a proxy for local monsoon precipitation on the assumption that the primary source of brGDGTs is soil washed in from the lake's catchment. Since then, microbial production within the water column has been identified as the primary source of brGDGTs in Lake Challa sediments, meaning that either an alternative mechanism links BIT index variation with rainfall or that the proxy's application must be reconsidered. We investigated GDGT concentrations and BIT index variation in Lake Challa sediments at a decadal resolution over the past 2200 years, in combination with GDGT time-series data from 45 monthly sediment-trap samples and a chronosequence of profundal surface sediments.

Our 2200-year geochemical record reveals high-frequency variability in GDGT concentrations, and therefore in the BIT index, superimposed on distinct lower-frequency fluctuations at multi-decadal to century timescales. These changes in BIT index are correlated with changes in the concentration of crenarchaeol but not with those of the brGDGTs. A clue for understanding the indirect link between rainfall and crenarchaeol concentration (and thus thaumarchaeotal abundance) was provided by the observation that surface sediments collected in January 2010 show a distinct shift in GDGT composition relative to sediments collected in August 2007. This shift is associated with increased bulk flux of settling mineral particles with high Ti / Al ratios during March–April 2008, reflecting an event of unusually high detrital input to Lake Challa concurrent with intense precipitation at the onset of the principal rain season that year. Although brGDGT distributions in the settling material are initially unaffected, this soil-erosion event is succeeded by a massive dry-season diatom bloom in July–September 2008 and a concurrent increase in the flux of GDGT-0. Complete absence of crenarchaeol in settling particles during the austral summer following this bloom indicates that no Thaumarchaeota bloom developed at that time. We suggest that increased nutrient availability, derived from the eroded soil washed into the lake, caused the massive bloom of diatoms and that the higher concentrations of ammonium (formed from breakdown of this algal matter) resulted in a replacement of nitrifying Thaumarchaeota, which in typical years prosper during the austral summer, by nitrifying bacteria. The decomposing dead diatoms passing through the suboxic zone of the water column probably also formed a substrate for GDGT-0-producing archaea. Hence, through a cascade of events, intensive rainfall affects thaumarchaeotal abundance, resulting in high BIT index values.

Decade-scale BIT index fluctuations in Lake Challa sediments exactly match the timing of three known episodes of prolonged regional drought within the past 250 years. Additionally, the principal trends of inferred rainfall variability over the past two millennia are consistent with the hydroclimatic history of equatorial East Africa, as has been documented from other (but less well dated) regional lake records. We therefore propose that variation in GDGT production originating from the episodic recurrence of strong soil-erosion events, when integrated over (multi-)decadal and longer timescales, generates a stable positive relationship between the sedimentary BIT index and monsoon rainfall at Lake Challa. Application of this paleoprecipitation proxy at other sites requires ascertaining the local processes which affect the productivity of crenarchaeol by Thaumarchaeota and brGDGTs.

A Two-Stage Online Approach for Collaborative Multi-Agent Planning under Uncertainty

In a team of multiple agents, the pursuance of a common goal is a defining characteristic. Since agents may have different capabilities, and effects of actions may be uncertain, a common goal can generally only be achieved through a careful cooperation between the different agents. In this work, we propose a novel two-stage planner that combines online planning at both team level and individual level through a subgoal delegation scheme. The proposal brings the advantages of online planning approaches to the multi-agent setting. A number of modifications are made to a classical UCT approximate algorithm to (i) adapt it to the application domains considered, (ii) reduce the branching factor in the underlying search process, and (iii) effectively manage uncertain information of action effects by using information fusion mechanisms. The proposed online multi-agent planner reduces the cost of planning and decreases the temporal cost of reaching a goal, while significantly increasing the chance of success of achieving the common goal. 

Application of multivariable control using artificial neural networks in a debutanizer distillation column

LOPES, Jose Soares Batista et al. Application of multivariable control using artificial neural networks in a debutanizer distillation column.In: INTERNATIONAL CONGRESS OF MECHANICAL ENGINEERING - COBEM, 19, 5-9 nov. 2007, Brasilia. Anais... Brasilia, 2007

On Multi- Server Queues With Consultation With Main Server

Queueing Theory is the mathematical study of queues or waiting lines. Queues abound in every day life - in computer networks, in tra c islands, in communication of electro-magnetic signals, in telephone exchange, in bank counters, in super market checkouts, in doctor's clinics, in petrol pumps, in o ces where paper works to be processed and many other places. Originated with the published work of A. K. Erlang in 1909 [16] on congestion in telephone tra c, Queueing Theory has grown tremendously in a century. Its wide range applications includes Operations Research, Computer Science, Telecommunications, Tra c Engineering, Reliability Theory, etc.

Using AHP and the IPMA Competence Baseline in the project managers selection process

This paper proposes the joint use of the AHP (Analytic Hierarchy Process) and the ICB (IPMA Competence Baseline), as a tool for the decision-making process of selecting the most suitable managers for projects. A hierarchical structure, comprising the IPMA’s ICB 3.0 contextual, behavioural and technical competence elements, is constructed for the selection of project managers. It also describes the AHP implementation, illustrating the whole process with an example using all the 46 ICB competence elements as model criteria. This tool can be of high interest to decision-makers because it allows comparing the candidates for managing a project using a systematic and rigorous process with a rich set of proven criteria.

Team Member’s Centrality, Cohesion, Conflict, and Performance in Multi-University Geographically Distributed Project Teams

This study examined team processes and outcomes among 12 multi-university distributed project teams from 11 universities during its early and late development stages over a 14-month project period. A longitudinal model of team interaction is presented and tested at the individual level to consider the extent to which both formal and informal network connections—measured as degree centrality—relate to changes in team members’ individual perceptions of cohesion and conflict in their teams, and their individual performance as a team member over time. The study showed a negative network centrality-cohesion relationship with significant temporal patterns, indicating that as team members perceive less degree centrality in distributed project teams, they report more team cohesion during the last four months of the project. We also found that changes in team cohesion from the first three months (i.e., early development stage) to the last four months (i.e., late development stage) of the project relate positively to changes in team member performance. Although degree centrality did not relate significantly to changes in team conflict over time, a strong inverse relationship was found between changes in team conflict and cohesion, suggesting that team conflict emphasizes a different but related aspect of how individuals view their experience with the team process. Changes in team conflict, however, did not relate to changes in team member performance. Ultimately, we showed that individuals, who are less central in the network and report higher levels of team cohesion, performed better in distributed teams over time.

The Use of Multi-Criteria Decision Analysis in Performing Alternatives Assessment and Comparative Risk Analysis: The Case Study of Codling Moth Pesticides

Thesis (Ph.D.)--University of Washington, 2016-08

Evaluating a School Community Linked Physical Activity Intervention Programme: a Multi-level Analysis.

Previous research has highlighted the importance of positive physical activity (PA) behaviors during childhood to promote sustained active lifestyles throughout the lifespan (Telama et al. 2005; 2014). It is in this context that the role of schools and teachers in facilitating PA education is promoted. Research suggests that teachers play an important role in the attitudes of children towards PA (Figley 1985) and schools may be an efficient vehicle for PA provision and promotion (McGinnis, Kanner and DeGraw, 1991; Wechsler, Deveraux, Davis and Collins, 2000). Yet despite consensus that schools represent an ideal setting from which to ‘reach’ young people (Department of Health and Human Services, UK, 2012) there remains conceptual (e.g. multi-component intervention) and methodological (e.g. duration, intensity, family involvement) ambiguity regarding the mechanisms of change claimed by PA intervention programmes. This may, in part, contribute to research findings that suggest that PA interventions have had limited impact on children’s overall activity levels and thereby limited impact in reducing children’s metabolic health (Metcalf, Henley & Wilkin, 2012). A marked criticism of the health promotion field has been the focus on behavioural change while failing to acknowledge the impact of context in influencing health outcomes (Golden & Earp, 2011). For years, the trans-theoretical model of behaviour change has been ‘the dominant model for health behaviour change’ (Armitage, 2009); this model focusses primarily on the individual and the psychology of the change process. Arguably, this model is limited by the individual’s decision-making ability and degree of self-efficacy in order to achieve sustained behavioural change and does not take account of external factors that may hinder their ability to realise change. Similar to the trans-theoretical model, socio-ecological models identify the individual at the focal point of change but also emphasises the importance of connecting multiple impacting variables, in particular, the connections between the social environment, the physical environment and public policy in facilitating behavioural change (REF). In this research, a social-ecological framework was used to connect the ways a PA intervention programme had an impact (or not) on participants, and to make explicit the foundational features of the programme that facilitated positive change. In this study, we examined the evaluation of a multi-agency approach to a PA intervention programme which aimed to increase physical activity, and awareness of the importance of physical activity to key stage 2 (age 7-12) pupils in three UK primary schools. The agencies involved were the local health authority, a community based charitable organisation, a local health administrative agency, and the city school district. In examining the impact of the intervention, we adopted a process evaluation model in order to better understand the mechanisms and context that facilitated change. Therefore, the aim of this evaluation was to describe the provision, process and impact of the intervention by 1) assessing changes in physical activity levels 2) assessing changes in the student’s attitudes towards physical activity, 3) examining student’s perceptions of the child size fitness equipment in school and their likelihood of using the equipment outside of school and 4) exploring staff perceptions, specifically the challenges and benefits, of facilitating equipment based exercise sessions in the school environment. Methodology, Methods, Research Instruments or Sources Used Evaluation of the intervention was designed as a matched-control study and was undertaken over a seven-month period. The school-based intervention involved 3 intervention schools (n =436; 224 boys) and one control school (n=123; 70 boys) in a low socioeconomic and multicultural urban setting. The PA intervention was separated into two phases: a motivation DVD and 10 days of circuit based exercise sessions (Phase 1) followed by a maintenance phase (Phase 2) that incorporated a PA reward program and the use of specialist kid’s gym equipment located at each school for a period of 4 wk. Outcome measures were measured at baseline (January) and endpoint (July; end of academic school year) using reliable and valid self-report measures. The children’s attitudes towards PA were assessed using the Children’s Attitudes towards Physical Activity (CATPA) questionnaire. The Physical Activity Questionnaire for Children (PAQ-C), a 7-day recall questionnaire, was used to assess PA levels over a school week. A standardised test battery (Fitnessgram®) was used to assess cardiovascular fitness, body composition, muscular strength and endurance, and flexibility. After the 4 wk period, similar kid’s equipment was available for general access at local community facilities. The control school did not receive any of the interventions. All physical fitness tests and PA questionnaires were administered and collected prior to the start of the intervention (January) and following the intervention period (July) by an independent evaluation team. Evaluation testing took place at the individual schools over 2-3 consecutive days (depending on the number of children to be tested at the school). Staff (n=19) and student perceptions (n = 436) of the child sized fitness equipment were assessed via questionnaires post-intervention. Students completed a questionnaire to assess enjoyment, usage, ease of use and equipment assess and usage in the community. A questionnaire assessed staff perceptions on the delivery of the exercise sessions, classroom engagement and student perceptions. Conclusions, Expected Outcomes or Findings Findings showed that both the intervention (16.4%) and control groups increased their PAQ-C score by post-intervention (p < 0.05); with the intervention (17.8%) and control (21.3%) boys showing the greatest increase in physical activity levels. At post-intervention, there was a 5.5% decline in the intervention girls’ attitudes toward PA in the aesthetic subdomains (p = 0.009); whereas the control boys had an increase in positive attitudes in the health domain (p = 0.003). No significant differences in attitudes towards physical activity were observed in any other domain for either group at post-intervention (p > 0.05). The results of the equipment questionnaire, 96% of the children stated they enjoyed using the equipment and would like to use the equipment again in the future; however at post-intervention only 27% reported using the equipment outside of school in the last 7 days. Students identified the ski walker (34%) and cycle (32%) as their favorite pieces of equipment; with the single joint exercises such as leg extension and bicep/tricep machine (<3%) as their least favorite. Key themes from staff were that the equipment sessions were enjoyable, a novel activity, children felt very grown-up, and the activity was linked to a real fitness experience. They also expressed the need for more support to deliver the sessions and more time required for each session. Findings from this study suggest that a more integrated approach within the various agencies is required, particularly more support to increase teachers pedagogical content knowledge in physical activity instruction which is age appropriate. Future recommendations for successful implementation include sufficient time period for all students to access and engage with the equipment; increased access and marketing of facilities to parents within the local community, and professional teacher support strategies to facilitate the exercise sessions.

The Multi-Faceted Experience of Empathy in Intellectual Disability Settings: An IPA Study

This research thesis explored the concept of empathy. The specific purpose was to further understand the idea of empathy in relation to the experience of male support workers who provide residential care to adults with intellectual disabilities (ID) and challenging behaviour. The thesis aimed to provide some insights into how support workers develop and extract meaning from their experiences of relationships with clients and the impact of this on their own self-care, namely, self-compassion. Since personal accounts of experience were required, a qualitative methodology was employed, Interpretative Phenomenological Analysis (IPA) (Smith, 2004). This methodology was selected as it allows for the exploration and interpretation of idiographic lived experience and meaning making. 8 experienced support workers were interviewed using a semi structured interview. Four superordinate themes emerged from the data. These included: 1. Making sense of the others inner world; 2. Processes that enhance empathic practice; 3. Tensions and conflicts, and 4. Management of distressing feelings. Differing accounts of interpreting the needs of clients were identified which helped participants understand, make sense of their interpersonal experience and participate in their role. These included utilising academic knowledge and senses, particularly sight and hearing, which were seemingly complemented by a level of reflective practice. Additionally, to make sense of the experience of a client, they appeared to put themselves in their position, suggesting a form of empathy. Participants appeared to engage in a process of reflection on their relationships with clients, which helped them think about what they had learned about the person’s needs, moreover, this process enabled them to identify some of their own responses and feelings. However, participants seemed to struggle to recognise the occurrence or impact of distressing emotional experience and to express their feelings, possibly in response to a deep sense of responsibility and fear of transferring emotional distress to others. This dilemma of holding two potentially conflicting views of experience seemed to inhibit self-compassion. Although not specifically testing theories of empathy, from the overall findings, it could be suggested that empathy may be a dynamic, transient process that is influenced by reflexivity, values and context. The context in which participants discussed their practice, and situated within their accounts, suggested a sense of confusion and uncertainty. Consequently, it is suggested this impacted on how participants understood and related to clients, and to themselves. There were some specific implications for Counselling Psychology practice, mostly concerning training and supervision. These included recommendations for staff training and supervision, systemic organisational intervention, policy development, recommendations for revisions to models of specialist care frameworks and clinical training.

Likelihood-Based Inference for Partially Observed Multi-Type Markov Branching Processes

Thesis (Ph.D.)--University of Washington, 2016-08

Séquestration géologique du CO2 par carbonatation minérale dans les résidus miniers

La carbonatation minérale dans les résidus miniers est un moyen sûr et permanent de séquestrer le CO2 atmosphérique. C’est un processus naturel et passif qui ne nécessite aucun traitement particulier et donc avantageux d’un point de vue économique. Bien que la quantité de CO2 qu’il soit possible de séquestrer selon ce processus est faible à l’échelle globale, dans le cadre d’un marché du carbone, les entreprises minières pourraient obtenir des crédits et ainsi revaloriser leurs résidus. À l’heure actuelle, il y a peu d’informations pour quantifier le potentiel de séquestration du CO2 de façon naturelle et passive dans les piles de résidus miniers. Il est donc nécessaire d’étudier le phénomène pour comprendre comment évolue la réaction à travers le temps et estimer la quantité de CO2 qui peut être séquestrée naturellement dans les piles de résidus. Plusieurs travaux de recherche se sont intéressés aux résidus miniers de Thetford Mines (Québec, Canada), avec une approche principalement expérimentale en laboratoire. Ces travaux ont permis d’améliorer la compréhension du processus de carbonatation, mais ils nécessitent une validation à plus grande échelle sous des conditions atmosphériques réelles. L’objectif général de cette étude est de quantifier le processus de carbonatation minérale des résidus miniers sous des conditions naturelles, afin d’estimer la quantité de CO2 pouvant être piégée par ce processus. La méthodologie utilisée repose sur la construction de deux parcelles expérimentales de résidus miniers situées dans l’enceinte de la mine Black Lake (Thetford Mines). Les résidus miniers sont principalement constitués de grains et de fibres de chrysotile et lizardite mal triés, avec de petites quantités d’antigorite, de brucite et de magnétite. Des observations spatiales et temporelles ont été effectuées dans les parcelles concernant la composition et la pression des gaz, la température des résidus, la teneur en eau volumique, la composition minérale des résidus ainsi que la chimie de l’eau des précipitations et des lixiviats provenant des parcelles. Ces travaux ont permis d’observer un appauvrissement notable du CO2 dans les gaz des parcelles (< 50 ppm) ainsi que la précipitation d’hydromagnésite dans les résidus, ce qui suggère que la carbonatation minérale naturelle et passive est un processus potentiellement important dans les résidus miniers. Après 4 ans d’observations, le taux de séquestration du CO2 dans les parcelles expérimentales a été estimé entre 3,5 et 4 kg/m3/an. Ces observations ont permis de développer un modèle conceptuel de la carbonatation minérale naturelle et passive dans les parcelles expérimentales. Dans ce modèle conceptuel, le CO2 atmosphérique (~ 400 ppm) se dissout dans l’eau hygroscopique contenue dans les parcelles, où l’altération des silicates de magnésium forme des carbonates de magnésium. La saturation en eau dans les cellules est relativement stable dans le temps et varie entre 0,4 et 0,65, ce qui est plus élevé que les valeurs de saturation optimales proposées dans la littérature, réduisant ainsi le transport de CO2 dans la zone non saturée. Les concentrations de CO2 en phase gazeuse, ainsi que des mesures de la vitesse d’écoulement du gaz dans les cellules suggèrent que la réaction est plus active près de la surface et que la diffusion du CO2 est le mécanisme de transport dominant dans les résidus. Un modèle numérique a été utilisé pour simuler ces processus couplés et valider le modèle conceptuel avec les observations de terrain. Le modèle de transport réactif multiphase et multicomposant MIN3P a été utilisé pour réaliser des simulations en 1D qui comprennent l’infiltration d’eau à travers le milieu partiellement saturé, la diffusion du gaz, et le transport de masse réactif par advection et dispersion. Même si les écoulements et le contenu du lixivat simulés sont assez proches des observations de terrain, le taux de séquestration simulé est 22 fois plus faible que celui mesuré. Dans les simulations, les carbonates précipitent principalement dans la partie supérieure de la parcelle, près de la surface, alors qu’ils ont été observés dans toute la parcelle. Cette différence importante pourrait être expliquée par un apport insuffisant de CO2 dans la parcelle, qui serait le facteur limitant la carbonatation. En effet, l’advection des gaz n’a pas été considérée dans les simulations et seule la diffusion moléculaire a été simulée. En effet, la mobilité des gaz engendrée par les fluctuations de pression barométrique et l’infiltration de l’eau, ainsi que l’effet du vent doivent jouer un rôle conséquent pour alimenter les parcelles en CO2.