Análise da curva de resfriamento e refino de grão da liga de alumínio AA 356

The macrostructure of an alloy solidification in the raw state is of utmost importance due to its influence on mechanical properties. A structure showing columnar grains is generally undesirable in most applications of cast products and grain refining aims to suppress the formation of these grains and get a fine-grained equiaxed structure that improves the supply of liquid metal and the mechanical properties, as yield strength and tensile strength limit, as well as the tendency of formation of hot cracks. The type and size of grains formed are determined by chemical composition, cooling rate and the use of inoculum for grain refining. Titanium and boron are the major refiners in the aluminum industry and can be added to the molten metal in the form of alloys such as Al-Ti, Al-Ti-B or Al-B. In this paper we will discuss the information obtained from cooling curves and first derivative of the cooling curve to obtain the thermal parameters that influence the process of grain refining alloy AA 356.0

Estudo do efeito do modificador Al-Sr no tratamento de modificação do eutético da liga AA356

The AA356 alloy is an alloy widely used in the automotive industry and aerospace due to its excellent mechanical properties. Refining the structure of eutectic silicon aluminum alloys is a fairly common practice in the foundry through treatment known as modification. This can be achieved by modifying agent adding chemicals such as contained in groups I and IIa of the periodic table and rare earths (europium, céreioi, praseodymium, neodymium, etc.). Has the ability to modify the structure of the eutectic, but only sodium and strontium produce an action modifier strong when used in low concentrations. The modifying effect of the shafts turn silicon into a fibrous form and branched surrounded by metallic matrix in the form of a composite structure that has the highest limit of tensile strength, ductility and machinability. In this work will be obtained ingots with and without the modifier type Al-10% Sr, made in sand molds and are generated and analyzed cooling curves and also the study of the macrostructure and microstructure of the solidified material. It was found that by adding the Al-Sr made shorten the solidification time and lower the grain size

Determinação de metais pesados no caranguejo comestível Ucides cordatus (Crustacea: Decapoda)

Não disponível

Evolução da tectônica rúptil no nordeste do Brasil baseada na termocronologia por traço de fissão em apatita

Results of apatite fission tracks from twelve samples collected across a Borborema Province transect, northeastern Brazil, revealed two major paleothermal events: a cooling event occurred between Albian and late Cenomanian (110 - 80 Ma) and a second cooling event starting on early Paleocene (66 Ma). Given the wide expression of the studied area (sampling trend along four brazilian states) a correlation between the distribution of fission track data and the current geological / geomorphological scenario was made possible, considering the area’s tectono - stratigraphic past and its thermochronologic evolution until now. The fact that the employed thermochronologic tool relates to a relatively shallow geothermometer, substancially information for understanding the behavior of basement brittle tectonic was achieved. These data were used to analyze faults origin and reactivation, associated with sedimentary basins evolution in the context of South America - Africa continental breakup.

Uso das técnicas de difusão em filmes finos por gradiente de concentração (DGT) para avaliação de metais disponibilizados em passivos de mineração de Urânio

The objective of this work is to use the technique of diffusion by concentration gradient films (DGT) for evaluation of dissolved urano in hydro bodies. For this we chose this work as a systems investigation of water bodies in the region of Poços de Caldas, state of Minas Gerais, because, there is a large amount of mining of uranila. The technique to be used to evaluate the potential for dissolved metals analysis involves the use of passive samplers with application in in situ. This allows detection with excellent sensitivity and selectivity allowing the determination of the labile fraction of dissolved metals

Proposta de conector para ensaios de ligações CDE submetidas à tração perpendicular as fibras em madeira de pinus

The growth of urban population associated with the shortage of supply of public infrastructure such as hospitals, kindergartens, schools, among others, has reinforced the need to develop alternative methods that simplify the construction processes and allows for a reduction in these costs works. The conventional processes have increasingly been shown ineffective to solve the problem of demand for different types of urban and rural buildings. Given this fact, industrial construction processes can gain space and have proven to be highly interesting to solve the above problems, in particular, considering the cost-effective and time. Therefore, this study aimed to determine the influence of moisture on the strength of metal plate connections connectors (printed plate with teeth). For the sizing of the links between structural lumber using metal connectors with teeth prints; controlled process variables (drying of the wood and the different moisture contents), and finally found results and compare them with different literatures order to obtain a qualitative efficiency of the process. Some specimens had very low expectations, can be explained by the presence of bone marrow, and pre-existing cracks. Thus, the results were discarded for further analysis and more accurate results

Estudo da variação do limite de resistência à tração ao longo da bobina de vergalhão de alumínio 1350 AA

Therebar of aluminum 1350 AA produced by CBA are used inthe manufacture of wires and cables for electric power transmission, which marketshows increasingly favorableto aluminum due to itslow densityand high electrical conductivity, but to ensure that this materialmeets all specifications of projectsfor electricity transmission, it must have homogeneity in the chemicaland mechanicalproperties.One of the points of improvement in the process of rod production isreducing the high variation of the limitof tensile strengthalong the coils, therefore, this work seeks a better understanding of the factors that significantly influence the mechanical properties of rebar, specifically assessing the influence oftemperatureat the output of the coils, which can cause a recovery effect on the material andif thereare relevantdifferences between the two modes of rebar production: auto and manual.Samples of six coils have been specifically produced forthis study, which weresubsequently subjected to different annealing temperatures for one hour and ten minutes, similar to what occurs in the output of the coil from the machine. The tensile tests showed that aluminum 1350 AA is significantly influenced by temperature, whose behavior was very similar to that presented in the literature. It was found that the phenomenon of recovery occurred more significantly at high temperatures. Through the optical electron microscope Zeiss, 18 surface maps were made with 100x magnification for each sample in different conditions and the images were analyzed using entropy and fractal dimension, aiming to relate the condition of surface hardening on mechanical property of the samples in that condition. The results showed that these methods can be applied, provided they do not have any kind of imperfection on the surface, once they can influence the results. The study concluded that a more efficient cooling is required in ... (Complete abstract click electronic access below)

Análise de falhas por fadiga de alto ciclo em eixos de transmissão utilizando o método dos elementos finitos

This work presents a study that aims to validate the fatigue analyses developed on finite element commercial software, ANSYS Workbench. It was based on mechanical tests development of traction and hardness, to verify the mechanical properties of material that the shaft was manufactured (ABNT 1045 steel), it was developed bend test, with purpose to prove the confiability degree of computational analyses, obtaining the maximum stress in a work condition determined with 40 [kgf] of load applied, and at the end, was developed the fatigue test to obtain the number of cycles that the transmission shaft can support in a work condition with 8 [kgf] of load applied. The results obtained during the work present, have to be quite satisfactory with the theoretically expected

Avaliação do efeito ambiental nas propriedades mecânicas e viscoelásticas de compósitos híbridos de titânio/fibra de carbono/resina epóxi

Hybrid composites combining metal plates and laminates with continuous fiber reinforced polymer, called fiber-metal (CHMF), have been particularly attractive for aerospace applications, due mainly to their high mechanical strength and stiffness associated with low density. These laminates (CHMF) consist of a sandwich structure consisting of layers of polymer composites and metal plates, stacked alternately. This setting allows you to combine the best mechanical performance of polymer composites reinforced with long fibers, to the high toughness of metals. Environmental effects should always be considered in the design of structural components, because these materials in applications are submitted to the effects of moisture in the atmosphere, the large cyclical variations of temperature around 82 ° C to -56 ° C, and high effort mechanical. The specimens of fibermetal composite were prepared at EMBRAER with titanium plates and laminates of carbon fiber/epoxy resin. This study aims to evaluate the effect of different environmental conditions (water immersion, hygrothermal chamber and thermal shock) of laminate hybrid titanium/carbon fiber/epoxy resin. The effects of conditioning were evaluated by interlaminar shear tests - ILSS, tensile, and vibration free

Controle de velocidade e tração de rodas independentes para veículos elétricos

This work presents a proposal to replace thetraditional system of traction electric car that usesone electric motor and a mechanical differential, by two electric motors of lower power, controlled byelectronic control low cost. The proposed control isopen loop and uses the technique of Pulse WidthModulation (PWM), discrete and synchronizedaiming to reduce the generation of harmonics. The implementation of two smaller motor one on each wheel-drive distributes the weight of the vehicle, improving the heat exchange of the windings,beyond enable the power components supporting a current of 50% predicted for only one motor . The solution adopted for being open-loop, has a similar behavior to the mechanical differential, where theeffort imposed by the trajectory makes the velocity distribution between the wheels be appropriate tovehicle trajectory

Influência das substâncias húmicas aquáticas na genotoxicidade dos metais em tilápias do Nilo (Oreochromis niloticus)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Vocativos e o traço basicamente orientador da interação na Gramática Textual-Interativa

Within Textual-interactive Grammar, discourse markers are defined through a particular combination of linguistic features. One of them concerns the interactive role of discourse markers, and it is called “basic orientation of interaction”. As other authors have shown, this feature applies to expressions that play the following functions: Checking, Feedback, Injunction or Initiation. In this paper, we try to demonstrate that the feature under consideration also applies to Vocatives.

Metais pesados: fonte e ação toxicológica

A contaminação do solo pelo descarte de substâncias tóxicas adquiriu, nos últimos anos, maior atenção da comunidade científica a qual tem alertado a população dos países, em geral, para as conseqüências, em especial, as patologias que podem ocorrer quando estas substâncias adentram nossa cadeia alimentar. Neste trabalho procurou-se apresentar as fontes de contaminação e a toxicidade do cádmio, do chumbo, do mercúrio e do manganês, quando estes se encontram em níveis elevados no solo e nos mananciais superficiais e subterrâneos. Com relação aos três primeiros metais, sua alta dosagem pode provocar, no ser humano, diversos tipos de câncer, lesões no estômago e pulmões, além de alterações importantes nos sistemas imunológico e nervoso central. O manganês, um dos metais mais comuns da crosta terrestre, largamente utilizado pela indústria e disponibilizado, em grandes quantidades no meio ambiente, em doses elevadas pode causar doenças pulmonares e neurológicas.

Teores elevados de metais potencialmente tóxicos em amostras de fertilizantes

A contaminação do solo por metais potencialmente tóxicos constitui um dos principais problemas ambientais. Por meio da lixiviação e percolação das águas, esses metais podem ser mobilizados e vir a contaminar mananciais superficiais e subterrâneos, comprometendo sua qualidade. A biodisponibilização desses metais para as plantas e, a partir dessas, para o homem é outro desfecho negativo dessa situação. O cádmio é um elemento tóxico. Os teores encontrados nos solos costumam não oferecer riscos. Porém, esses teores são potencializados pela utilização de fertilizantes. O níquel pode ser carcinogênico em doses elevadas. Sua presença em fertilizantes fosfatados proporciona maiores concentrações do metal no solo. É amplo o registro sobre efeitos do excesso desses metais, tanto em plantas, quanto em animais e no ser humano. O manganês é um dos elementos mais abundantes na crosta terrestre e se encontra largamente distribuído em solos, sedimentos, rochas, água e materiais biológicos. Contrariamente aos dois metais anteriores, esse micronutriente é um elemento essencial ao ser humano. Sua carência causa inúmeras enfermidades, por outro lado, seu excesso também. Nesse caso, poucos são os relatos sobre o assunto. Nesse estudo foram utilizados métodos de extração de metais de fertilizantes e se constatou que, quando presentes, os metais cádmio e níquel apresentaram concentrações proibitivas o que é motivo de preocupação e demonstra a falta de controle sobre a indústria de insumos agrícolas. Para o manganês não há parâmetros orientadores com limites de teores, mas com certeza, são necessários trabalhos nesse sentido para se evitar seu consumo indiscriminado.

A simplificação como traço de um habitus tradutório para a Antropologia Brasileira em língua inglesa: um estudo baseado no corpus da oba O Povo Brasileiro de Darcy Ribeiro

The main purpose of this article is to investigate the social and linguistic behaviors of a translator, analyzing the use of simplification aspects in the translational process into English of the Anthropology developed by Darcy Ribeiro. With this aim, we used a parallel corpus composed by the work O povo brasileiro (1995) and by its respective translation, performed by Rabassa. The methodology used is that of Corpus-Based Translation Studies (BAKER, 1993, 1995, 1996; CAMARGO, 2005, 2007), Corpus Linguistics (BERBER SARDINHA, 2004) and Terminology (BARROS, 2004). We also adopted Sociology of Translation theories (SIMEONI, 1998, 2007; GOUANVIC,1999, 2005), as well as the habitus conception, proposed by Bourdieu (1980). Results show that this simplification may be found in Ribeiro’s translated texts, indicating the difficulties of conceptualizing the Brazilian universe in English