Numerical solution to the Saffman-Taylor finger problem with kinetic undercooling regularisation

The Saffman-Taylor finger problem is to predict the shape and,in particular, width of a finger of fluid travelling in a Hele-Shaw cell filled with a different, more viscous fluid. In experiments the width is dependent on the speed of propagation of the finger, tending to half the total cell width as the speed increases. To predict this result mathematically, nonlinear effects on the fluid interface must be considered; usually surface tension is included for this purpose. This makes the mathematical problem suffciently diffcult that asymptotic or numerical methods must be used. In this paper we adapt numerical methods used to solve the Saffman-Taylor finger problem with surface tension to instead include the effect of kinetic undercooling, a regularisation effect important in Stefan melting-freezing problems, for which Hele-Shaw flow serves as a leading order approximation when the specific heat of a substance is much smaller than its latent heat. We find the existence of a solution branch where the finger width tends to zero as the propagation speed increases, disagreeing with some aspects of the asymptotic analysis of the same problem. We also find a second solution branch, supporting the idea of a countably infinite number of branches as with the surface tension problem.

Development of the response coefficient-root function method for the transient vibration serviceability design of flat concrete floors

The vibration serviceability limit state is an important design consideration for two-way, suspended concrete floors that is not always well understood by many practicing structural engineers. Although the field of floor vibration has been extensively developed, at present there are no convenient design tools that deal with this problem. Results from this research have enabled the development of a much-needed, new method for assessing the vibration serviceability of flat, suspended concrete floors in buildings. This new method has been named, the Response Coefficient-Root Function (RCRF) method. Full-scale, laboratory tests have been conducted on a post-tensioned floor specimen at Queensland University of Technology’s structural laboratory. Special support brackets were fabricated to perform as frictionless, pinned connections at the corners of the specimen. A series of static and dynamic tests were performed in the laboratory to obtain basic material and dynamic properties of the specimen. Finite-element-models have been calibrated against data collected from laboratory experiments. Computational finite-element-analysis has been extended to investigate a variety of floor configurations. Field measurements of floors in existing buildings are in good agreement with computational studies. Results from this parametric investigation have led to the development of new approach for predicting the design frequencies and accelerations of flat, concrete floor structures. The RCRF method is convenient tool to assist structural engineers in the design for the vibration serviceability limit-state of in-situ concrete floor systems.

Developments in measuring the “creative” workforce

This article outlines the contribution the ARC Centre of Excellence for Creative Industries and Innovation has made to the project to improve statistical parameters for defining the “creative” workforce. This is one approach which addresses the imprecision of official statistics in grasping the emergent nature of the creative industries. The article discusses the policy implications of the differences between emphasizing industry and occupation or workforce. It provides qualitative case studies that provide further perspectives on quantitative analysis of the creative workforce. It also outlines debates about the implications for the cultural disciplines of an evidence-based account of creative labour. The “creative trident” methodology is summarized: it is the total of creative occupations within the core creative industries (specialists), plus the creative occupations employed in other industries (embedded) plus the business and support occupations employed in creative industries who are often responsible for managing, accounting for and technically supporting creative activity (support). The method is applied to the arts workforce in Australia. An industry-facing spin-off from the centre's mapping work, Creative Business Benchmarker, is discussed. The implications of this approach to the creative workforce is raised and exemplified in case studies of design and of the health industry.

Machine learning techniques to improve software quality

A significant proportion of the cost of software development is due to software testing and maintenance. This is in part the result of the inevitable imperfections due to human error, lack of quality during the design and coding of software, and the increasing need to reduce faults to improve customer satisfaction in a competitive marketplace. Given the cost and importance of removing errors improvements in fault detection and removal can be of significant benefit. The earlier in the development process faults can be found, the less it costs to correct them and the less likely other faults are to develop. This research aims to make the testing process more efficient and effective by identifying those software modules most likely to contain faults, allowing testing efforts to be carefully targeted. This is done with the use of machine learning algorithms which use examples of fault prone and not fault prone modules to develop predictive models of quality. In order to learn the numerical mapping between module and classification, a module is represented in terms of software metrics. A difficulty in this sort of problem is sourcing software engineering data of adequate quality. In this work, data is obtained from two sources, the NASA Metrics Data Program, and the open source Eclipse project. Feature selection before learning is applied, and in this area a number of different feature selection methods are applied to find which work best. Two machine learning algorithms are applied to the data - Naive Bayes and the Support Vector Machine - and predictive results are compared to those of previous efforts and found to be superior on selected data sets and comparable on others. In addition, a new classification method is proposed, Rank Sum, in which a ranking abstraction is laid over bin densities for each class, and a classification is determined based on the sum of ranks over features. A novel extension of this method is also described based on an observed polarising of points by class when rank sum is applied to training data to convert it into 2D rank sum space. SVM is applied to this transformed data to produce models the parameters of which can be set according to trade-off curves to obtain a particular performance trade-off.

Perioperative mortality after hemiarthroplasty related to fixation method : a study based on the Australian Orthopaedic Association National Joint Replacement Registry

Background and purpose: The appropriate fixation method for hemiarthroplasty of the hip as it relates to implant survivorship and patient mortality is a matter of ongoing debate. We examined the influence of fixation method on revision rate and mortality.----- ----- Methods: We analyzed approximately 25,000 hemiarthroplasty cases from the AOA National Joint Replacement Registry. Deaths at 1 day, 1 week, 1 month, and 1 year were compared for all patients and among subgroups based on implant type.----- ----- Results: Patients treated with cemented monoblock hemiarthroplasty had a 1.7-times higher day-1 mortality compared to uncemented monoblock components (p < 0.001). This finding was reversed by 1 week, 1 month, and 1 year after surgery (p < 0.001). Modular hemiarthroplasties did not reveal a difference in mortality between fixation methods at any time point.----- ----- Interpretation: This study shows lower (or similar) overall mortality with cemented hemiarthroplasty of the hip.

Performing the unutterable : mapping the experiential in contemporary dance

This research project looks to engage audiences in a variety of experiential ways by reexamining and manipulating the traditional presentation paradigm for viewing Western contemporary dance. It considers how the audience may be situated in the creation and presentation of contemporary dance generally, and specifically in the work The Voyeur, which researched these issues in action. By situating the body of the audience member as a site of understanding and meaning making, this practice-based research considers the audience within the artists’ creative process from the inception of a creative work, rather than after the work has been created. The research questions how a ‘lived experience’ of contemporary dance could be deepened for the audience. It presents a series of ‘tools’ to create alternative frameworks of presentation that challenge the dominant modes of creation, presentation and meaning making in contemporary dance. The five tools established and applied in this research are: site, liminality, agency, proximity and performer authenticity. These tools are framed as a series of calibrated scales that allow choreographers to map decisions made in the studio in relation to potential audience engagement. These scales have the ability to house multiple presentation formats from the traditional to the avant garde and open up possibilities for broad analysis of a wide range of artistic dance works.

Must see TV : mapping an Australian mediasphere

Australian National Cinema and Australian Television Culture. These two books, magisterial accounts of Australian media cultures, are very different. The first analyses (according to its cover blurb) 'the distinct and diverse nature of Australian cinema'; the second offers 'a picture of Australian television'. The books share an author.2 Despite this, their objects of study are constituted very differently. The first is replete with examples of particular films, analyses of their representational strategies, and links to the social context of production. The second addresses almost no programs and those that are mentioned appear only in passing. There is no analysis of any particular television text. The difference between these books cannot be explained in terms of authorial fickleness: rather, it represents the different ways in which television and film have been constructed as objects of study. While film has a recognised canon and a tradition of close textual analysis, in the study of television the programs themselves have tended to vanish - as they do in Australian Television Culture. Most academic work on Australian television is not interested in its programs. Writers have tended to find other aspects more rewarding: industries, institutions, ownership, legislation, technology and production.3 Australian Television Culture is part of this tradition; and an example of how such work, done well, can be a useful contribution to understanding the medium.

Minimising wave drag for free surface flow past a two-dimensional stern

Free surface flow past a two-dimensional semi-infinite curved plate is considered, with emphasis given to solving for the shape of the resulting wave train that appears downstream on the surface of the fluid. This flow configuration can be interpreted as applying near the stern of a wide blunt ship. For steady flow in a fluid of finite depth, we apply the Wiener-Hopf technique to solve a linearised problem, valid for small perturbations of the uniform stream. Weakly nonlinear results found using a forced KdV equation are also presented, as are numerical solutions to the fully nonlinear problem, computed using a conformal mapping and a boundary integral technique. By considering different families of shapes for the semi-infinite plate, it is shown how the amplitude of the waves can be minimised. For plates that increase in height as a function of the direction of flow, reach a local maximum, and then point slightly downwards at the point at which the free surface detaches, it appears the downstream wavetrain can be eliminated entirely.

A systematic, tool-supported method for conducting literature reviews in information systems

While the importance of literature studies in the IS discipline is well recognized, little attention has been paid to the underlying structure and method of conducting effective literature reviews. Despite the fact that literature is often used to refine the research context and direct the pathways for successful research outcomes, there is very little evidence of the use of resource management tools to support the literature review process. In this paper we want to contribute to advancing the way in which literature studies in Information Systems are conducted, by proposing a systematic, pre-defined and tool-supported method to extract, analyse and report literature. This paper presents how to best identify relevant IS papers to review within a feasible and justifiable scope, how to extract relevant content from identified papers, how to synthesise and analyse the findings of a literature review and what are ways to effectively write and present the results of a literature review. The paper is specifically targeted towards novice IS researchers, who would seek to conduct a systematic detailed literature review in a focused domain. Specific contributions of our method are extensive tool support, the identification of appropriate papers including primary and secondary paper sets and a pre-codification scheme. We use a literature study on shared services as an illustrative example to present the proposed approach.

Defining and mapping teacher practice in technology classrooms

The indecision surrounding the definition of Technology extends to the classroom as not knowing what a subject “is” affects how it is taught. Similarly, its relative newness – and consequent lack of habitus in school settings - means that it is still struggling to find its own place in the curriculum as well as resolve its relationship with more established subject domains, particularly Science and Mathematics. The guidance from syllabus documents points to open-ended student-directed projects where extant studies indicate a more common experience of teacher –directed activities and an emphasis on product over process. There are issues too for researchers in documenting classroom observations and in analysing teacher practice in new learning environments. This paper presents a framework for defining and mapping classroom practice and for attempting to describe the social practice in the Technology classroom. The framework is a bricolage which draws on contemporary research. More formally, the development of the framework is consonant with the aim of design-based research to develop a flexible, adaptive and generalisable theory to better understanding a teaching domain where promise is not seen to match current reality. The framework may also inform emergent approaches to STEM (Science, Technology, Education and Mathematics) in education.

Researching employment relations : a self-reflexive analysis of a multi-method, school-based project

Drawing on primary data and adjunct material, this article adopts a critical self-reflexive approach to a three-year, Australian Research Council-funded projectthat explored themes around 'employment citizenship'for high school students in Queensland. The article addresses three overlapping areas that reflect some of the central dilemmas and challenges arising through the project- consent in the context of research ethics, questionnaire administration in schools, and focus group research practice. It contributes to the broader methodological literature addressing research with young people by canvassing pragmatic suggestions for future school-based research, and research addressing adolescent employment.