958 resultados para grating with variable spacing
Resumo:
The knowledge on spatial distribution of soil properties by means of geostatistics is important as an indicator for a better soil use and management. This study aimed at evaluating the spatial distribution of soil chemical properties, in a forest and pasture area in Manicoré, Amazonas State, Brazil. Grids with 70.00 m x 70.00 m, with regular spacing of 10.00 m x 10.00 m, totaling 64 points, were established, and then soil samples were collected at the depths of 0.0-0.20 m and 0.40-0.60 m and had their chemical properties determined. Data were analyzed by using descriptive statistics and geostatistics, and the sampling density analysis was based on the coefficient of variation and semivariograms range. The mean and median values were adjusted to the closest values, indicating normal distribution, while the spherical, exponential and gaussian models were adjusted to the soil chemical properties. It was concluded that the geostatistics provided adequate information for understanding the spatial distribution. The forest area showed a higher spatial continuity and the pasture area a lower sampling density. The chemical properties showed differences in the spatial variability, while the range represented better the estimates for sampling density and spacing, in the forest and pasture area.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Better knowledge of the anthropogenic soils can help create future scenarios for the Amazon region through information that supports the sustainable planning. The aim of this study was to evaluate the spatial variability of soil physical anthropogenic and not anthropogenic in the region of Manipur, AM. In the study area we selected two, one with no anthropogenic soils (native forest) and another with anthropogenic soils (black earth archaeological). In each area, we established a grid measuring 70 x 70 m and the soils were sampled at the points of intersection of the grid with regular spacing of 10 by 10 feet, making a total of 64 sampling points in each landscape. Soil samples were collected at a depth from 0.0 to 0.10 I did the analyzes physical (texture, bulk density, macroporosity, microporososidade, porosity and aggregate stability). Then, the data were subjected to descriptive statistics and geostatistics. It was found that the anthropogenic and non-anthropogenic soils showed different behaviors in relation ace their spatial structures. The spatial variability that prevailed in anthropogenic and non-anthropogenic soil was moderate and weak indicating that these soils are strongly linked to changes in the soil by extrinsic factors. The soil was observed anthropogenic best results for total porosity, microporosity and bulk density, showing superior characteristics compared for agronomic soil not anthropogenic. And the range of values found in the above two areas were used in the mesh, showing greater spatial continuity in these environments.
Resumo:
Pós-graduação em Zootecnia - FCAV
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
This experiment was conducted to evaluate the effect of grazing heights on daytime behavioral activities of Nellore beef cattle in the rainy season. The experimental area was 12 hectares divided into paddocks of one hectare each. The treatments consisted of four defoliation heights (15, 30, 45 and 60 cm) in pastures of Brachiaria brizantha cv. Xaraes with three replicates each. It was used the continuos grazing method, with variable stocking rate. Forage samples collected on the plots were sent to the laboratory for separation of the botanical components, weighing and determination of dry matter, with the material collected by simulated grazing. The variables: grazing time, idle time and ruminating time were evaluated for 12 consecutive hours on days 15 and 16 February 2011, considering the morning and afternoon periods. It was used a completely randomized design. The height of the canopy significantly influenced the daily grazing time and ruminating time, with a quadratic response as a function of time of defoliation. The bite rate decreased as a function of heights studied. However the chemical composition of the material collected by simulated grazing did not differ between treatments. Xaraes grass swards grazed at around 45 cm height provide greater ease of apprehension by grazing cattle.
Resumo:
The production of grazing cattle has been very interesting, due to the low cost to produce fodder, compared to other sources of forage used to feed these animals, but the adequate management pasture has high influence on the success and profitability of cattle production systems. Thus, the objective of this study was to determine the optimum grazing height of Brachiaria brizantha cv. Xaraes, which provides the highest individual weight gain and gain per area. The stocking rate was continuous, with variable stocking rate. The experimental period was from January to December 2010. Three Nellore males were used in each experimental plot, and, when needed, additional animals were used for adjusting the desired heights. Monthly sampling was obtained to estimate forage mass (kg.ha(-1) of DM) and the structural characteristics of the pastures, such as, leaf: stem ratio. The animals were weighed at the beginning of the experiment and every 28 days, after 12 hours of fasting, to measure the average daily gain (ADG) After weighings were performed adjustments stocking rate to desired heights. Throughout the experimental period the animals received mineral supplementation. The desired sward heights were 15, 30, 45 and 60 cm, with three replicates each. The experimental design was completely randomized with four treatments and three replications. To body weight gain (BWG) and average daily gain (ADG), each animal was considered an experimental unit. To gain per area and stocking rate, the paddock was considered the experimental unit. The leaf: stem ratio showed a linear increasing behavior in the spring and summer seasons. The smaller grazing heights provided higher gain per unit area (812.15 kg ha(-1)), while the highest grazing heights promoted high individual weight gain (0.790 kg.dia(-1)). The results suggest that Xaraes grass pastures should be grazed between 30 and 45 cm to allow reasonable performances by area and individual performances.
Resumo:
The objective of this study was to determine the best height of the Tanzania grass under grazing, assessing morphological and productive characteristics of the sward. This experiment was conducted in Cidade Gaucha, Parana, where he was rated the accumulation rate and morphological characteristics of Tanzania grass pastures grazed at 20, 40, 60 and 80 cm grazing under continuous stocking with variable stocking rate for beef cattle. The experimental area was 12 hectare divided in paddocks of one hectare each. For each paddock were allocated two grazing exclusion cage for estimating herbage accumulation, and eight samples were taken every 28 days throughout the year 2010. The completely randomized design. The herbage mass of the morphological structures showed a linear positive function of sward heights. The height of defoliation did not influence the rate of herbage accumulation for any of the morphological structures: green leaf, stem + sheaths and senescent material. There were also no differences in leaf: stem ratio. All heights within the range studied provided adequate number of green leaves per tiller. Tanzania grass pastures grazed under continuous stocking between 40 and 60 cm, for providing a good association between accumulation and mass of green leaf blades, and acceptable values of the mass of stem + sheaths and senescent material. Pasture of Tanzania grass under 60 and 80 cm allow of leaves satisfactory accumulation in the autumn.
Resumo:
The present work aims to conduct a study of the economic feasibility of the implementation of variable frequency inverters in pump systems with variable flow rates. The concern with the reduction of energy expenditure in industries raised in 2001 due to the energy crisis that hit Brazil at that time, forcing industries to reduce their electric costs under penalty of fines if this were not done (MOREIRA, 2008). Frequency inverter is an electronic device that allow greater control in the operation of pumping systems and also a reduction in electrical consumption, being a viable solution to achieve a reduction in energy consumption. For the development of this work, approaching important topics in pumping systems was necessary in order to make a correct choice of hydraulic pumping and also other components responsible for the operation of the system , such as electric motors and frequency inverters. In the case study, a theoretical analysis of the behavior of electrical consumption in systems with variable flow rates was performed, comparing when the system is operated via frequency inverters and when the system is operated without such a device. As expected, the result of the implantation of the device was quite satisfactory, and the primary goal of reducing energy expenditure was achieved. Also important to highlight the environmental issue of this work, as all forms of energy production affects nature in some way, achieving a reduction in consumption also contributes indirectly in environmental conservation
Resumo:
Pós-graduação em Agronomia (Ciência do Solo) - FCAV
Resumo:
Pós-graduação em Engenharia Elétrica - FEIS
Resumo:
Pós-graduação em Engenharia Elétrica - FEIS
Resumo:
Introduction: Psychogenic dysphonia is a functional disorder with variable clinical manifestations.Objective: To assess the clinical and vocal characteristics of patients with psychogenic dysphonia in a case series.Methods: The study included 28 adult patients with psychogenic dysphonia, evaluated at a University hospital in the last ten years. Assessed variables included gender, age, occupation, vocal symptoms, vocal characteristics, and videolaryngostroboscopic findings.Results: 28 patients (26 women and 2 men) were assessed. Their occupations included: housekeeper (n = 17), teacher (n = 4), salesclerk (n = 4), nurse (n = 1), retired (n = 1), and psychologist (n = 1). Sudden symptom onset was reported by 16 patients and progressive symptom onset was reported by 12; intermittent evolution was reported by 15; symptom duration longer than three months was reported by 21 patients. Videolaryngostroboscopy showed only functional disorders; no patient had structural lesions or changes in vocal fold mobility. Conversion aphonia, skeletal muscle tension, and intermittent voicing were the most frequent vocal emission manifestation forms.Conclusions: In this case series of patients with psychogenic dysphonia, the most frequent form of clinical presentation was conversion aphonia, followed by musculoskeletal tension and intermittent voicing. The clinical and vocal aspects of 28 patients with psychogenic dysphonia, as well as the particularities of each case, are discussed. (C) 2014 Associacao Brasileira de Otorrinolaringologia e Cirurgia Cervico-Facial. Published by Elsevier Editora Ltda. All rights reserved.
Resumo:
In this work, crystalline titanium dioxide (TiO2) nanoparticles with variable average crystallite sizes (e.g., 8 nm) and surface areas (e.g., 192 m² g-1) were synthesized in pure anatase phase using H2O2 to reduce the hydrolysis rate of the titanium ions. An isopropanol (IP) solution was employed as the reaction medium. The TiO2 nanoparticles were characterized by powder X-ray diffraction analysis (XRD), Raman spectroscopy and transmission electron microscopy (TEM). By changing the synthesis parameters it was possible to control nanoparticle size and avoid the coalescence process. A dependence of the Raman wavenumber on the nanocrystal sizes was determined, which is quite useful for a quick check of the size of TiO2 nanocrystals.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)