Designing in caves: using immersive visualisations in design practice

This paper describes a study of the use of immersive Virtual reality technologies in the design of a new hospital. It uses Schön’s concept of reflective practice and video-based methods to analyse the ways design teams approach and employ a full scale 3D immersive environment – a CAVE – in collaborative design work. The analysis describes four themes relating to reflective practice occurring in the setting: orienting to the CAVE technology itself, orienting to the representation of the specific design within the CAVE, activities accounting for, or exploring alternatives within the design for the use and users of the space, and more strategic interactions around how to best represent the design and model to the client within the CAVE setting. The analysis also reveals some unique aspects of design work in this environment. Perhaps most significantly, rather than enhancing or adding to an existing understanding of design through paper based or non-immersive digital representations, it is often acting to challenge or surprise the participants as they experience the immersive, full scale version of their own design.

Minimization of stock weight during close-die forging of a spindle

In this paper, Finite Element method and full-scale experiments have been used to study a hot forging method for fabri-cation of a spindle using reduced initial stock size. The forging sequence is carried out in two stages. In the first stage, the hot rolled cylindrical billet is pre-formed and pierced in a closed die using a spherical nosed punch to within 20 mm of its base. This process of piercing or impact extrusion leads to high strains within the work piece but requires high press loads. In the second stage, the resulting cylinder is placed in a die with a flange chamber and upset forged to form a flange. The stock mass is optimized for complete die filling. Process parameters such as effective strain distribution, material flow and forging load in different stages of the process are analyzed. It is concluded from the simulations that minor modifications of piercing punch geometry to reduce contact between the punch and emerging vertical walls of the cylinder appreciably reduces the piercing load. In the flange chamber, a die surfaces angle of 52° instead of 45° is pro-posed to ensure effective material flow and exert sufficient tool pressure to achieve complete cavity filling. In order to achieve better compression, it is also proposed to shorten both the length of the inserted punch and the die “tongues” by a few mm.

Detaljhandelns användande av frontlinjepersonalen, som betydelsefull faktor för kundrelationer och skapande av intäkt

Syftet med denna studie var att komma fram till om kedjeföretag inom detaljhandeln intagit ett serviceperspektiv, där fokus ligger på relationer. Detta genom att undersöka hur aktörerna använder sin frontlinjepersonal. En kvalitativ flerfallstudie har genomförts där tre kedjeföretag bidragit med information rörande transaktions- eller relationsorienterad försäljning, medarbetarskap och betraktande av frontlinjepersonalen. Utgångspunkten för analys av fallstudierna har varit två intervjuer per företag. Dels med butikens högste chef samt med en medarbetare. Det teoretiska ramverket i denna studie rörande medarbetarskap, skapande av värde/nytta för kund samt intern marknadsföring som möjliggör att kund upplever hög tjänstekvalité, signalerar ett tankesätt inom ett serviceperspektiv och används för att svara på syftet. Huruvida kedjeföretagen intagit ett serviceperspektiv fullt ut, är inte möjligt att konkludera i denna småskaliga forskningsuppsats. Vidare forskning är nödvändig. Resultatet från de undersökta företagen i denna studie visar på tendenser till att utveckla ett serviceperspektiv med fokus på goda kundrelationer, vilket är det som skall ge framgång. De undersökta kedjeföretagen skiljer sig dock åt vad gäller intagandet av ett serviceperspektiv. Exempelvis förlitar sig ett företag alltjämt till lågt pris och produktens egenskaper som primära faktorer för intäktsskapande, medan andra premierar det personliga mötet.

Photovoltaic System Design for a Contaminated Area in Falun – Comparison of South and East- West Layout

In this thesis the solar part of a large grid-connected photovoltaic system design has been done. The main purpose was to size and optimize the system and to present figures helping to evaluate the prospective project rationality, which can potentially be constructed on a contaminated area in Falun. The methodology consisted in PV market study and component selection, site analysis and defining suitable area for solar installation; and system configuration optimization based on PVsyst simulations and Levelized Cost of Energy calculations. The procedure was mainly divided on two parts, preliminary and detailed sizing. In the first part the objective was complex, which included the investigation of the most profitable component combination and system optimization due to tilt and row distance. It was done by simulating systems with different components and orientations, which were sized for the same 100kW inverter in order to make a fair comparison. For each simulated result a simplified LCOE calculation procedure was applied. The main results of this part show that with the price of 0.43 €/Wp thin-film modules were the most cost effective solution for the case with a great advantage over crystalline type in terms of financial attractiveness. From the results of the preliminary study it was possible to select the optimal system configuration, which was used in the detailed sizing as a starting point. In this part the PVsyst simulations were run, which included full scale system design considering near shadings created by factory buildings. Additionally, more complex procedure of LCOE calculation has been used here considered insurances, maintenance, time value of money and possible cost reduction due to the system size. Two system options were proposed in final results; both cover the same area of 66000 m2. The first one represents an ordinary South faced design with 1.1 MW nominal power, which was optimized for the highest performance. According to PVsyst simulations, this system should produce 1108 MWh/year with the initial investment of 835,000 € and 0.056 €/kWh LCOE. The second option has an alternative East-West orientation, which allows to cover 80% of occupied ground and consequently have 6.6 MW PV nominal power. The system produces 5388 MWh/year costs about 4500,000 € and delivers electricity with the same price of 0.056 €/kWh. Even though the EW solution has 20% lower specific energy production, it benefits mainly from lower relative costs for inverters, mounting and annual maintenance expenses. After analyzing the performance results, among the two alternatives none of the systems showed a clear superiority so there was no optimal system proposed. Both, South and East-West solutions have own advantages and disadvantages in terms of energy production profile, configuration, installation and maintenance. Furthermore, the uncertainty due to cost figures assumptions restricted the results veracity.

Application Of Real-Time Control Strategy To Improve Nitrogen Removal In Wastewater Treatment

Biological nitrogen removal is an important task in the wastewater treatment. However, the actual removal of total nitrogen (TN) in the wastewater treatment plant (WWTP) is often unsatisfactory due to several causes, one of which is the insufficient availability of carbon source. One possible approach to improve the nitrogen removal therefore is addition of external carbon source, while the amount of which is directly related to operation cost of a WWTP. It is obviously necessary to determine the accurate amount of addition of external carbon source according to the demand depending on the influent wastewater quality. This study focused on the real-time control of external carbon source addition based on the on-line monitoring of influent wastewater quality. The relationship between the influent wastewater quality (specifically the concentration of COD and ammonia) and the demand of carbon source was investigated through experiments on a pilot-scale A/O reactor (1m3) at the Nanjing WWTP, China. The minimum doses of carbon source addition at different situations of influent wastewater quality were determined to ensure the effluent wastewater quality meets the discharge standard. The obtained relationship is expected to be applied in the full-scale WWTPs. .

O orçamento público como ferramenta de planejamento e sua contribuição para uma gestão por resultados: reflexões a partir da experiência do município de Osasco

Os desafios para que o Plano Plurianual se torne um efetivo instrumento de planejamento estratégico ainda estão postos. É preciso desfazer as amarras que o levam a ser um mero instrumento de formalização de um plano anteriormente traçado. O exemplo de Osasco ilustra que estamos em franco processo de avanço no que diz respeito às ações governamentais e ao aprimoramento da concepção de uma gestão orientada para resultados. Entretanto a disseminação completa da cultura do planejamento e a adoção de instrumentos democráticos e de participação social é ainda incipiente. A despeito de tantos percalços há um caminho que já começou a ser trilhado.

Remoção de matéria orgânica, de nutrientes e de coliformes no processo anaeróbio em dois estágios (reator compartimentado seguido de reator UASB) para o tratamento de águas residuárias de suinocultura

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Incorporação de lodo de esgoto na massa cerâmica para fabricação de tijolos maciços: uma alternativa para a disposição final de resíduo

The disposal of sewage sludge is a growing problem face up to management of sanitary sevices. Otherwise, because its making process characteristic, the Ceramic Industry can tolerate the presence of this wastes as raw material. This study has as object to confirm the use of the sewage sluge in the Ceramic Industry like a sustentable alternative for its disposal. Futhermore, this study quests to evaluate the maximum proportion for incorporation of sludge wich result in technically and enviromentally suitable bricks. For found this proportion, the research consisted of (1) making of bricks in full scale, adde up 0%, 5%,10%, 15%, 20%, 25%,30%, 35% e 40% sludge, with size 220x105x45 mm, hand-molded by rammer and baked by industrial kiln; and (2) tecnical and enviromental evaluation of this bricks, according to Brazilian norms. The raw material uses were two distinct clays come from Goianinha/RN and sewage comes from a septic system tank and pumped into tank vehicle, of Natal/RN. The technical evaluation allowed to conclude the addiotion of the sludge brings about signifcant lost of mass and the water absorption grew up according to increase of sludge: every sludge-amended clay bricks absorved more water than control group. Thus, the compressive strength was signicantly decreased because the increase of sludge: bricks with 5% sludge added lost 45% of strength achieved at control group; the bricks made with 10 and 20% lost almost 70% of bigger strength. With up to 25% sludge added to the bricks, the streght decreased over 90%. Concerning heavy metal leaching, the two maximum proportion wich have tecnical approval, it means bricks sludge added with 15 and 20%, can say there is no risk of enviromental contamination using those bricks. This way, in this work context, it can to conclude the maximum proportion atends the technical and enviromental criterion is 20%

Decaimento bacteriano em lagoas de estabilização no Nordeste brasileiro

Stabilization pond system consisting in more sewage treatment used in Rio Grande do Norte (RN), Brazil, representing about 90% of all systems. Fecal bacteria are removed mainly facultative ponds and in maturation ponds. Many factors influence bacterial decay, such as the levels of pH and DO, temperature, light intensity, HDT and nutrient availability. The bacterial decay rate (Kb) is calculated considering many variables, but the hydraulic regime is a significant influence for microorganisms removal, and the dispersed flow which best characterizes a stabilization pond. However, some authors developed equations for the Kb accordant plug flow and complete mixing. This research study aimed to evaluate the bacterial decay of fecal coliform and Enterococcus sp. in stabilization ponds designed to treat domestic sewage, full-scale, in RN. All systems have assessed pretreatment, a facultative pond (LF) followed by two maturation (LM1 and LM2). The parameters availed were: temperature, pH, DO, BOD5, COD, fecal coliform, Enterococcus sp., Chlorophyll a, total suspended solids, fixed and volatile. In general, there were not significant differences for pH, DO and temperature in the ponds, except for the new systems, since they have low flow and hydraulic loads. The removal of organic matter in the ponds was low, about 70%, and nearly all are overloaded organic and operational problems. The bacterial removals were low, with average 96% for LF for fecal coliform, and 98% for Enterococcus sp.; LM1 were in itself a removal for fecal coliform about 71%, and 81% for Enterococcus sp.; LM2 have efficiency of 69% for fecal coliform, and 68% for Enterococcus sp. The equation proposed by Von Sperling (1999), according to the dispersed flow regime, generated empirical values of Kb more approximate to calculated values of Kb. On average, the calculated Kb to coliforms in the LF was 0.31 d-1, and for both maturation ponds were 0.35 d-1. For Enterococcus sp. the average was 0.40 d-1 for LF, 0.55 d-1 for LM1, and 0.58 d-1 for LM2. These results also showed that the Kb obtained in full-scale systems are smaller than those found in pilot-scale ponds. Moreover, one can say that the equation proposed by Marais (1974), according to the complete-mix regime, overestimates Kb. Actual results of Kb indicated that fecal coliforms are more resistant to adverse conditions present in stabilization ponds than Enterococcus sp., therefore, an indicator of microbiological safety and efficiency. The factors significant interventions in the rate of bacterial decay were concentrations of COD, the organic loading and HDT. The few Kb relationship between pH, DO and temperature were not significant. Finally, we conclude that it s essential to correct operation and maintenance, for not performing these activities is one of the main factors contributing to low rates of bacterial decay.

Eficiência de uma ETE em escala real composta por reator UASB seguido de lodo ativado

In the state of Rio Grande do Norte (RN), Brazil, there are about 80 sewage treatment systems being the predominant technology waste stabilization ponds. The Baldo s WWTP , due to its location and low availability of area, was designed as a hybrid conventional system (UASB reactor followed by activated sludge with biodiscs) at a tertiary level, being the most advanced WWTP in the State and also with the larger treatment capacity (1620 m3/h) .The paper presents the results of its performance based on samples collections from May to December 2012. Composite samples of the effluent of the grit chamber, UASB reactors, anoxic chambers, aeration tanks and treated effluent were collected weekly, every 4 hours for 24 hours. The results showed that the WWTP effluent presented adequate ranges of temperatures, pH and DO, however removal efficiencies of BOD and TSS were below the predicted by design. The UASB reactors also showed removals of BOD and TSS less than expected, due to the accumulation of sludge in the reactors, which eventually, was washed out in the effluent. The nitrification process was not satisfactory mainly due to problems in the oxygen distribution in the aeration tanks. The removal of ammonia and TKN were high, probably by the assimilation process

Investigação da capacidade intelectiva de pacientes pediátricos diagnosticados com tumores de fossa posterior

Central Nervous System are the most common pediatric solid tumors. 60% of these tumors arise in posterior fossa, mainly in cerebellum. The first therapeutic approach is surgical resection. Malignant tumors require additional strategies - chemotherapy and radiotherapy. The increasing survival evidences that childhood brain tumors result in academic and social difficulties that compromise the quality of life of the patients. This study investigated the intellectual functioning of children between 7 to 15 years diagnosed with posterior fossa tumors and treated at CEHOPE - Recife / PE. 21 children were eligible - including 13 children with pilocytic astrocytoma (G1) who underwent only surgery resection, and eight children with medulloblastoma (G2) - submitted to surgical resection, chemotherapy and craniospinal radiotherapy. Participants were evaluated by the Wechsler Intelligence Scale for Children - WISC-III. Children of G1 scored better than children of G2. Inferential tools (Mann-Whitney Ü Test) identified significant diferences (p ≤ 0.05) between the Performance IQ (PIQ) and Processing Speed Index (PSI) as a function of treatment modality; Full Scale IQ (FSIQ), PIQ and PSI as a function of parental educational level; PIQ, FSIQ, IVP and Freedom from Distractibility (FDI) as a function of time between diagnosis and evaluation. These results showed the late and progressive impact of radiotherapy on white matter and information processing speed. Furthermore, children whose parents have higher educational level showed better intellectual performance, indicating the influence of xxii socio-cultural variables on cognitive development. The impact of cancer and its treatment on cognitive development and learning should not be underestimated. These results support the need to increase the understanding of such effects in order to propose therapeutic strategies which ensure that, in addition to the cure, the full development of children with this pathology

Avaliação da relação entre qualidade de sono e uma intervenção com jogos para o desempenho de crianças e adolescentes

The sleep is an active brain process that allows the efficient realization of daily tasks. The changes on sleep patterns may influence the different cognitive processes performance. Many recent studies show the possibility of cognitive performance improvement, through the cognitive training with the use of computer games. The question is if these interventions may be influenced by the sleep quality. Thus, we evaluated the sleep quality effect about the efficacy of an intervention with computers games based on the working memory and attention for a cognitive performance training of elementary school students. The sample was constituted by 42 students with average age of 10,43 years old (SD=1,23), with 22 male participants and 20 female participants. We used to evaluate the sleep with the parents a sleep questionnaire, a sleep diary and the Sleep Behavior Questionnaire. In regard to intervention, the subjectives were distributed in an experimental and in a control group, both with 21 participants. In the first group occurred the intervention that consisted in the working memory and attention training with two cognitive tasks (Safari e Brain Workshop) during 30 daily minutes, for a 6 weeks period. In an equal period, the students from the control group should reproduce an artwork using drawing software. To evaluate the cognitive performance we applied before and after the intervention period the Wechsler Intelligence Scale for Children (WISC-III). The results showed that in both the groups the performance of the intelligence, working memory, attention and visuospatial skills was below of the mean. The cognitive processes evaluated after of intervention in the experimental group had a performance significantly higher in the Perceptual Reasoning Index (t = -6,24; p < 0,01) and in the Full Scale IQ (t = -5,09; p < 0,01) and Performance IQ (t = -6,52; p < 0,01), suggesting a improvement on the visuospatial skills, attention, working memory and processing speed. On the control group, the performance was significantly higher in the Coding subtest (t = -5,38; p< 0,01) and in the Perceptual Reasoning Index (t = -3,66; p = 0,01), suggesting a improvement on the visuospatial skills and attention. The mean obtained with the Sleep Behavior Questionnaire was 53,76 (SD=14,96) for an experimental group and 61,19 (SD=12,82) for a control group, indicating tendency for a bad sleep quality in that last one. Not only during the first days, but also in the last fifteen days of the intervention we verified in the two groups an adequate time to sleep, duration and regularity, in the weekdays and on the weekends. We didn t find significant differences between the two groups in none of the sleep variables. We verified statistically meaningful improvement on the performance of the experimental group with the intervention in the two games. We didn t verify significant correlations between the games performance index and in the sleep variables of the experimental group individuals. We verified significant correlations among the performance on the Brain Workshop and the Cubes subtest, the Perceptual Reasoning Index and the Scale Performance IQ, suggesting that the significant improvement of the visuospatial skills and of the attention was correlated with the performance in the Brain Workshop. Although the absence of correlations with the performance in the Safari, possibly it also has relieved in the improvement of the cognitive performance. The findings support the hypothesis that the computer games might be a satisfactory tool for the improvement of the performance in visuospatial skills and attention. This can be resulted of the insertion of visuospatial stimulations in the task, for example, graphical elements with thematic for children that increase the interest. The IQ below mean the individuals might have influenced the improvement absence on the cognitive processes like the working memory with games. Moreover, it wasn t verified a relation between the sleep quality and the intervention efficacy. It might have been influenced by the n of the sample. Future studies must focalize in the improvement of the effect of the interventions with games

Desempenho de reatores anaeróbios de fluxo ascendente com manta de lodo em dois estágios tratando águas residuárias de suinocultura

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desempenho de processo anaeróbio em dois estágios (reator compartimentado seguido de reator UASB) para tratamento de águas residuárias de suinocultura

Avaliou-se o efeito das águas residuárias de suinocultura com concentrações de sólidos suspensos totais em torno de 6.000 mg L-1 (DQOtotal variando de 7.557 a 11.640 mg L-1) no desempenho de processo anaeróbio em dois estágios compostos por reator compartimentado (ABR) e reator de fluxo ascendente com manta de lodo (UASB), instalados em série, em escala-piloto (volumes de 530 e 120 L, respectivamente), submetidos a tempos de detenção hidráulica (TDH) de 56 a 18 h no primeiro reator e de 13 a 4 h no segundo reator. As eficiências médias de remoção de DQOtotal variaram de 71,1 a 87,5% no reator ABR e de 41,5 a 50,1% no reator UASB, resultando em valores médios de 86,8 a 94,9% para o sistema de tratamento anaeróbio em dois estágios com carga orgânica volumétrica (COV), na faixa de 5,05 a 10,12 kg DQOtotal (m³ d)-1, no reator ABR, e de 2,83 a 9,63 kg DQOtotal (m³ d)-1, no reator UASB. As eficiências de remoção de SST e SSV foram da ordem de 95,6%. O teor de metano no biogás manteve-se acima de 70% para os dois reatores. A produção volumétrica de metano máxima de 0,755 m³ CH4 (m³ d)-1 ocorreu no reator 1, com COV de 10,12 kg DQOtotal (m³ d)-1 e TDH de 18 h. Os valores médios de pH variaram na faixa de 7,2 a 8,0 para os efluentes dos reatores 1 e 2. Os ácidos voláteis totais mantiveram-se estáveis com concentrações abaixo de 200 mg L-1. Com variações abruptas e acentuadas de concentrações de SST e DQOtotal do afluente, os reatores mantiveram as eficiências de remoção de DQO e sólidos suspensos, em torno de 70%, e a qualidade do biogás, com 80% de CH4.

Reatores anaeróbios operados em batelada sequencial, seguidos de lagoas de polimento, para o tratamento de águas residuárias de suinocultura. Parte I: produção de metano e remoção de DQO e de sólidos suspensos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)