Assessing and comparing the total antioxidant capacity of commercial beverages: application to beers, wines, waters and soft drinks using TRAP, TEAC and FRAP methods.

This work measures and tries to compare the Antioxidant Capacity (AC) of 50 commercial beverages of different kinds: 6 wines, 12 beers, 18 soft drinks and 14 flavoured waters. Because there is no reference procedure established for this purpose, three different optical methods were used to analyse these samples: Total Radical trapping Antioxidant Parameter (TRAP), Trolox Equivalent Antioxidant Capacity (TEAC) and Ferric ion Reducing Antioxidant Parameter (FRAP). These methods differ on the chemical background and nature of redox system. The TRAP method involves the transfer of hydrogen atoms while TEAC and FRAP involves electron transfer reactions. The AC was also assessed against three antioxidants of reference, Ascorbic acid (AA), Gallic acid (GA) and 6-hydroxy-2,5,7,8-tetramethyl- 2-carboxylic acid (Trolox). The results obtained were analyzed statistically. Anova one-way tests were applied to all results and suggested that methods and standards exhibited significant statistical differences. The possible effect of sample features in the AC, such as gas, flavours, food colouring, sweeteners, acidity regulators, preservatives, stabilizers, vitamins, juice percentage, alcohol percentage, antioxidants and the colour was also investigated. The AC levels seemed to change with brand, kind of antioxidants added, and kind of flavour, depending on the sample. In general, higher ACs were obtained for FRAP as method, and beer for kind of sample, and the standard expressing the smaller AC values was GA.

On the analysis of data emerging in non-linear and complex systemscomparison of two X-Ray prony spectra

New arguments proving that successive (repeated) measurements have a memory and actually remember each other are presented. The recognition of this peculiarity can change essentially the existing paradigm associated with conventional observation in behavior of different complex systems and lead towards the application of an intermediate model (IM). This IM can provide a very accurate fit of the measured data in terms of the Prony's decomposition. This decomposition, in turn, contains a small set of the fitting parameters relatively to the number of initial data points and allows comparing the measured data in cases where the “best fit” model based on some specific physical principles is absent. As an example, we consider two X-ray diffractometers (defined in paper as A- (“cheap”) and B- (“expensive”) that are used after their proper calibration for the measuring of the same substance (corundum a-Al2O3). The amplitude-frequency response (AFR) obtained in the frame of the Prony's decomposition can be used for comparison of the spectra recorded from (A) and (B) - X-ray diffractometers (XRDs) for calibration and other practical purposes. We prove also that the Fourier decomposition can be adapted to “ideal” experiment without memory while the Prony's decomposition corresponds to real measurement and can be fitted in the frame of the IM in this case. New statistical parameters describing the properties of experimental equipment (irrespective to their internal “filling”) are found. The suggested approach is rather general and can be used for calibration and comparison of different complex dynamical systems in practical purposes.

Numerical Evaluation of Ventilation Performance in Children Day Care Centres

Modelling of ventilation is strongly dependent on the physical characteristics of the building of which precise evaluation is a complex and time consuming task. In the frame of a research project, two children day care centres (CDCC) have been selected in order to measure the envelope air permeability, the flow rate of mechanical ventilation systems and indoor and outdoor temperature. The data obtained was used as input to the computer code CONTAM for ventilation simulations. The results obtained were compared with direct measurements of ventilation flow from short term measurements with CO2 tracer gas and medium term measurements with perfluorocarbon tracer (PFT) gas decay method. After validation, in order to analyse the main parameters that affect ventilation, the model was used to predict the ventilation rates for a wide range of conditions. The purpose of this assessment was to find the best practices to improve natural ventilation. A simple analytical method to predict the ventilation flow rate of rooms is also presented. The method is based on the estimation of wind effect on the room through the evaluation of an average factor and on the assessment of relevant cross section of gaps and openings combined in series or in parallel. It is shown that it may be applied with acceptable accuracy for this type of buildings when ventilation is due essentially to wind action.

A constructive technology assessment of stationary energy storage systems: prospective life cycle orientated analysis

Based on the presentation and discussion at the 3rd Winter School on Technology Assessment, December 2012, Universidade Nova de Lisboa (Portugal), Caparica Campus, PhD programme on Technology Assessment

Acredita Portugal: How to improve the implementation rate of entrepreneurial projects?

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Heritages, Identities, and Policy in the Metropolitan Area of Lisbon

In a world that has moved away from narratives based on the idea of progress, the past has established itself as a place of reference: confirming to ourselves that what we were is indispensible for sustaining what we think we are. The recovery of the past is thus one of the most common symbolic instruments used in negotiating identities. The cultural practices that have recourse to representation mechanisms that call on the past in order to consider the present always end up translating themselves, insofar as they fragment, reorganize and interpret it in their transformation, or, to use a formula that has become unavoidable, in their “invention”. Patrimonialization is one such practice. It associates the notion of heritage – which is not a given fact, but rather a socially constructed classification, and therefore one that is constantly being negotiated – with specific objects that come to serve as cultural representations of the groups who consider themselves to be their rightful owners. In the Lisbon Metropolitan Area, as in other ethnographic contexts, patrimonialization encompasses things as diverse as landscapes, monuments, popular architecture, handicrafts, local feast days/processions/pilgrimages and people; all things that can, once transformed into material representations of the past, serve as arguments for the identity fictions of the people who inhabit them.

Res Publica: Citizenship and Political Representation in Portugal, 1820-1926

The term res publica (literally “thing of the people”) was coined by the Romans to translate the Greek word politeia, which, as we know, referred to a political community organised in accordance with certain principles, amongst which the notion of the “good life” (as against exclusively private interests) was paramount. This ideal also came to be known as political virtue. To achieve it, it was necessary to combine the best of each “constitutional” type and avoid their worst aspects (tyranny, oligarchy and ochlocracy). Hence, the term acquired from the Greeks a sense of being a “mixed” and “balanced” system. Anyone that was entitled to citizenship could participate in the governance of the “public thing”. This implied the institutionalization of open debate and confrontation between interested parties as a way of achieving the consensus necessary to ensure that man the political animal, who fought with words and reason, prevailed over his “natural” counterpart. These premises lie at the heart of the project which is now being presented under the title of Res Publica: Citizenship and Political Representation in Portugal, 1820-1926. The fact that it is integrated into the centenary commemorations of the establishment of the Republic in Portugal is significant, as it was the idea of revolution – with its promise of rupture and change – that inspired it. However, it has also sought to explore events that could be considered the precursor of democratization in the history of Portugal, namely the vintista, setembrista and patuleia revolutions. It is true that the republican regime was opposed to the monarchic. However, although the thesis that monarchy would inevitably lead to tyranny had held sway for centuries, it had also been long believed that the monarchic system could be as “politically virtuous” as a republic (in the strict sense of the word) provided that power was not concentrated in the hands of a single individual. Moreover, various historical experiments had shown that republics could also degenerate into Caesarism and different kinds of despotism. Thus, when absolutism began to be overturned in continental Europe in the name of the natural rights of man and the new social pact theories, initiating the difficult process of (written) constitutionalization, the monarchic principle began to be qualified as a “monarchy hedged by republican institutions”, a situation in which not even the king was exempt from isonomy. This context justifies the time frame chosen here, as it captures the various changes and continuities that run through it. Having rejected the imperative mandate and the reinstatement of the model of corporative representation (which did not mean that, in new contexts, this might not be revived, or that the second chamber established by the Constitutional Charter of 1826 might not be given another lease of life), a new power base was convened: national sovereignty, a precept that would be shared by the monarchic constitutions of 1822 and 1838, and by the republican one of 1911. This followed the French example (manifested in the monarchic constitution of 1791 and in the Spanish constitution of 1812), as not even republicans entertained a tradition of republicanism based upon popular sovereignty. This enables us to better understand the rejection of direct democracy and universal suffrage, and also the long incapacitation (concerning voting and standing for office) of the vast body of “passive” citizens, justified by “enlightened”, property- and gender-based criteria. Although the republicans had promised in the propaganda phase to alter this situation, they ultimately failed to do so. Indeed, throughout the whole period under analysis, the realisation of the potential of national sovereignty was mediated above all by the individual citizen through his choice of representatives. However, this representation was indirect and took place at national level, in the hope that action would be motivated not by particular local interests but by the common good, as dictated by reason. This was considered the only way for the law to be virtuous, a requirement that was also manifested in the separation and balance of powers. As sovereignty was postulated as single and indivisible, so would be the nation that gave it soul and the State that embodied it. Although these characteristics were common to foreign paradigms of reference, in Portugal, the constitutionalization process also sought to nationalise the idea of Empire. Indeed, this had been the overriding purpose of the 1822 Constitution, and it persisted, even after the loss of Brazil, until decolonization. Then, the dream of a single nation stretching from the Minho to Timor finally came to an end.

The effect of ownership concentration on management behavior in Belgian banks: A case study

Double Degree. A Work Project, presented as part of the requirements for the Award of a Master’s Degree in Finance from NOVA – School of Business and Economics and a Masters Degree in Management from Louvain School of Management

The mixed impact of design thinking on business collaborations

The present work project investigates the implications of design thinking on an interbusiness collaborative project, unveiling both the benefits and fragilities that derive from the use of such methodology within the mentioned context. The study is organized in two parts. The first one starts with a literature review on the two relevant frames of reference – design thinking and business collaboration. It proceeds to the creation of a conceptual framework to assess the potential value of the design-based approach. The second part focuses on the practical application of to the newly developed instrument to the inTRAIN project – R&D for railway interiors.

Assessment of national parks affected by naturbanization processes in Southern Europe

This paper assesses land-use changes related to naturbanization processes on three biosphere reserves in Southern Europe. A comparative analysis has been done on the National Parks in Peneda-Ger^es in North Portugal, C_evennes in South France and Sierra Nevada in South Spain, using Corine Land Cover data from 1990 until 2006. Results indicate that the process of land-use intensification is taking place in the frame of naturbanization dynamics that could jeopardize the role of Protected Areas. Focusing on the trends faced by National Parks and their surrounding territories, the analysis demonstrates, both in quantitative and spatial terms, the intensification processes of land-use changes and how it is important to know them for coping with increasing threats. The article concludes that in the current context of increasing stresses, a broader focus on nature protection, encompassing the wider countryside, is needed if the initiatives for biodiversity protection are to be effective.

Out-of-plane behavior of masonry infill walls

In order to investigate the out-of-plane behaviour of masonry infill walls, quasi-static testing was performed on a masonry infill walls built inside a reinforced concrete frame by means of an airbag system to apply the uniform out-of-plane load to each component of the infill. The main advantage of this testing setup is that the out-of-plane loading can be applied more uniformly in the walls, contrarily to point load configuration. The test was performed under displacement control by selecting the mid-point of the infill as control point. Input and output air in the airbag was controlled by using a software to apply a specific displacement in the control point of the infill wall. The effect of the distance between the reaction frame of the airbag and the masonry infill on the effective contact area was previously analysed. Four load cells were attached to the reaction frame to measure the out-of-plane force. The effective contact area of the airbag was calculated by dividing the load measured in load cells by the pressure inside the airbag. When the distance between the reaction walls and the masonry infill wall is smaller, the effective area is closer to the nominal area of the airbag. Deformation and crack patterns of the infill confirm the formation of arching mechanism and two-way bending of the masonry infill. Until collapse of the horizontal interface between infill and upper beam in RC frame, the infill bends in two directions but the failure of that interface which is known as weakest interface due to difficulties in filling the mortar between bricks of last row and upper beam results in the crack opening trough a well-defined path and the consequent collapse of the infill.

A spectrum-driven damage Identification technique : application and validation through the numerical simulation of the Z24 Bridge

The present paper focuses on a damage identification method based on the use of the second order spectral properties of the nodal response processes. The explicit dependence on the frequency content of the outputs power spectral densities makes them suitable for damage detection and localization. The well-known case study of the Z24 Bridge in Switzerland is chosen to apply and further investigate this technique with the aim of validating its reliability. Numerical simulations of the dynamic response of the structure subjected to different types of excitation are carried out to assess the variability of the spectrum-driven method with respect to both type and position of the excitation sources. The simulated data obtained from random vibrations, impulse, ramp and shaking forces, allowed to build the power spectrum matrix from which the main eigenparameters of reference and damage scenarios are extracted. Afterwards, complex eigenvectors and real eigenvalues are properly weighed and combined and a damage index based on the difference between spectral modes is computed to pinpoint the damage. Finally, a group of vibration-based damage identification methods are selected from the literature to compare the results obtained and to evaluate the performance of the spectral index.

Experimental and numerical studies of hybrid PCM embedded in plastering mortar for enhanced thermal behaviour of buildings

This paper proposes a methodology for improvement of energy efficiency in buildings through the innovative simultaneous incorporation of three distinct phase change materials (here termed as hybrid PCM) in plastering mortars for façade walls. The thermal performance of a hybrid PCM mortar was experimentally evaluated by comparing the behaviour of a prototype test cell (including hybrid PCM plastering mortar) subjected to realistic daily temperature profiles, with the behaviour of a similar prototype test cell, in which no PCM was added. A numerical simulation model was employed (using ANSYS-FLUENT) to validate the capacity of simulating temperature evolution within the prototype containing hybrid PCM, as well as to understand the contribution of hybrid PCM to energy efficiency. Incorporation of hybrid PCM into plastering mortars was found to have the potential to significantly reduce heating/cooling temperature demands for maintaining the interior temperature within comfort levels when compared to normal mortars (without PCM), or even mortars comprising a single type of PCM.

The use of forensic polycyclic aromatic hydrocarbon signatures and Compound Ratio Analysis Techniques (CORAT) for the source characterisation of petrogenic/pyrogenic environmental releases.

This study utilised recent developments in forensic aromatic hydrocarbon fingerprint analysis to characterise and identify specific biogenic, pyrogenic and petrogenic contamination. The fingerprinting and data interpretation techniques discussed include the recognition of: The distribution patterns of hydrocarbons (alkylated naphthalene, phenanthrene, dibenzothiophene, fluorene, chrysene and phenol isomers), • Analysis of “source-specific marker” compounds (individual saturated hydrocarbons, including n-alkanes (n-C5 through 0-C40) • Selected benzene, toluene, ethylbenzene and xylene isomers (BTEX), • The recalcitrant isoprenoids; pristane and phytane and • The determination of diagnostic ratios of specific petroleum / non-petroleum constituents, and the application of various statistical and numerical analysis tools. An unknown sample from the Irish Environmental Protection Agency (EPA) for origin characterisation was subjected to analysis by gas chromatography utilising both flame ionisation and mass spectral detection techniques in comparison to known reference materials. The percentage of the individual Polycyclic Aromatic Hydrocarbons (PAIIs) and biomarker concentrations in the unknown sample were normalised to the sum of the analytes and the results were compared with the corresponding results with a range of reference materials. In addition, to the determination of conventional diagnostic PAH and biomarker ratios, a number of “source-specific markers” isomeric PAHs within the same alkylation levels were determined, and their relative abundance ratios were computed in order to definitively identify and differentiate the various sources. Statistical logarithmic star plots were generated from both sets of data to give a pictorial representation of the comparison between the unknown sample and reference products. The study successfully characterised the unknown sample as being contaminated with a “coal tar” and clearly demonstrates the future role of compound ratio analysis (CORAT) in the identification of possible source contaminants.

The Phenomenon of international new ventures, global start-ups, and born-globals: what do we know after a decade (1993-2002) of exhaustive scientific inquiry?

In this paper, 27 studies from the last decade which deal more or less explicitly with the International New Venture, global start-up or born-global phenomenon are first identified, and then fully examined and critically assessed as a basis for obtaining an adequate view of the state-of-the-art of this increasingly important research avenue in the field of International Entrepreneurship (IE). The methodology used for this synthetic review allow us to analyze a number of recent, purposefully-chosen studies that are systematically compared along the following criteria: 1) main objective and type of research; 2) theoretical framework/s of reference, 3) methodological issues, and 4) main findings and/or conclusions. As a result of this literature review, a critical assessment follows in which the most relevant benefits and contributions as well as potential drawbacks, limitations or major discrepancies in the research activities conducted so far are discussed. Finally, some suggestions and implications are provided in the form of future research directions.