Analysis of the 3D zone of flow establishment from a ship’s propeller

In the present study an experimental investigation of the time-averaged velocity and turbulence intensity distributions from a ship’s propeller, in “bollard pull” condition (zero speed of advance), is reported. Previous studies have focused mainly on the velocity profile of not a rotating ship propeller but a plain jet. The velocity profile of a propeller is investigated experimentally in this study.
The velocity measurements were performed in laboratory by using a Laser Doppler Anemometry (LDA). The measurements demonstrated two-peaked ridges velocity profile with a low velocity core at the centre within the near wake. The two-peaked ridges combined to be one-peaked ridge at 3.68 diameters downstream indicating the end of the zone of flow establishment. The study
provides useful information from a rotating ship’s propeller rather than a simplified plain jet to researchers investigating flow velocity generated from a propeller and probably resulting local scouring.

Trophic dynamics within a hybrid zone - interactions between an abundant cyprinid hybrid and sympatric parental species

1. Recent proliferation of hybridisation in response to anthropogenic ecosystem change, coupled with increasing evidence of the importance of ancient hybridisation events in the formation of many species, has moved hybridisation to the forefront of evolutionary theory.

2. In spite of this, the mechanisms (e. g. differences in trophic ecology) by which hybrids co-exist with parental taxa are poorly understood. A unique hybrid zone exists in Irish freshwater systems, whereby hybrid offspring off two non-native cyprinid fishes often outnumber both parental species.

3. Using stable isotope and gut content analyses, we determined the trophic interactions between sympatric populations of roach (Rutilus rutilus), bream (Abramis brama) and their hybrid in lacustrine habitats.

4. The diet of all three groups displayed little variation across the study systems, and dietary overlap was observed between both parental species and hybrids. Hybrids displayed diet, niche breadth and trophic position that were intermediate between the two parental species while also exhibiting greater flexibility in diet across systems.

Influence of Different European Cements (CEM) on the Hydration of Cover-Zone Concrete during the Curing and Post Curing Periods

The durability of reinforced concrete structures depends, in the main, on the performance of the cover-zone concrete as it is this which protects the steel from the external environment. This paper focusses on the use of discretised electrical property measurements to study depth-related features during both the curing and post-curing period thereby allowing an integrated assessment of the protective properties of the cover region. In the current work, use is made of a small, multi-electrode array embedded within the surface 75mm of concrete specimens. Concretes were manufactured with different European cements (CEM) and water/binder ratios representing mixes which satisfied the minimum requirements for a range of environmental exposure classes including exposure to chlorides. Electrical resistance measurements were taken over a period in excess of 300 days which showed on-going hydration, pozzolanic reaction and pore-structure refinement; in addition, in the post-curing period, when exposed to a cyclic chloride ponding regime, measurements could be used to study the convective zone and ionic enrichment of the surface layer.

Delineation of a quick clay zone at Smørgrav, Norway, with electromagnetic methods under geotechnical constraints

In many coastal areas of North America and Scandinavia, post-glacial clay sediments have emerged above sea level due to iso-static uplift. These clays are often destabilised by fresh water leaching and transformed to so-called quick clays as at the investigated area at Smørgrav, Norway. Slight mechanical disturbances of these materials may trigger landslides. Since the leaching increases the electrical resistivity of quick clay as compared to normal marine clay, the application of electromagnetic (EM) methods is of particular interest in the study of quick clay structures.

For the first time, single and joint inversions of direct-current resistivity (DCR), radiomagnetotelluric (RMT) and controlled-source audiomagnetotelluric (CSAMT) data were applied to delineate a zone of quick clay. The resulting 2-D models of electrical resistivity correlate excellently with previously published data from a ground conductivity metre and resistivity logs from two resistivity cone penetration tests (RCPT) into marine clay and quick clay. The RCPT log into the central part of the quick clay identifies the electrical resistivity of the quick clay structure to lie between 10 and 80 O m. In combination with the 2-D inversion models, it becomes possible to delineate the vertical and horizontal extent of the quick clay zone. As compared to the inversions of single data sets, the joint inversion model exhibits sharper resistivity contrasts and its resistivity values are more characteristic of the expected geology. In our preferred joint inversion model, there is a clear demarcation between dry soil, marine clay, quick clay and bedrock, which consists of alum shale and limestone.

Xenopus cytoplasmic linker-associated protein 1 (XCLASP1) promotes axon elongation and advance of pioneer microtubules

Dynamic microtubules (MTs) are required for neuronal guidance, in which axons extend directionally toward their target tissues. We found that depletion of the MT-binding protein Xenopus cytoplasmic linker-associated protein 1 (XCLASP1) or treatment with the MT drug Taxol reduced axon outgrowth in spinal cord neurons. To quantify the dynamic distribution of MTs in axons, we developed an automated algorithm to detect and track MT plus ends that have been fluorescently labeled by end-binding protein 3 (EB3). XCLASP1 depletion reduced MT advance rates in neuronal growth cones, very much like treatment with Taxol, demonstrating a potential link between MT dynamics in the growth cone and axon extension. Automatic tracking of EB3 comets in different compartments revealed that MTs increasingly slowed as they passed from the axon shaft into the growth cone and filopodia. We used speckle microscopy to demonstrate that MTs experience retrograde flow at the leading edge. Microtubule advance in growth cone and filopodia was strongly reduced in XCLASP1-depleted axons as compared with control axons, but actin retrograde flow remained unchanged. Instead, we found that XCLASP1-depleted growth cones lacked lamellipodial actin organization characteristic of protrusion. Lamellipodial architecture depended on XCLASP1 and its capacity to associate with MTs, highlighting the importance of XCLASP1 in actin-microtubule interactions.

Susceptibility to environmentally induced cracking of laser-welded NiTi wires in Hanks’ solution at open-circuit potential

In the present study the tensile and super-elastic behaviours of laser-welded NiTi wires in Hanks’ solution at open-circuit potential (OCP) were investigated using tensile and cyclic slow-strain-rate tests (SSRT). In comparison with NiTi weldment tested in oil (non-corrosive environment), the weldment in Hanks’ solution suffered from obvious degradation in the tensile properties as evidenced by lower tensile strength, reduced maximum elongation, and a brittle fracture mode. Moreover, a larger residual strain was observed in the weldment after stress–strain cycles in Hanks’ solution. In addition to the microstructural defects resulting from the welding process, the inferior tensile and super-elastic behaviours of the NiTi weldment in Hanks’ solution could be attributed to the trapping of a large amount of hydrogen in the weld zone and heat-affected zone.

On Irish stickleback:Morphological diversification in a secondary contact zone

Question: How parallel is adaptive evolution when it occurs from different genetic backgrounds? Background: Divergent evolutionary lineages of several post-glacial fish species including the threespine stickleback are found together in Ireland. Goals: To investigate the morphological diversity of stickleback populations in Ireland and assess whether morphology evolved in parallel between evolutionary lineages. Methods: We sampled stickleback from lake, river, and coastal habitats across Ireland. Microsatellite and mitochondrial DNA data revealed evolutionary history. Geometric morphometrics and linear trait measurements characterized morphology. We used a multivariate approach to quantify parallel and non-parallel divergence within and between lineages. Results: Repeated evolution of similar morphologies in similar habitats occurred across Ireland, concordant with patterns observed elsewhere in the stickleback distribution. A strong pattern of habitat-specific morphology existed even among divergent lineages. Furthermore, a strong signal of shared morphological divergence occurred along a marine-freshwater axis. Evidently, deterministic natural selection played a more important role in driving freshwater adaptation than independent evolutionary history. © 2013 Mark Ravinet.

An assay for angiotensin-converting enzyme using capillary zone electrophoresis

A sensitive and rapid method was developed for angiotensin-converting enzyme (ACE) activity determination by capillary zone electrophoresis. Hippuryl-View the MathML source-histidyl-View the MathML source-leucine, a synthetic tripeptide, was used as the ACE-specific substrate. Capillary zone electrophoresis was employed to separate the products of the enzymatic reaction and the ACE activity was determined by quantification of hippuric acid, a result of the enzymatic reaction on the tripeptide. The capillary electrophoresis was performed in a 27 cm × 75 μm i.d. fused-silica capillary using 200 mM boric acid–borate buffer (pH 9.0) as a run buffer with an applied voltage of 8.1 kV at a capillary temperature of 23°C. The electrophoresis was monitored at 228 nm. Each electrophoretic run requires only a nanoliter of the enzymatic reactant solution, at only 6 min, rendering a powerful tool for the ACE assay.

The influence of water motion on the growth rate of the kelp Laminaria hyperborea

The kelp Laminaria hyperborea is a dominant component of the subtidal nearshore ecosystem and is subjected to a heterogeneous wave and current climate. Water motion is known to influence physiological processes in macroalgae such as photosynthesis and nutrient uptake attributed to mass-transfer limitation. The study attempts to establish the effect of water motion on the growth rates of blades and elongation rates of the stipes of L. hyperborea at adjacent wave-exposed and wave-sheltered locations over a 12month period from field observations. The observations were supported by detailed physical and chemical measurements (light, temperature, seawater nutrient concentrations and hydrodynamics) and of tissue carbon and nitrogen concentrations together with δ¹³carbon. Despite a 30% difference in the root mean square of the velocity (Vel_rms) between the two survey locations, there was no evidence to suggest that water motion had any direct influence on the growth rates of either the blades or elongation of stipes of L. hyperborea. No significant differences were observed between either environmental or plant physiological variables between the sheltered and exposed locations. Using an integral velocity parameter (Vel_rms) the present study also highlighted the importance of the tidally induced current component of water flow in the subtidal zone. 

Desire for fertility and associated factors among people living with HIV/AIDS (PLWHA) in selected antiretroviral therapy (ART) clinics of Horro Guduru Wollega Zone, North West Oromia, Ethiopia- A cross sectional study

Background: Most recently fertility issues in HIV positive men and women are becoming increasingly important. Because of ART access and its good life effect, it is expected that the need and desire to get married, to have children and to have sexual partners for PLWHA would change with the regard to reproductive health. In Ethiopia HIV positive individuals may or may not have desire to have children. And the extent of this desire and how it varies by individual, health and demographic characteristics is not well known.

Objective: the aim of the study was to assess desire for fertility and associated factors among PLWHA in selected ART clinics of Horro Guduru Wollega Zone, Oromia National Regional State, Ethiopia.

Methods: A cross-sectional, institutional-based study that employed quantitative and qualitative in-depth interviews was conducted. Three hundred twenty one study subjects were selected using systematic random sampling technique and the data was collected using interviewer administered structured questionnaire. Data entry and analysis were performed using EPI Info version 3.5.1 and SPSS version 16. P-value <0.05 was taken as statistically significant and logistic regression was used to control potential confounding factors.

Results: Seventy three (57.9%) of the males and seventy six (39%) of the females desired to have children, giving a total of 149(46.4%) of all study participants. PLWHA who desired children were younger (AOR:3.3, 95%CI: 1.3-8.9), married (AOR: 5.8, 95%CI: 2.7-12.8), had no children (AOR: 75, 95%CI: 20.1-273.3) and males (AOR; 1.9, 95%CI: 1.02-3.62) compared with their counter parts. The major reason for those people who did not desire children were having desired number of children 80 (46.5%) followed by fear of HIV transmission to child reported by 42 (24.4%) of them.

Conclusion: A considerable number of PLWHA wants to have a child currently or in the near future. Many variables like socio demography, partner related, number of alive children and HIV related disease condition were significantly associated with fertility desire.