Review of the economics of climate change (RECC) in the Caribbean project: Phase I climate change profiles in select Caribbean countries

These reports are the result of consultations which were conducted in 2008 in Aruba, Barbados, Netherlands Antilles, Dominican Republic, Guyana, Jamaica, Montserrat, Saint Lucia and Trinidad and Tobago. The objective was to obtain relevant information that would inform a Stern-type report where the economics of climate change would be examined for the Caribbean subregion. These reports will be complimented by future assessments of the costs of the “business as usual”, adaptation and mitigation responses to the potential impacts of climate change. It is anticipated that the information contained in each country report would provide a detailed account of the environmental profile and would, therefore, provide an easy point of reference for policymakers in adapting existing policy or in formulating new ones. ECLAC continues to be available to the CDCC countries to provide technical support in the area of sustainable development.

The economics of climate change in the Caribbean

The present volume captures the results of the studies conducted during Phase 2 of the RECCC project to date. Chapter 1 provides the contextual framework within which the assessments were conducted and Chapter 2 focuses on the emissions scenarios as set out by the Special Report on Emissions Scenarios by the Intergovernmental Panel on Climate Change (IPCC). The results of the economic assessments of the impacts of climate change on the agricultural, coastal and marine, energy and transportation, health, freshwater resources and tourism sectors in the Caribbean subregion are presented in Chapters 3 to 9, respectively. The report concludes with an examination of adaptation strategies and key policy recommendations for policymakers, in Chapter 10.

The economics of climate change

This paper focuses on several key economic issues relevant to climate change. Given the fact that changes in climate are projections using the best available data, it examines the economic principles of uncertainty and the precautionary approach, and then continues to address the key drivers of climate change. Climate change is expected to result in negative impacts and, in this regard, the consequences of anticipated rising temperatures and sea levels as well as changes in precipitation that may result in flooding and/or drought are addressed. However, the situation is not all negative and, as such, the opportunities that are likely to arise through adaptation and mitigation are discussed especially with respect to the Caribbean. In this regard and recognizing that it would be useful to Caribbean policymakers to utilize these opportunities and to address the negative impacts, the Economic Commission for Latin America and the Caribbean (ECLAC), through its subregional headquarters for the Caribbean, is spearheading a review of the economics of climate change in the Caribbean with a view to providing quantitative information to stakeholders in dealing with climate change. The paper makes recommendations for the Caribbean to address climate change at the national level. These include macroplanning; promotion of energy efficiency; creation of incentives to obtain support for implementation of alternative energy technologies; maintaining the will among stakeholders on a sustained basis for addressing climate change; and the conduct of relevant research into varieties of plants and animals that could adapt to changing climatic conditions. Finally, it must be recognized that to successfully combat climate change, the threats and opportunities must be properly assessed as part of an ongoing region-wide system of risk management, which should not be incidental, but integral, to national and regional planning and forecasting for the future.

The Economics of Climate Change in Central America: Summary 2012

This report was published with the goal of discussing, disseminating and using the results of this initiative in the formulation of national and regional strategies and have been presented at national and regional events with civil servants, representatives of non-governmental organizations, trade unions, the private sector, universities and research centers. The results have served as inputs in the training of national committees on climate change and negotiating teams, as well as in the preparation of the Regional Climate Change Strategy, several international financing projects and various national policies. The results have been presented in coordination with the Ministries of Environment at the last three Conferences of the Parties of the United Nations Framework Convention on Climate Change.

Joint economic design of X̄ and R control charts for processes subject to two independent assignable causes

A model for the joint economic design of X̄ and R control charts is developed. This model assumes that the process is subject to two assignable causes. One assignable cause shifts the process mean; the other shifts the process variance. The occurrence of the assignable cause of one kind does not block the occurrence of the assignable cause of another kind. Consequently, a second process parameter can go out-of-control after the first process parameter has gone out-of-control. A numerical study of the cost surface to the model considered has revealed that it is convex, at least in the interest region.

The Economics of Managing Wildlife Disease

The spread of infectious disease among and between wild and domesticated animals has become a major problem worldwide. Upon analyzing the dynamics of wildlife growth and infection when the diseased animals cannot be identified separately from healthy wildlife prior to the kill, we find that harvest-based strategies alone have no impact on disease transmission. Other controls that directly influence disease transmission and/or mortality are required. Next, we analyze the socially optimal management of infectious wildlife. The model is applied to the problem of bovine tuberculosis among Michigan white-tailed deer, with non-selective harvests and supplemental feeding being the control variables. Using a two-state linear control model, we find a two-dimensional singular path is optimal (as opposed to a more conventional bang-bang solution) as part of a cycle that results in the disease remaining endemic in the wildlife. This result follows from non-selective harvesting and intermittent wildlife productivity gains from supplemental feeding.

RB34-71 Effects of Inflation and Deflation Upon Nebraska Agriculture, 1914 to 1932

Nebraska farmers prospered during the period which followed the depression of the nineties and preceded the beginning of the World War. To be sure the prosperity was not uniformly distributed either by years or by areas. The corn crop was unusually short in a large portion of the state in 1901 and an almost total failure in many of the southern counties in 1913. Chinch bugs did considerable injury in 1901 and the Hessian fly in 1905 and 1914. There was noticeable damage from insects in some areas in other years. No part of the state, however, suffered from long-continued drouth or repeated ravages of insect pests. The depression of 1907 affected credit and prices very severly for a few months, but recovery was rapid and within less than a year business was again moving forward. This 1934 research bulletin covers the problems of inflation and deflation; changes in the prices of various commodities during inflation and deflation; prices and purchasing power of Nebraska farm products, 1914 to 1932; adjustments during inflation and deflation; the effect of wages on Nebraska agriculture; taxes; Nebraska farm income; changes in types of farming in Nebraska, 1914 to 1932; the banking situation; Nebraska farm land prices; and the effects of inflation and deflation upon Nebraska businesses.

Nebraska Wind Power: A Comparitive Study of Knowledge and Attitudes

Abstract The goal of this project is to assess the knowledge and attitudes of Nebraskans on the issue of wind power. The point of this research is to learn whether the presence of wind power has a positive effect on a person’s knowledge about and attitudes toward wind power and wind turbines. Using mail surveys, qualitative and quantitative data were collected from the towns of Pierce and Ainsworth Nebraska. The surveys aided in seeing patterns of knowledge about wind power and wind turbines and positive and negative attitudes and major concerns regarding wind power.

Employment Effects of Product and Labour Market Reforms: Are There Synergies?

This article investigates the effect of product market liberalisation on employment allowing for interactions between policies and institutions in product and labour markets. Using panel data for OECD countries over the period 19802002, we present evidence that product market deregulation is more effective at the margin when labour market regulation is high. The data also suggest that product market liberalisation may promote employment-enhancing labour market reforms.

Catalytic liquid- and gas-phase oxidations for the synthesis of intermediates and specialty chemicals: some examples of industrial relevance

Nowadays, it is clear that the target of creating a sustainable future for the next generations requires to re-think the industrial application of chemistry. It is also evident that more sustainable chemical processes may be economically convenient, in comparison with the conventional ones, because fewer by-products means lower costs for raw materials, for separation and for disposal treatments; but also it implies an increase of productivity and, as a consequence, smaller reactors can be used. In addition, an indirect gain could derive from the better public image of the company, marketing sustainable products or processes. In this context, oxidation reactions play a major role, being the tool for the production of huge quantities of chemical intermediates and specialties. Potentially, the impact of these productions on the environment could have been much worse than it is, if a continuous efforts hadn’t been spent to improve the technologies employed. Substantial technological innovations have driven the development of new catalytic systems, the improvement of reactions and process technologies, contributing to move the chemical industry in the direction of a more sustainable and ecological approach. The roadmap for the application of these concepts includes new synthetic strategies, alternative reactants, catalysts heterogenisation and innovative reactor configurations and process design. Actually, in order to implement all these ideas into real projects, the development of more efficient reactions is one primary target. Yield, selectivity and space-time yield are the right metrics for evaluating the reaction efficiency. In the case of catalytic selective oxidation, the control of selectivity has always been the principal issue, because the formation of total oxidation products (carbon oxides) is thermodynamically more favoured than the formation of the desired, partially oxidized compound. As a matter of fact, only in few oxidation reactions a total, or close to total, conversion is achieved, and usually the selectivity is limited by the formation of by-products or co-products, that often implies unfavourable process economics; moreover, sometimes the cost of the oxidant further penalizes the process. During my PhD work, I have investigated four reactions that are emblematic of the new approaches used in the chemical industry. In the Part A of my thesis, a new process aimed at a more sustainable production of menadione (vitamin K3) is described. The “greener” approach includes the use of hydrogen peroxide in place of chromate (from a stoichiometric oxidation to a catalytic oxidation), also avoiding the production of dangerous waste. Moreover, I have studied the possibility of using an heterogeneous catalytic system, able to efficiently activate hydrogen peroxide. Indeed, the overall process would be carried out in two different steps: the first is the methylation of 1-naphthol with methanol to yield 2-methyl-1-naphthol, the second one is the oxidation of the latter compound to menadione. The catalyst for this latter step, the reaction object of my investigation, consists of Nb2O5-SiO2 prepared with the sol-gel technique. The catalytic tests were first carried out under conditions that simulate the in-situ generation of hydrogen peroxide, that means using a low concentration of the oxidant. Then, experiments were carried out using higher hydrogen peroxide concentration. The study of the reaction mechanism was fundamental to get indications about the best operative conditions, and improve the selectivity to menadione. In the Part B, I explored the direct oxidation of benzene to phenol with hydrogen peroxide. The industrial process for phenol is the oxidation of cumene with oxygen, that also co-produces acetone. This can be considered a case of how economics could drive the sustainability issue; in fact, the new process allowing to obtain directly phenol, besides avoiding the co-production of acetone (a burden for phenol, because the market requirements for the two products are quite different), might be economically convenient with respect to the conventional process, if a high selectivity to phenol were obtained. Titanium silicalite-1 (TS-1) is the catalyst chosen for this reaction. Comparing the reactivity results obtained with some TS-1 samples having different chemical-physical properties, and analyzing in detail the effect of the more important reaction parameters, we could formulate some hypothesis concerning the reaction network and mechanism. Part C of my thesis deals with the hydroxylation of phenol to hydroquinone and catechol. This reaction is already industrially applied but, for economical reason, an improvement of the selectivity to the para di-hydroxilated compound and a decrease of the selectivity to the ortho isomer would be desirable. Also in this case, the catalyst used was the TS-1. The aim of my research was to find out a method to control the selectivity ratio between the two isomers, and finally to make the industrial process more flexible, in order to adapt the process performance in function of fluctuations of the market requirements. The reaction was carried out in both a batch stirred reactor and in a re-circulating fixed-bed reactor. In the first system, the effect of various reaction parameters on catalytic behaviour was investigated: type of solvent or co-solvent, and particle size. With the second reactor type, I investigated the possibility to use a continuous system, and the catalyst shaped in extrudates (instead of powder), in order to avoid the catalyst filtration step. Finally, part D deals with the study of a new process for the valorisation of glycerol, by means of transformation into valuable chemicals. This molecule is nowadays produced in big amount, being a co-product in biodiesel synthesis; therefore, it is considered a raw material from renewable resources (a bio-platform molecule). Initially, we tested the oxidation of glycerol in the liquid-phase, with hydrogen peroxide and TS-1. However, results achieved were not satisfactory. Then we investigated the gas-phase transformation of glycerol into acrylic acid, with the intermediate formation of acrolein; the latter can be obtained by dehydration of glycerol, and then can be oxidized into acrylic acid. Actually, the oxidation step from acrolein to acrylic acid is already optimized at an industrial level; therefore, we decided to investigate in depth the first step of the process. I studied the reactivity of heterogeneous acid catalysts based on sulphated zirconia. Tests were carried out both in aerobic and anaerobic conditions, in order to investigate the effect of oxygen on the catalyst deactivation rate (one main problem usually met in glycerol dehydration). Finally, I studied the reactivity of bifunctional systems, made of Keggin-type polyoxometalates, either alone or supported over sulphated zirconia, in this way combining the acid functionality (necessary for the dehydrative step) with the redox one (necessary for the oxidative step). In conclusion, during my PhD work I investigated reactions that apply the “green chemistry” rules and strategies; in particular, I studied new greener approaches for the synthesis of chemicals (Part A and Part B), the optimisation of reaction parameters to make the oxidation process more flexible (Part C), and the use of a bioplatform molecule for the synthesis of a chemical intermediate (Part D).

Quantifying the Economics of Medical Malpractice - A View from a Civil Law Perspective

Life is full of uncertainties. Legal rules should have a clear intention, motivation and purpose in order to diminish daily uncertainties. However, practice shows that their consequences are complex and hard to predict. For instance, tort law has the general objectives of deterring future negligent behavior and compensating the victims of someone else's negligence. Achieving these goals are particularly difficult in medical malpractice cases. To start with, when patients search for medical care they are typically sick in the first place. In case harm materializes during the treatment, it might be very hard to assess if it was due to substandard medical care or to the patient's poor health conditions. Moreover, the practice of medicine has a positive externality on the society, meaning that the design of legal rules is crucial: for instance, it should not result in physicians avoiding practicing their activity just because they are afraid of being sued even when they acted according to the standard level of care. The empirical literature on medical malpractice has been developing substantially in the past two decades, with the American case being the most studied one. Evidence from civil law tradition countries is more difficult to find. The aim of this thesis is to contribute to the empirical literature on medical malpractice, using two civil law countries as a case-study: Spain and Italy. The goal of this thesis is to investigate, in the first place, some of the consequences of having two separate sub-systems (administrative and civil) coexisting within the same legal system, which is common in civil law tradition countries with a public national health system (such as Spain, France and Portugal). When this holds, different procedures might apply depending on the type of hospital where the injury took place (essentially whether it is a public hospital or a private hospital). Therefore, a patient injured in a public hospital should file a claim in administrative courts while a patient suffering an identical medical accident should file a claim in civil courts. A natural question that the reader might pose is why should both administrative and civil courts decide medical malpractice cases? Moreover, can this specialization of courts influence how judges decide medical malpractice cases? In the past few years, there was a general concern with patient safety, which is currently on the agenda of several national governments. Some initiatives have been taken at the international level, with the aim of preventing harm to patients during treatment and care. A negligently injured patient might present a claim against the health care provider with the aim of being compensated for the economic loss and for pain and suffering. In several European countries, health care is mainly provided by a public national health system, which means that if a patient harmed in a public hospital succeeds in a claim against the hospital, public expenditures increase because the State takes part in the litigation process. This poses a problem in a context of increasing national health expenditures and public debt. In Italy, with the aim of increasing patient safety, some regions implemented a monitoring system on medical malpractice claims. However, if properly implemented, this reform shall also allow for a reduction in medical malpractice insurance costs. This thesis is organized as follows. Chapter 1 provides a review of the empirical literature on medical malpractice, where studies on outcomes and merit of claims, costs and defensive medicine are presented. Chapter 2 presents an empirical analysis of medical malpractice claims arriving to the Spanish Supreme Court. The focus is on reversal rates for civil and administrative decisions. Administrative decisions appealed by the plaintiff have the highest reversal rates. The results show a bias in lower administrative courts, which tend to focus on the State side. We provide a detailed explanation for these results, which can rely on the organization of administrative judges career. Chapter 3 assesses predictors of compensation in medical malpractice cases appealed to the Spanish Supreme Court and investigates the amount of damages attributed to patients. The results show horizontal equity between administrative and civil decisions (controlling for observable case characteristics) and vertical inequity (patients suffering more severe injuries tend to receive higher payouts). In order to execute these analyses, a database of medical malpractice decisions appealed to the Administrative and Civil Chambers of the Spanish Supreme Court from 2006 until 2009 (designated by the Spanish Supreme Court Medical Malpractice Dataset (SSCMMD)) has been created. A description of how the SSCMMD was built and of the Spanish legal system is presented as well. Chapter 4 includes an empirical investigation of the effect of a monitoring system for medical malpractice claims on insurance premiums. In Italy, some regions adopted this policy in different years, while others did not. The study uses data on insurance premiums from Italian public hospitals for the years 2001-2008. This is a significant difference as most of the studies use the insurance company as unit of analysis. Although insurance premiums have risen from 2001 to 2008, the increase was lower for regions adopting a monitoring system for medical claims. Possible implications of this system are also provided. Finally, Chapter 5 discusses the main findings, describes possible future research and concludes.

Reexamining the Role of Incarceration and Stigma in Criminal Law

One of the ways by which the legal system has responded to different sets of problems is the blurring of the traditional boundaries of criminal law, both procedural and substantive. This study aims to explore under what conditions does this trend lead to the improvement of society's welfare by focusing on two distinguishing sanctions in criminal law, incarceration and social stigma. In analyzing how incarceration affects the incentive to an individual to violate a legal standard, we considered the crucial role of the time constraint. This aspect has not been fully explored in the literature on law and economics, especially with respect to the analysis of the beneficiality of imposing either a fine or a prison term. We observed that that when individuals are heterogeneous with respect to wealth and wage income, and when the level of activity can be considered a normal good, only the middle wage and middle income groups can be adequately deterred by a fixed fines alone regime. The existing literature only considers the case of the very poor, deemed as judgment proof. However, since imprisonment is a socially costly way to deprive individuals of their time, other alternatives may be sought such as the imposition of discriminatory monetary fine, partial incapacitation and other alternative sanctions. According to traditional legal theory, the reason why criminal law is obeyed is not mainly due to the monetary sanctions but to the stigma arising from the community’s moral condemnation that accompanies conviction or merely suspicion. However, it is not sufficiently clear whether social stigma always accompanies a criminal conviction. We addressed this issue by identifying the circumstances wherein a criminal conviction carries an additional social stigma. Our results show that social stigma is seen to accompany a conviction under the following conditions: first, when the law coincides with the society's social norms; and second, when the prohibited act provides information on an unobservable attribute or trait of an individual -- crucial in establishing or maintaining social relationships beyond mere economic relationships. Thus, even if the social planner does not impose the social sanction directly, the impact of social stigma can still be influenced by the probability of conviction and the level of the monetary fine imposed as well as the varying degree of correlation between the legal standard violated and the social traits or attributes of the individual. In this respect, criminal law serves as an institution that facilitates cognitive efficiency in the process of imposing the social sanction to the extent that the rest of society is boundedly rational and use judgment heuristics. Paradoxically, using criminal law in order to invoke stigma for the violation of a legal standard may also serve to undermine its strength. To sum, the results of our analysis reveal that the scope of criminal law is narrow both for the purposes of deterrence and cognitive efficiency. While there are certain conditions where the enforcement of criminal law may lead to an increase in social welfare, particularly with respect to incarceration and stigma, we have also identified the channels through which they could affect behavior. Since such mechanisms can be replicated in less costly ways, society should first try or seek to employ these legal institutions before turning to criminal law as a last resort.