Avaliação das propriedades físico-químicas de sistemas a base de carboximetilcelulose e poli (N-isopropilacrilamida) em soluções aquosas para aplicação na indústria do petróleo

Sustainable development is a major challenge in the oil industry and has aroused growing interest in research to obtain materials from renewable sources. Carboxymethylcellulose (CMC) is a polysaccharide derived from cellulose and becomes attractive because it is water-soluble, renewable, biodegradable and inexpensive, as well as may be chemically modified to gain new properties. Among the derivatives of carboxymethylcellulose, systems have been developed to induce stimuli-responsive properties and extend the applicability of multiple-responsive materials. Although these new materials have been the subject of study, understanding of their physicochemical properties, such as viscosity, solubility and particle size as a function of pH and temperature, is still very limited. This study describes systems of physical blends and copolymers based on carboxymethylcellulose and poly (N-isopropylacrylamide) (PNIPAM), with different feed percentage compositions of the reaction (25CMC, 50CMC e 75CMC), in aqueous solution. The chemical structure of the polymers was investigated by infrared and CHN elementary analysis. The physical blends were analyzed by rheology and the copolymers by UV-visible spectroscopy, small-angle X-ray scattering (SAXS), dynamic light scattering (DLS) and zeta potential. CMC and copolymer were assessed as scale inhibitors of calcium carbonate (CaCO3) using dynamic tube blocking tests and chemical compatibility tests, as well as scanning electron microscopy (SEM). Thermothickening behavior was observed for the 50 % CMC_50 % PNIPAM and 25 % CMC_75 % PNIPAM physical blends in aqueous solution at concentrations of 6 and 2 g/L, respectively, depending on polymer concentration and composition. For the copolymers, the increase in temperature and amount of PNIPAM favored polymer-polymer interactions through hydrophobic groups, resulting in increased turbidity of polymer solutions. Particle size decreased with the rise in copolymer PNIPAM content as a function of pH (3-12), at 25 °C. Larger amounts of CMC result in a stronger effect of pH on particle size, indicating pH-responsive behavior. Thus, 25CMC was not affected by the change in pH, exhibiting similar behavior to PNIPAM. In addition, the presence of acidic or basic additives influenced particle size, which was smaller in the presence of the additives than in distilled water. The results of zeta potential also showed greater variation for polymers in distilled water than in the presence of acids and bases. The lower critical solution temperature (LCST) of PNIPAM determined by DLS corroborated the value obtained by UV-visible spectroscopy. SAXS data for PNIPAM and 50CMC indicated phase transition when the temperature increased from 32 to 34 °C. A reduction in or absence of electrostatic properties was observed as a function of increased PNIPAM in copolymer composition. Assessment of samples as scale inhibitors showed that CMC performed better than the copolymers. This was attributed to the higher charge density present in CMC. The SEM micrographs confirmed morphological changes in the CaCO3 crystals, demonstrating the scale inhibiting potential of these polymers

Um monitor de metadados de QoS e QoC para plataformas de middleware

Context-aware applications are typically dynamic and use services provided by several sources, with different quality levels. Context information qualities are expressed in terms of Quality of Context (QoC) metadata, such as precision, correctness, refreshment, and resolution. On the other hand, service qualities are expressed via Quality of Services (QoS) metadata such as response time, availability and error rate. In order to assure that an application is using services and context information that meet its requirements, it is essential to continuously monitor the metadata. For this purpose, it is needed a QoS and QoC monitoring mechanism that meet the following requirements: (i) to support measurement and monitoring of QoS and QoC metadata; (ii) to support synchronous and asynchronous operation, thus enabling the application to periodically gather the monitored metadata and also to be asynchronously notified whenever a given metadata becomes available; (iii) to use ontologies to represent information in order to avoid ambiguous interpretation. This work presents QoMonitor, a module for QoS and QoC metadata monitoring that meets the abovementioned requirement. The architecture and implementation of QoMonitor are discussed. To support asynchronous communication QoMonitor uses two protocols: JMS and Light-PubSubHubbub. In order to illustrate QoMonitor in the development of ubiquitous application it was integrated to OpenCOPI (Open COntext Platform Integration), a Middleware platform that integrates several context provision middleware. To validate QoMonitor we used two applications as proofof- concept: an oil and gas monitoring application and a healthcare application. This work also presents a validation of QoMonitor in terms of performance both in synchronous and asynchronous requests

MyPersonal-EPG: um EPG personalizável e com suportes a recomendações para o SBTVD

In this work we present the architecture and implementation of MyPersonal-EPG, a personal EPG with support to recommendations, built on top of the Ginga middleware, that fulfill the following requirements: (i) to allow users to build their own personal programming grids, based on programming guides from several broadcasters; (ii) to offer a mechanism to tune the desired channels on the moment the selected programs are about to begin; (iii) to allow users to select the desired programs categories; (iv) to offer programs recommendations, in both synchronous and asynchronous way, based on the categories previously selected by users; (v) to allow users to modify the current configuration options; (vi) to allow the creation of several users accounts, so that each user can store its own information. The application‟s usability test is also presented and its results are discussed and analyzed

In Vitro Study of Fracture Load and Fracture Pattern of Ceramic Crowns: A Finite Element and Fractography Analysis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Osmocondicionamento de sementes de salsa (Petroselinum sativum Hoffm.) em diferentes potenciais hídricos

A germinação de sementes de salsa (Petroselinum sativum Hoffm.) é lenta e desuniforme, sendo a contagem do teste padrão de germinação recomendada aos 10 e 28 dias e a emergência em campo é relativamente longa, justificando o uso de técnicas que acelerem e uniformizem o processo germinativo: um método promissor é o osmocondicionamento. No presente trabalho, objetivou-se avaliar os efeitos dos diferentes potenciais de osmocondicionamento, com PEG 6000, na germinação de sementes de salsa e identificar o potencial osmótico ótimo para aumentar a germinação destas sementes. Sementes das cultivares Lisa e Portuguesa de dois lotes, adquiridas no comércio local foram osmocondicionadas pelo método de imersão direta das mesmas em soluções aquosas com potencial hídrico: 0,0, -0,5, -1,0 e -1,5 MPa, obtidos com a adição de PEG 6.000, sob aeração constante a 25ºC por 144 horas, como testemunha utilizaram-se sementes não osmocondicionadas. As variáveis analisadas foram: porcentagem de germinação (10 e 28 dias), velocidade de germinação e índice de velocidade de germinação. O osmocondicionamento aumenta a porcentagem e a velocidade de germinação de sementes de salsa, sendo que, o potencial osmótico indicado situa-se entre -1,0 e -1,5 MPa.

The ultrastructure of Sorubim lima (Teleostei, Siluriformes, Pimelodidae) spermatogenesis: premeiotic and meiotic periods

The ultrastructure of Sorubim lima spermatogenesis during the premeiotic and meiotic periods was studied. Our observations showed that the germ cells in the cysts are connected by cytoplasmic bridges and the mitotic and meiotic divisions are slightly asynchronous, the first and the last spermatogonial generations differ in the cellular and nuclear volume, nucleolus, chromatin condensation, distribution, size, density, and shape of the mitochondria, presence of 'lamellae anulata', amount and dimension of the 'nuages', and movement of the centrioles. In addition to the nuclear prophase structures, the spermatocyte I shows changes in all other cellular organelles and elongated vesicles appear in the cytoplasm. The accentuated cytoplasmic density and thickened walled vesicles are morphological characteristics that differentiate spermatocytes II from the other germ cells in the cysts of Sorubim lima testis. (C) 1999 Harcourt Publishers Ltd.

Female reproductive system of the sugarcane spittlebug Mahanarva fimbriolata (Auchenorrhyncha): Vitellogenesis dynamics and protein quantification

The present study aimed describing the ovaries of the sugarcane spittlebug Mahanarva fimbriolata which are meroistic telotrophic with nurse cells and oocytes located in the tropharium. SEM revealed paired ovaries located dorsolaterally around the intestine, and oocytes exhibiting shapes ranging from round (less developed) to elliptic (more developed), suggesting a simultaneous, although, asynchronous development. Based on histological data we classified the oocytes in stages from I to V. Stage I oocytes exhibit follicular epithelium with cubic and/or prismatic cells, fine cytoplasmic granules. Stage II oocytes present intercellular spaces in the follicular epithelium due to the incorporation of yolk elements from the hemolymph. Small granules are present in the periphery of oocytes while larger granules are observed in the center. Stage III oocytes are larger and intercellular spaces in the follicular epithelium are evident, as well as the interface between follicular epithelium and oocyte. Yolk granules of different sizes are present in the cytoplasm. During this stage, chorion deposition initiates. Stage IV oocytes exhibit squamous follicular cells and larger intercellular spaces when compared to those observed in the previous stage. The oocyte cytoplasm present granular and viscous yolk, the latter is the result of the breakdown of granules. Stage V oocytes exhibit a follicular epithelium almost completely degenerated, smaller quantities of granular yolk and large amounts of viscous yolk. Based on our findings we established the sequence of yolk deposition in M. fimbriolata oocyte as follows: proteins and lipids, which are first produced by endogenous processes in stages I and II oocytes. Exogenous incorporation begins in stage III. In stages I and II oocytes, lipids are also produced by follicular epithelial cells. The third element to be deposited is polysaccharides, mainly found as complexes. Therefore, the yolk present in the oocytes of this species consists of glycolipoproteins. Molecular weights of proteins present in M. fimbriolata oocytes ranged from 10 to 92 KDa, differently from vitellogenin, the most common protein present in insect oocytes, weighing approximately 180 KDa. (c) 2006 Elsevier Ltd. All rights reserved.

Structure, properties and applications of rhamnolipids produced by Pseudomonas aeruginosa L2-1 from cassava wastewater

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of C/N Ratio and Physicochemical Conditions on the production of Rhamnolipids by Pseudomonas Aeruginosa LBI

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Reproductive biology of the smooth butterfly ray Gymnura micrura

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Properties of a biosurfactant produced by Bacillus pumilus using vinasse and waste frying oil as alternative carbon sources

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Thermotropic phase behavior in aqueous mixtures of dioctadecyldimethylammonium bromide and alkyltrimethylammonium bromide surfactant series studied by differential scanning calorimetry

The effect of the micelle-forming surfactant series alkyltrimethylammonium bromide (C(n)TAB, n = 12, 14, 16 and 18) on the thermotropic phase behavior of dioctadecyldimethylammonium bromide (DODAB) vesicles in water was investigated by differential scanning calorimetry at constant 5.0 mM total surfactant concentration and varying individual surfactant concentrations. The pre-, post- and main transition temperatures (T-s, T-p and T-m), melting enthalpy (Delta H) and peak width of the main transition (Delta T-1/2) are reported as a function of the surfactant molar fraction. No clear dependence of these parameters on the C(n)TAB chain length was found. At 5 mM, neat DODAB in water exhibits two transition temperatures, T-s = 32.1 and T-m = 42.7 degrees C, as obtained from the DSC upscans, but not a clear T-p. For every n, except n = 12, T-s vanishes as CnTAB concentration increases and approaches CMC. T-m behaves differently for different n, the longer C(14)TAB and C(16)TAB decrease, while C(18)TAB increases T-m with increasing concentration. The data indicate that changes in T-m, T-s, T-p and Delta H of the transition are related not only to the extent of C(n)TAB affinity to DODAB but also to the surfactant chain length. Accordingly, C18TAB yields a more compact bilayer, thus increasing T-m, while C(14)TAB and C(1G)TAB yield a less organized bilayer and reduce T-m. C(12)TAB does not much affect T-s and T-m, although it yields T-p approximate to 51.6 degrees C. (C) 2008 Elsevier B.V. All rights reserved.

A fluorescence probe study of gemini surfactants in aqueous solution: a comparison between n-2-n and n-6-n series of the alkanediyl-a,w-bis (dimethylalkylammonium bromides)

Two series of alkanediyl-a,w-bis (dimethylalkylammonium bromide (n-2-n and n-6-n; n=8, 10,12, and 16) have been synthesized and their micelles properties studied in aqueous solution using pyrene, pyrenecarboxaldehyde (PCA) and 1,8 anilinonaphtalene sulfonic acid sodium salt (ANS) as fluorescent probes. The micelles from these surfactants have been characterized on the basis of the information provided by micelle-solubilized fluorescent probes. The obtained results indicated that the surfactant concentration at which a marked decrease in l max parameter of pyrenecarboxaldehyde (PCA) occurs corresponds to the CMC determined by conductimetric measurements. Changes in the emission spectra of ANS and PCA observed in the submicellar range for both surfactants series (n-2-n and n-6-n) were interpreted as formation of pre-aggregates. It was found that the dimeric surfactants with long spacer (s= 6) form more hydrated aggregates when compared with those formed by the n-2-n and CnTAB surfactants series. This was attributed to a more difficult packing of n-6-n surfactant molecules to form micelles.

Soil remediation using a coupled process: soil washing with surfactant followed by photo-Fenton oxidation

In the present work the use of a coupled process, soil washing and photo-Fenton oxidation, was investigated for remediation of a soil contaminated with p.p'-DDT (DDT) and p.p'-DDE (DDE), and a soil artificially contaminated with diesel. In the soil washing experiments,Triton X-100(TX-100) aqueous solutions were used at different concentrations to obtain wastewaters with different compositions. Removal efficiencies of 66% (DDT). 80% (DDE) and 100% (diesel) were achieved for three sequential washings using a TX-100 solution strength equivalent to 12 times the effective critical micelle concentration of the surfactant (12 CMC(eff)). The wastewater obtained was then treated using a solar photo-Fenton process. After 6 h irradiation, 99, 95 and 100% degradation efficiencies were achieved for DDT, DDE and diesel, respectively. In all experiments, the concentration of dissolved organic carbon decreased by at least 95%, indicating that residual concentration of contaminants and/or TX-100 in the wastewater was very low. The co-extraction of metals was also evaluated. Among the metals analyzed (Pb, Cr, Ni, Cu. Cd, Mn and Co), only Cr and Mn were detected in the wastewater at concentrations above the maximum value permitted by current Brazilian legislation. The effective removal of contaminants from soil by the TX-100 washing process, together with the high degradation efficiency of the solar photo-Fenton process, suggests that this procedure could be a useful option for soil remediation. (C) 2009 Elsevier B.V. All rights reserved.

Effect of addition of different hydrocolloids on pasting, thermal, and rheological properties of cassava starch

Amidos e gomas são hidrocoloides frequentemente usados em sistemas alimentícios com a finalidade de fornecer textura, umidade e mobilidade de água. A interação amido-goma em sistemas alimentícios pode alterar o inchamento do grânulo de amido e as suas propriedades de gelatinização e reológicas. Neste trabalho, o efeito da adição de goma xantana (GX), carboximetilcelulose sódica (CMC) e carragena (CAR) nas concentrações de 0,15, 0,25, 0,35 e 0,45% (p/v) sobre as propriedades de pasta, térmicas e reológicas do amido de mandioca foi estudado. O Poder de inchamento (PI) e a Microscopia Eletrônica de Varredura (MEV) dos géis de amido também foram avaliados. Os resultados obtidos mostraram que a GX apresentou forte interação com o amido, penetrando entre os grânulos e provocando aumento das viscosidades de pasta, PI, G' e G, e redução da retrogradação do amido; CMCS aumentou as viscosidades de pasta, PI, G' e G das misturas, principalmente em função da sua maior capacidade de reter água, e não por causa da interação com o amido; CAR não modificou qualquer das propriedades do amido, porque não houve nenhuma interação entre essa goma e o amido de mandioca nas concentrações usadas.