Hot deformation behaviour of Mg–3Al alloy—A study using processing map

The hot deformation behaviour of Mg–3Al alloy has been studied using the processing-map technique. Compression tests were conducted in the temperature range 250–550 °C and strain rate range 3 × 10−4 to 102 s−1 and the flow stress data obtained from the tests were used to develop the processing map. The various domains in the map corresponding to different dissipative characteristics have been identified as follows: (i) grain boundary sliding (GBS) domain accommodated by slip controlled by grain boundary diffusion at slow strain-rates (<10−3 s−1) in the temperature range from 350 to 450 °C, (ii) two different dynamic recrystallization (DRX) domains with a peak efficiency of 42% at 550 °C/10−1 s−1 and 425 °C/102 s−1 governed by stress-assisted cross-slip and thermally activated climb as the respective rate controlling mechanisms and (iii) dynamic recovery (DRV) domain below 300 °C in the intermediate strain rate range from 3 × 10−2 to 3 × 10−1 s−1. The regimes of flow instability have also been delineated in the processing map using an instability criterion. Adiabatic shear banding at higher strain rates (>101 s−1) and solute drag by substitutional Al atoms at intermediate strain rates (3 × 10−2 to 3 × 10−1 s−1) in the temperature range (350–450 °C) are responsible for flow instability. The relevance of these mechanisms with reference to hot working practice of the material has been indicated. The processing maps of Mg–3Al alloy and as-cast Mg have been compared qualitatively to elucidate the effect of alloying with aluminum on the deformation behaviour of magnesium.

Low-Temperature Processing of ZrB2-ZrC Composites by Reactive Hot Pressing

Dense ZrB2-ZrC and ZrB2-ZrC x∼0.67 composites have been produced by reactive hot pressing (RHP) of stoichiometric and nonstoichiometric mixtures of Zr and B4C powders at 40 MPa and temperatures up to 1600 °C for 30 minutes. The role of Ni addition on reaction kinetics and densification of the composites has been studied. Composites of ∼97 pct relative density (RD) have been produced with the stoichiometric mixture at 1600 °C, while the composite with ∼99 pct RD has been obtained with excess Zr at 1200 °C, suggesting the formation of carbon deficient ZrC x that significantly aids densification by plastic flow and vacancy diffusion mechanism. Stoichiometric and nonstoichiometric composites have a hardness of ∼20 GPa. The grain sizes of ZrB2 and ZrC x∼0.67 are ∼0.6 and 0.4 μm, respectively, which are finer than those reported in the literature.

Overview of the 2015 ALTA shared task: Identifying French cognates in English text

This paper presents an overview of the 6th ALTA shared task that ran in 2015. The task was to identify in English texts all the potential cognates from the perspective of the French language. In other words, identify all the words in the English text that would acceptably translate into a similar word in French. We present the motivations for the task, the description of the data and the results of the 4 participating teams. We discuss the results against a baseline and prior work.

Mesh Processing for Computerized Facial Anthropometry

Understanding of the shape and size of different features of the human body from scanned data is necessary for automated design and evaluation of product ergonomics. In this paper, a computational framework is presented for automatic detection and recognition of important facial feature regions, from scanned head and shoulder polyhedral models. A noise tolerant methodology is proposed using discrete curvature computations, band-pass filtering, and morphological operations for isolation of the primary feature regions of the face, namely, the eyes, nose, and mouth. Spatial disposition of the critical points of these isolated feature regions is analyzed for the recognition of these critical points as the standard landmarks associated with the primary facial features. A number of clinically identified landmarks lie on the facial midline. An efficient algorithm for detection and processing of the midline, using a point sampling technique, is also presented. The results obtained using data of more than 20 subjects are verified through visualization and physical measurements. A color based and triangle skewness based schemes for isolation of geometrically nonprominent features and ear region are also presented. [DOI: 10.1115/1.3330420]

A reverse Stroop task with mouse tracking

In a reverse Stroop task, observers respond to the meaning of a color word irrespective of the color in which the word is printed—for example, the word red may be printed in the congruent color (red), an incongruent color (e.g., blue), or a neutral color (e.g., white). Although reading of color words in this task is often thought to be neither facilitated by congruent print colors nor interfered with incongruent print colors, this interference has been detected by using a response method that does not give any bias in favor of processing of word meanings or processing of print colors. On the other hand, evidence for the presence of facilitation in this task has been scarce, even though this facilitation is theoretically possible. By modifying the task such that participants respond to a stimulus color word by pointing to a corresponding response word on a computer screen with a mouse, the present study investigated the possibility that not only interference but also facilitation would take place in a reverse Stroop task. Importantly, in this study, participants’ responses were dynamically tracked by recording the entire trajectories of the mouse. Arguably, this method provided richer information about participants’ performance than traditional measures such as reaction time and accuracy, allowing for more detailed (and thus potentially more sensitive) investigation of facilitation and interference in the reverse Stroop task. These trajectories showed that the mouse’s approach toward correct response words was significantly delayed by incongruent print colors but not affected by congruent print colors, demonstrating that only interference, not facilitation, was present in the current task. Implications of these findings are discussed within a theoretical framework in which the strength of association between a task and its response method plays a critical role in determining how word meanings and print colors interact in reverse Stroop tasks.

Phonetic tone signals quantity and word structure

Many languages exploit suprasegmental devices in signaling word meaning. Tone languages exploit fundamental frequency whereas quantity languages rely on segmental durations to distinguish otherwise similar words. Traditionally, duration and tone have been taken as mutually exclusive. However, some evidence suggests that, in addition to durational cues, phonological quantity is associated with and co-signaled by changes in fundamental frequency in quantity languages such as Finnish, Estonian, and Serbo-Croat. The results from the present experiment show that the structure of disyllabic word stems in Finnish are indeed signaled tonally and that the phonological length of the stressed syllable is further tonally distinguished within the disyllabic sequence. The results further indicate that the observed association of tone and duration in perception is systematically exploited in speech production in Finnish.

Word-of-mouth -viestintään vaikuttavat tekijät Case: Agronomiliiton suosittelukampanja

Tämän tutkimuksen tavoitteena oli tarkastella laadullisten tutkimuskeinojen avulla keskeisten tekijöiden etenkin palkitsemisen vaikutusta word-of-mouth -viestintään. Teoriakatsauksen perusteella tutkimusaluetta lähestyttiin tarkastelemalla viittä eri aihealuetta, suosittelijan sisäistä motivaatiota, kokemusta tuotteen tai palvelun ominaisuuksista, suhdetta yrityksen kanssa ja suosituksen vastaanottajan kanssa sekä palkitsemista ja suosittelukampanjaa. Tutkimuksen teoreettisessa osuudessa avattiin käsite word-of-mouth -viestintä ja suosittelumarkkinointi sekä selvitettiin word-of-mouth -viestintään vaikuttavia keskeisiä tekijöitä, jotta suosittelupäätökseen liittyviä tekijöitä olemassa olevan tutkimustiedon avulla. Empiirinen tutkimus toteutettiin laadullisena tutkimuksena, jossa tutkimuksen casena oli Agronomiliitto ry:n suosittelukampanja. Tutkimuksessa haastateltiin Helsingin yliopiston maatalous-metsätieteellisen tiedekunnan syksyn 2009 tutoreita koskien heille suunnattua jäsenhankintakampanjaa. Kampanjan tarkoituksena oli saada tutorit suosittelemaan Agronomiliiton jäsenyyttä uusille opiskelijoille. Parhaiten kampanjassa menestyneet tutorit palkittiin. Kahdeksasta haastateltavasta seitsemän oli Agronomiliiton jäseniä. Haastateltavista kolme palkittiin hyvästä menestyksestä kampanjassa. Aineistonkeruumenetelmänä käytettiin puolistrukturoitua ja henkilökohtaista teemahaastattelua. Haastatteluissa pyrittiin ennen kaikkea selvittämään haastateltavien ajatuksia liittyen word-of-mouth -viestintään sekä suosittelusta palkitsemiseen. Tutkimus antaa suuntaa, että sisäisellä motivaatiotekijöillä on suuri merkitys suositteluviestinnän tapahtumiselle. Suosittelijan tulee tunnistaa suositeltavasta tuotteesta tai palvelusta koetut hyödyt. Suosittelua myös edesauttaa jos suosittelija omaa mielipidejohtajan ominaisuuksia. Palkitseminen toimii kannustimena suositella, mutta palkitsemisjärjestelmä tulee miettiä huolellisesti, jotta suosittelija ei koe suosittelun vähentävän omaa tai suositteluviestin uskottavuutta. Tutkimuksen tulokset viittaavat molempien, suosittelijan ja suosittelun vastaanottajan palkitsemisen olevan paras palkitsemisjärjestelmä suosittelukampanjassa.

Minimizing total weighted tardiness on a batch-processing machine with non-agreeable release times and due dates

This study considers the scheduling problem observed in the burn-in operation of semiconductor final testing, where jobs are associated with release times, due dates, processing times, sizes, and non-agreeable release times and due dates. The burn-in oven is modeled as a batch-processing machine which can process a batch of several jobs as long as the total sizes of the jobs do not exceed the machine capacity and the processing time of a batch is equal to the longest time among all the jobs in the batch. Due to the importance of on-time delivery in semiconductor manufacturing, the objective measure of this problem is to minimize total weighted tardiness. We have formulated the scheduling problem into an integer linear programming model and empirically show its computational intractability. Due to the computational intractability, we propose a few simple greedy heuristic algorithms and meta-heuristic algorithm, simulated annealing (SA). A series of computational experiments are conducted to evaluate the performance of the proposed heuristic algorithms in comparison with exact solution on various small-size problem instances and in comparison with estimated optimal solution on various real-life large size problem instances. The computational results show that the SA algorithm, with initial solution obtained using our own proposed greedy heuristic algorithm, consistently finds a robust solution in a reasonable amount of computation time.

Perspektiv på språkprocessering

Automatisk språkprocessering har efter mer än ett halvt sekel av forskning blivit ett mycket viktigt område inom datavetenskapen. Flera vetenskapligt viktiga problem har lösts och praktiska applikationer har nått programvarumarknaden. Disambiguering av ord innebär att hitta rätt betydelse för ett mångtydigt ord. Sammanhanget, de omkringliggande orden och kunskap om ämnesområdet är faktorer som kan användas för att disambiguera ett ord. Automatisk sammanfattning innebär att förkorta en text utan att den relevanta informationen går förlorad. Relevanta meningar kan plockas ur texten, eller så kan en ny, kortare text genereras på basen av fakta i den ursprungliga texten. Avhandlingen ger en allmän översikt och kort historik av språkprocesseringen och jämför några metoder för disambiguering av ord och automatisk sammanfattning. Problemområdenas likheter och skillnader lyfts fram och metodernas ställning inom datavetenskapen belyses.

Monobath Processing For Holography

One of the problems encountered when photographic emulsions are used as the recording medium in holography is the appreciable time delay before the reconstruction can be viewed. This is largely due to the number of steps involved in processing and can be annoying in many applications.

Resolving Ambiguities in Confused Online Tamil Characters with Post Processing Algorithms

This paper addresses the problem of resolving ambiguities in frequently confused online Tamil character pairs by employing script specific algorithms as a post classification step. Robust structural cues and temporal information of the preprocessed character are extensively utilized in the design of these algorithms. The methods are quite robust in automatically extracting the discriminative sub-strokes of confused characters for further analysis. Experimental validation on the IWFHR Database indicates error rates of less than 3 % for the confused characters. Thus, these post processing steps have a good potential to improve the performance of online Tamil handwritten character recognition.

Polymer composite/nanocomposite processing and its effect on the electrical properties

One of the biggest challenges when considering polymer nanocomposites for electrical insulation applications lies in determining their electrical properties accurately, which in turn depend on several factors, primary being dispersion of particles in the polymer matrix. With this background, this paper reports an experimental study to understand the effects of different processing techniques on the dispersion of filler particles in the polymer matrix and their related effect on the dielectric properties of the composites. Polymer composite and nanocomposite samples for the study were prepared by mixing 10% by weight of commercially available TiO2 particles of two different sizes in epoxy using different processing methods. A considerable effect of the composite processing method could be seen in the dielectric properties of nanocomposites.

Enhancement of workability in AZ31 alloy-processing maps: Part I,castmaterial

Processing maps developed on the basis of the Dynamic Materials Model provide valuable information that might help the metal working industry in solving problems related to workability and microstructural control in commercial alloys. In this research, the processing maps for an as-cast AZ31 magnesium alloy are presented. The results are validated via microstructural observations, clearly delineating safe and unsafe regimes for further process design of this alloy.