Compact development minimizes the impacts of urban growth on native mammals

Unprecedented global human population growth and rapid urbanization of rural and natural lands highlight the urgent need to integrate biodiversity conservation into planning for urban growth. A challenging question for applied ecologists to answer is: What pattern of urban growth meets future housing demand whilst minimizing impacts on biodiversity? We quantified the consequences for mammals of meeting future housing demand under different patterns of compact and dispersed urban growth in an urbanizing forested landscape in south-eastern Australia. Using empirical data, we predicted impacts on mammals of urban growth scenarios that varied in housing density (compact versus dispersed) and location of development for four target numbers of new dwellings. We predicted that compact developments (i.e. high-density housing) reduced up to 6% of the area of occupancy or abundance of five of the six mammal species examined. In contrast, dispersed developments (i.e. low-density housing) led to increased mammal abundance overall, although results varied between species: as dwellings increased, the abundance or occurrence of two species increased (up to ∼100%), one species showed no change, and three species declined (up to ∼39%). Two ground-dwelling mammal species (Antechinus stuartii and Rattus fuscipes) and a tree-dwelling species (Petaurus australis) were predicted to decline considerably under dispersed rather than compact development. The strongest negative effect of dispersed development was for Petaurus australis (a species more abundant in forested interiors) which exhibited up to a 39% reduction in abundance due to forest loss and an extended negative edge effect from urban settlements into adjacent forests. Synthesis and applications. Our findings demonstrate that, when aiming to meet demand for housing, any form of compact development (i.e. high-density housing) has fewer detrimental impacts on forest-dwelling mammals than dispersed development (i.e. low-density housing). This is because compact development concentrates the negative effects of housing into a small area whilst at the same time preserving large expanses of forests and the fauna they sustain. Landscape planning and urban growth policies must consider the trade-off between the intensity of the threat and area of sprawl when aiming to reduce urbanization impacts.

The City as Laboratory and the Urban-Rural Divide: the Revival of Private Property and its Limits in Post-Mao China

This paper focuses on the revival of private property and its limits in urban China. It explores the emergence of urban property markets; urban property-holding in relation to the complexity of urban governance; “minor property rights apartments” that form a de facto real estate market and cross over the urban-rural divide; the “grey areas” of blurring legal and administrative boundaries in modern China; and recent changes to the rural land system and the rural-urban divide. The conclusion flags the theme of the city as laboratory with regard to the blurring legal and governmental urban-rural distinction.

Determination of a set of surrogate parameters to assess urban stormwater quality

This paper presents the outcomes of a research project, which focused on developing a set of surrogate parameters to evaluate urban stormwater quality using simulated rainfall. Use of surrogate parameters has the potential to enhance the rapid generation of urban stormwater quality data based on on-site measurements and thereby reduce resource intensive laboratory analysis. The samples collected from rainfall simulations were tested for a range of physico-chemical parameters which are key indicators of nutrients, solids and organic matter. The analysis revealed that [total dissolved solids (TDS) and dissolved organic carbon (DOC)]; [total solids (TS) and total organic carbon (TOC)]; [turbidity (TTU)]; [electrical conductivity (EC)]; [TTU and EC] as appropriate surrogate parameters for dissolved total nitrogen (DTN), total phosphorus (TP), total suspended solids (TSS), TDS and TS respectively. Relationships obtained for DTN-TDS, DTN-DOC, and TP-TS demonstrated good portability potential. The portability of the relationship developed for TP and TOC was found to be unsatisfactory. The relationship developed for TDS-EC and TS-EC also demonstrated poor portability.

Investigating challenges and opportunities of water sensitive urban design for knowledge based development of Australian cities

A new approach that is slowly replacing neoclassical models of economic growth and commodity based industrial activities, knowledge based urban development (KBUD) aims to provide opportunities for citiesw to foster knowledge creation, exchange and innovation, and is based on the concepts of both sustainable urban development and economic prosperity; sustainable uses and protection of natural resources are therefore integral parts of KBUD. As such, stormwater, which has been recognised as one of the main culprits of aquatic ecosystem pollution and as therefore a significant threat to the goal of sustainable urban development, needs to be managed in a manner that produces ecologically sound outcomes. Water sensitive urban design (WSUD) is one of the key responses to the need to better management urban stormwater runoff and supports KBUD by providing an alternative, innovative and effective strategy to traditional stormwater management.

Physical characteristics of small ions and their interaction with ultrafine particles in the urban environment

In recent years, the effect of ions and ultrafine particles on ambient air quality and human health has been well documented, however, knowledge about their sources, concentrations and interactions within different types of urban environments remains limited. This thesis presents the results of numerous field studies aimed at quantifying variations in ion concentration with distance from the source, as well as identifying the dynamics of the particle ionisation processes which lead to the formation of charged particles in the air. In order to select the most appropriate measurement instruments and locations for the studies, a literature review was also conducted on studies that reported ion and ultrafine particle emissions from different sources in a typical urban environment. The initial study involved laboratory experiments on the attachment of ions to aerosols, so as to gain a better understanding of the interaction between ions and particles. This study determined the efficiency of corona ions at charging and removing particles from the air, as a function of different particle number and ion concentrations. The results showed that particle number loss was directly proportional to particle charge concentration, and that higher small ion concentrations led to higher particle deposition rates in all size ranges investigated. Nanoparticles were also observed to decrease with increasing particle charge concentration, due to their higher Brownian mobility and subsequent attachment to charged particles. Given that corona discharge from high voltage powerlines is considered one of the major ion sources in urban areas, a detailed study was then conducted under three parallel overhead powerlines, with a steady wind blowing in a perpendicular direction to the lines. The results showed that large sections of the lines did not produce any corona at all, while strong positive emissions were observed from discrete components such as a particular set of spacers on one of the lines. Measurements were also conducted at eight upwind and downwind points perpendicular to the powerlines, spanning a total distance of about 160m. The maximum positive small and large ion concentrations, and DC electric field were observed at a point 20 m downwind from the lines, with median values of 4.4×103 cm-3, 1.3×103 cm-3 and 530 V m-1, respectively. It was estimated that, at this point, less than 7% of the total number of particles was charged. The electrical parameters decreased steadily with increasing downwind distance from the lines but remained significantly higher than background levels at the limit of the measurements. Moreover, vehicles are one of the most prevalent ion and particle emitting sources in urban environments, and therefore, experiments were also conducted behind a motor vehicle exhaust pipe and near busy motorways, with the aim of quantifying small ion and particle charge concentration, as well as their distribution as a function of distance from the source. The study found that approximately equal numbers of positive and negative ions were observed in the vehicle exhaust plume, as well as near motorways, of which heavy duty vehicles were believed to be the main contributor. In addition, cluster ion concentration was observed to decrease rapidly within the first 10-15 m from the road and ion-ion recombination and ion-aerosol attachment were the most likely cause of ion depletion, rather than dilution and turbulence related processes. In addition to the above-mentioned dominant ion sources, other sources also exist within urban environments where intensive human activities take place. In this part of the study, airborne concentrations of small ions, particles and net particle charge were measured at 32 different outdoor sites in and around Brisbane, Australia, which were classified into seven different groups as follows: park, woodland, city centre, residential, freeway, powerlines and power substation. Whilst the study confirmed that powerlines, power substations and freeways were the main ion sources in an urban environment, it also suggested that not all powerlines emitted ions, only those with discrete corona discharge points. In addition to the main ion sources, higher ion concentrations were also observed environments affected by vehicle traffic and human activities, such as the city centre and residential areas. A considerable number of ions were also observed in a woodland area and it is still unclear if they were emitted directly from the trees, or if they originated from some other local source. Overall, it was found that different types of environments had different types of ion sources, which could be classified as unipolar or bipolar particle sources, as well as ion sources that co-exist with particle sources. In general, fewer small ions were observed at sites with co-existing sources, however particle charge was often higher due to the effect of ion-particle attachment. In summary, this study quantified ion concentrations in typical urban environments, identified major charge sources in urban areas, and determined the spatial dispersion of ions as a function of distance from the source, as well as their controlling factors. The study also presented ion-aerosol attachment efficiencies under high ion concentration conditions, both in the laboratory and in real outdoor environments. The outcomes of these studies addressed the aims of this work and advanced understanding of the charge status of aerosols in the urban environment.

Influence of rainfall and catchment characteristics on urban stormwater quality

This thesis presents the outcomes of a comprehensive research study undertaken to investigate the influence of rainfall and catchment characteristics on urban stormwater quality. The knowledge created is expected to contribute to a greater understanding of urban stormwater quality and thereby enhance the design of stormwater quality treatment systems. The research study was undertaken based on selected urban catchments in Gold Coast, Australia. The research methodology included field investigations, laboratory testing, computer modelling and data analysis. Both univariate and multivariate data analysis techniques were used to investigate the influence of rainfall and catchment characteristics on urban stormwater quality. The rainfall characteristics investigated included average rainfall intensity and rainfall duration whilst catchment characteristics included land use, impervious area percentage, urban form and pervious area location. The catchment scale data for the analysis was obtained from four residential catchments, including rainfall-runoff records, drainage network data, stormwater quality data and land use and land cover data. Pollutants build-up samples were collected from twelve road surfaces in residential, commercial and industrial land use areas. The relationships between rainfall characteristics, catchment characteristics and urban stormwater quality were investigated based on residential catchments and then extended to other land uses. Based on the influence rainfall characteristics exert on urban stormwater quality, rainfall events can be classified into three different types, namely, high average intensity-short duration (Type 1), high average intensity-long duration (Type 2) and low average intensity-long duration (Type 3). This provides an innovative approach to conventional modelling which does not commonly relate stormwater quality to rainfall characteristics. Additionally, it was found that the threshold intensity for pollutant wash-off from urban catchments is much less than for rural catchments. High average intensity-short duration rainfall events are cumulatively responsible for the generation of a major fraction of the annual pollutants load compared to the other rainfall event types. Additionally, rainfall events less than 1 year ARI such as 6- month ARI should be considered for treatment design as they generate a significant fraction of the annual runoff volume and by implication a significant fraction of the pollutants load. This implies that stormwater treatment designs based on larger rainfall events would not be feasible in the context of cost-effectiveness, efficiency in treatment performance and possible savings in land area needed. This also suggests that the simulation of long-term continuous rainfall events for stormwater treatment design may not be needed and that event based simulations would be adequate. The investigations into the relationship between catchment characteristics and urban stormwater quality found that other than conventional catchment characteristics such as land use and impervious area percentage, other catchment characteristics such as urban form and pervious area location also play important roles in influencing urban stormwater quality. These outcomes point to the fact that the conventional modelling approach in the design of stormwater quality treatment systems which is commonly based on land use and impervious area percentage would be inadequate. It was also noted that the small uniformly urbanised areas within a larger mixed catchment produce relatively lower variations in stormwater quality and as expected lower runoff volume with the opposite being the case for large mixed use urbanised catchments. Therefore, a decentralised approach to water quality treatment would be more effective rather than an "end-of-pipe" approach. The investigation of pollutants build-up on different land uses showed that pollutant build-up characteristics vary even within the same land use. Therefore, the conventional approach in stormwater quality modelling, which is based solely on land use, may prove to be inappropriate. Industrial land use has relatively higher variability in maximum pollutant build-up, build-up rate and particle size distribution than the other two land uses. However, commercial and residential land uses had relatively higher variations of nutrients and organic carbon build-up. Additionally, it was found that particle size distribution had a relatively higher variability for all three land uses compared to the other build-up parameters. The high variability in particle size distribution for all land uses illustrate the dissimilarities associated with the fine and coarse particle size fractions even within the same land use and hence the variations in stormwater quality in relation to pollutants adsorbing to different sizes of particles.

Prediction of the wash-off of traffic related semi- and non-volatile organic compounds from urban roads under climate change influenced rainfall characteristics

Traffic generated semi and non volatile organic compounds (SVOCs and NVOCs) pose a serious threat to human and ecosystem health when washed off into receiving water bodies by stormwater. Climate change influenced rainfall characteristics makes the estimation of these pollutants in stormwater quite complex. The research study discussed in the paper developed a prediction framework for such pollutants under the dynamic influence of climate change on rainfall characteristics. It was established through principal component analysis (PCA) that the intensity and durations of low to moderate rain events induced by climate change mainly affect the wash-off of SVOCs and NVOCs from urban roads. The study outcomes were able to overcome the limitations of stringent laboratory preparation of calibration matrices by extracting uncorrelated underlying factors in the data matrices through systematic application of PCA and factor analysis (FA). Based on the initial findings from PCA and FA, the framework incorporated orthogonal rotatable central composite experimental design to set up calibration matrices and partial least square regression to identify significant variables in predicting the target SVOCs and NVOCs in four particulate fractions ranging from >300-1 μm and one dissolved fraction of <1 μm. For the particulate fractions range >300-1 μm, similar distributions of predicted and observed concentrations of the target compounds from minimum to 75th percentile were achieved. The inter-event coefficient of variations for particulate fractions of >300-1 μm were 5% to 25%. The limited solubility of the target compounds in stormwater restricted the predictive capacity of the proposed method for the dissolved fraction of <1 μm.

Chemical and source characterisation of size-segregated urban air particulate matter

Recent epidemiological studies have shown a consistent association of the mass concentration of urban air thoracic (PM10) and fine (PM2.5) particles with mortality and morbidity among cardiorespiratory patients. However, the chemical characteristics of different particulate size ranges and the biological mechanisms responsible for these adverse health effects are not well known. The principal aims of this thesis were to validate a high volume cascade impactor (HVCI) for the collection of particulate matter for physicochemical and toxicological studies, and to make an in-depth chemical and source characterisation of samples collected during different pollution situations. The particulate samples were collected with the HVCI, virtual impactors and a Berner low pressure impactor in six European cities: Helsinki, Duisburg, Prague, Amsterdam, Barcelona and Athens. The samples were analysed for particle mass, common ions, total and water-soluble elements as well as elemental and organic carbon. Laboratory calibration and field comparisons indicated that the HVCI can provide a unique large capacity, high efficiency sampling of size-segregated aerosol particles. The cutoff sizes of the recommended HVCI configuration were 2.4, 0.9 and 0.2 μm. The HVCI mass concentrations were in a good agreement with the reference methods, but the chemical composition of especially the fine particulate samples showed some differences. This implies that the chemical characterization of the exposure variable in toxicological studies needs to be done from the same HVCI samples as used in cell and animal studies. The data from parallel, low volume reference samplers provide valuable additional information for chemical mass closure and source assessment. The major components of PM2.5 in the virtual impactor samples were carbonaceous compounds, secondary inorganic ions and sea salt, whereas those of coarse particles (PM2.5-10) were soil-derived compounds, carbonaceous compounds, sea salt and nitrate. The major and minor components together accounted for 77-106% and 77-96% of the gravimetrically-measured masses of fine and coarse particles, respectively. Relatively large differences between sampling campaigns were observed in the organic carbon content of the PM2.5 samples as well as the mineral composition of the PM2.5-10 samples. A source assessment based on chemical tracers suggested clear differences in the dominant sources (e.g. traffic, residential heating with solid fuels, metal industry plants, regional or long-range transport) between the sampling campaigns. In summary, the field campaigns exhibited different profiles with regard to particulate sources, size distribution and chemical composition, thus, providing a highly useful setup for toxicological studies on the size-segregated HVCI samples.

Impacts of fishing gears, fishing methods and fishing effort in the fisheries of Lake Victoria and proposals for management

The initial subsistence fisheries of Lake Victoria were dominated by two indigenous tilapiines, Oreochromis esculentus (Graham 1929) and Oreochromis variabilis Boulenger 1906, exploited with simple fishing crafts and gears that had little impact on the fish stocks (Jackson 1971). Commercial fisheries, targeting the tilapia fishery, started at the beginning of the 20th Centurywhen cotton flax gillnets were first introduced in 1905 into the Nyanza Gulf in Kenya. Gillnets were quickly adopted around the whole lake and consequently, the native methods of fishing soon died out (Jackson 1971). Following the introduction of gillnets, fishing boats and their propulsion methods were also improved. These improvements in fishing capacity coincided with development of urban centres and increasing human population around the lake, which increased the demand for fishery products. To satisfy the increasing demand, fishing effort increased greatly during the 20th century, despite the decline of catch per unit of effort (CPUE) (Jackson 1971; Ogutu-Ohwayo 1990). The initial catch rates of 127mm (5 inch) mesh size gill nets in the tilapia-based fishery, in 1905, was in the range of 50 to 100 fish per gillnet of approximately 50 m in length. However, twenty years later, the catch rates of gillnets of the same mesh size had declined to about six fish per net and gillnets of smaller mesh sizes, which had better catch rates, had been introduced suggesting overfishing (Worthington and Worthington, 1933).

Derivation of an urban materials spectral library through emittance and reflectance spectroscopy

Recent advances in thermal infrared remote sensing include the increased availability of airborne hyperspectral imagers (such as the Hyperspectral Thermal Emission Spectrometer, HyTES, or the Telops HyperCam and the Specim aisaOWL), and it is planned that an increased number spectral bands in the long-wave infrared (LWIR) region will soon be measured from space at reasonably high spatial resolution (by imagers such as HyspIRI). Detailed LWIR emissivity spectra are required to best interpret the observations from such systems. This includes the highly heterogeneous urban environment, whose construction materials are not yet particularly well represented in spectral libraries. Here, we present a new online spectral library of urban construction materials including LWIR emissivity spectra of 74 samples of impervious surfaces derived using measurements made by a portable Fourier Transform InfraRed (FTIR) spectrometer. FTIR emissivity measurements need to be carefully made, else they are prone to a series of errors relating to instrumental setup and radiometric calibration, which here relies on external blackbody sources. The performance of the laboratory-based emissivity measurement approach applied here, that in future can also be deployed in the field (e.g. to examine urban materials in situ), is evaluated herein. Our spectral library also contains matching short-wave (VIS–SWIR) reflectance spectra observed for each urban sample. This allows us to examine which characteristic (LWIR and) spectral signatures may in future best allow for the identification and discrimination of the various urban construction materials, that often overlap with respect to their chemical/mineralogical constituents. Hyperspectral or even strongly multi-spectral LWIR information appears especially useful, given that many urban materials are composed of minerals exhibiting notable reststrahlen/absorption effects in this spectral region. The final spectra and interpretations are included in the London Urban Micromet data Archive (LUMA; http://LondonClimate.info/LUMA/SLUM.html).

The diet of powerful owls (Ninox strenua) and prey availability in a continuum of habitats from disturbed urban fringe to protected forest environments in south-eastern Australia

This study investigates the diet of six breeding pairs of powerful owls in the Yarra Valley Corridor in Victoria, Australia, and compares prey consumption with prey availability. The six sites represent a continuum of habitats, ranging from urban Melbourne, through the urban fringe interface to a more forested landscape. We found that powerful owls in the Yarra Valley Corridor are reliant almost exclusively on arboreal marsupial prey as their preferred diet, with 99% of their overall diet comprising four arboreal marsupial species. These four species (the common ringtail possum, common brushtail possum, sugar glider and greater glider) were also the most abundant species observed while spotlighting; however, their abundance varied along the continuum. There was a strong positive relationship with the presence of these species in the diet and their site-specific availability, indicating that the powerful owl is a generalist hunter, preying on the most available prey at a given site and in a given season. This study suggests that food resources are high in these disturbed urban fringe sites and it is unlikely that food availability in urban environments will limit the potential survival of urban powerful owls.

Laboratory enhanced surveillance for meningococcal disease in Victoria

Objective: To describe the epidemiological and microbiological characteristics and notification patterns of invasive meningococcal disease (IMD) in Victoria between 1990 and 1999.

Methods: Cases of IMD occurring between 1990 and 1995 identified in any of three databases were combined, matching where possible. Statistical modelling provided estimates of cases missing from all datasets. Notification sources for 1999 and 2000 cases were identified. Cases identified from notification and laboratory results provided the data to describe IMD epidemiology between 1990 and 1999.

Results: Between 1990 and 1995, 479 cases of IMD were identified. Three individual datasets each identified between 62 and 82% of cases and 47% of cases were identified in all three datasets. Statistical modelling estimated that between 37 and 83 additional cases were not identified by any dataset. Serogroup B and C strains caused 63 and 33% of culture-positive cases, respectively, with a substantial rise in serogroup C cases in 1999. Epidemiological characteristics remained relatively constant between 1990 and 1998, but an increase in patient age was seen in cases with serogroup C disease in 1999. In addition to three clonal strains seen elsewhere, an additional strain was identified that was unique to Victoria. Since January 1999, only 72% of notifications have come from treating doctors.

Conclusions: Meningococcal disease is of increasing public health significance in Victoria. Laboratory enhanced notification has improved case identification and detailed microbiological information has improved our understanding of the changing epidemiology of this disease. Collaboration with laboratories and other agencies, active investigation of putative cases and microbiological monitoring are important elements in supporting public health decisions about the control of IMD.

Regional and urban Victorian diabetic youth: clinical and quality-of-life outcomes

Objectives: To compare groups of urban and regional Victorian diabetic children and assess their quality of life, diabetes knowledge, access to services and metabolic control.

Methods: Forty-seven children from three regional Victorian communities (Horsham, Warrnambool and Sale; n = 16, 18 and 13, respectively) were compared with 120 age-, sex- and duration of diabetes-matched children attending the Royal Children's Hospital (RCH) diabetes clinic in Melbourne. Quality of life, diabetes knowledge, use of services, and metabolic control were assessed using the child health questionnaire (CHQ PF-50/CF-80); a diabetes-knowledge questionnaire; access to a diabetes nurse educator (DNE), dietitian and complication screening; and indices of mean HbA1C (values are taken every 3 months in the 'yearly HbA1C'), respectively.

Results: Comparisons of CHQ data showed that regional diabetic youth scored significantly lower on most subscales. The greatest deficits were seen in areas of mental health, self-esteem, parent impact (emotional) and family cohesion. Diabetes knowledge and median yearly HbA1C for patients were not significantly different between the regional and urban centres (8.1%, 8.9%, 8.4% and 8.6% at RCH, Horsham, Warrnambool and Sale, respectively). Patients in regional centres had reportedly less access to team-based diabetes care.

Conclusions: Regional youth in Victoria, with similar levels of metabolic control and diabetes knowledge as their urban counterparts, have a markedly lower quality of life, implying a negative synergy between diabetes and the demands of regional lifestyles.

Conservation management and diets of Powerful Owls (Ninox strenua) in outer urban Melbourne, Australia

The Powerful Owl Ninox strenua is Australia’s largest owl, and is mainly found east of the Great Dividing Range on the mainland in tall-open forests. The species is considered rare, both nationally and in the State of Victoria; and threatened in the Greater Melbourne area. Recovery plans for the future conservation management of N. strenua are being prepared in 2 states.

Historically, Powerful Owls have been thought to require large homes ranges (about 1000 ha per pair) in suitable old-growth forest, which provides nest hollows for the owls and their arboreal marsupial prey. Recent research, however, has found N. strenua may be more numerous and breed more successfully in a wider range of habitats than previously believed. In particular, the birds have been found living in forests and woodlands within the greater metropolitan areas of cities. The most extreme case is where a nest tree has been found within 800m of urban settlement and 6km from the centre of Brisbane.

In this paper we report on the diet, habitat use, and conservation management by a number of breeding pairs of owls in outer urban Melbourne. Study sites range from a relatively undisturbed rainforest habitat 80km from central Melbourne, through dry sclerophyll, eucalyptus-dominated open forest with some disturbance to a site 8km from central Melbourne in highly disturbed urban parkland.

Diets of the families of owls were determined by analyzing remains in regurgitated pellets. The data confirm that arboreal marsupials constitute the major prey items, especially the Common Ringtail Possum Pseudocheirus peregrinus. There were differences in diets depending on the availability of prey species, which suggest a level of opportunism not previously suspected. Our study is also the first to confirm the owls capture adult Common Brushtail Possums Trichosurus vulpecula (15% of pellets containing the remains of this large opossum have bones of mature adults at 1 site) and thus take prey up to two and a half times their own weight. As well our data suggest Powerful Owls are not restricted to hollow-dwelling prey, as in some sites the marsupials rested during the day either in leafy nests called dreys (P. peregrinus) or in house roofs (T. vulpecula).

In the most heavily disturbed sites, breeding success has been reduced, and we have evidence that in one particular year the young were eaten by one of the parents. This followed construction of a bicycle track under the nest during the breeding season. Recommendations are made for the future conservation and habitat management of Powerful Owls in the Yarra Valley corridor.