Terapia fotodinâmica e luz branca: aspectos analíticos e perspectivas da viabilidade do tratamento

Photodynamic Therapy (PDT) is a technique used to treat several types of lesions, such as cancer, microbial control, and esthetic dentistry cases. The performance of PDT involves the use of a photosensitizer (PS), which mainly will be located in cancer cells and is irradiated with visible light. This process, when it occurs in the presence of oxygen triggers the formation of reactive oxygen species that are cytotoxic to cells. These species cause cell death and subsequent tumor necrosis. The use of white light as a light source for multispectral Photodynamic Therapy and its consequences to the photodynamic effect is not yet completely established, and therefore there is interest in studying the parameters involved for analyzing the best conditions for applying treatment. The wavelength is crucial to improve the therapeutic effect, since both the optical properties of the biological tissue as the PS depend on these parameters. For FS studied in this work (Photogem®) are most often used wavelengths in the red region, due to their larger penetration depth in biological tissue. Thus, the light source becomes a fundamental aspect, their choice depends on the specific application and is based on the tumor location, light dose to be delivered and FS chosen. Despite all the advantages presented by lasers, the fact of having an emission spectrum essentially monochrome makes only one possible transition possible for the absorption of FS is used. Therefore, more extensive light sources such as light emitting diodes (LED), could be better used in some cases the laser, with the additional advantage of a reduced cost. Therefore, the choice of the white LED comes from an emission spectrum that still wider LED colors defined by allowing greater use of the several absorption bands and with varying depths of operation, according to the wavelength... (Complete abstract click electronic access below)

Avaliação da viabilidade econômica da implantação de uma usina de triagem e compostagem na cidade de Rio Claro-SP

The question of the solid waste is without a doubt one of the biggest problems faced for the world-wide population in the present time, resulting in the call “collapse of the garbage”. In this direction that appears the composting, in the scope of the treatment of organic waste origin, that in Brazil, approximately correspond 50% of the generated volume. However, the rare plants of selection and composting (UTC) existing at least do not obtain auto-to support themselves, increasing to each day the number of deactivations, almost always related the financial questions. In this direction, the present research brings the analysis of the economic viability of the implantation of a UTC for the city of Rio Claro-SP, relating it with the thick organic composition sales, for the cultures of vegetables cultivated in a ray of 30 km of the study area. For in such a way, they had been carried through, calculations concerning the regional demand for organic composition, and the verification of the implantation costs and operation of the plant. The reached results had been the flow of box for the first year of functioning of the UTC, as well as the break-even point between the gotten expenditures and prescriptions. From this relation investment profitability, it was verified that the UTC is presented impracticable under the economic point of view.

Estudo da viabilidade técnica/econômica no aumento da eficiência energética sustentável aplicada à residência unifamiliar

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise da viabilidade econômica na implantação de inversores frequência em sistemas de bombeamento

The present work aims to conduct a study of the economic feasibility of the implementation of variable frequency inverters in pump systems with variable flow rates. The concern with the reduction of energy expenditure in industries raised in 2001 due to the energy crisis that hit Brazil at that time, forcing industries to reduce their electric costs under penalty of fines if this were not done (MOREIRA, 2008). Frequency inverter is an electronic device that allow greater control in the operation of pumping systems and also a reduction in electrical consumption, being a viable solution to achieve a reduction in energy consumption. For the development of this work, approaching important topics in pumping systems was necessary in order to make a correct choice of hydraulic pumping and also other components responsible for the operation of the system , such as electric motors and frequency inverters. In the case study, a theoretical analysis of the behavior of electrical consumption in systems with variable flow rates was performed, comparing when the system is operated via frequency inverters and when the system is operated without such a device. As expected, the result of the implantation of the device was quite satisfactory, and the primary goal of reducing energy expenditure was achieved. Also important to highlight the environmental issue of this work, as all forms of energy production affects nature in some way, achieving a reduction in consumption also contributes indirectly in environmental conservation

Análise de viabilidade da utilização do sorgo sacarino como cultura complementar na entressafra da cana-de-açucar

The sorghum is seen as a complementary option ethanol production in the offseason cane sugar because of its high energy potential and its culture to adapt well to hot climates and dry. This study evaluates the use of planting sweet sorghum as a culture supplement cane sugar in its offseason, leading to findings that show the feasibility of planting sorghum harvests of sugar cane

Viabilidade técnica e econômica na utilização de um sistema fotovoltaico para alimentação de luminárias LED na Faculdade de Engenharia do Campus de Guaratinguetá SP

Solar energy can be considered the largest source of energy available on earth and has attracted in recent decades, attention and interest for its rational use. The use of energy sources in a sustainable way is essential to the survival of future generations, due to the scarcity of natural resources and their exploitation in a disorderly way. This academic work aims to bring a possible alternative to reduce the consumption of eletrical energy, at the University of Engineering – Campus of Guaratinguetá, through the use of a photovoltaic system interconnected to the LED bulbs. For this, the necessary data for the design of the photovoltaic system componentes and their acquisition costs were obtained and three differents configurations were developed to choose the one that bests fits the studied case, considering the return time of the initial investment (payback)

Viabilidade do aproveitamento de resíduos de madeira para produção de móveis

The need to use waste from wood processing industry grows due to environmental demands imposed by laws, so like the need to introduce more competitive products in the market (it means better quality and acceptable cost) who must submit by the rational use of raw material, usually turning waste to sub products, what adds higher value for that. To this research, specific case from Ribon Company, located on Camaçari, Bahia-Brazil, has been studied. It is a treated wood producer. Bulk of monthly wood logs there is 70 m3. Its yield is 71,43%, where bulk of generated waste is monthly 20m3. As an exploitation way from generated waste, it has been suggested some options like: erosion protection to specific areas, a wildlife shelter as an henhouse etc, recreational articles, coal, linings, treadmills. However this research will give focus to the furniture design made of waste. As a conclusion, there is very much need to assign new utilizations to that sub used materials, since there is significant amount to increase company’s productive yield

Análise da viabilidade de simulações com feixes de prótons de 100, 150, 200 e 250 MeV em alvos heterogêneos

In the recent years, the use of proton beams in radiotherapy has been an outstanding progress (SMITH, 2006). Up to now, computed tomography (CT) is a prerequisite for treatment planning in this kind of therapy because it provides the electron density distribution required for calculation of dose and the interval of doses. However, the use of CT images for proton treatment planning ignores fundamental differences in physical interaction processes between photons and protons and is, therefore, potentially inaccurate (SADROZINSKI, 2004). Proton CT (pCT) can in principle directly measure the density distribution needed in a patient for the dose distribution (SCHULTE, et al, 2004). One important problem that should be solved is the implementation of image reconstruction algorithms. In this sense, it is necessary to know how the presence of materials with different density and composition interfere in the energy deposition by ionization and coulomb excitation, during its trajectory. The study was conducted in two stages, was used in both the program SRIM (The Stopping and Range of Ions in Matter) to perform simulations of the interaction of proton beams with pencil beam type. In the first step we used the energies in the range of 100-250 MeV (ZIEGLER, 1999). The targets were set to 50 mm in length for the beam of 100 MeV, due to its interaction with the target, and short-range, and 70 mm for 150, 200 and 250 MeV The target was composed of liquid water and a layer of 6 mm cortical bone (ICRP). It were made 9 simulations varying the position of the heterogeneity of 5 mm. In the second step the energy of 250 MeV was taken out from the simulations, due to its greater energy and less interaction. The targets were diminished to 50 mm thick to standardize the simulations. The layer of bone was divided into two equal parts and both were put in the ends of the target... (Complete abstract click electronic access below)

Utilização de técnicas de planejamento de experimentos na análise de viabilidade de alterações no processo de pintura de grades Antracite em uma indústria automotiva

The search for better performance and competitive advantage in the current market scenario has made organizations keep their focus on quality planning and the use of effective techniques aimed at continuous improvement and optimization of processes and resources. The situation is not different for the painting process in the automotive industry, which has a significant amount of variables and influential external factors. This work, developed at General Motors in São José dos Campos, aims to analyze the feasibility of changing the painting process of the pickup S10 railings in the Antracite color located in the main line to the another line located in a Painting Repair Booth at the plant and, therefore, to study the possibility about reducing the window of cure for Antracite’s enamel by using Design of Experiments’ techniques. Applying this method is possible to find the best arrangement among studied factors of Painting Repair Booth that are, in this case, the Temperature, in Celsius degrees, and Skid’s Steps, in seconds, and it’s also possible to get their behavior according to quality requirements specified by GM rules for the Brightness and Paint Adhesion on the part. As a result, it can conclude that is possible to paint the S10 Antracite railings in the painting process’ line of Painting Repair Booth, and with the new configuration obtained by the Design of Experiments for the process variables, there are significant gains related to the parts’ quality, costs reduction and the optimization of production capacity, much in the main line as in the line of the Painting Repair Booth

Avaliação da viabilidade e desenvolvimento in vitro de oócitos de gatas domésticas após vitrificação em meio suplementado com vitamina E

Pós-graduação em Medicina Veterinária - FCAV

Avaliação da viabilidade de cateter epidural totalmente implantado em equídeos

Pós-graduação em Cirurgia Veterinária - FCAV

Aplicação e viabilidade de micro-organisos potencialmente probióticos em embutido cárneo fermentado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo da viabilidade de sedimentos formulados para a aplicação em estudos ecotoxicológicos e químicos: ênfase para os interferentes endócrinos 17alfa-etinilestradiol e 17beta-estradiol

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeitos da congelação lenta e da vitrificação na viabilidade, ultraestrutura e expressão gênica de embriões caninos produzidos in vivo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alimentação escolar e agricultura familiar: a viabilidade da aplicação da lei federal 11.947 de 2009 sob o ponto de vista de diferentes atores sociais

Pós-graduação em Geografia - IGCE