Optically transparent membrane based on bacterial cellulose/ polycaprolactone

Optically transparent membranes from bacterial cellulose (BC)/polycaprolactone (PCL) have been prepared by impregnation of PCL acetone solution into dried BC membranes. UV-Vis measurements showed an increase on transparency in BC/PCL membrane when compared with pristine BC. The good transparency of the BC/PCL can be related to the presence of BC nanofibers associated with deposit of PCL nano-sized spherulites which are smaller than the wavelength of visible light and practically free of light scattering. XRD results show that cellulose type I structure is preserved inside the BC/PCL membrane, while the mechanical properties suggested indicated that PCL acts as a plasticizer for the BC membrane. The novel BC/PCL membrane could be used for preparation of fully biocompatible flexible display and biodegradable food packaging.

Nanocomposite PAAm/methyl cellulose/montmorillonite hydrogel: Evidence of synergistic effects for the slow release of fertilizers

In this work, we synthesized a novel series of hydrogels composed of polyacrylamide (PAAm), methylcellulose (MC), and calcic montmorillonite (MMt) appropriate for the controlled release of fertilizers, where the components presented a synergistic effect, giving very high fertilizer loading in their structure. The synthesized hydrogel was characterized in relation to morphological, hydrophilic, spectroscopic, structural, thermal, and kinetic properties. After those characterizations, the application potential was verified through sorption and desorption studies of a nitrogenated fertilizer, urea (CO(NH2)2). The swelling degree results showed that the clay loading considerably reduces the water absorption capability; however, the hydrolysis process favored the urea adsorption in the hydrogel nanocomposites, increasing the load content according to the increase of the clay mass. The FTIR spectra indicated that there was incorporation of the clay with the polymeric matrix of the hydrogel and that incorporation increased the water absorption speed (indicated by the kinetic constant k). By an X-ray diffraction technique, good nanodispersion (intercalation) and exfoliation of the clay platelets in the hydrogel matrix were observed. Furthermore, the presence of the montmorillonite in the hydrogel caused the system to liberate the nutrient in a more controlled manner than that with the neat hydrogel in different pH ranges. In conclusion, excellent results were obtained for the controlled desorption of urea, highlighting the hydrolyzed hydrogels containing 50% calcic montmorillonite. This system presented the best desorption results, releasing larger amounts of nutrient and almost 200 times slower than pure urea, i.e., without hydrogel. The total values of nutrients present in the system show that this material is potentially viable for application in agriculture as a nutrient carrier vehicle. © 2013 American Chemical Society.

Simple green approach to reinforce natural rubber with bacterial cellulose nanofibers

Natural rubber (NR) is a renewable polymer with a wide range of applications, which is constantly tailored, further increasing its utilizations. The tensile strength is one of its most important properties susceptible of being enhanced by the simple incorporation of nanofibers. The preparation and characterization of natural-rubber based nanocomposites reinforced with bacterial cellulose (BC) and bacterial cellulose coated with polystyrene (BCPS), yielded high performance materials. The nanocomposites were prepared by a simple and green process, and characterized by tensile tests, dynamical mechanical analysis (DMA), scanning electron microscopy (SEM), and swelling experiments. The effect of the nanofiber content on morphology, static, and dynamic mechanical properties was also investigated. The results showed an increase in the mechanical properties, such as Young's modulus and tensile strength, even with modest nanofiber loadings. © 2013 American Chemical Society.

Microwave hydrothermal synthesis, characterisation, and catalytic performance of Zn1-xMnxO in cellulose conversion

Wurtzite-type Zn1-xMnxO (x = 0, 0.03, 0.05, 0.07) nanostructures were successfully synthesised using a simple microwave-assisted hydrothermal route and their catalytic properties were investigated in the cellulose conversion. The morphology of the nanocatalysts is dopant-dependent. Pure ZnO presented multi-plate morphology with a flower-like shape of nanometric sizes, while the Zn0.97Mn0.03O sample is formed by nanoplates with the presence of spherical nanoparticles; the Zn0.95Mn0.05O and Zn0.93Mn0.07O samples are mainly formed by nanorods with the presence of a small quantity of spherical nanoparticles. The catalyst without Mn did not show any catalytic activity in the cellulose conversion. The Mn doping promoted an increase in the density of weak acid sites which, according to the catalytic results, favoured promotion of the reaction. © 2013 Institute of Chemistry, Slovak Academy of Sciences.

ZnO nanostructures directly grown on paper and bacterial cellulose substrates without any surface modification layer

In this report, hierarchical ZnO nano- and microstructures were directly grown for the first time on a bacterial cellulose substrate and on two additional different papers by hydrothermal synthesis without any surface modification layer. Compactness and smoothness of the substrates are two important parameters that allow the growth of oriented structures. © 2013 The Royal Society of Chemistry.

Flexible magnetic membranes based on bacterial cellulose and its evaluation as electromagnetic interference shielding material

Flexible magnetic membranes with high proportion of magnetite were successfully prepared by previous impregnation of the never dried bacterial cellulose pellicles with ferric chloride followed by reduction with sodium bisulfite and alkaline treatment for magnetite precipitation. Membranes were characterized by Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), vibrating magnetometer, field emission scanning electron microscopy (FEG-SEM) and impedance spectroscopy. Microwave properties of these membranes were investigated in the X-band (8.2 to 12.4 GHz). FEG-SEM micrographs show an effective coverage of the BC nanofibers by Fe 3O4 nanoparticles. Membranes with up to 75% in weight of particles have been prepared after 60 min of reaction. Magnetite nanoparticles in the form of aggregates well adhered to the BC fibers were observed by SEM. The average crystal sizes of the magnetic particles were in the range of 10 ± 1 to 13 ± 1 nm (estimated by XRD). The magnetic particles in the BC pellicles presented superparamagnetic behavior with a saturation magnetization in the range of 60 emu g- 1 and coercive force around 15 Oe. These magnetic pellicles also displayed high electrical permittivity and a potential application as microwave absorber materials. © 2013 Elsevier B.V.

The forestry and cellulose sector in the Province of Concepción, Chile: Production linkages between the Secano Interior and industry in Greater Concepción, or an enclave economy?

Includes bibliography.

Produção de enzimas ligninolíticas por fungos basidiomicetos por fermentação em estado sólido utilizando resíduos sólidos agroindustriais, visando potencial aplicação na produção animal

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização farmacognóstica, físico-química e microbiológica das folhas de anani (Symphonia globulifera Linn. f., Clusiaceae)

Symphonia globulifera Linn. f., popularmente comumente conhecida como anani, citada em relatos de utilização popular em diferentes países, como Camarões, e em várias regiões do Brasil, principalmente na Amazônia, no tratamento de inflamações na pele, tônico geral e laxante para mulheres grávidas, além de sua seiva/látex ser empregada contra reumatismo e tumores. Embora alguns trabalhos tenham descrito o perfil fitoquímico de S. globulifera, não existem estudos, até o presente, avaliando as propriedades botânicas, químicas (análise térmica) e farmacêutica (spray dryer) desta planta. Assim, foram utilizadas metodologias clássicas contidas em farmacopéias e métodos analíticos mais modernos. Os resultados obtidos para a caracterização botânica são: as células epidérmicas de ambas as faces da folha são heterodimensionais. O complexo estomático é do tipo anomocítico encontrado apenas na face abaxial. O pecíolo apresenta-se plano-convexo revestido por células quadrangulares e espessa cutinização. A caracterização do pó são: a análise granulométrica classifica-o como sendo grosso. Na perda por dessecação foi de 9%; no teor de cinzas totais foi de 4,3%; com a análise térmica foi possível verificar em TG entre 31 a 100°C a primeira perda de massa de 7,8%, em DTA a 64°C um evento endotérmico e em DSC a 84°C um evento endotérmico de 169 J/g; o perfil espectroscópico na região do IV sugere a presença de compostos fenólicos. Enquanto os resultados para a tintura e extrato liofilizado são: densidade aparente de 0,97%g/mL; pH de 6; percentual de resíduo seco de 9%; na prospecção química verificou-se a presença de saponinas, açúcares redutores e fenóis e taninos para o extrato e algumas frações; na análise térmica em TG foi encontrado uma perda de massa de 6,55% entre 28 a 100°C, em DSC somente um evento exotérmico a 169°C; o perfil espectroscópico na região do IV apresentou bandas de absorção forte características de alcoóis e fenóis. No processo de secagem, os excipientes que apresentaram os melhores resultados foram aerosil 40% e celulose microcristalina mais aerosil na proporção de 35:5. O extrato apresentou características antioxidantes. A matéria-prima vegetal também foi ii testada quanto a sua atividade antimicrobiana e antifúngica, fornecendo resultados positivos para algumas cepas testadas e apresentado atividade bactericida para frações acetato de etila e hexânica. O extrato e a fração hexânica apresentaram atividade fungistática,Todos esses resultados contribuem para futuros estudos com essa planta, aumentando assim seu valor agregado.

Bacterial cellulose/triethanolamine based ion-conducting membranes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

New biphasic mono-component composite material obtained by partial oxypropylation of bacterial cellulose

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)