Analysis of the EEG Dynamics of Epileptic Activity in Gelastic Seizures Using Decomposition in Independent Components

Objective: Gelastic seizures are a frequent and well established manifestation of the epilepsy associated with hypothalamic hamartomas. The scalp EEG recordings very seldom demonstrate clear spike activity and the information about the ictal epilepsy dynamics is limited. In this work, we try to isolate epileptic rhythms in gelastic seizures and study their generators. Methods: We extracted rhythmic activity from EEG scalp recordings of gelastic seizures using decomposition in independent components (ICA) in three patients, two with hypothalamic hamartomas and one with no hypothalamic lesion. Time analysis of these rhythms and inverse source analysis was done to recover their foci of origin and temporal dynamics. Results: In the two patients with hypothalamic hamartomas consistent ictal delta (2–3 Hz) rhythms were present, with subcortical generators in both and a superficial one in a single patient. The latter pattern was observed in the patient with no hypothalamic hamartoma visible in MRI. The deep generators activated earlier than the superficial ones, suggesting a consistent sub-cortical origin of the rhythmical activity. Conclusions: Our data is compatible with early and brief epileptic generators in deep sub-cortical regions and more superficial ones activating later. Significance: Gelastic seizures express rhythms on scalp EEG compatible with epileptic activity originating in sub-cortical generators and secondarily involving cortical ones.

Pozzolanic components in lime mortars: correlating behaviour, composition and microstructure.

Int. J. for Restoration of Buildings and Monuments, vol.11, nº 2 (2005), p.111-118

Lean production in the precast concrete components’ industry

Proceedings IGLC-19, July 2011, Lima, Perú

Distributed replicated macro-components

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

The effect of hydraulic components on lime mortars

XXX IAHS World Congress on Housing - Housing Construction: An Interdisciplinary Task, September 9-13, 2002, Coimbra, Portugal

Adsorption equilibria of flue gas components on activated carbon

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Lime mortars with ceramic wastes: characterization of components and their influence on the mechanical behaviour

Considering the fundamental importance of preserving the built heritage and of ensuring the good performance achieved by incorporating ceramic particles in lime mortars in ancient times, it is important to study solutions that use materials the available today, in order to produce mortars intended to repair and replace the old ones. Solutions incorporating industrial ceramic waste might be profitable for several reasons, namely for economic, environmental and technical aspects. In this paper, seven ceramic waste products collected from ceramics factories are characterized. Their mineralogy, dimensional features and pozzolanicity were determined. Three of these products, with different particle size fractions (obtained directly from milling, dust only and fragment fractions only), were selected, incorporated into air lime mortars, and their mechanical strength was determined. In the present work, evidence of mechanical efficiency, when common sand or air lime were partially replaced by ceramic wastes, was made clear, drawing attention to the sustainability of this type of mortars, hence, encouraging further research.

Boosting the suppressive effects of Ascaris suum components in IFN-γ-deficient mice

High molecular weight components from Ascaris suum extract suppress ovalbumin-specific immunity in mice. In IFN-γ-deficient mice, ovalbumin-specific delayed-type hypersensitivity reactions are more strongly downregulated by these suppressive components. Here, the cellularity of the delayed-type hypersensitivity reaction in IFN-γ-deficient mice and the increased downregulation induced by Ascaris suum components were analyzed. IL-12p40-dependent neutrophilic influx was predominant. Suboptimal doses of the suppressive fraction from this nematode completely inhibited the hypersensitivity reaction, thus indicating intensification of the immunosuppression under conditions of intense recruitment of IFN-γ-independent neutrophils.

Adaptação cultural e contributo para a validação da pain attitudes and believes scale for physiotherapists (PABS-PT) para a população de fisioterapeutas portugueses

RESUMO: Introdução: Vários estudos têm encontrado evidência para a relação entre as crenças e atitudes dos profissionais de saúde, a sua abordagem de tratamento, referida como orientada segundo o modelo biomédico ou modelo biopsicossocial (Bishop, 2008; Mutsaers, 2012), e os resultados obtidos. É sugerido que, no tratamento da dor lombar crónica, os profissionais que orientam o seu raciocínio e prática segundo o modelo biomédico, tendem a obter piores resultados quando comparados com os obtidos pelos profissionais que orientam o seu raciocínio e prática segundo uma abordagem biopsicossocial. Esta área de estudo tem salientado a importância de desenhar instrumentos capazes de identificar a orientação preferencial dos profissionais de saúde no tratamento da dor crónica de natureza músculo-esquelética, entre os quais se encontra a “Pain Attitudes and Beliefs Scale for Physiotherapists” (PABS-PT). Objetivo: Adaptar culturalmente a PABS-PT para a população de fisioterapeutas portugueses que intervêm em utentes com dor (lombar) crónica, e contribuir para a sua validação Metodologia: A versão original (língua inglesa) do PABS-PT foi adaptada para a língua e cultura portuguesas, através das etapas definidas nas normas orientadoras estabelecidas para este processo (Beaton et al., 2002; MAPI Institute, 2001). A avaliação das propriedades psicométricas da versão portuguesa foi realizada com recurso a uma amostra de 202 fisioterapeutas e estudantes finalistas do curso de licenciatura em Fisioterapia. Inicialmente foi realizada a análise fatorial exploratória da escala através do método das componentes principais. Posteriormente avaliou-se a consistência interna das componentes obtidas com recurso ao alpha de Cronbach (α). Para analisar a validade de constructo foram correlacionadas as componentes obtidas com a versão portuguesa da “Health Care Providers’ Pain and Impairment Relationship Scale” (HC-PAIRS), recorrendo ao cálculo do coeficiente de Spearman. Resultados: O processo de adaptação cultural não revelou dificuldades importantes sendo considerado que a versão portuguesa da PABS-PT é de fácil compreensão e preenchimento, e os seus itens adequados para avaliar as crenças e atitudes dos fisioterapeutas portugueses relativas à intervenção na dor crónica músculo-esquelética. Os resultados revelaram uma estrutura fatorial de duas componentes, identificadas com as componentes da escala original que explicam 30,96% da variância total. A consistência interna encontrada é boa, para a componente biomédica (α de Cronbach = 0,826), mas muito fraca para a componente biopsicossocial (α de Cronbach= 0,589). Relativamente à validade convergente e discriminativa, foi encontrada uma associação estatisticamente significativa e positiva, entre as componentes 1 (biomédica) da versão nportuguesa da PABS e a HC-PAIRS (Rs = 0,481, p≤ 0,005), e negativa, fraca e significativa entre a pontuação total da componente 2 (biopsicossocial) e a HC-PAIRS (Rs = -0,038, p=0,612). Conclusão: A versão portuguesa do PABS-PT é de fácil compreensão e aparenta ser um instrumento válido para a medição da orientação preferencial dos fisioterapeutas, relativamente às suas atitudes e crenças na avaliação e tratamento de utentes com dor crónica de natureza músculo-esquelética. No entanto, a componente biopsicossocial requer uma análise mais aprofundada para que possa, com rigor, ser utilizada na definição de uma orientação preferencialmente biopsicossocial.--------------ABSTRACT: Introduction: Previous studies have found a relation between the beliefs and attitudes of health professionals, their treatment approach, which can follows a biomedical or a biopsychosocial orientation (Bishop, 2008; Mutsaers, 2012), and the outcomes obtained. Therefore, is suggested that the professionals who tend to approach chronic low back pain patients according to the biomedical model have worse outcomes than professionals who use a biopsychosocial approach in there clinical reasoning. This research field has highlighted the importance of developing measures capable of identifying the preferred orientation of health professionals in the treatment of chronic pain of musculoskeletal nature, including the “Pain Attitudes and Beliefs Scale for Physiotherapists” (PABS-PT). Objective: To cross culturally adapt and validate the PABS-PT for the Portuguese population of physiotherapists. Methodology: The original version (English version) of the PABS-PT was adapted to the Portuguese language and culture, through the guidelines established for these processes (Beaton et al., 2002; MAPI Institute, 2001). The psychometric evaluation of the Portuguese version was carried out on a sample of 202 p physiotherapist and final year students of the physiotherapy course. Initially, an exploratory factorial analysis was performed through the method of the main components. Then, the internal consistence of the main components was evaluated using the Cronbach’s alpha (α). The convergent construct validity was analysed through the correlation between the obtained components of PABS-PT and the Health Care Provider’s Pain and Impairment Relationship Scale (HC-PAIRS), using the Spearmen correlation coefficient. Results: No major difficulties were found during the cultural adaptation process of PABS-PT to Portugal, which means that the Portuguese version is easy to understand and fulfill, and items are appropriated to evaluate the beliefs and attitudes of the Portuguese physiotherapists who treat chronic pain of musculoskeletal origins. The results revealed a factorial structure of two components, as the original scale, explaining 30,96% of the total variance. Internal consistence results were good, for the biomedical component (Cronbach’s α = 0,826), but very weak for the biopsychosocial componente (Cronbach’s α = 0,589). Relatively to convergent and discriminative validity, a statistically significant association was found, between the components 1 (biomedical) of the Portuguese version of PABS-PT and the HC-PAIRS (Rs= 0,481, p≤ 0,005) and negative, weak and significant between the total score of component 2 (biopsychosocial) and the HC-PAIRS (Rs = -0,038, p=0,612). Conclusion: The Portuguese Version of PABS-PT is easy to understand and seems to be a valid instrument to measure the attitudes and beliefs of physiotherapists in the management of patients with chronic low back pain. However, the biopsychosocial component requires a further deep analysis to examine a preferable biopsychosocial orientation.

Analysis of the chemical components of hydatid fluid from Echinococcus granulosus

Introduction The aim of this study was to explore the environment of Echinococcus granulosus (E. granulosus) protoscolices and their relationship with their host. Methods Proteins from the hydatid-cyst fluid (HCF) from E. granulosus were identified by proteomics. An inductively coupled plasma atomic emission spectrometer (ICP-AES) was used to determine the elements, an automatic biochemical analyzer was used to detect the types and levels of biochemical indices, and an automatic amino acid analyzer was used to detect the types and levels of amino acids in the E. granulosus HCF. Results I) Approximately 30 protein spots and 21 peptide mass fingerprints (PMF) were acquired in the two-dimensional gel electrophoresis (2-DE) pattern of hydatid fluid; II) We detected 10 chemical elements in the cyst fluid, including sodium, potassium, calcium, magnesium, copper, and zinc; III) We measured 19 biochemical metabolites in the cyst fluid, and the amount of most of these metabolites was lower than that in normal human serum; IV) We detected 17 free amino acids and measured some of these, including alanine, glycine, and valine. Conclusions We identified and measured many chemical components of the cyst fluid, providing a theoretical basis for developing new drugs to prevent and treat hydatid disease by inhibiting or blocking nutrition, metabolism, and other functions of the pathogen.

Fishing the key biological components of the bacterium Geobacter metallireducens for optimal biotechnological applications

Os resultados apresentados no capítulo 2 foram incluídos no artigo Dantas JM, Campelo LM, Duke NEC, Salgueiro CA, Pokkuluri PR (2015) "The structure of PccH from Geobacter sulfurreducens – a novel low reduction potential monoheme cytochrome essential for accepting electrons from an electrode", FEBS Journal, 282, 2215-2231.

Improving accuracy of inflation forecasts using macroeconomic information

This thesis examines the effects of macroeconomic factors on inflation level and volatility in the Euro Area to improve the accuracy of inflation forecasts with econometric modelling. Inflation aggregates for the EU as well as inflation levels of selected countries are analysed, and the difference between these inflation estimates and forecasts are documented. The research proposes alternative models depending on the focus and the scope of inflation forecasts. I find that models with a Generalized AutoRegressive Conditional Heteroskedasticity (GARCH) in mean process have better explanatory power for inflation variance compared to the regular GARCH models. The significant coefficients are different in EU countries in comparison to the aggregate EU-wide forecast of inflation. The presence of more pronounced GARCH components in certain countries with more stressed economies indicates that inflation volatility in these countries are likely to occur as a result of the stressed economy. In addition, other economies in the Euro Area are found to exhibit a relatively stable variance of inflation over time. Therefore, when analysing EU inflation one have to take into consideration the large differences on country level and focus on those one by one.

Evaluation of the bond performance in FRP-brick components re-bonded after initial delamination

The bond behavior between Fiber Reinforced Polymers (FRPs) and masonry substrates has been the subject of many studies during the last years. Recent accelerated aging tests have shown that bond degradation and FRP delamination are likely to occur in FRP-strengthened masonry components under hygrothermal conditions. While an investigation on the possible methods to improve the durability of these systems is necessary, the applicability of different bond repair methods should also be studied. This paper aims at investigating the debonding mechanisms after repairing delaminated FRP-strengthened masonry components. FRP-strengthened brick specimens, after being delaminated, are repaired with two different adhesives: a conventional epoxy resin and a highly flexible polymer. The latter is used as an innovative adhesive in structural applications. The bond behavior in the repaired specimens is investigated by performing single-lap shear bond tests. Digital image correlation (DIC) is used for deeper investigation of the surface deformation and strains development. The effectiveness of the repair methods is discussed and compared with the strengthened specimens.

Masonry components

Masonry is a non-homogeneous material, composed of units and mortar, which can be of different types, with distinct mechanical properties. The design of both masonry units and mortar is based on the role of the walls in the building. Load-bearing walls relate to structural elements that bear mainly vertical loads, but can serve also to resist to horizontal loads. When a structural masonry building is submitted to in-plane and out-of-plane loadings induced by an earthquake for example, the masonry walls are the structural elements that ensure the global stability of the building. This means that the walls should have adequate mechanical properties that enable them to resist to different combinations of compressive, shear and tensile stresses.The boundary conditions influence the resisting mechanisms of the structural walls under in-plane loading and in a buildings the connection at the intersection walls are of paramount importance for the out-of-plane resisting mechanism. However, it is well established that the masonry mechanical properties are also relevant for the global mechanical performance of the structural masonry walls. Masonry units for load-bearing walls are usually laid so that their perforations are vertically oriented, whereas for partition walls, brick units with horizontal perforation are mostly adopted.

Effects of forest structure components on the occurence, group size and density of groups of bare-face tamarin (Saguinus bicolor - primates: Callitrichinae) in Central Amazonia

This study analyzed the influence of forest structural components on the occurence, size and density of groups of Bare-face Tamarin (Saguinus bicolor) - the most threatened species in the Amazon - and produced the first map of distribution of groups in large-scale spatial within the area of continuous forest. Population censuses were conducted between November 2002 and July 2003, covering 6400 hectares in the Ducke Reserve, Manaus-AM, Brazil. Groups of S. bicolor were recorded 41 times accordingly distributed in the environments: plateau (20); slopes (12); and lowlands (09). The mean group size was 4.8 indiv./group, and ranged from 2 to 11 individuals. In the sites where the groups were recorded, and in an equivalent number of sites where no tamarins were found located at least 500 m from those where they had been recorded, we placed 50 m x 50 m plots to record the following forest structural components: abundance of trees; abundance of lianas; abundance of fruiting trees and lianas; abundance of snags; abundance of logs; percentage of canopy opening; leaf litter depth; and altitude. Bare-face Tamarin more often uses areas with lower abundance of forest logs, smaller canopy opening and with higher abundance of snags, areas in the forest with smaller canopy opening present higher density of S. bicolor groups. Apparently this species does not use the forest in a random way, and may select areas for its daily activities depending on the micro-environmental heterogeneity produced by the forest structural components.