Space-time analysis of the urban-rural grafient in the metropolitan area of Madrid and ist surroundings -Guadalajara and Toledo.

According to UN provisions in the period from 2007 to 2050 world population will grow up to 9200 million people. In fact, for the first time in history, in the year 2008 world urban population became higher than rural population. The increase of urban areas and their transport infrastructures has influenced agricultural land use due to their irreversible change, especially when they remain as periurban vacant land, losing their character and identity. In the Europe of the nineties, the traditional urban-rural gradient, characterized by a neat contact between both land types, has become so complex that it has change to a gradient in which it is difficult to separate urban and rural land uses. [Antrop 2004]. A literature review has been made on methodologies used for the urban-rural gradient analysis. One of these methodologies was selected that integrates ecological characterization based on the use of spatial metrics and geographical characterization based on spatial components. Cartographical sources used were Corine Land Cover at 1: 100000 scale and the Spanish Land Use Information System at 1:25000 scale. Urban-rural gradient paradigm is an analysis methodology, coming from landscape ecology, which enables to investigate how urbanization provokes changes in ecological patterns and processes into landscape. [Hahs and McDonnell 2006].The present research adapt this methodology to study the urban-rural gradient in the outskirts of Madrid, Toledo and Guadalajara. Both scales (1:25000 and 1:100000) were simultaneously used to reach the next objectives: 1) Analysis of landscape pattern dynamics in relation to distance to the town centre and major infrastructures. 2) Analysis of landscape pattern dynamics in the fringe of protected areas. The paper presents a new approach to the urban-rural relationship which allows better planning and management of urban áreas.

Flexible low-cost system to test batteries and ultracapacitors for electric and hybrid vehicles in real working conditions

Batteries and ultracapacitors for hybrid and electric vehicles must satisfy very demanding working conditions that are not usual in other applications. In this sense, specific tests must be performed in order to draw accurate conclusions about their behaviour. To do so, new advanced test benches are needed. These platforms must allow the study of a wide variety of energy storage systems under conditions similar to the real ones. In this paper, a flexible, low-cost and highly customizable system is presented. This system allows batteries and ultracapacitors to be tested in many and varied ways, effectively emulating the working conditions that they face in an electric vehicle. The platform was specifically designed to study energy storage systems for electric and hybrid vehicles, meaning that it is suitable to test different systems in many different working conditions, including real driving cycles. This flexibility is achieved keeping the cost of the platform low, which makes the proposed test bench a feasible alternative for the industry. As an example of the functionality of the platform, a test consisting of a 17-minute ARTEMIS urban cycle with a NiMH battery pack is presented.

Self-Tuning PID controller for autonomous car tracking in urban traffic

In this paper an on line self-tuned PID controller is proposed for the control of a car whose goal is to follow another one, at distances and speeds typical in urban traffic. The bestknown tuning mechanism is perhaps the MIT rule, due to its ease of implementation. However, as it is well known, this method does not guarantee the stability of the system, providing good results only for constant or slowly varying reference signals and in the absence of noise, which are unrealistic conditions. When the reference input varies with an appreciable rate or in presence of noise, eventually it could result in system instability. In this paper an alternative method is proposed that significantly improves the robustness of the system for varying inputs or in the presence of noise, as demonstrated by simulation.

A Propose-and-revise System for Real-time Traffic Management

The aim of this paper is to describe an intelligent system for the problem of real time road traffic control. The purpose of the system is to help traffic engineers in the selection of the state of traffic control devices on real time, using data recorded by traffic detectors on motorways. The system follows an advanced knowledge-based approach that implements an abstract generic problem solving method, called propose-and-revise, which was proposed in Artificial Intelligence, within the knowledge engineering field, as a standard cognitive structure oriented to solve configuration design problems. The paper presents the knowledge model of such a system together with the strategy of inference and describes how it was applied for the case of the M-40 urban ring for the city of Madrid.

Distributed control strategies for photovoltaic systems in urban environments

Este trabajo es una contribución a los sistemas fotovoltaicos (FV) con seguimiento distribuido del punto de máxima potencia (DMPPT), una topología que se caracteriza porque lleva a cabo el MPPT a nivel de módulo, al contrario de las topologías más tradicionales que llevan a cabo el MPPT para un número más elevado de módulos, pudiendo ser hasta cientos de módulos. Las dos tecnologías DMPPT que existen en el mercado son conocidos como microinversores y optimizadores de potencia, y ofrecen ciertas ventajas sobre sistemas de MPPT central como: mayor producción en situaciones de mismatch, monitorización individual de cada módulo, flexibilidad de diseño, mayor seguridad del sistema, etc. Aunque los sistemas DMPPT no están limitados a los entornos urbanos, se ha enfatizado en el título ya que es su mercado natural, siendo difícil una justificación de su sobrecoste en grandes huertas solares en suelo. Desde el año 2010 el mercado de estos sistemas ha incrementado notablemente y sigue creciendo de una forma continuada. Sin embargo, todavía falta un conocimiento profundo de cómo funcionan estos sistemas, especialmente en el caso de los optimizadores de potencia, de las ganancias energéticas esperables en condiciones de mismatch y de las posibilidades avanzadas de diagnóstico de fallos. El principal objetivo de esta tesis es presentar un estudio completo de cómo funcionan los sistemas DMPPT, sus límites y sus ventajas, así como experimentos varios que verifican la teoría y el desarrollo de herramientas para valorar las ventajas de utilizar DMPPT en cada instalación. Las ecuaciones que modelan el funcionamiento de los sistemas FVs con optimizadores de potencia se han desarrollado y utilizado para resaltar los límites de los mismos a la hora de resolver ciertas situaciones de mismatch. Se presenta un estudio profundo sobre el efecto de las sombras en los sistemas FVs: en la curva I-V y en los algoritmos MPPT. Se han llevado a cabo experimentos sobre el funcionamiento de los algoritmos MPPT en situaciones de sombreado, señalando su ineficiencia en estas situaciones. Un análisis de la ventaja del uso de DMPPT frente a los puntos calientes es presentado y verificado. También se presenta un análisis sobre las posibles ganancias en potencia y energía con el uso de DMPPT en condiciones de sombreado y este también es verificado experimentalmente, así como un breve estudio de su viabilidad económica. Para ayudar a llevar a cabo todos los análisis y experimentos descritos previamente se han desarrollado una serie de herramientas software. Una siendo un programa en LabView para controlar un simulador solar y almacenar las medidas. También se ha desarrollado un programa que simula curvas I-V de módulos y generador FVs afectados por sombras y este se ha verificado experimentalmente. Este mismo programa se ha utilizado para desarrollar un programa todavía más completo que estima las pérdidas anuales y las ganancias obtenidas con DMPPT en instalaciones FVs afectadas por sombras. Finalmente, se han desarrollado y verificado unos algoritmos para diagnosticar fallos en sistemas FVs con DMPPT. Esta herramienta puede diagnosticar los siguientes fallos: sombras debido a objetos fijos (con estimación de la distancia al objeto), suciedad localizada, suciedad general, posible punto caliente, degradación de módulos y pérdidas en el cableado de DC. Además, alerta al usuario de las pérdidas producidas por cada fallo y no requiere del uso de sensores de irradiancia y temperatura. ABSTRACT This work is a contribution to photovoltaic (PV) systems with distributed maximum power point tracking (DMPPT), a system topology characterized by performing the MPPT at module level, instead of the more traditional topologies which perform MPPT for a larger number of modules. The two DMPPT technologies available at the moment are known as microinverters and power optimizers, also known as module level power electronics (MLPE), and they provide certain advantages over central MPPT systems like: higher energy production in mismatch situations, monitoring of each individual module, system design flexibility, higher system safety, etc. Although DMPPT is not limited to urban environments, it has been emphasized in the title as it is their natural market, since in large ground-mounted PV plants the extra cost is difficult to justify. Since 2010 MLPE have increased their market share steadily and continuing to grow steadily. However, there still lacks a profound understanding of how they work, especially in the case of power optimizers, the achievable energy gains with their use and the possibilities in failure diagnosis. The main objective of this thesis is to provide a complete understanding of DMPPT technologies: how they function, their limitations and their advantages. A series of equations used to model PV arrays with power optimizers have been derived and used to point out limitations in solving certain mismatch situation. Because one of the most emphasized benefits of DMPPT is their ability to mitigate shading losses, an extensive study on the effects of shadows on PV systems is presented; both on the I-V curve and on MPPT algorithms. Experimental tests have been performed on the MPPT algorithms of central inverters and MLPE, highlighting their inefficiency in I-V curves with local maxima. An analysis of the possible mitigation of hot-spots with DMPPT is discussed and experimentally verified. And a theoretical analysis of the possible power and energy gains is presented as well as experiments in real PV systems. A short economic analysis of the benefits of DMPPT has also been performed. In order to aide in the previous task, a program which simulates I-V curves under shaded conditions has been developed and experimentally verified. This same program has been used to develop a software tool especially designed for PV systems affected by shading, which estimates the losses due to shading and the energy gains obtained with DMPPT. Finally, a set of algorithms for diagnosing system faults in PV systems with DMPPT has been developed and experimentally verified. The tool can diagnose the following failures: fixed object shading (with distance estimation), localized dirt, generalized dirt, possible hot-spots, module degradation and excessive losses in DC cables. In addition, it alerts the user of the power losses produced by each failure and classifies the failures by their severity and it does not require the use of irradiance or temperature sensors.

Distributed control strategies for photovoltaic systems in urban environments : Versión definitiva

Este trabajo es una contribución a los sistemas fotovoltaicos (FV) con seguimiento distribuido del punto de máxima potencia (DMPPT), una topología que se caracteriza porque lleva a cabo el MPPT a nivel de módulo, al contrario de las topologías más tradicionales que llevan a cabo el MPPT para un número más elevado de módulos, pudiendo ser hasta cientos de módulos. Las dos tecnologías DMPPT que existen en el mercado son conocidos como microinversores y optimizadores de potencia, y ofrecen ciertas ventajas sobre sistemas de MPPT central como: mayor producción en situaciones de mismatch, monitorización individual de cada módulo, flexibilidad de diseño, mayor seguridad del sistema, etc. Aunque los sistemas DMPPT no están limitados a los entornos urbanos, se ha enfatizado en el título ya que es su mercado natural, siendo difícil una justificación de su sobrecoste en grandes huertas solares en suelo. Desde el año 2010 el mercado de estos sistemas ha incrementado notablemente y sigue creciendo de una forma continuada. Sin embargo, todavía falta un conocimiento profundo de cómo funcionan estos sistemas, especialmente en el caso de los optimizadores de potencia, de las ganancias energéticas esperables en condiciones de mismatch y de las posibilidades avanzadas de diagnóstico de fallos. El principal objetivo de esta tesis es presentar un estudio completo de cómo funcionan los sistemas DMPPT, sus límites y sus ventajas, así como experimentos varios que verifican la teoría y el desarrollo de herramientas para valorar las ventajas de utilizar DMPPT en cada instalación. Las ecuaciones que modelan el funcionamiento de los sistemas FVs con optimizadores de potencia se han desarrollado y utilizado para resaltar los límites de los mismos a la hora de resolver ciertas situaciones de mismatch. Se presenta un estudio profundo sobre el efecto de las sombras en los sistemas FVs: en la curva I-V y en los algoritmos MPPT. Se han llevado a cabo experimentos sobre el funcionamiento de los algoritmos MPPT en situaciones de sombreado, señalando su ineficiencia en estas situaciones. Un análisis de la ventaja del uso de DMPPT frente a los puntos calientes es presentado y verificado. También se presenta un análisis sobre las posibles ganancias en potencia y energía con el uso de DMPPT en condiciones de sombreado y este también es verificado experimentalmente, así como un breve estudio de su viabilidad económica. Para ayudar a llevar a cabo todos los análisis y experimentos descritos previamente se han desarrollado una serie de herramientas software. Una siendo un programa en LabView para controlar un simulador solar y almacenar las medidas. También se ha desarrollado un programa que simula curvas I-V de módulos y generador FVs afectados por sombras y este se ha verificado experimentalmente. Este mismo programa se ha utilizado para desarrollar un programa todavía más completo que estima las pérdidas anuales y las ganancias obtenidas con DMPPT en instalaciones FVs afectadas por sombras. Finalmente, se han desarrollado y verificado unos algoritmos para diagnosticar fallos en sistemas FVs con DMPPT. Esta herramienta puede diagnosticar los siguientes fallos: sombras debido a objetos fijos (con estimación de la distancia al objeto), suciedad localizada, suciedad general, posible punto caliente, degradación de módulos y pérdidas en el cableado de DC. Además, alerta al usuario de las pérdidas producidas por cada fallo y no requiere del uso de sensores de irradiancia y temperatura. ABSTRACT This work is a contribution to photovoltaic (PV) systems with distributed maximum power point tracking (DMPPT), a system topology characterized by performing the MPPT at module level, instead of the more traditional topologies which perform MPPT for a larger number of modules. The two DMPPT technologies available at the moment are known as microinverters and power optimizers, also known as module level power electronics (MLPE), and they provide certain advantages over central MPPT systems like: higher energy production in mismatch situations, monitoring of each individual module, system design flexibility, higher system safety, etc. Although DMPPT is not limited to urban environments, it has been emphasized in the title as it is their natural market, since in large ground-mounted PV plants the extra cost is difficult to justify. Since 2010 MLPE have increased their market share steadily and continuing to grow steadily. However, there still lacks a profound understanding of how they work, especially in the case of power optimizers, the achievable energy gains with their use and the possibilities in failure diagnosis. The main objective of this thesis is to provide a complete understanding of DMPPT technologies: how they function, their limitations and their advantages. A series of equations used to model PV arrays with power optimizers have been derived and used to point out limitations in solving certain mismatch situation. Because one of the most emphasized benefits of DMPPT is their ability to mitigate shading losses, an extensive study on the effects of shadows on PV systems is presented; both on the I-V curve and on MPPT algorithms. Experimental tests have been performed on the MPPT algorithms of central inverters and MLPE, highlighting their inefficiency in I-V curves with local maxima. An analysis of the possible mitigation of hot-spots with DMPPT is discussed and experimentally verified. And a theoretical analysis of the possible power and energy gains is presented as well as experiments in real PV systems. A short economic analysis of the benefits of DMPPT has also been performed. In order to aide in the previous task, a program which simulates I-V curves under shaded conditions has been developed and experimentally verified. This same program has been used to develop a software tool especially designed for PV systems affected by shading, which estimates the losses due to shading and the energy gains obtained with DMPPT. Finally, a set of algorithms for diagnosing system faults in PV systems with DMPPT has been developed and experimentally verified. The tool can diagnose the following failures: fixed object shading (with distance estimation), localized dirt, generalized dirt, possible hot-spots, module degradation and excessive losses in DC cables. In addition, it alerts the user of the power losses produced by each failure and classifies the failures by their severity and it does not require the use of irradiance or temperature sensors.

Pathways towards the integration of periurban agrarian ecosystems into the spatial planning system

The potential of periurban agrarian ecosystems is recognized as one of the cornerstones for improving urban sustainability; however, this potential has been disregarded in spatial planning and decision making. The main goal of the PAEc-SP project was to assess the feasibility of integrating periurban agricultural areas into spatial planning by developing a viable ecosystem services-based methodology

Development and assessment of traffic-related emission abatement measures for the Madrid city (Spain) through the WRF-SMOKE-CMAQ modelling system

The achievement of the limit values established in the European legislation pose an important handicap for large urban areas with intense road traffic, such as Madrid (Spain). Despite permanent measures included in air quality plans it is important to assess additional measures that may be temporally applied under unfavourable conditions. This paper reports on the simulation of different traffic restriction strategies in Madrid for high-pollution episodes.

Indicadores de sostenibilidad de la gestión integral de las aguas de lluvia en los entornos urbanos : aplicación a la ciudad de Zaragoza

En un contexto de rápido crecimiento de la población urbana y de cambio climático global, la consecución de un modelo de desarrollo sostenible pasa inevitablemente por construir ciudades más sostenibles. Basado en una intensiva impermeabilización de los suelos, el modelo actual de desarrollo urbano modifica profundamente el ciclo natural del agua en las ciudades. La drástica reducción de la capacidad de infiltración del terreno hace que gran parte de la precipitación se transforme en escorrentía superficial, que se concentra rápidamente originando grandes caudales punta. Además, el lavado de las superficies urbanas aporta altas cargas de contaminación a la escorrentía que producen importantes impactos en los medios receptores. Esta realidad motiva la realización de la presente tesis doctoral cuyo objetivo general es contribuir a la consecución de ciudades sostenibles a través de la gestión integral de las aguas de lluvia en los entornos urbanos. Con el objetivo prioritario de minimizar los riesgos de inundación, el enfoque convencional del drenaje urbano desarrolló las primeras soluciones en relación a los caudales punta, centralizando su gestión en el sistema de saneamiento e incorporando la escorrentía al mismo tan rápido como fuera posible. Pero en episodios de lluvias intensas la sobrecarga tanto hidráulica como de contaminación del sistema provoca un incremento de la vulnerabilidad de la población a las inundaciones, una falta de garantía de salud pública y graves impactos sobre los medios receptores. La aprobación en 1987 del CleanWaterAct en Estados Unidos, en el que se reconoció por primera vez el problema de la contaminación aportada por la escorrentía urbana, fue el punto de partida de un nuevo enfoque que promueve un conjunto de técnicas de drenaje que integran aspectos como cantidad de agua, calidad de agua y servicio a la sociedad. Estas técnicas, conocidas como Sistemas de Drenaje Sostenible (SUDS), son consideradas como las técnicas más apropiadas para gestionar los riesgos resultantes de la escorrentía urbana así como para contribuir a la mejora medioambiental de la cuenca y de los ecosistemas receptores. La experiencia internacional apunta a que la efectiva incorporación de los SUDS como sistemas habituales en el desarrollo urbano debe basarse en tres elementos clave: El desarrollo de un marco normativo, la aplicación de instrumentos económicos y la participación ciudadana activa en el proceso. Además se identifica como una de las líneas estratégicas para avanzar en la resolución de la problemática el desarrollo y aplicación de metodologías que apoyen el proceso de toma de decisiones basadas en indicadores cuantificables. Convergiendo con esta línea estratégica la presente tesis doctoral define unos indicadores de sostenibilidad focalizados en una temática no desarrollada hasta el momento, la gestión integral de las aguas de lluvia. Para ello, se aplica el marco analítico Presión-Estado–Respuesta bajo un enfoque que rebasa el sistema de saneamiento, enmarcando la gestión de las aguas de lluvia en las múltiples y complejas interrelaciones del sistema urbano. Así se determinan indicadores de presión, de estado y de respuesta para cada elemento del sistema urbano (Medio Receptor – Cuenca Urbana – Sistema de Saneamiento), definiendo para cada indicador el objetivo específico, la unidad de medición, la tendencia deseada de evolución y la periodicidad de seguimiento recomendada. La validez de la metodología propuesta se comprueba en el estudio de caso de la ciudad de Zaragoza. La determinación de los indicadores permite realizar un diagnóstico y definir unas líneas estratégicas de actuación que contemplan mejoras no sólo en el sistema de saneamiento y drenaje urbano, sino también en el marco normativo, urbanístico, económico, social y ambiental. Finalmente, se concluye que la integración de la gestión de las aguas de lluvia en las políticas de ordenación del territorio, el desarrollo de mecanismos de coordinación institucional, la mejora del marco normativo y la aplicación de instrumentos económicos son elementos clave para la gestión integral de las aguas de lluvia y el consecuente desarrollo de ciudades más sostenibles en España. In a context of rapid urbanization and global climate change, coping with sustainable development challenges requires the development of sustainable cities. Based on an intensive soil permeability reduction, the current development model deeply modifies the natural water cycle in the urban environment. Reduction of soil infiltration capacity turns most of the rainwater into surface runoff, rapidly leading to heavy peak flows which are highly contaminated due to the flushing of the urban surface. This is the central motivation for this thesis, which aspires to contribute to the attainment of more sustainable cities through an integrated management of rainwater in urban environments. With the main objective of minimizing floods, the conventional approach of drainage systems focused on peak flows, centralizing their management on the sewage system and incorporating flows as fast as possible. But during heavy rains the hydraulic and contamination overcharge of the sewage system leads to an increase in the vulnerability of the population, in regards to floods and lack of public health, as well as to severe impacts in receiving waters. In 1987, the United States’Clean Water Act Declaration, which firstly recognized the problem of runoff contamination, was the starting point of a new approach that promotes a set of techniques known as Sustainable Drainage Systems (SUDS)that integrates issues such as quantity of water, quality of water and service to society. SUDS are considered the most suitable set of techniques to manage the risks resulting from urban runoff, as well as to contribute to the environmental enhancement of urban basins and of the aquatic ecosystems. International experience points out that the effective adoption of SUDS as usual systems in urban development must be based on three key elements: The enhancement of the legal frame, the application of economic tools and the active public participation throughout the process. Additionally, one of the strategic actions to advance in the resolution of the problem is the development and application of methodologies based in measurable indicators that support the decision making process. In that line, this thesis defines a set of sustainability indicators focused in integrated management of rainwater. To that end, the present document applies the analytical frame Pressure – State – Response under an approach that goes beyond the sewage system and considers the multiple and complex interrelations within urban systems. Thus, for the three basic elements that interact in the issue (Receiving Water Bodies – Urban Basin – Sewage System) a set of Pressure – State – Response indicators are proposed, and the specific aim, the measurement unit, the desired evolution trend and the regularity of monitoring are defined for each of the indicators. The application of the proposed indicators to the case study of the city of Zaragoza acknowledged their suitability for the definition of lines of action that encompass not only the enhancement of the performance of sewage and drainage systems during rain events, but also the legal, urban, economic, social and environmental framework. Finally, this thesis concludes that the inclusion of urban rainwater management issues in the definition of regional planning policies, the development of mechanisms to attain an effective institutional coordination, the enhancement of the legal framework and the application of economic tools are key elements in order to achieve an integrated rainwater management and the subsequent sustainability of urban development in Spain.

The citizens' urban extitutional processes in Madrid

Talking about participation is always taking into account economics, capitals and resources. Who can participate? How citizens can afford time and space resources to participate? We don¿t like to speak about participation rather than collective processes of empowerment. Connecting the personal and the social, a different analysis of the relations between the public sphere and the domestic space is needed. There is an emergent new collective realm based on networks opening and distributing domestic practices within the city. These processes are developed as extitucional informal processes around the house, revealing other forms of urban and citizen assemblages in Madrid. Studies on the urban citizen organization have not developed a system to explain the different modes and processes as a movement-rhizome formed around the housing. It is the purpose of this research to explain and track how they are formed, how they operate in the city, how the action enables trading and how other non econonomical capitals are at stake in this process. The article investigates the different modes in which the creation of citizen networks not come only from public space and squares but also from finantial negociations, banks, housing and bodies. House is not any more an individual, particular and intimate space. That is the main teaching that the Mortage citizens¿ platform show us in Madrid. The empowerment citizen initiative PaH and all the citizen initiatives around the access to housing perform another urbanism as an extitutional process. Madrid is also today a collective laboratory around the house.

Don’t Let Me Down: An Autoethnography of an Urban Teacher

Students in urban schools who are negatively impacted need stability and continuity the most. However, at least half of new teachers leave their profession within five years. In order for this situation to change, support is needed for new teachers and encouragement is needed for experienced teachers. The purpose of the study is to offer a first-hand description of factors that affect the profession of teaching and especially teachers who may be wondering how to stay in teaching for more than five years. Veteran teachers gain the opportunity to reflect, validate, and (probably) celebrate their own journey through this profession. This autoethnography uses my experience of a 29-year veteran teacher, who started with an alternative teaching license, to mirror what researchers have identified as key factors for sustainability and how they affected my continued commitment to teaching in urban schools. The following questions framed the study: 1. Why did I choose teaching as a career? 2. What supportive factors contributed to my decision to continue teaching in an urban school rather than leave the profession? 3. What internal and external struggles have I encountered in teaching and what strategies did I use to overcome them? 4. What beliefs and experiences led to my steadfast commitment to teaching in an urban setting? 5. How do I define success as an urban teacher? 6. What are the implications of my story for urban education? This autoethnography involves data collection and in-depth analysis of documents and artifacts that were generated during my teaching career as an urban educator. These documents and artifacts come from both internal and external sources. The study’s implications reach beyond teachers and include two sub-groups: teacher education programs and school administrators. The implication for teachers is the importance of a two-fold support system in order to thrive: first teachers need spiritual support and second they need to surround themselves with likeminded teachers. The implications for teacher education programs include making pre-service teachers aware of the realities of urban settings and provide them with resources, which could help overcome the attrition rate. Additionally, pre-service teachers need to know how to form credible relationships with their students. This study also reveals the important role that school principals play in the success of their teachers. First, principals are responsible for creating a positive school climate that promotes a professional learning community. Second, they need to establish relational trust in their building. Third, they need to nourish their staff both physically and emotionally. Finally, the implications of autoethnography for teachers and researchers are also discussed.

Trends in socioeconomic inequalities in amenable mortality in urban areas of Spanish cities, 1996-2007

Background: While research continues into indicators such as preventable and amenable mortality in order to evaluate quality, access, and equity in the healthcare, it is also necessary to continue identifying the areas of greatest risk owing to these causes of death in urban areas of large cities, where a large part of the population is concentrated, in order to carry out specific actions and reduce inequalities in mortality. This study describes inequalities in amenable mortality in relation to socioeconomic status in small urban areas, and analyses their evolution over the course of the periods 1996–99, 2000–2003 and 2004–2007 in three major cities in the Spanish Mediterranean coast (Alicante, Castellón, and Valencia). Methods: All deaths attributed to amenable causes were analysed among non-institutionalised residents in the three cities studied over the course of the study periods. Census tracts for the cities were grouped into 3 socioeconomic status levels, from higher to lower levels of deprivation, using 5 indicators obtained from the 2001 Spanish Population Census. For each city, the relative risks of death were estimated between socioeconomic status levels using Poisson’s Regression models, adjusted for age and study period, and distinguishing between genders. Results: Amenable mortality contributes significantly to general mortality (around 10%, higher among men), having decreased over time in the three cities studied for men and women. In the three cities studied, with a high degree of consistency, it has been seen that the risks of mortality are greater in areas of higher deprivation, and that these excesses have not significantly modified over time. Conclusions: Although amenable mortality decreases over the time period studied, the socioeconomic inequalities observed are maintained in the three cities. Areas have been identified that display excesses in amenable mortality, potentially attributable to differences in the healthcare system, associated with areas of greater deprivation. Action must be taken in these areas of greater inequality in order to reduce the health inequalities detected. The causes behind socioeconomic inequalities in amenable mortality must be studied in depth.

South America, 1807 (Image 2 of 7) (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Colombia Prima or South America : in which it has been attempted to delineate the extent of our knowledge of that continent, extracted chiefly from the original manuscript maps of ... Pinto, likewise fom those of João Joaquin da Rocha, João da Costa Ferreira ... Francisco Manuel Sobreviela &c. and from the most authentic edited accounts of those countries, digested & constructed by ... Louis Stanislas D'Arcy Delarochette. It was published by William Faden geographer to His Majesty and to His Royal Highness the Prince of Wales in June 4th, 1807. Scale [ca. 1:3,000,000]. This layer is image 2 of 7 total images of the eight sheet map, representing the northern portion of the map.The image inside the map neatline is georeferenced to the surface of the earth and fit to the South America Lambert Conformal Conic projected coordinate system. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as drainage, cities and other human settlements, roads, territorial boundaries, shoreline features, mines, tribes, and more. Relief shown by hachures. Includes notes.This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.

South America, 1807 (Image 3 of 7) (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Colombia Prima or South America : in which it has been attempted to delineate the extent of our knowledge of that continent, extracted chiefly from the original manuscript maps of ... Pinto, likewise fom those of João Joaquin da Rocha, João da Costa Ferreira ... Francisco Manuel Sobreviela &c. and from the most authentic edited accounts of those countries, digested & constructed by ... Louis Stanislas D'Arcy Delarochette. It was published by William Faden geographer to His Majesty and to His Royal Highness the Prince of Wales in June 4th, 1807. Scale [ca. 1:3,000,000]. This layer is image 3 of 7 total images of the eight sheet map, representing the eastern portion of the map.The image inside the map neatline is georeferenced to the surface of the earth and fit to the South America Lambert Conformal Conic projected coordinate system. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as drainage, cities and other human settlements, roads, territorial boundaries, shoreline features, mines, tribes, and more. Relief shown by hachures. Includes notes.This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.

South America, 1807 (Image 4 of 7) (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Colombia Prima or South America : in which it has been attempted to delineate the extent of our knowledge of that continent, extracted chiefly from the original manuscript maps of ... Pinto, likewise fom those of João Joaquin da Rocha, João da Costa Ferreira ... Francisco Manuel Sobreviela &c. and from the most authentic edited accounts of those countries, digested & constructed by ... Louis Stanislas D'Arcy Delarochette. It was published by William Faden geographer to His Majesty and to His Royal Highness the Prince of Wales in June 4th, 1807. Scale [ca. 1:3,000,000]. This layer is image 4 of 7 total images of the eight sheet map, representing the northeast portion of the map.The image inside the map neatline is georeferenced to the surface of the earth and fit to the South America Lambert Conformal Conic projected coordinate system. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as drainage, cities and other human settlements, roads, territorial boundaries, shoreline features, mines, tribes, and more. Relief shown by hachures. Includes notes.This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.