Process development on the monolithic fabrication of an ultra-compact 4×4 optical switch matrix on InP/InGaAsP material

We have fabricated an ultra-compact 4×4 optical matrix on InP/InGaAsP material. 1×4 MMI couplers and TIR mirrors are employed to produce a compact 1×2 mm2 device. A CH4/H2/O2 RIE dry etch process has been used to realize two-level dry etching: deep-etch for both the MMI couplers and the mirrors and shallow-etch for the rest of the routing waveguides. It was found that a metal/dielectric bilayer mask is essential for multi-dry-etch processes and high profile verticality. We have found a Ti intermediate mask for the deep-etch process which is removable by SF6 dry-etch before the following shallow process. Dry-etch removal of the intermediate mask is necessary to protect the deep-etched mirror sidewall.

Nanostructured carbon films from supersonic cluster beam deposition: Structure and morphology

Nanostructured carbon thin films have been grown by deposition of cluster beams produced by a supersonic expansion. Due to separation effects typical of supersonic beams, films with different nanostructures can be grown by the simple intercepting of different regions of the cluster beam with a substrate. Films show a low-density porous structure, which has been characterized by Raman and Brillouin spectroscopy. Film morphology suggests that growth processes are similar to those occurring in a ballistic deposition regime.

Effect of size, morphology and crystallinity of seed crystal on the nucleation and growth of single grain Y-Ba-Cu-O

The effect of size, morphology and crystallinity of seed crystals on the nucleation and growth of large grain Y-Ba-Cu-O (YBCO) bulk superconductors fabricated by top seeded melt growth (TSMG) has been investigated. Seeding bulk samples with small, square shaped seed crystals leads to point nucleation and growth of the superconducting YBa2Cu3O7-y (Y-123) phase that exhibits the usual square habitual growth symmetry. The use of triangular and circular shaped seed crystals, however, modifies significantly the growth habit geometry of the grain. The use of large area seeds both increases the rate of epitaxial nucleation of the Y-123 phase and produces relatively large crystals in the incongruent melt, which decreases significantly the processing times of large grain samples. The present study is relevant to decrease processing times of samples with both preferred or no growth sectors and for multiple seeding of large grain samples which contain clean grain boundaries. © 2005 Published by Elsevier Ltd.

SOI diode temperature sensor operated at ultra high temperatures-a critical analysis

This paper investigates the performance of diode temperature sensors when operated at ultra high temperatures (above 250°C). A low leakage Silicon On Insulator (SOI) diode was designed and fabricated in a 1 μm CMOS process and suspended within a dielectric membrane for efficient thermal insulation. The diode can be used for accurate temperature monitoring in a variety of sensors such as microcalorimeters, IR detectors, or thermal flow sensors. A CMOS compatible micro-heater was integrated with the diode for local heating. It was found that the diode forward voltage exhibited a linear dependence on temperature as long as the reverse saturation current remained below the forward driving current. We have proven experimentally that the maximum temperature can be as high as 550°C. Long term continuous operation at high temperatures (400°C) showed good stability of the voltage drop. Furthermore, we carried out a detailed theoretical analysis to determine the maximum operating temperature and exlain the presence of nonlinearity factors at ultra high temperatures. © 2008 IEEE.

Cytogenetics, morphology and evolution of four subspecies of the Giant Sheep argali (Ovis ammon) of Asia

Dalai-lamae (Ovis ammon dalai-lamae), Gobi (O. a. darwini), Kara Tau (O. a. nigrimontana) and Tibetan (O. a. hodgsoni) argali share a 2n = 56 diploid chromosome number and a karyotype consisting of 2 pairs of biarmed and 25 pairs of acrocentric autosomes, a large acrocentric X and a minute Y chromosome. The Giemsa-banding patterns of the largest pair of biarmed chromosomes were identical to those of the largest biarmed chromosomes in all wild sheep and domestic sheep of the genus Ovis. The banding patterns of the second pair of biarmed chromosomes (metacentric) were identical to the third pair of biarmed chromosomes in Ovis with 2n = 54 and to the third largest pair of chromosomes in the 2n = 52 karyotype of Siberian snow sheep (O. nivicola). The G-banded karyotypes of dalai-lamae, darwini, hodgsoni and nigrimontana are consistent with all subspecies of argali (O. ammon), except that the Y chromosome is acrocentric instead of metacentric as typical of the argaliform wild sheep and Ovis. The Dalai-lamae and Tibetan argali specimens exhibit the light-colored, long-haired ruffs and body coloration typical of argalis from the Tibetan Plateau. The Gobi argali, from the extreme western Gobi, is similar to the dark phase argali.

Studies on geo-morphology, ecology and fish production of the 92 rivers of Rajshahi Division, Bangladesh

Geo-morphology, ecology and fish production of the 92 rivers of Rajshahi division have been presented in this paper. Fifteen rivers are dead and 11 rivers have severe erosion problem. Siltation has increased in 66 rivers and depth has decreased in 11 rivers. Sixty nine rivers are suffering from low flow conditions. Fish diversity has decreased in 20 rivers while fish production has declined in 75 rivers. A total of 31 fish species have extinct, 25 species are under threat of extinction and 43 species have low production. Siltation and pollution are the major causes of fish habitat loss. Recommendations are made to protect and conserve fish habitat and riverine fisheries of Rajshahi division.

Effects of gelatin on mechanical properties of hydroxyapatite-gelatin nano-composltes

A biomimetic reactor has been developed to synthesize hydroxyapatite- gelatin (HAP-GEL) nanocomposites that mimic ultra-structures of natural bone. We hypothesize that in the reactor, gelatin concentration controls morphology and packing structures of HAP crystals. To test the hypothesis, three types of mechanical tests were conducted, including nanoindentation, compression, and fracture tests. Nanoindentation tests in conjunction with computer modeling were used to assess effects on gelatin-induced microstructures of HAP. The results showed that increasing gelatin content increased both the plane strain modulus and the fracture toughness. The gelatin appeared to shorten the HAP crystal distance, which consolidated the internal structure of the composite and made the material more rigid. The fracture toughness KIC increased partially due to the effect of fiber bridging between gelatin molecules. The highest fracture toughness (1.12 MPa·1/2) was equivalent to that of pure hydroxyapatite. The compressive strength of the HAP-GEL (107.7±26.8 MPa) was, however, less sensitive to microstructural changes and was within the range of natural cortical bone (human 170 MPa, pig: 100 MPa). The compression strength was dominated by void inclusions while the nanoindentation response reflected ultra-structural arrangement of the crystals. The gelatin concentration is likely to modify crystal arrangement as demonstrated in TEM experiments but not void distribution at macroscopic levels. © 2006 Materials Research Society.

Studies on the egg quality of Penaeus monodon Fabricius based on morphology and hatching rates

Eggs of P. monodon are classified into 5 different types on the basis of morphological criteria and hatching rates: A sub(1) eggs, which undergo normal development with 58% hatching rate; A sub(2) eggs, which show delayed and/or abnormal development with 32% hatching rate; B eggs, which are unfertilized and characterized by irregular cytoplasmic formation; C eggs, which are unfertilized and show no change in appearance; and D eggs, which are unfertilized and show extensive bacterial presence. The establishment of a highly linear relationship between percent A sub(1) eggs and hatching rate provides a useful tool to aid the hatchery technician in determining which spawnings to reject outright and which to rear through the larval and post-larval stages.