Sistema especialista para análise pós-evento da proteção em subestações distribuidoras.

É importante que as redes elétricas tenham altos índices de confiabilidade, de forma a se manter a agilidade e a manutenção ideais para um melhor funcionamento. Por outro lado, o crescimento inesperado da carga, falhas em equipamentos e uma parametrização inadequada das funções de proteção tornam a análise de eventos de proteção mais complexas e demoradas. Além disso, a quantidade de informações que pode ser obtida de relés digitais modernos tem crescido constantemente. Para que seja possível uma rápida tomada de decisão e manutenção, esse projeto de pesquisa teve como objetivo a implementação de um sistema completo de diagnóstico que é ativado automaticamente quando um evento de proteção ocorrer. As informações a serem analisadas são obtidas de uma base de dados e de relés de proteção, via protocolo de comunicação IEC 61850 e arquivos de oscilografia. O trabalho aborda o sistema Smart Grid completo incluindo: a aquisição de dados nos relés, detalhando o sistema de comunicação desenvolvido através de um software com um cliente IEC61850 e um servidor OPC e um software com um cliente OPC, que é ativado por eventos configurados para dispará-lo (por exemplo, atuação da proteção); o sistema de pré-tratamento de dados, onde os dados provenientes dos relés e equipamentos de proteção são filtrados, pré-processados e formatados; e o sistema de diagnóstico. Um banco de dados central mantém atualizados os dados de todas essas etapas. O sistema de diagnóstico utiliza algoritmos convencionais e técnicas de inteligência artificial, em particular, um sistema especialista. O sistema especialista foi desenvolvido para lidar com diferentes conjuntos de dados de entrada e com uma possível falta de dados, sempre garantindo a entrega de diagnósticos. Foram realizados testes e simulações para curtos-circuitos (trifásico, dupla-fase, dupla-fase-terra e fase-terra) em alimentadores, transformadores e barras de uma subestação. Esses testes incluíram diferentes estados do sistema de proteção (funcionamento correto e impróprio). O sistema se mostrou totalmente eficaz tanto no caso de disponibilidade completa quanto parcial de informações, sempre fornecendo um diagnóstico do curto-circuito e analisando o funcionamento das funções de proteção da subestação. Dessa forma, possibilita-se uma manutenção muito mais eficiente pelas concessionárias de energia, principalmente no que diz respeito à prevenção de defeitos em equipamentos, rápida resposta a problemas, e necessidade de reparametrização das funções de proteção. O sistema foi instalado com sucesso em uma subestação de distribuição da Companhia Paulista de Força e Luz.

Composite evaluation report for occupational education in the State of Illinois.

Description based on: Fiscal year 1977; title from cover.

Commodification of Black Bodies: Convict Leasing and Prison Privatization in the United States of America

The United States is home to a private prison industry, which allows for the detention of human beings to be transformed into a multi-billion dollar industry. This paper traces the parallels between the post-civil war convict leasing system and the current system of prison privatization, which encourages the commodification of black bodies in order to maintain a racial hierarchy. It analyzes the incompatibility of prison privatization with the US Constitution. Private prisons, which hold African American men at a higher rate that state-run prisons, take cost-cutting measures in order to increase profit, which expose prisoners to higher rates of abuse and increased recidivism rates. Private prisons have significant political power to determine crime control legislation, which has led to harsh laws which increase the number of men of color behind bars. This paper provides a three-phase plan for abolishing private prisons and reducing overall incarceration rates in the United States.

Time-series Luminance Distribution Maps: implementation of annual daylight simulation methods for occupant visual comfort analysis

Thesis (Master's)--University of Washington, 2016-06

Experimental manipulation of prior experience: Effects on item and associative recognition

Frequency of exposure to very low- and high-frequency words was manipulated in a three-phase (familiarisation, study, and test) design. During familiarisation, words were presented with their definition (once, four times, or not presented). One week (Experiment 1) or one day (Experiment 2) later, participants studied a list of homogeneous pairs (i.e., pair members were matched on background and familiarisation frequency). Item and associative recognition of high- and very low-frequency words presented in intact, rearranged, old-new, or new-new pairs were tested in Experiment 1. Associative recognition of very low-frequency words was tested in Experiment 2. Results showed that prior familiaris ation improved associative recognition of very low-frequency pairs, but had no effect on high-frequency pairs. The role of meaning in the formation of item-to-item and item-to-context associations and the implications for current models of memory are discussed.

Effect of particle hydrophobicity on particle and water transport across a flotation froth

Froth recovery measurements have been conducted in both the presence (three-phase froth) and absence (two-phase froth) of particles of different contact angles in a specially modified laboratory flotation column. Increasing the particle hydrophobicity increased the flow rate of particles entering the froth, while the recovery of particles across the froth phase itself also increased for particle contact angles to 63 and at all vertical heights of the froth column. However, a further increase in the contact angle to 69 resulted in lower particle recovery across the froth phase. The reduced froth recovery for particles of 69 contact angle was linked to significant bubble coalescence within the froth phase. The reduced froth recovery occurred uniformly across the entire particle size range, and was, presumably, a result of particle detachment from coalescing bubbles. Water flow rates across the froth phase also varied with particle contact angle. The general trend was a decrease in the concentrate flow rate of water with increasing particle contact angle. An inverse relationship between water flow rate and bubble radius was also observed, possibly allowing prediction of water flow rate from bubble size measurements in the froth. Comparison of the froth structure, defined by bubble size, gas hold-up and bubble layer thickness, for two- and three-phase froths, at the same frother concentration, showed there was a relationship between water flow rate and froth structure. (c) 2005 Elsevier B.V. All rights reserved.

Grammatical sensitivity: Its origins and potential contribution to early word reading skill

A three-phase longitudinal study examined the origins of grammatical sensitivity and its usefulness as a predictor of early word-level reading. At about 4 years of age, children were given a range of language and cognitive tests. One year later, the children were given a further series of language and cognitive tests, this time including grammatical sensitivity, phonological sensitivity, and nonword repetition. Another year later, word-level reading achievement was assessed. Overall, grammatical sensitivity and phonological sensitivity were more firmly grounded in earlier language ability than in cognitive ability. Phonological sensitivity and nonword repetition showed reliable predictive associations with subsequent word reading skills. Grammatical sensitivity did not. (c) 2005 Elsevier Inc. All rights reserved.

An exploration of the needs and goals of the health professional and patient in a medical consultation

This Study is the first phase of a three-phase study continuing over three years. Twent)' health professionals from different disciplinary backgrounds (medical doctors, nurses, allied health professionals) and 20 patients across a range of medical condidons, education, gender, and socio-economic backgrounds, pardcipated in one-on-one semi-structured interviews. Participants described their experiences and percepdons of both effecdve and sadsfying medical consultations and dissadsf)'ing and ineffecdve ones. They also discussed their individual goals and needs in the consultation process. Results indicated that while there were some similarides in consultation goals and needs between health professionals, there were also clear differences across the different discipUnes. In addition, there were clear differences in goals and needs across the twenty padents. These findings are discussed within the framework of communicadon accommodadon theor}' (CAT) and the linguisdc model of padent pardcipadon (LMOPP) and focus on understanding the different dynamics that underpin varying health professional and padent interacdons.

GESTÃO DA COMUNICAÇÃO INTEGRADA: CONTRIBUIÇÕES PARA UMA ABORDAGEM SISTÊMICA Um estudo de caso da rede Magazine Luiza

O estudo investiga os fluxos de comunicação nas organizações, refletindo sobre o modelo dos 3 Puts (inputs, throughputs, outputs), que propicia uma visão sistêmica interdepartamental, aumentando a interação e a consciência entre os setores para a realização dos objetivos organizacionais. Apresenta as características e intersecções entre comunicação mercadológica, comunicação institucional e comunicação administrativa. Oferece um ponto de encontro entre esses conceitos e reflete sobre o modelo de Comunicação Integrada Tridimensional, quando todas as ações da comunicação organizacional convergem, baseadas no trinômio Missão, Visão e Valores e nos 14 passos da comunicação de Yanaze (2013). Outra análise é verificar os pressupostos teóricos com um estudo de caso da empresa Magazine Luiza, a fim de verificar de que forma o conceito de comunicação integrada está fundamentado no planejamento e na unicidade da mensagem desta organização. A metodologia consistiu em pesquisa bibliográfica, estudo de caso e aplicação de entrevistas. Entre os resultados encontrados, demonstrou-se, tanto na pesquisa teórica quanto empírica, que a abordagem sistêmica e a proposta de Comunicação 3D, de fato, oferecem caminhos para uma eficaz gestão da comunicação integrada.

Purification of phosphoric acid by solvent extraction

This work follows a feasibility study (187) which suggested that a process for purifying wet-process phosphoric acid by solvent extraction should be economically viable. The work was divided into two main areas, (i) chemical and physical measurements on the three-phase system, with or without impurities; (ii) process simulation and optimization. The object was to test the process technically and economically and to optimise the type of solvent. The chemical equilibria and distribution curves for the system water - phosphoric acid - solvent for the solvents n-amyl alcohol, tri-n-butyl phosphate, di-isopropyl ether and methyl isobutyl ketone have been determined. Both pure phosphoric acid and acid containing known amounts of naturally occurring impurities (Fe P0 4 , A1P0 4 , Ca3(P04)Z and Mg 3(P0 4 )Z) were examined. The hydrodynamic characteristics of the systems were also studied. The experimental results obtained for drop size distribution were compared with those obtainable from Hinze's equation (32) and it was found that they deviated by an amount related to the turbulence. A comprehensive literature survey on the purification of wet-process phosphoric acid by organic solvents has been made. The literature regarding solvent extraction fundamentals and equipment and optimization methods for the envisaged process was also reviewed. A modified form of the Kremser-Brown and Souders equation to calculate the number of contact stages was derived. The modification takes into account the special nature of phosphoric acid distribution curves in the studied systems. The process flow-sheet was developed and simulated. Powell's direct search optimization method was selected in conjunction with the linear search algorithm of Davies, Swann and Campey. The objective function was defined as the total annual manufacturing cost and the program was employed to find the optimum operating conditions for anyone of the chosen solvents. The final results demonstrated the following order of feasibility to purify wet-process acid: di-isopropyl ether, methylisobutyl ketone, n-amyl alcohol and tri-n-butyl phosphate.

Managing the quality, value and impact of academic libraries: the role of external standards

Purpose – The purpose of this paper is to explore the role and relevance of external standards in demonstrating the value and impact of academic library services to their stakeholders. Design/methodology/approach – Two UK standards, Charter Mark and Customer Service Excellence, are evaluated via an exploratory case study, employing multiple data collection techniques. Methods and results of phases 1-2 of a three phase research project are outlined. Findings – Despite some limitations, standards may assist the manager in demonstrating the value, impact and quality of academic libraries in a recessional environment. Active engagement and partnership with customers is imperative if academic libraries are to be viewed as vital to their parent organisations and thus survive. Originality/value – This paper provides a systematic evaluation of the role of external accreditation standards in measuring academic library service value and impact.

Upgrading fast pyrolysis liquids:blends of biodiesel and pyrolysis oil

Fast pyrolysis liquid or bio-oil has been used in engines with limited success. It requires a pilot fuel and/or an additive for successful combustion and there are problems with materials and liquid properties. It is immiscible with all conventional hydrocarbon fuels. Biodiesel, a product of esterification of vegetable oil with an alcohol, is widely used as a renewable liquid fuel as an additive to diesel at up to 20%. There are however limits to its use in conventional engines due to poor low temperature performance and variability in quality from a variety of vegetable oil qualities and variety of esterification processes. Within the European Project Bioliquids-CHP - a joint project between the European Commission and Russia - a study was undertaken to develop small scale CHP units based on engines and microturbines fuelled with bioliquids from fast pyrolysis and methyl esters of vegetable oil. Blends of bio-oil and biodiesel were evaluated and tested to overcome some of the disadvantages of using either fuel by itself. An alcohol was used as the co-solvent in the form of ethanol, 1-butanol or 2-propanol. Visual inspection of the blend homogeneity after 48 h was used as an indicator of the product stability and the results were plotted in a three phase chart for each alcohol used. An accelerated stability test was performed on selected samples in order to predict its long term stability. We concluded that the type and quantity of alcohol is critical for the blend formation and stability. Using 1-butanol gave the widest selection of stable blends, followed by blends with 2-propanol and finally ethanol, thus 1-butanol blends accepted the largest proportion of bio-oil in the mixture. © 2013 Elsevier Ltd. All rights reserved.

Modelling of induction motors for system faults and transient stability studies

The research carried out in this thesis was mainly concerned with the effects of large induction motors and their transient performance in power systems. Computer packages using the three phase co-ordinate frame of reference were developed to simulate the induction motor transient performance. A technique using matrix algebra was developed to allow extension of the three phase co-ordinate method to analyse asymmetrical and symmetrical faults on both sides of the three phase delta-star transformer which is usually required when connecting large induction motors to the supply system. System simulation, applying these two techniques, was used to study the transient stability of a power system. The response of a typical system, loaded with a group of large induction motors, two three-phase delta-star transformers, a synchronous generator and an infinite system was analysed. The computer software developed to study this system has the advantage that different types of fault at different locations can be studied by simple changes in input data. The research also involved investigating the possibility of using different integrating routines such as Runge-Kutta-Gill, RungeKutta-Fehlberg and the Predictor-Corrector methods. The investigation enables the reduction of computation time, which is necessary when solving the induction motor equations expressed in terms of the three phase variables. The outcome of this investigation was utilised in analysing an introductory model (containing only minimal control action) of an isolated system having a significant induction motor load compared to the size of the generator energising the system.

A study of magnetic non-linearity and finite length effects in solid iron subjected to a travelling MMF wave

This thesis describes an experimental and analytic study of the effects of magnetic non-linearity and finite length on the loss and field distribution in solid iron due to a travelling mmf wave. In the first half of the thesis, a two-dimensional solution is developed which accounts for the effects of both magnetic non-linearity and eddy-current reaction; this solution is extended, in the second half, to a three-dimensional model. In the two-dimensional solution, new equations for loss and flux/pole are given; these equations contain the primary excitation, the machine parameters and factors describing the shape of the normal B-H curve. The solution applies to machines of any air-gap length. The conditions for maximum loss are defined, and generalised torque/frequency curves are obtained. A relationship between the peripheral component of magnetic field on the surface of the iron and the primary excitation is given. The effects of magnetic non-linearity and finite length are combined analytically by introducing an equivalent constant permeability into a linear three-dimensional analysis. The equivalent constant permeability is defined from the non-linear solution for the two-dimensional magnetic field at the axial centre of the machine to avoid iterative solutions. In the linear three-dimensional analysis, the primary excitation in the passive end-regions of the machine is set equal to zero and the secondary end faces are developed onto the air-gap surface. The analyses, and the assumptions on which they are based, were verified on an experimental machine which consists of a three-phase rotor and alternative solid iron stators, one with copper end rings, and one without copper end rings j the main dimensions of the two stators are identical. Measurements of torque, flux /pole, surface current density and radial power flow were obtained for both stators over a range of frequencies and excitations. Comparison of the measurements on the two stators enabled the individual effects of finite length and saturation to be identified, and the definition of constant equivalent permeability to be verified. The penetration of the peripheral flux into the stator with copper end rings was measured and compared with theoretical penetration curves. Agreement between measured and theoretical results was generally good.

A CFD approach on the effect of particle size on char entrainment in bubbling fluidised bed reactors

The fluid – particle interaction inside a 41.7 mg s-1 fluidised bed reactor is modelled. Three char particles of sizes 500 µm, 250 µm, and 100 µm are injected into the fluidised bed and the momentum transport from the fluidising gas and fluidised sand is modelled. Due to the fluidising conditions and reactor design the char particles will either be entrained from the reactor or remain inside the bubbling bed. The particle size is the factor that differentiates the particle motion inside the reactor and their efficient entrainment out of it. A 3-Dimensional simulation has been performed with a completele revised momentum transport model for bubble three-phase flow according to the literature as an extension to the commercial finite volume code FLUENT 6.2.