The impact of changes to the graduated driver licensing program in Queensland, Australia on the experiences of learner drivers

Purpose: Graduated driver licensing (GDL) has been introduced in numerous jurisdictions in Australia and internationally in an attempt to ameliorate the significantly greater risk of death and injury for young novice drivers arising from road crashes. The GDL program in Queensland, Australia, was extensively modified in July 2007. This paper reports the driving and licensing experiences of Learner drivers progressing through the current-GDL program, and compares them to the experiences of Learners who progressed through the former-GDL program. ----- ----- Method: Young drivers (n = 1032, 609 females, 423 males) aged 17 to 19 years (M = 17.43, SD = 0.67) were recruited as they progressed from a Learner to a Provisional driver’s licence. They completed a survey exploring their sociodemographic characteristics, driving and licensing experiences as a Learner. Key measures for a subsample (n = 183) of the current-GDL drivers were compared with the former-GDL drivers (n = 149) via t-tests and chi-square analyses. ----- ----- Results: As expected, Learner drivers progressing through the current-GDL program gained significantly more driving practice than those in the former program, which was more likely to be provided by mothers than in the past. Female learners in the current-GDL program reported less difficulty obtaining supervision than those in the former program. The number of attempts needed to pass the practical driving assessment did not change, nor did the amount of professional supervision. The current-GDL Learners held their licence for a significantly longer duration than those in the former program, with the majority reporting that their Logbook entries were accurate on the whole. Compared to those in the former program, a significantly smaller proportion of male current-GDL Learners reported being detected for a driving offence while the females reported significantly lower crash involvement. Most current-GDL drivers reported undertaking their supervised practice at the end of the Learner period. ----- ----- Conclusions: The enhancements to the GDL program in Queensland appear to have achieved many of their intended results. The current-GDL learners participating in the study reported obtaining a significantly greater amount of supervised driving experience compared to former-GDL learners. Encouragingly, the current-GDL Learners did not report any greater difficulty in obtaining supervised driving practice, and there was a decline in the proportion of current-GDL Learners engaging in unsupervised driving. In addition, the majority of Learners do not appear to be attempting to subvert logbook recording requirements, as evidenced by high rates of self-reported logbook accuracy. The results have implications for the development and the evaluation of GDL programs in Australia and around the world.

Thrown in the deep end : newcomers and public sector reform

Triggered by the continuing global financial crisis, most public administration systems internationally are reviewing their ability to meet public expectations in more challenging strategic environments, while satisfying the pressure from their political masters to drive down the costs of public administration. Consequently public sector organizations are under constant pressure to reform to meet not only the global economic challenges, but the need for more responsive government (Brown et al 2003). Doyle et al (2000) propose that organizational change is seldom well managed, but that the public sector faces greater difficulty in implementing corporate change than the private sector because of its unique environment, e.g. the need to deliver bureaucratically impartial outcomes. The scale of the changes required, and the constraints imposed by the context within which these changes need to occur, have intensified the need for capable public sector leadership and management. The types of capability required now extend beyond those typically required in public organizations through the efficiency drive of new public management. Acquiring these capabilities remains a key issue for public organizations. One challenge for public management, then, is leadership and management quality, including the need to recruit externally to refresh, re-energize and change the sector and its individual organizations as well as develop advanced skills among existing senior executives.

Bushfire sustainability : Strategies for reconciling bushfire and biodiversity with daily life

This exhibition and catalogue provides a visual record of student work exhibited at the Australian Institute of Architects offices in Brisbane from November 15 to 29, 2010. The exhibition features the final design outcomes of the inaugural Bushfire Sustainability unit conducted at QUT in semester two, 2010. The core objective of this unit was to develop our students’ skills in collaborative practice in design, research and presentation. The theme of ‘bushfire sustainability’ was chosen because living sustainably in bushfire prone landscapes presents a number of problems, the nature of which might only be resolved via multidisciplinary collaboration among the design disciplines. The students involved represent the disciplines of Interior Design, Landscape Architecture, Industrial Design, Architecture and Sustainability – all from within the School of Design at QUT. 55 students, mostly in their third year of study, worked in teams of five (one from each discipline) to design one of a number of homes in highly bushfire prone sites in either Western Australia or SE Queensland. This year level and the interdisciplinary mix are perhaps the best placed to resolve these problems: being unrestrained from the burdens of professional practice and technical overload they retain the potential for innovative, lateral thinking across the range of spatial scales and philosophical perspectives associated with inhabitation of bushfire prone landscapes. It is envisaged that, through the ‘vehicle’ of this design research, that the students’ work will contribute to understandings of how creative design disciplines might respond to this significant national problem, which hitherto has been attended to primarily by engineering and the sciences.

Relational contracting and its efficacy of project performance in the Australian construction industry

The Australian construction industry is characterized as being a competitive and risky business environment due to lack of cooperation, insufficient trust, ineffective communication and adversarial relationships which are likely lead to poor project performance. Relational contracting (RC) is advocated by literature as an innovative approach to improve the procurement process in the construction industry. Various studies have collectively added to the current knowledge of known RC norms, but there seem to be little effort on investigating the determinants of RC and its efficacy on project outcomes. In such circumstances, there is lack of evidence and explanation on the manner on how these issues lead to different performance. Simultaneously, the New Engineering Contract (NEC) that embraced the concept of RC is seen as a modern way of contracting and also considered as one of the best approaches to the perennial problem of improving adversarial relationships within the industry. The reality of practice of RC in Australia is investigated through the lens of the NEC. A synthesis of literature views on the concept, processes and tools of RC is first conducted to develop the framework of RC. A case study approach is proposed for an in-depth analysis to explore the critical issues addressed by RC in relation to project performance. Understanding the realities of RC will assist stakeholders in the construction industry with their investment in RC.

Achieving a responsive industrial relations environment for construction industry workers – a project alliancing case study

This paper outlines how the project agreement operating on the Australian National Museum project in Canberra, Australia facilitated a responsible and responsive workplace environment for construction workers. A project alliancing approach was adopted and designed to encourage industrial relations innovation in the workplace. The trigger for this approach was the perceived success of the alliancing working arrangements between key project delivery teams and a desire to extend this arrangement to subcontractors, suppliers and the workforce. Changes in the Australian workplace relations environment and introduction of a national code of practice for the Australian construction industry provided impetus for reaching a new type of workplace agreement. The workplace culture and characteristics of relationships formed between workers and management on that site shaped the agreed terms and conditions of work. It also spurred the pursuit of innovative approaches to project delivery from a technology, management and workplace culture perspective.

Understanding the factors influencing safe and unsafe motorcycle rider intentions

The increasing popularity of motorcycles in Australia is a significant concern as motorcycle riders represent 15% of all road fatalities and an even greater proportion of serious injuries. This study assessed the psychosocial factors influencing motorcycle riders’ intentions to perform both safe and risky riding behaviours. Using an extended theory of planned behaviour (TPB), motorcycle riders (n = 229) from Queensland, Australia were surveyed to assess their riding attitudes, subjective norm (general and specific), perceived behavioural control (PBC), group norm, self-identity, sensation seeking, and aggression, as well as their intentions, in relation to three safe (e.g., handle my motorcycle skilfully) and three risky (e.g., bend road rules to get through traffic) riding behaviours. Although there was variability in the predictors of intention across the behaviours, results revealed that safer rider intentions were most consistently predicted by PBC, while riskier intentions were predicted by attitudes and sensation seeking. The TPB was able to explain a greater proportion of the variance for intentions to perform risky behaviours. Overall, this study has provided insight into the complexity of factors contributing to rider intentions and suggests that different practical strategies need to be adopted to facilitate safer and reduce risky rider decisions.

Biaxial cell stimulation : a mechanical validation

To analyse mechanotransduction resulting from tensile loading under defined conditions, various devices for in vitro cell stimulation have been developed. This work aimed to determine the strain distribution on the membrane of a commercially available device and its consistency with rising cycle numbers, as well as the amount of strain transferred to adherent cells. The strains and their behaviour within the stimulation device were determined using digital image correlation (DIC). The strain transferred to cells was measured on eGFP-transfected bone marrow-derived cells imaged with a fluorescence microscope. The analysis was performed by determining the coordinates of prominent positions on the cells, calculating vectors between the coordinates and their length changes with increasing applied tensile strain. The stimulation device was found to apply homogeneous (mean of standard deviations approx. 2% of mean strain) and reproducible strains in the central well area. However, on average, only half of the applied strain was transferred to the bone marrow-derived cells. Furthermore, the strain measured within the device increased significantly with an increasing number of cycles while the membrane's Young's modulus decreased, indicating permanent changes in the material during extended use. Thus, strain magnitudes do not match the system readout and results require careful interpretation, especially at high cycle numbers.

Mechanical Behavior of Articular Cartilage After Osteochondral Autograft Transfer in an Ovine Model

BACKGROUND: Grafting of autologous hyaline cartilage and bone for articular cartilage repair is a well-accepted technique. Although encouraging midterm clinical results have been reported, no information on the mechanical competence of the transplanted joint surface is available. HYPOTHESIS: The mechanical competence of osteochondral autografts is maintained after transplantation. STUDY DESIGN: Controlled laboratory study. METHODS: Osteochondral defects were filled with autografts (7.45 mm in diameter) in one femoral condyle in 12 mature sheep. The ipsilateral femoral condyle served as the donor site, and the resulting defect (8.3 mm in diameter) was left empty. The repair response was examined after 3 and 6 months with mechanical and histologic assessment and histomorphometric techniques. RESULTS: Good surface congruity and plug placement was achieved. The Young modulus of the grafted cartilage significantly dropped to 57.5% of healthy tissue after 3 months (P < .05) but then recovered to 82.2% after 6 months. The aggregate and dynamic moduli behaved similarly. The graft edges showed fibrillation and, in some cases (4 of 6), hypercellularity and chondrocyte clustering. Subchondral bone sclerosis was observed in 8 of 12 cases, and the amount of mineralized bone in the graft area increased from 40% to 61%. CONCLUSIONS: The mechanical quality of transplanted cartilage varies considerably over a short period of time, potentially reflecting both degenerative and regenerative processes, while histologically signs of both cartilage and bone degeneration occur. CLINICAL RELEVANCE: Both the mechanically degenerative and restorative processes illustrate the complex progression of regeneration after osteochondral transplantation. The histologic evidence raises doubts as to the long-term durability of the osteochondral repair.

Endochondral ossification in vitro is influenced by mechanical bending

Bone development is influenced by the local mechanical environment. Experimental evidence suggests that altered loading can change cell proliferation and differentiation in chondro- and osteogenesis during endochondral ossification. This study investigated the effects of three-point bending of murine fetal metatarsal bone anlagen in vitro on cartilage differentiation, matrix mineralization and bone collar formation. This is of special interest because endochondral ossification is also an important process in bone healing and regeneration. Metatarsal preparations of 15 mouse fetuses stage 17.5 dpc were dissected en bloc and cultured for 7 days. After 3 days in culture to allow adherence they were stimulated 4 days for 20 min twice daily by a controlled bending of approximately 1000-1500 microstrain at 1 Hz. The paraffin-embedded bone sections were analyzed using histological and histomorphometrical techniques. The stimulated group showed an elongated periosteal bone collar while the total bone length was not different from controls. The region of interest (ROI), comprising the two hypertrophic zones and the intermediate calcifying diaphyseal zone, was greater in the stimulated group. The mineralized fraction of the ROI was smaller in the stimulated group, while the absolute amount of mineralized area was not different. These results demonstrate that a new device developed to apply three-point bending to a mouse metatarsal bone culture model caused an elongation of the periosteal bone collar, but did not lead to a modification in cartilage differentiation and matrix mineralization. The results corroborate the influence of biophysical stimulation during endochondral bone development in vitro. Further experiments with an altered loading regime may lead to more pronounced effects on the process of endochondral ossification and may provide further insights into the underlying mechanisms of mechanoregulation which also play a role in bone regeneration.

In situ preparation and protein delivery of silicate/alginate composite microspheres with core-shell structure

It is predicted that with increased life expectancy in the developed world, there will be a greater demand for synthetic materials to repair or regenerate lost, injured or diseased bone (Hench & Thompson 2010). There are still few synthetic materials having true bone inductivity, which limits their application for bone regeneration, especially in large-size bone defects. To solve this problem, growth factors, such as bone morphogenetic proteins (BMPs), have been incorporated into synthetic materials in order to stimulate de novo bone formation in the center of large-size bone defects. The greatest obstacle with this approach is that the rapid diffusion of the protein from the carrier material, leading to a precipitous loss of bioactivity; the result is often insufficient local induction or failure of bone regeneration (Wei et al. 2007). It is critical that the protein is loaded in the carrier material in conditions which maintains its bioactivity (van de Manakker et al. 2009). For this reason, the efficient loading and controlled release of a protein from a synthetic material has remained a significant challenge. The use of microspheres as protein/drug carriers has received considerable attention in recent years (Lee et al. 2010; Pareta & Edirisinghe 2006; Wu & Zreiqat 2010). Compared to macroporous block scaffolds, the chief advantage of microspheres is their superior protein-delivery properties and ability to fill bone defects with irregular and complex shapes and sizes. Upon implantation, the microspheres are easily conformed to the irregular implant site, and the interstices between the particles provide space for both tissue and vascular ingrowth, which are important for effective and functional bone regeneration (Hsu et al. 1999). Alginates are natural polysaccharides and their production does not have the implicit risk of contamination with allo or xeno-proteins or viruses (Xie et al. 2010). Because alginate is generally cytocompatible, it has been used extensively in medicine, including cell therapy and tissue engineering applications (Tampieri et al. 2005; Xie et al. 2010; Xu et al. 2007). Calcium cross-linked alginate hydrogel is considered a promising material as a delivery matrix for drugs and proteins, since its gel microspheres form readily in aqueous solutions at room temperature, eliminating the need for harsh organic solvents, thereby maintaining the bioactivity of proteins in the process of loading into the microspheres (Jay & Saltzman 2009; Kikuchi et al. 1999). In addition, calcium cross-linked alginate hydrogel is degradable under physiological conditions (Kibat PG et al. 1990; Park K et al. 1993), which makes alginate stand out as an attractive candidate material for the protein carrier and bone regeneration (Hosoya et al. 2004; Matsuno et al. 2008; Turco et al. 2009). However, the major disadvantages of alginate microspheres is their low loading efficiency and also rapid release of proteins due to the mesh-like networks of the gel (Halder et al. 2005). Previous studies have shown that a core-shell structure in drug/protein carriers can overcome the issues of limited loading efficiencies and rapid release of drug or protein (Chang et al. 2010; Molvinger et al. 2004; Soppimath et al. 2007). We therefore hypothesized that introducing a core-shell structure into the alginate microspheres could solve the shortcomings of the pure alginate. Calcium silicate (CS) has been tested as a biodegradable biomaterial for bone tissue regeneration. CS is capable of inducing bone-like apatite formation in simulated body fluid (SBF) and its apatite-formation rate in SBF is faster than that of Bioglass® and A-W glass-ceramics (De Aza et al. 2000; Siriphannon et al. 2002). Titanium alloys plasma-spray coated with CS have excellent in vivo bioactivity (Xue et al. 2005) and porous CS scaffolds have enhanced in vivo bone formation ability compared to porous β-tricalcium phosphate ceramics (Xu et al. 2008). In light of the many advantages of this material, we decided to prepare CS/alginate composite microspheres by combining a CS shell with an alginate core to improve their protein delivery and mineralization for potential protein delivery and bone repair applications

Announcement and enactment of legislation improve children’s car seating positions

Purpose: Evaluate effectiveness of new legislation Are children more likely to sit in the rear seat now than previously? ----- Are they more likely to wear an age-appropriate restraint? How easy is it for parents to comply (what are the barriers)?----- What more can be done? ----- ----- Design: 2 studies Study 1-observational 3 time phases (pre-legislation; post announcement; post enactment)----- Study 2-intercept interviews 2 time phases (post announcement; post enactment, same parents)----- Three data collection phases: T1 (before announcement, 2007) T2 (after announcement but before enactment, 2009-10) T3 (after the enactment, 2010)----- Two regional cities: Toowoomba, Rockhampton----- Site types Schools, shopping areas

The psychological distress of the young driver : a brief report

Objective: To explore the role of psychological distress in the self-reported risky driving of young novice drivers. Design: Cross-sectional online survey of 761 tertiary students aged 17-25 years with an intermediate (Provisional) driving licence who completed Kessler’s Psychological Distress Scale and the Behaviour of Young Novice Drivers Scale. Setting: Queensland, Australia, August-October 2009. Main outcome measures: Psychological distress, risky driving. Results: Regression analyses revealed that psychological distress uniquely explained 8.5% of the variance in young novice’s risky driving, with adolescents experiencing psychological distress also reporting higher levels of risky driving. Psychological distress uniquely explained a significant 6.7% and 9.5% of variance in risky driving for males and females respectively. Conclusions: Medical practitioners treating adolescents who have been injured through risky behaviour need to aware of the potential contribution of psychological distress, whilst mental health professionals working with adolescents experiencing psychological distress need to be aware of this additional source of potential harm. The nature of the causal relationships linking psychological distress and risky driving behaviour are not yet fully understood, indicating a need for further research so that strategies such as screening can be investigated.

Diversity in action : minority group media and social change

This audio magazine, written by Melissa Giles, features three Brisbane-based media organisations: Radio 4RPH, Queensland Pride and 98.9FM. [#1 - INTRODUCTION - read by Sara Cowling]----- [#2 - RADIO 4RPH: SHARING THE WORD - read by Ellen-Maree Elliot (and Sara Cowling)]----- [#3 - QUEENSLAND PRIDE: OUT IN THE STREET - read by Dominique Wiehahn (and Sara Cowling)]----- [#4 - 98.9FM: BREAKING THE MOULD - read by Paige Ross (and Sara Cowling)]----- [#5 - CONCLUSION - read by Sara Cowling]

Overcoming the organ donation dilemma

A book review of: Jason T. Siegel and Eusebio M. Alvaro Understanding organ donation: Applied behavioral science perspectives. Wiley-Blackwell, 2010, 392 pp. US$124.95 (hbk); ISBN 978-1-4051-9213-2