Influence of tobacco smoke on carcinogenic PAH composition in indoor PM10 and PM2.5

Because of the mutagenic and/or carcinogenic properties, Polycyclic Aromatic Hydrocarbons (PAH), have a direct impact on human population. Consequently, there is a widespread interest in analysing and evaluating the exposure to PAH in different indoor environments, influenced by different emission sources. The information on indoor PAH is still limited, mainly in terms of PAH distribution in indoor particles of different sizes; thus, this study evaluated the influence of tobacco smoke on PM10 and PM2.5 characteristics, namely on their PAH compositions, with further aim to understand the negative impact of tobacco smoke on human health. Samples were collected at one site influenced by tobacco smoke and at one reference (non-smoking) site using low-volume samplers; the analyses of 17 PAH were performed by Microwave Assisted Extraction combined with Liquid Chromatography (MAE–LC). At the site influenced by tobacco smoke PM concentrations were higher 650% for PM10, and 720% for PM2.5. When influenced by smoking, 4 ring PAH (fluoranthene, pyrene, and chrysene) were the most abundant PAH, with concentrations 4600–21 000% and 5100–20 800% higher than at the reference site for PM10 and PM2.5, respectively, accounting for 49% of total PAH (SPAH). Higher molecular weight PAH (5–6 rings) reached concentrations 300–1300% and 140–1700% higher for PM10 and PM2.5, respectively, at the site influenced by tobacco smoke. Considering 9 carcinogenic PAH this increase was 780% and 760% in PM10 and PM2.5, respectively, indicating the strong potential risk for human health. As different composition profiles of PAH in indoor PM were obtained for reference and smoking sites, those 9 carcinogens represented at the reference site 84% and 86% of SPAH in PM10 and PM2.5, respectively, and at the smoking site 56% and 55% of SPAH in PM10 and PM2.5, respectively. All PAH (including the carcinogenic ones) were mainly present in fine particles, which corresponds to a strong risk for cardiopulmonary disease and lung cancer; thus, these conclusions are relevant for the development of strategies to protect public health.

Influencing factors on bread-derived exposure to ochratoxin A: type, origin and composition

The nearly ubiquitous consumption of cereals all over the world renders them an important position in international nutrition, but concurrently allocates exposure to possible contained contaminants. Mycotoxins are natural food contaminants, difficult to predict, evade, and reduce, so it is important to establish the real contribution of each contaminated food product, with the aim to evaluate mycotoxin exposure. This was the key objective of this survey and analysis for ochratoxin A content on 274 samples of commercialized bread in the Portuguese market, during the winter 2007. Different bread products were analyzed through an HPLC-FD method, including traditional types, novel segments, and different grain based bread products. A wide-ranging low level contamination was observed in all regions and types of bread products analyzed, especially in the Porto and Coimbra regions, and in the maize and whole-grain or fiber-enriched bread. Nevertheless, the exposure through contaminated wheat bread continues to be the most significant, given its high consumption and dominance in relation to the other types of bread.

Uma dramaturgia da viagem: registos de uma experiência [TheaterSpielhaus]: relatório de estágio

Mestrado Teatro, especialização em artes performativas, interpretação

Angolan cymbopogon citratus used for therapeutic benefits: nutritional composition and influence of solvents in phytochemicals content and antioxidant activity of leaf extracts

Folk medicine is a relevant and effective part of indigenous healthcare systems which are, in practice, totally dependent on traditional healers. An outstanding coincidence between indigenous medicinal plant uses and scientifically proved pharmacological properties of several phytochemicals has been observed along the years. This work focused on the leaves of a medicinal plant traditionally used for therapeutic benefits (Angolan Cymbopogon citratus), in order to evaluate their nutritional value. The bioactive phytochemical composition and antioxidant activity of leaf extracts prepared with different solvents (water, methanol and ethanol) were also evaluated. The plant leaves contained ~60% of carbohydrates, protein (~20%), fat (~5%), ash (~4%) and moisture (~9%). The phytochemicals screening revealed the presence of tannins, flavonoids, and terpenoids in all extracts. Methanolic extracts also contained alkaloids and steroids. Several methods were used to evaluate total antioxidant capacity of the different extracts (DPPH; NO; and H2O2 scavenging assays, reducing power, and FRAP). Ethanolic extracts presented a significantly higher antioxidant activity (p < 0.05) except for FRAP, in which the best results were achieved by the aqueous extracts. Methanolic extracts showed the lowest radical scavenging activities for both DPPH; and NO; radicals.

Condiciones de salud y de trabajo informal en recuperadores ambientales del área rural de Medellín, Colombia, 2008

OBJETIVO: Caracterizar las condiciones de trabajo, salud y riesgos ocupacionales de recuperadores ambientales del área rural de Medellín. MÉTODOS: Estudio transversal con cien recuperadores ambientales informales en cinco corregimientos de Medellín en 2008. La fuente de información fue primaria: una encuesta estructurada sobre condiciones de trabajo, salud, riesgos ocupacionales y morbilidad sentida, que permitió caracterizar los riesgos de la población mediante estadística descriptiva y un acercamiento a las relaciones y asociaciones de los riesgos con la morbilidad en la población. RESULTADOS: Ciento cuatro personas ejercían el reciclaje, y 100 de estos se incluyeron en el estudio: 34 personas agremiadas en organizaciones de base comunitaria y 66 personas que ejercían la labor independientemente. La afiliación a seguridad social, suplencia de necesidades básicas, satisfacción en la labor, recibir capacitaciones y suministro periódico de elementos para su trabajo presentaron diferencias según grupo (p < 0,05). Los riesgos biológicos, relacionados con postura corporal inadecuada, riesgos físicos y químicos, tuvieran frecuencia particular de exposición según grupo. El conocimiento y uso de las medidas de protección para los riesgos de la labor difirieron estadísticamente entre los grupos (p < 0,05). CONCLUSÕES: Los recuperadores son potencial apoyo para la gestión integral de residuos en áreas rurales de Medellín, aunque su carácter informal los expone a condiciones de trabajo que repercuten directamente en su salud y la de sus familias. El reconocimiento social del reciclaje va de la mano con la mejora de las condiciones laborales de las personas dedicadas a esta actividad. Los recuperadores ambientales, aun agremiados, tienen condiciones laborales y de salud precarias. La trasformación de estas condiciones debería ser una de las prioridades del Estado.

Comparação técnica da conceção/solução de projetos de climatização para um hotel rural

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia com a Especialidade em Energia, Climatização e Refrigeração

Tissue composition and density impact on the clinical parameters for 125I prostate implants dosimetry

The MCNPX code was used to calculate the TG-43U1 recommended parameters in water and prostate tissue in order to quantify the dosimetric impact in 30 patients treated with (125)I prostate implants when replacing the TG-43U1 formalism parameters calculated in water by a prostate-like medium in the planning system (PS) and to evaluate the uncertainties associated with Monte Carlo (MC) calculations. The prostate density was obtained from the CT of 100 patients with prostate cancer. The deviations between our results for water and the TG-43U1 consensus dataset values were -2.6% for prostate V100, -13.0% for V150, and -5.8% for D90; -2.0% for rectum V100, and -5.1% for D0.1; -5.0% for urethra D10, and -5.1% for D30. The same differences between our water and prostate results were all under 0.3%. Uncertainties estimations were up to 2.9% for the gL(r) function, 13.4% for the F(r,θ) function and 7.0% for Λ, mainly due to seed geometry uncertainties. Uncertainties in extracting the TG-43U1 parameters in the MC simulations as well as in the literature comparison are of the same order of magnitude as the differences between dose distributions computed for water and prostate-like medium. The selection of the parameters for the PS should be done carefully, as it may considerably affect the dose distributions. The seeds internal geometry uncertainties are a major limiting factor in the MC parameters deduction.

Processo de formação e processo de desenvolvimento: contributo para a compreensão do processo de mudança de atitude num projecto de desenvolvimento rural integrado

Dissertação de mestrado em Ciências da Educação: área de Educação e Desenvolvimento

Dos percursos de autoformação aos processos de transformação: uma produção singular de sucesso educativo em meio rural

Dissertação de mestrado em Ciências da Educação: área de Educação e Desenvolvimento

Identidade do jovem rural confrontando com estereótipo de Jeca Tatu: um estudo qualitativo com os jovens da EFA Rei Alberto I

Dissertação de mestrado em Ciências da Educação, na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa e do Diplôme d' Université François Rabelais de Tours

A escola de ensino fundamental rural no desenvolvimento do seu meio: um estudo comparativo

Dissertação de mestrado em Ciências da Educação, na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa e do Diplôme d' Université François Rabelais de Tours

Evaluación del programa brasileno de biodiésel como fuente de desarrollo rural sostenible para la región semiárida del Nordeste de Brasil

Debido a preocupaciones ambientales y de abastecimiento de energía, se buscan alternativas renovables al petróleo. En 2004, fue lanzado, en Brasil, el Programa Nacional de Producción y Uso de Biodiésel con el objetivo de sustituir el diesel y fomentar la inclusión social de los agricultores familiares, especialmente de las regiones más pobres. El biodiésel representaría así una nueva fuente de renta y de desarrollo sostenible para las zonas productoras de oleaginosas. A partir del estudio realizado en la región Semiárida del Estado de Ceará, se observó que la baja remuneración de la producción agrícola y el reducido número de empleos generados hacen del mercado del biodiésel un suplemento de la renta familiar. Ambientalmente, la durabilidad se ve comprometida por el problema endémico de la sequía – agravado por el cambio climático – y las prácticas agrícolas tradicionales. Parece igualmente necesario fomentar los cultivos cuya producción, tradición cultural y uso potencial sean compatibles con la lógica de la agricultura familiar. En definitiva, el programa, a través del Sello Combustible Social, representaría un componente de una matriz de políticas para el desarrollo rural sostenible de la agricultura familiar, entre las cuales estarían la adaptación del sistema productivo y de apoyo y acceso a la tierra.

Chemical composition and antioxidante activity of Tunisian Origanum glandulosum Desf. essential oil and volatile oil obtain by supercritical CO2 extraction

Dried flowers and leaves of Origanum glandulosum Desf. were submitted to hydrodistillation (HD) and supercritical fluid extraction with CO2 (SFE). The essential oils isolated by HD and volatile oils obtained by SFE were analysed by GC and GC/MS. Total phenolics content and antioxidant effectiveness were performed. The main components of the essential oils from Bargou and Nefza were: p-cymene (40.4% and 39%), thymol (38.7% and 34.4%) and γ- terpinene (12.3% and 19.2%), respectively. The major components obtain by SFE in the volatile oil, from Bargou and Nefza, were: p-cymene (32.3% and 36.2%), thymol (41% and 40%) and γ-terpinene (20.3% and 13.3%). Total phenolic content, expressed in gallic acid equivalent (GAE) g kg-1 dry weight, varied from 12 to 27 g kg-1 dw, and the ability to scavenge the DPPH radicals, expressed by IC50 ranged from 44 to143 mg L-1.

The effect of metal transfer modes and shielding gas composition on the emission of ultraafine particles in MAG steel welding

The present study aims to characterize ultrafine particles emitted during gas metal arc welding of mild steel and stainless steel, using different shielding gas mixtures, and to evaluate the effect of metal transfer modes, controlled by both processing parameters and shielding gas composition, on the quantity and morphology of the ultrafine particles. It was found that the amount of emitted ultrafine particles (measured by particle number and alveolar deposited surface area) are clearly dependent from the main welding parameters, namely the current intensity and the heat input of the Welding process. The emission of airborne ultrafine particles increases with the current intensity as fume formation rate does. When comparing the shielding gas mixtures, higher emissions were observed for more oxidizing mixtures, that is, with higher CO2 content, which means that these mixtures originate higher concentrations of ultrafine particles (as measured by number of particles. by cubic centimeter of air) and higher values of alveolar deposited surface area of particles, thus resulting in a more hazardous condition regarding welders exposure.

The effect of metal transfer stability (spattering) on fume generation, morphology and composition in short-circuit MAG welding

The main objective of this work was to evaluate the hypothesis that the greater transfer stability leads also to less volume of fumes. Using an Ar + 25%CO2 blend as shielding gas and maintaining constant the average current, wire feed speed and welding speed, bead-on-plate welds were carried out with plain carbon steel solid wire. The welding voltage was scanned to progressively vary the transfer stability. Using two conditions of low stability and one with high stability, fume generation was evaluated by means of the AWS F1.2:2006 standard. The influence of these conditions on fume morphology and composition was also verified. A condition with greater transfer stability does not generate less fume quantity, despite the fact that this condition produces fewer spatters. Other factors such as short-circuit current, arcing time, droplet diameters and arc length are the likely governing factors, but in an interrelated way. Metal transfer stability does not influence either the composition or the size/morphology of fume particulates. (c) 2014 Elsevier B.V. All rights reserved.